All Products

Ultima X 5000 Hydrogen Sulfide by MSA

The ULTIMA® X5000 Gas Monitor is the future of gas detection for oxygen, toxic and combustible gases. MSA XCell® gas sensors with TruCal® technology offer calibration cycles up to 24 months (local calibration respected). The gas transmitter's advanced, multi-lingual OLED display is easy to read and the unique touch-screen interface makes it simple to navigate.

FEATURES:

• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway
• Three-year warranty on XCell sensors
• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• An industry first, Diffusion Supervision warns if sensor inlet becomes blocked and unable to detect gas
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway

BWC2R-M BW Clip RT 2 Year Single Gas Detector, Carbon Monoxide (CO), (Low 35 ppm / High 200 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-M

BWS1-M2-B BW Solo Single-Gas Detector, (CO-H2 resistant) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-M2-B

Gasman Personal Gas Monitor

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a rechargeable battery or up to 2 years on a non-rechargeable battery.

Making portable single-gas detection simple and efficient.

Compact and accurate

The Honeywell BW™ Solo is extremely user-friendly with a lightweight profile and compact design, coupled with reliability and accuracy.

Low-cost operation over a longer life cycle

Struggling to change out sensors or replace batteries? This is no longer a concern with the Honeywell BW™ Solo. Just pop off the compartment lid to change the sensor filter, with the battery and sensor also easy to replace.

Sensors for standard and exotic gas

Whether you need to test a single gas in a petrochemical plant or a steel manufacturing facility, the Honeywell BW™ Solo offers the right sensor for the job. In addition to oxygen, hydrogen, ammonia, and sulfur dioxide, the detector has sensors for:

• Hydrogen sulfide (H₂S)
• Carbon monoxide (CO)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ozone (O₃)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

A single-gas detector using the revolutionary 1-Series sensor for increased safety, accuracy and cost-savings.

Ideal for monitoring the most monitored gases, the next-generation 1-Series sensor is designed to continue to provide accuracy and reliability even in harsh and challenging environments.

Standard Gases – Fast Response

The 1-Series sensor offers a rapid diffusion square design and a height that is just a third of other sensors on the market. In a compact package, it is able to detect CO, H₂S, and O₂, with more gas types on the way.

Reduced cost of ownership with a 3-year warranty and 5-year sensor life.

With typical gas detection use, the 1-Series sensor performs for up to 5-years, eliminating the cost of replacement and downtime issues with other sensors. Coupled with a 3-year warranty, this provides confidence in investing in this technology.

Developed by Honeywell

As one of the Honeywell companies, City Technology developed the 1-Series sensor for quality and performance. City Technologies has 4 decades in the industry and produced the 40XXV and the 40xLL oxygen sensors that are used in the BW detectors by Honeywell.

Accuracy and reliability

Easy sensor replacement

Need to change out sensors in the field? With the 1-Series sensor, it is as simple as taking out the old and putting in the new, no breakdown or reassembly required.

Managing Data and Automating Fleet Management Made Easy

Combining the Honeywell BW™ Solo with the Honeywell SafetySuite Device Configurator software and the IntelliDox maximizes compliance, productivity, and safety.

Managing data, configurating and recordkeeping with IntelliDox

The IntelliDox docking station allows easy data transfer with automated actions to transfer test results, complete bump tests, set bump reminders, complete calibration, and modifying set points as well as managing firmware updates. The software also provides transfer of all data, including peak readings and alarms, using an Ethernet or USB connection.

Multiple detectors are no problem. The IntelliDox docks can be grouped in numbers up to five, each with its own LCD screen, pump, and keypad, while sharing power and calibration gas for increased efficiency.

Concise compliance monitoring with Device Configurator

Device Configurator is Windows-based software that allows you to configure alarms, view and transfer data, and to manage all firmware updates from your computer - leading to increased compliance across all sites.

Moving to the Cloud

Yet another option to consider is the use of the cloud-based subscription offered through the Honeywell SafetySuite Device Manager. This allows you to use the cloud to:

• Customize and use specific features to streamline compliance
• Create reports as needed
• Receive email or text messages of alarms in real-time
• Have the ability to see all detectors across multiple sites in a user-friendly dashboard, allowing for immediate response to potential or real concerns

An app for detector setup, configuration and verification of test data.

Any smartphone can be linked to the Honeywell BW™ Solo, and with the use of the Device Configurator app, the Honeywell BW™ Solo can be configured, set points established, firmware updated and many more actions.

This is all done using Bluetooth Low Energy (BLE), which also provides the option to see bump data and calibration results, including who did the last calibration, when it was done, and what the readings were. This data can be entered into a certificate and sent to those requiring the data.

Decease equipment needs by skipping the docking station.

By choosing the wireless connection through the smartphone app, there is no need to have docking stations. The same BLE is used to transfer data from the detector to the desktop software, making it a practical solution for fleet management.

Make safety monitoring effective.

Using the Safety Communicator app allows the safety manager to track data from detectors without needed to be docked. Once paired with the smartphone, the app sends the required readings to a Honeywell monitoring software system, which is then accessed by internet-connected devices. This allows for complete tracking of worker location and safety issues.

Become compliance confident across the operation.

Easy to use detector

In any type of environment, the Honeywell BW™ Solo is designed for easy use. It can be controlled by a one-button system on the job or managed by the Honeywell SafetySuite Device Configurator software. In addition to configuring the detector, measurements on short-term exposure limits (STEL) and time-weighted average (TWA), along with peak gas detection readings, are all easy to access.

Visible compliance or out of compliance status

For easy visibility in any type of environment, the Honeywell BW™ Solo is equipped with the IntelliFlash™ system. This provides a blinking green light for compliance, meaning the detector is monitoring and has been bump tested.

Red flashing lights mean out of compliance. This may include a gas event, the requirement for calibration, or the need for a new battery. With both options available, you can choose the option best suited for the job.

Visual and Auditory Alarms

In addition to a loud, robust alarm, the detector also has LEDs around the detector that flash red during an alarm. The detector also vibrates, making it noticeable in any environment.

Practical Operation and Configuration

Keeping track made easy.

To quickly identify a worker or a location where a detector is used or in the event of an alarm, assign detectors throughout the workplace.

Rolling Peak Gas Readings

The Honeywell BW™ Solo is able to maintain a 24-hour rolling peak reading of the gas you want to detect. This allows control of sub-alarm levels that may be associated with problems.

Common Languages

The Honeywell BW™ Solo can be configured to display gas readings in major languages for use around the world.

Part Number: BWS1-HL-Y

BWC2-H-B50 BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S) - 50 Unit bulk pack, Low - 10 ppm / High - 15 ppm by BW Technologies

Do you need safe and dependable hydrogen sulfide detection? How about something that is easy for all the workers to use and is very small and weighs just a little over 3 ounces? The alarm default settings are 10 ppm low and 15 ppm high. This gas monitor is small (it can fit into the palm of your hand) but it is very powerful and maintenance free. Because it is portable and high tech, it's all you need for safe and effective H2S detection and monitoring.

To use the BWC2-H just activate it and turn on the machine. There is nothing else to worry about because the battery never needs to be replaced or recharged. This provides trouble-free service without any downtime. The BWC2-H is designed to run for two entire years. However, it can last as long as three years, when put into hibernation.

The Benefits of Bulk Purchases

IntelliDox Technology Compatible

Standard BWC2-H Features

• No sensor changing
• Simple single button operation
• Can handle very harsh work environments, including high humidity and extreme temperatures
• Hibernation mode when used with IntelliDoX
• Battery and sensor tests themselves
• Easy to see wide angle alarm that flashes red. It is also extremely loud at 95 db, and can vibrate
• Autologging 35 most recent bump tests and H2S readings
• Moisture resistant
• Alarm can be set to as sensitive as 1.6 ppm and as high as 20 ppm
• Very affordable and cost effective H2S monitoring

There are many good reasons to own the BWC2-H. It is simple yet effective. You can set the unit to remind you of bump tests and view the time of day, and it is guaranteed for 2 years.

Part Number: BWC2HB50

123-H2S Gasflag Hydrogen Sulfide, 0-25ppm by Crowcon

Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector. Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.

Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.

Easy and safe to use - Bright alarm annunciator

• Loud internal audible alarm
• Clear sytem intergrity indication

Fully Flexible

• Accepts industry standard 4-20mA inputs
• Multiple units can be daisy chained
• Variable alarm configurations

No hidden costs

• Integral alarm outputs
• Simple installation
• Minimum maintenance
• One button operation

Part Number: PSRH01