Hydrogen Sulfide Monitors

65-2321RK S2 Series Oxygen (O2) 0 - 25% Sensor/Transmitter, (Capillary Type) Non Explosion Proof with J-Box by RKI Instruments

Having a reliable gas sensor is detrimental to the safety and security of workers in potentially unstable work environments. In many cases, the decision to use a gas detection device with a reliable sensor can be the difference between life and death. RKI Instruments understands the reliability of gas sensors should be a top priority for workplace safety managers. Their team of experts works diligently to incorporate the most advanced technologies with the highest industry standards.

For nearly 20 years, RKI Instruments has worked in the gas detection industry. Its line of products leads the industry in innovation and technology. Every year, the company commits to achieving a higher level of productivity and delivering the best gas detection products on the market. With the introduction of their high performing, low cost S2 Sensor Transmitter, RKI is fulfilling that commitment.

S2 Sensor/Transmitter

The RKI S2 Sensors and Transmitters use state of the art sensor technology to detect common gas hazards. Their efficient design and cost effectiveness make them an industry choice for atmospheric monitoring. The sensor transmitters can be used in both indoor and outdoor conditions and are designed to interface with RKI controllers or PLC/DCS systems.

The sensors are available in explosion proof casing for monitoring LEL, H2 specific, oxygen, H2S, CO2, and carbon monoxide. These sensors also have flame arrestors and are approved for use in hazardous environments. The oxygen, H2S, CO, and CO2 sensors are available in non-explosion proof models. The sensors provide highly specific and quick detection and are long lasting. The sensors can be quickly replaced while on the field and do not require any tools.

Explosion proof S2 Sensor/Transmitter

The explosion proof sensors use a variety of detection mechanisms including catalytic for LEL and LEL- H2 specific; metal oxide semiconductor for hydrogen; galvanic cell technology for oxygen; electrochemical for hydrogen sulfide and carbon monoxide; and infrared for carbon dioxide, methane, and hydrocarbons. A hydrogen specific sensor transmitter is not available. Each of these detection methods come with their own measuring range specifications and response times varying from 20 seconds to 45 seconds. These sensors are stainless steel and are housed in a cast aluminum explosion proof J-Box (a stainless steel J-Box is also available).

Non-explosion proof S2 Sensor/Transmitter

The non-explosion proof sensors use galvanic cells for oxygen detection; electrochemical technology for hydrogen sulfide, carbon monoxide, and other toxics; and infrared technology for carbon dioxide detection. The response times vary between 20 seconds and 60 seconds depending on the targeted gas, and the measuring ranges vary as well. These sensors are plastic or aluminum and housed in an explosion proof J-Box.

Accessories

The S2 Sensor/Transmitter has numerous accessories available to meet the individual workplace's needs. Such accessories include calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and data loggers.

Each sensor comes standard with a one year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

XT-00HM-B-AU GasAlertMax XT II 2 Gas Detector, Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Black Housing, AU Version (Australia) by BW Technologies

GasAlertMax XT II is the safest and most economical choice for multi-gas detection systems. Utilizing the most advanced technology on the market, the GasAlertMax accurately and reliably monitors up to four hazardous conditions, and offers a simple user friendly device for easy operation. Its standard safety features and compatibility with other instruments ensure that the gas detector is the best instrument for gas monitoring compliance.

GasAlertMax XT II specifications

The lightweight and portable unit is approximately 11.5 ounces, and features the latest technology allowing for a compact design. With an operational temperature range of -4 to 122 degrees Fahrenheit, the monitor is designed to function effectively in many harsh conditions. The cautionary yellow outer shell helps to ensure that the gas detector is carried with the user not left onsite. Additionally, the durable casing is resistant to water and features a built-in concussion proof boot.

Triple alarm system

The GasAlertMax XT II features a triple alarm system designed to alert users of potentially hazardous conditions. When the gas sensors detect specified levels of H2S, CO, O2, or combustible gases, the instrument will begin the triple alarm alert and notify users and those nearby. The device indicates these dangers with a vibrating alarm, an ultra bright visual alarm, and an audible alarm of over 95 decibels. The alarms are also designed to alert users of administrative needs such as battery replacement.

GasAlertMax XT II features

The GasAlertMax XT II has multi-language support features in English, French, Spanish, German, and Portuguese. The gas detector also has state of the art block detection with semi-conductor pressure sensor, and standard data and event logging. Accessories such as the belt holster, multi-unit cradle charger, and concussion proof boot are also available.

Upon activation, the unit will automatically test sensors, pumps, battery, and circuitry. For additional test and calibration, the GasAlertMax XT II is compatible with the MicroDock II automated test and calibration system and Fleet Manager II. Improving on its functionality, the unit is customizable. Users can change options for forced calibration and tests, safety locks, alarm setpoints, safe display mode, language choices, start-up message, and more.

The easy to read LCD screen displays continuous information about real-time gas concentrations and alarms. To maintain simplicity and ease of use, the GasAlertMax XT II also features a user and glove friendly one touch button for operation. The no-frills design has an added benefit of minimizing cost and user training. This simple, portable, and compact detector is the best instrument for confined spaces or potentially dangerous worksites.

Highest standards of reliability

The typical batter life ranges between 8 and 13 hours depending on the temperature. The durable and long lasting batteries can fully recharge in approximately 6 hours. The GasAlertMax XT II and its sensors feature a standard two year warranty. With safety and reliability as a top priority, BW Technologies has developed the multigas detector to utilize the most advanced technology on the market, while maintaining its simplicity and portability. When working in settings with possible gas exposure, users can be certain that the gas levels are being accurately and reliably monitored with the best technology available.

Part Number: XT00HMBAU

M020-12112-161 QRAE 3 Multigas Monitor by RAE Systems

The QRAE 3 is a full featured compact 4-gas monitor that provides detection and monitoring of Oxygen (O2), Combustibles and toxic gases that include Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Sulfure Dioxide (SO2) and Hydrogen Cyanide (HCN) and others.

QRAE 3 can deliver wireless real-time instrument readings and alarm status 24/7. This provides better incident visibility and can improve response time.

Monitor-only configuration includes

• Monitor as specified
• Sensors as specified
• Sampling option as specified
• Calibration adapter (diffusion model only)
• T Calibration tube (pumped model only)
• Internal filters (mounted - diffusion model only)
• External filters (one mounted plus pack of 3 - pumped model only)
• Travel charger cradle with computer cable
• Lithium-ion battery pack
• Universal wall adapter
• CD ROM with ProRAE Studio II
• CD ROM with product content
• Quick Reference Guide

Key Features

• Available in Diffusion or Pumped version
• IP-65/67 water and dust resistant case
• Strong, protective, concussion-proof design
• Real-time gas concentration readings and alarm status enabled by state-of-the-art wireless technology
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Large graphical display icon-driven user interface through intuitive, simple-to-operate two-button user interface
• Multi-language support: 18 languages encoded
• Easy access to pump, sensors, filter and battery compartment

Applications

• Industrial safety
• Oil and gas
• Fireground "Toxic Twins" detection
• Environmental
• Fire and Emergency response
• Chemical
• Pharmaceutical
• Telecommunications

65-2462RK S2 Series Hydrogen (H2) 0 - 10% Vol Sensor (TC)/Transmitter, Explosion Proof with J-Box by RKI Instruments

Having a reliable gas sensor is detrimental to the safety and security of workers in potentially unstable work environments. In many cases, the decision to use a gas detection device with a reliable sensor can be the difference between life and death. RKI Instruments understands the reliability of gas sensors should be a top priority for workplace safety managers. Their team of experts works diligently to incorporate the most advanced technologies with the highest industry standards.

For nearly 20 years, RKI Instruments has worked in the gas detection industry. Its line of products leads the industry in innovation and technology. Every year, the company commits to achieving a higher level of productivity and delivering the best gas detection products on the market. With the introduction of their high performing, low cost S2 Sensor Transmitter, RKI is fulfilling that commitment.

S2 Sensor/Transmitter

The RKI S2 Sensors and Transmitters use state of the art sensor technology to detect common gas hazards. Their efficient design and cost effectiveness make them an industry choice for atmospheric monitoring. The sensor transmitters can be used in both indoor and outdoor conditions and are designed to interface with RKI controllers or PLC/DCS systems.

The sensors are available in explosion proof casing for monitoring LEL, H2 specific, oxygen, H2S, CO2, and carbon monoxide. These sensors also have flame arrestors and are approved for use in hazardous environments. The oxygen, H2S, CO, and CO2 sensors are available in non-explosion proof models. The sensors provide highly specific and quick detection and are long lasting. The sensors can be quickly replaced while on the field and do not require any tools.

Explosion proof S2 Sensor/Transmitter

The explosion proof sensors use a variety of detection mechanisms including catalytic for LEL and LEL- H2 specific; metal oxide semiconductor for hydrogen; galvanic cell technology for oxygen; electrochemical for hydrogen sulfide and carbon monoxide; and infrared for carbon dioxide, methane, and hydrocarbons. A hydrogen specific sensor transmitter is not available. Each of these detection methods come with their own measuring range specifications and response times varying from 20 seconds to 45 seconds. These sensors are stainless steel and are housed in a cast aluminum explosion proof J-Box (a stainless steel J-Box is also available).

Non-explosion proof S2 Sensor/Transmitter

The non-explosion proof sensors use galvanic cells for oxygen detection; electrochemical technology for hydrogen sulfide, carbon monoxide, and other toxics; and infrared technology for carbon dioxide detection. The response times vary between 20 seconds and 60 seconds depending on the targeted gas, and the measuring ranges vary as well. These sensors are plastic or aluminum and housed in an explosion proof J-Box.

Accessories

The S2 Sensor/Transmitter has numerous accessories available to meet the individual workplace's needs. Such accessories include calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and data loggers.

Each sensor comes standard with a one year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

2901-99-004 IR 29 i Gas Transmitter without Display, with Pressure and Humidity Compensation, IP67, Ethanol (C₂H₆O), 0 - 100% LEL Range by GfG

Measuring Principle

IR transmitters have become recognized as reliable gas warning systems for explosion protection. They are used to detect individual combustible gases or a wide range of gases. This involves sending an IR beam with a certain light intensity through a measuring space and then capturing it with a detector. Parts of this beam are absorbed by, amongst other things, hydrocarbon molecules. The reduced light intensity of the beam is registered by beam detectors and converted into a signal as the existing % LEL gas concentration.

Benefits

A special feature of our IR technology is its ability to also measure combustible gases above the lower explosion limit. Moreover, the measurement does not require oxygen.

With this technology there is basically no risk of contaminating the sensor, through silicone vapors or hydrogen sulfide, when using catalytic combustion sensors.

Operation

IR transmitters are usually used with 2 wavelengths, a so-called reference wavelength and just one measuring wavelength. Strict limits are applied to these systems. The absorption spectra of many hydrocarbons are located in the wavelength range of 3.3 μm and overlap to a large extent.

This means that gases with overlapping spectra and just one measuring wavelength can no longer be clearly distinguished. Some hydrocarbons, e.g. the frequently used welding gas acetylene, are non-absorbing in the wavelength range of 3.3 μm, but absorb instead in neighboring wavelength ranges.

In many practical applications, it is not essentially important which gas is responsible for the explosion risk. Therefore, early warnings through the broadband measurement of hydrocarbons in order to monitor the lower explosion limit (LEL) must be guaranteed. False alarms with uncritical concentrations of individual gases or solvents are thus absolutely unacceptable.

These requirements are problems for systems with 2 wavelengths.

Patented GfG Technology

The internationally patented technology of the IR 29 has been developed to solve these problems. The gold-plated mirror optics of the sensor contains 2 radiators and up to 4 detector elements with different optical filters. The precisely calculated, microstructured and pure gold coated mirror optics of the IR 29 are supplied for the first time without beam splitters.

This helps to cut signal losses by 50 % and to completely avoid the physically-related disadvantages of a beam splitter. The measured values from two additional wavelengths (4 wavelengths in total) ensure improved detection of individual gases and thus enhanced selectivity. This results in the prevention of false alarms. Only a 4 wavelength system always guarantees early warnings and the simultaneous prevention of false alarms.

New Technology

The IR 29 is the first and only intrinsically safe IR gas transmitter with patented 4-beam 4-wavelength technology.

The ignition protection class "intrinsically safe", which is so essential for industrial plants and the mining industry, is achieved by the additional use of the SB1 safety barrier and its internationally patented and innovative design.

Complete Safety Even In Zone 0

The IR 29 is the first IR gas transmitter that can also be used in Ex zone 0 and which enables maintenance as well as replacement of the sensor head without additional expense when energized.

Universal Application

The IR 29 with its robust V4A stainless steel housing has been designed to withstand the harshest environmental conditions.

The application areas of the dust and water-protected structure range from production and storage areas to disposal sites, biogas plants, mines and oil rigs.

Internal Data Logger

A standard built-in data logger records all the measuring data, minimum / maximum values, average values and alarm events of the last 24 hours in a ring buffer.

The recording can also be shown on the display as a 2 and 8 hour trend indicator.

The histogram mode can be selected as a permanent display of the measured values. These values are continuously updated.

Graphical Display

Measured values are shown on the high-contrast graphical display. The display can be rotated 180° depending on the installation of the IR 29.

Self Diagnosis

Processor-based signal processing enables the systematic compensation of temperature dependencies, aging influences and soiling effects. Safety-relevant functions are monitored permanently via self-diagnosis procedures and a possibly required service is indicated automatically. Daily interfering factors, such as dust and dirt accumulation, are almost completely eliminated by the innovative design.

Pressure Sensor, Moisture and Temperature Compensation

The measuring accuracy of IR sensors depends on partial pressure and thus also air pressure. Climatic fluctuations or barometric high pressure therefore influence the measuring result. Furthermore, the absorption spectrum of water almost completely covers that of hydrocarbon absorption in the 2.7 to 3.3 μm range. Air humidity therefore initially generates a measuring signal the same as the actual measuring gas. This cross-sensitivity is of particular importance in warm areas with high relative humidity. An increase in the absolute water absorption capacity of air is not linear with the temperature, i.e. three times as much water can be absorbed at 40 °C than at 20 °C. This influence can only be compensated if the current moisture content of the air is known. The IR 29 can be optionally equipped with a pressure and moisture sensor for compensation.

Maximum Safety

The innovative display enables the realization of completely safe warning concepts.

Local displays and signals directly at the device can be used to provide an early warning of potential risks.

The display at the upstream safety barrier SB1 D enables the detection of risks outside the danger zone being monitored.

This allows immediate on-site action before really hazardous situations occur.

Dust Protection

A gas permeable, water-repellent diaphragm protects the absorption space of the transmitter against dust. The additional impact protection made from robust V4A stainless steel prevents mechanical damage to the optical components.

The diaphragm can be cleaned or replaced in a matter of minutes.

Remote Controls

The IR 29 transmitter does not feature control elements for setting or servicing tasks. This helps to prevent accidental or unauthorized manipulation.

Service work at the IR 29 transmitter is carried out using the RC 2 remote control.

Features

• First intrinsically safe infrared transmitter for explosion protection
• ATEX II 1G Ex ia IIC T4 Ga C0158 can also be used in Ex zone 0
• Temperature, moisture and pressure compensation
• Patented infrared technology (NDIR)
• The energized IR sensor head can be replaced in Ex areas
• Maintenance and service-friendly

3703-100 Dynagard Stand-alone System, Hydrogen Sulfide (H₂S) by GfG

Single-point Area Monitors

Dynagard AutoCal^® monitors are single point detection instruments that accurately measure toxic gases and oxygen levels. Alarm lights on the front panel illuminate and an internal horn sounds when gas concentrations are exceeded.

Simple and effective

The units accurately display values on a large backlit LED and can transmit a linear 4-20 mA output. AutoCal® calibration and maintenance is done effortlessly through front panel push-buttons. Smart sensors enable the user to change measuring ranges or gas types in the field without a need for additional programming. The Dynagard is equipped with onboard relays for two adjustable alarm points. It also has one sensor fault for local connection and activation or deactivation of external devices like strobes, fans, auto dialers etc.

Features

• AutoCal® automatic calibration
• Smart sensor technology
• Digital display / control connection
• Internal push-button alarm settings

65-2335RKSS S2 Series Detector / Amp / Stainless Steel J-box, Non Explosion Proof, CO, 0 - 300 ppm by RKI Instruments

Having a reliable gas sensor is detrimental to the safety and security of workers in potentially unstable work environments. In many cases, the decision to use a gas detection device with a reliable sensor can be the difference between life and death. RKI Instruments understands the reliability of gas sensors should be a top priority for workplace safety managers. Their team of experts works diligently to incorporate the most advanced technologies with the highest industry standards.

For nearly 20 years, RKI Instruments has worked in the gas detection industry. Its line of products leads the industry in innovation and technology. Every year, the company commits to achieving a higher level of productivity and delivering the best gas detection products on the market. With the introduction of their high performing, low cost S2 Sensor Transmitter, RKI is fulfilling that commitment.

S2 Sensor/Transmitter

The RKI S2 Sensors and Transmitters use state of the art sensor technology to detect common gas hazards. Their efficient design and cost effectiveness make them an industry choice for atmospheric monitoring. The sensor transmitters can be used in both indoor and outdoor conditions and are designed to interface with RKI controllers or PLC/DCS systems.

The sensors are available in explosion proof casing for monitoring LEL, H2 specific, oxygen, H2S, CO2, and carbon monoxide. These sensors also have flame arrestors and are approved for use in hazardous environments. The oxygen, H2S, CO, and CO2 sensors are available in non-explosion proof models. The sensors provide highly specific and quick detection and are long lasting. The sensors can be quickly replaced while on the field and do not require any tools.

Explosion proof S2 Sensor/Transmitter

The explosion proof sensors use a variety of detection mechanisms including catalytic for LEL and LEL- H2 specific; metal oxide semiconductor for hydrogen; galvanic cell technology for oxygen; electrochemical for hydrogen sulfide and carbon monoxide; and infrared for carbon dioxide, methane, and hydrocarbons. A hydrogen specific sensor transmitter is not available. Each of these detection methods come with their own measuring range specifications and response times varying from 20 seconds to 45 seconds. These sensors are stainless steel and are housed in a cast aluminum explosion proof J-Box (a stainless steel J-Box is also available).

Non-explosion proof S2 Sensor/Transmitter

The non-explosion proof sensors use galvanic cells for oxygen detection; electrochemical technology for hydrogen sulfide, carbon monoxide, and other toxics; and infrared technology for carbon dioxide detection. The response times vary between 20 seconds and 60 seconds depending on the targeted gas, and the measuring ranges vary as well. These sensors are plastic or aluminum and housed in an explosion proof J-Box.

Accessories

The S2 Sensor/Transmitter has numerous accessories available to meet the individual workplace's needs. Such accessories include calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and data loggers.

Each sensor comes standard with a one year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

M031-3211-200 MicroRAE Wireless Four-Gas Monitor, CSA/BLE/900M/GPS/LELf/O2/CO/H2S by RAE Systems

The MicroRAE four-gas portable detector brings enhanced user-friendliness and flexibility to wireless gas detection. This enables continuous, instant visibility of safety threats for faster, more informed decisions, to protect workers, facilities, and the environment, and to optimize operations.

The MicroRAE is a wireless diffusion detector that simultaneously monitors up to four gases, including hydrogen sulfide, carbon monoxide, oxygen and combustibles (LEL). With its different wireless connectivity options the MicroRAE can deliver real-time instrument readings and alarm status to other wireless offerings such as ConneXt Plus, ConneXt Pro, ConneXt Loneworker4 and Safety Communicator.

• Man Down Alarm with real-time remote wireless notification1
• GPS module for location
• Bluetooth® low energy connection to a Smart Phone device for uplink data communication and device configuration
• Remote notification and Panic function
• Fully automated bump testing and calibration with AutoRAE 2

Industries

Personal protection and general safety and compliance in:

• Lone Worker Applications
• Oil and Gas
• Waste water treatment
• Utilities
• Telecommunications
• Firefighting
• Petrochemicals
• Construction

Optional Accessories

• AutoRAE 2 Automatic Test and Calibration Systems
• Gang Charger (5 units)
• Auxiliary filter
• Hand pump kit
• Truck mount charger

Features & Benefits

• Honeywell ConneXt compatible with Mesh and Wifi wireless configurations
• Compact and lightweight
• IP-67 water and dust-resistant case
• Strong, protective, concussion-proof design
• Real-time gas concentration readings, location, alarm and status enabled by state of-the-art wireless technology
• Unmistakable five-way local and remote notification of alarm conditions
• Short bump test and calibration time
• Global approval for worldwide acceptance
• Filtered LEL sensor options to inhibit sensor poisoning
• Compatible with Safety Communicator
• Device Management with Honeywell SafetySuite

MicroRAE Wireless Four-Gas Monitor by RAE Systems

The MicroRAE four-gas portable detector brings enhanced user-friendliness and flexibility to wireless gas detection. This enables continuous, instant visibility of safety threats for faster, more informed decisions, to protect workers, facilities, and the environment, and to optimize operations.

The MicroRAE is a wireless diffusion detector that simultaneously monitors up to four gases, including hydrogen sulfide, carbon monoxide, oxygen and combustibles (LEL). With its different wireless connectivity options the MicroRAE can deliver real-time instrument readings and alarm status to other wireless offerings such as ConneXt Plus, ConneXt Pro, ConneXt Loneworker4 and Safety Communicator.

• Man Down Alarm with real-time remote wireless notification1
• GPS module for location
• Bluetooth® low energy connection to a Smart Phone device for uplink data communication and device configuration
• Remote notification and Panic function
• Fully automated bump testing and calibration with AutoRAE 2

Industries

Personal protection and general safety and compliance in:

• Lone Worker Applications
• Oil and Gas
• Waste water treatment
• Utilities
• Telecommunications
• Firefighting
• Petrochemicals
• Construction

Optional Accessories

• AutoRAE 2 Automatic Test and Calibration Systems
• Gang Charger (5 units)
• Auxiliary filter
• Hand pump kit
• Truck mount charger

Features & Benefits

• Honeywell ConneXt compatible with Mesh and Wifi wireless configurations
• Compact and lightweight
• IP-67 water and dust-resistant case
• Strong, protective, concussion-proof design
• Real-time gas concentration readings, location, alarm and status enabled by state of-the-art wireless technology
• Unmistakable five-way local and remote notification of alarm conditions
• Short bump test and calibration time
• Global approval for worldwide acceptance
• Filtered LEL sensor options to inhibit sensor poisoning
• Compatible with Safety Communicator
• Device Management with Honeywell SafetySuite

GS-BG-A Gasman Intrinsically Safe Personal Single Gas Monitor, Rechargeable Battery, 0-500ppm Hydrogen Sulfide by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

72-0010-50 OX-03 Single Gas Personal Monitor Kit with Alkaline Batteries, Screwdriver, and Small Padded Case by RKI Instruments

Individuals need personal protection in hazardous areas at all times without adding extra bulky equipment, and the 03 Series can provide that kind of protection at an affordable price. The GP-03, OX-03, CO-03, and HS-03 models are personal single gas monitors designed for protection from exposure to combustible hydrocarbons, oxygen deficiency, hydrogen sulfide, or carbon monoxide.

The O2, CO, and H2S versions can be operated continuously for at least 3,000 hours on (2) AAA size alkaline batteries. The GP-03 operates for 35 hours on alkaline and 30 hours on rechargeable Ni-MH. The 03 models have 2 preset alarms that are user adjustable. Each version is also equipped with visual, audible, and vibration alarms as standard.

The replacement sensors are inexpensive, easily field replaceable, and are interchangeable with other popular RKI instruments like the GX-2009, GX-2012, and GasWatch 2. Sensors for LEL and O2 have a life expectancy of over 2 years. Sensors for H2S and CO have a life expectancy of over 3 years.

Each 03 Series monitor is impact, dust, and water resistant with an IP-67 rating. 03 Series instruments are safe for use in hazardous locations, classified as intrinsically safe ATEX/IECEx and by CSA to U.S. and Canadian standards (pending) for Class I, Division 1, Groups A, B, C, and D atmospheres.

Features:

• Operates 3,000 hours on alkaline (GP-03 operates 35 or 30 hrs on alkaline/Ni-MH)
• Pocket size 2.1"(W) x 2.6"(H) x 0.9"(D)
• Light weight 2.8 ounces
• Impact, dust, and water resistant (IP-67)
• Replaceable rubber boot
• Data log 5 to 300 hours with adjustable intervals
• Audible / visual / vibration alarms
• Automatic backlight
• Peak Hold, STEL & TWA
• Low battery alarm
• Intrinsically safe, ATEX (CSA pending)
• 3 Year warranty H2S & CO
• 2 Year warranty LEL & O2

Applications:

• Hazardous material
• Mining
• Refineries / petrochemical
• Water / wastewater treatment
• Pharmaceuticals
• Utilities
• Chemical plants
• Fire services

*Please note we can only ship RKI products to customers within the United States

M001-0095-000 UNI MP100 Single Gas Detector, O2 Lead-free, Measuring Range: 30% ppm, Resolution: 0.1% ppm by mPower Electronics

The UNI MP100 offers a simple, personal protection for a wide array of toxic gas and oxygen (O2) measurement applications. In addition to common sensors such as carbon monoxide (CO), hydrogen sulfide (H₂S), nitrogen dioxide (NO₂), ammonia (NH₃) and sulfur dioxide (SO₂), we offer less-common sensors including chlorine (Cl₂), chlorine dioxide (ClO₂), phosgene (COCl₂), hydrogen chloride (HCl), arsine (AsH₃), phosphine (PH₃), ozone (O₃), methyl mercaptan and ethylene oxide. Special oxygen monitors are available with long-life lead-free sensors or with inverted alarms for inert gas applications. The monitors have a large LCD providing maximum readability in the field and are made with six bright red LEDs allowing for quick alarm notification. Constructed of strong and durable material, the UNI is designed to be comfortable, yet drop-resistant. The UNI series can easily be bump tested and calibrated with the mPower CaliCase System.

Features, Functions and Benefits

• 50% larger (AA versus 2/3 AA) Lithium Battery
• Widest choice of sensors on the market
• Large display
• 50 Event datalogging
• Low cost of ownership
• Smart sensors
• Solid stainless-steel alligator clip
• Durable housing
• Fast calibration & download using docking station
• UL Classification Class I, II, III, Groups ABCDEFG

72-5103RK-01 Eagle Portable Monitor for Hydrogen Sulfide (H2S), 0 - 1.00 PPM by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

73-0051RK-NS SC-01 Single Toxic Gas Monitor, without Sensor, with Belt Clip by RKI Instruments

Paving the way for gas detection and monitoring solutions, RKI Instruments produces the most advanced sensors and monitors. Their teams of experts are constantly seeking new and innovative methods for meeting the unique needs of jobsites with potentially hazardous conditions. Integrating the latest smart sensor technology with functional design, RKI Instruments is proud to present the SC-01 Model for single toxic gas monitoring.

SC-01 Model Single Toxic Gas Monitor

The SC-01 Single Toxic Gas Monitor is the latest in smart sensor technology with practical applications in refineries, chemical plants, hazmat response, semiconductor plants, and more. It is a versatile single gas detector with interchangeable sensors. The unit automatically recognizes when a sensor has been changed and automatically calibrates to the recognized sensor. The internal technology stores each sensor's configuration and activates the data once the new sensor is recognized.

What sets the SC-01 apart from its competitors is its wide range of available ESM-01 sensors including unique sensors for arsine, ammonia, carbon monoxide, chlorine, hydrogen cyanide, hydrogen sulfide, phosphine, and sulfur dioxide. These plug in style sensors are easy to change and can be replaced quickly while onsite. Onsite workers can also utilize the optional 10 foot extender cable for remote monitoring and quick response.

Exclusive Features

The SC-01's large backlit LCD display is great for onsite use and is easy to read. The screen displays the gas reading, battery level, and current time. When the alarm is activated, the LCD screen's backlight automatically activates. The alarm features a quadruple notification system that includes a buzzing audible alarm, a blinking LED display, a vibration alert, and display indicator. The unit performs regular safety self-evaluations for sensor connections, battery life, and circuit issues. Amazingly, the unit can function with more than 250 hours of continuous operation with 2 AA alkaline batteries. The SC-01 comes standard with data logging capabilities ensuring that workplace safety managers are able to monitor, record, and evaluate possible hazard trends.

SC-01 Model Specifications

The unit is highly portable with its lightweight (less than 8 ounces) and pocket size dimensions (2.6 x 6.2 x 1.2 ). Users can easily control the unit's functioning with its 3 large front facing push buttons. The casing is designed to protect the monitor with its high impact plastic with rubber boot that is dust proof and splash proof. The typical response time for gas detection is approximately 60 seconds and uses electrochemical detection. For gas monitoring needs, the SC-01 Model is rated intrinsically safe.

The SC-01 Single Toxic Gas Monitor comes standard with several accessories for easy use including an alligator clip, AA alkaline batteries, impact resistant rubber boot, and a user manual. Users can also purchase optional accessories to further customize the unit to meet specific workplace needs. These optional accessories include a belt clip, a 10 foot extender cable, and datalogging software that is PC compatible.

*Please note we can only ship RKI products to customers within the United States

MicroMax Pro Serviceable Multigas Portable

The MicroMAX Pro is the best microprocessor controlled multi-gas monitor on the market today. It s the only monitor that has it all easy to use, reliable, highest quality, economical, lightweight, shortest response time, built-in data logging, lifetime warranty* and now includes our newest innovation...

Since worker safety is our business, Lumidor continually strives to improve its gas detector product line, and has done so with the addition of the voice message feature. Four languages (English, French, German and Spanish) are included with each monitor - just select the desired language. Every function, when activated, is accompanied with a voice message. Everything from immediate warnings to simple on and off functions are communicated verbally to the user. This feature is also very valuable in poorly lit situations. And, the language displayed on the new 4-line display is the same as the one selected for the voice.

The MicroMAX Pro is designed to provide the ultimate in personal safety. It s OSHA compliant, and has a rugged case that provides superior RFI/EMI shielding, as well as dust, water and impact resistance. Additionally, it is designed, tested and manufactured under strict ISO 9001 standards, and is UL classified for use in Class I, II, III Division I, Groups A, B, C, D, E, F, G.

The MicroMAX Pro combines diffusion and built-in internal sampling pump systems for simultaneously monitoring 1 - 5 gases. The popular internal pump allows for easy pre-testing in confined spaces and provides almost instantaneous readings of gas concentrations. In order to save power, the pump can be switched off and the diffusion mode will take over.

The MicroMAX Pro has preset and field selectable alarms. Both audible and visual alarms warn the user if the oxygen levels are either too low or enriched, combustible gas is present or toxic gas levels are too high. The toxic gas alarms can be easily adjusted in the field from immediate to TWA. And, alarms are also activated in case of sensor failure, low battery voltage, pump blockage or low air flow.

Our unique microprocessor design allows for self diagnostics with each start up. The MicroMAX Pro internally data logs individual channel alarms, TWA averaging and peak information. With a push of the Mode button you can review information, as well as customize user settings or initiate calibration.

All stored information is available for display, and meets OSHA documentation for employee awareness programs by simply downloading to a standard Windows™-compatible PC with Lumidor s MPRO-DATALOG software.

Calibration is easier than ever before-it s all automatic-no tools, screws or stopwatch required. Simply place in calibration Mode , introduce calibration gas and wait for voice/display indicating calibration is complete!-A NiMH rechargeable battery pack and 4-hour charger are now included with each monitor.

Included Accessories

• Rubber boot with shoulder strap
• Rechargeable NiMH battery pack with 4-hour charger
• Dust filter
• Alkaline battery holder 10 sampling hose with water trap and particulate filter
• MPRO-DATALOG Windows™ 95/98 compatible data logging software and interface cable

Optional Accessories

• External vibrator alarm
• External earphone alarm
• Leather carrying case
• DC-to-DC vehicle charging adapter
• Aluminum or fiberglass search probes
• High-impact carrying case
• Calibration gases Bump test gases
• Confined space kits

Version 5.0 upgrade

• Up to 24 calibration records stored in unit for later download
• Calibration history reports generated
• Compatibility with most Windows™ platforms
• Easier, more functional, user interface with enhanced menus, toolbar, screen displays and calibration dialog

65-2340RKSS-SO2 S2 Series Detector/Amp/XP Stainless Steel J-Box, Non XP, ESM-01 Type, SO2, 0 - 6 ppm by RKI Instruments

Having a reliable gas sensor is detrimental to the safety and security of workers in potentially unstable work environments. In many cases, the decision to use a gas detection device with a reliable sensor can be the difference between life and death. RKI Instruments understands the reliability of gas sensors should be a top priority for workplace safety managers. Their team of experts works diligently to incorporate the most advanced technologies with the highest industry standards.

For nearly 20 years, RKI Instruments has worked in the gas detection industry. Its line of products leads the industry in innovation and technology. Every year, the company commits to achieving a higher level of productivity and delivering the best gas detection products on the market. With the introduction of their high performing, low cost S2 Sensor Transmitter, RKI is fulfilling that commitment.

S2 Sensor/Transmitter

The RKI S2 Sensors and Transmitters use state of the art sensor technology to detect common gas hazards. Their efficient design and cost effectiveness make them an industry choice for atmospheric monitoring. The sensor transmitters can be used in both indoor and outdoor conditions and are designed to interface with RKI controllers or PLC/DCS systems.

The sensors are available in explosion proof casing for monitoring LEL, H2 specific, oxygen, H2S, CO2, and carbon monoxide. These sensors also have flame arrestors and are approved for use in hazardous environments. The oxygen, H2S, CO, and CO2 sensors are available in non-explosion proof models. The sensors provide highly specific and quick detection and are long lasting. The sensors can be quickly replaced while on the field and do not require any tools.

Explosion proof S2 Sensor/Transmitter

The explosion proof sensors use a variety of detection mechanisms including catalytic for LEL and LEL- H2 specific; metal oxide semiconductor for hydrogen; galvanic cell technology for oxygen; electrochemical for hydrogen sulfide and carbon monoxide; and infrared for carbon dioxide, methane, and hydrocarbons. A hydrogen specific sensor transmitter is not available. Each of these detection methods come with their own measuring range specifications and response times varying from 20 seconds to 45 seconds. These sensors are stainless steel and are housed in a cast aluminum explosion proof J-Box (a stainless steel J-Box is also available).

Non-explosion proof S2 Sensor/Transmitter

The non-explosion proof sensors use galvanic cells for oxygen detection; electrochemical technology for hydrogen sulfide, carbon monoxide, and other toxics; and infrared technology for carbon dioxide detection. The response times vary between 20 seconds and 60 seconds depending on the targeted gas, and the measuring ranges vary as well. These sensors are plastic or aluminum and housed in an explosion proof J-Box.

Accessories

The S2 Sensor/Transmitter has numerous accessories available to meet the individual workplace's needs. Such accessories include calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and data loggers.

Each sensor comes standard with a one year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

65-2625RK-HR Rig Monitor System, with M2, Hydrogen Sulfide (H2S) 0 - 100 ppm Sensor with Cal Cup/Splash Guard and 25 Cable, Horn/Strobe, and 50 Power Cable with Battery Clamps by RKI Instruments

RKI Instruments is proud to announce our new RM series continuous gas monitors. These monitors are specifically designed for detection of H2S around temporary drilling rigs. All units include our long-life plug in electrochemical H2S sensor, range 0-100 ppm. All cable connections are protected by rugged strain relief cord grips, and sensors are mounted in an explosion proof enclosure that includes a convenient mounting bracket.

Model M2RM: Based on our M2 platform, this version includes the standard M2 transmitter, outfitted with the sensor and splash/mud guard on a 25 ft. cable. Included is a 50 ft. power cable with battery clamps for connection to a user-provided 12 VDC battery. Also included is a powerful horn / strobe mounted directly to the M2 enclosure. All standard features of the M2 apply, including 4-20 ma and Modbus RS-485 output, large easy to read LCD display with backlight, and non-intrusive calibration.

Features:

• H2S detection, 0-100 ppm range
• Explosion proof enclosure
• Convenient mounting bracket
• Easily installed and moveable
• Battery clamps for easy connection
• Powerful horn and strobe

Applications:

• Workover rigs
• Drilling rigs
• Fractionators
• Water reclamation
• Pumpers
• Water haulers
• Exploration

*Please note we can only ship RKI products to customers within the United States

10071364 Altair Single-Gas Detector Alternate Set Point Models - Oxygen (O2) by MSA

The MSA Altair Maintenance-Free Single-Gas Detector comes is available in variety of gas detection models including oxygen, carbon monoxide, and hydrogen sulfide. The unit is designed to notify users of gas monitoring with visual alarms of ultra-bright LED lights (which remain visibly noticeable when stored in pockets) and a screen display, distinct audible alarms of over 95 decibels, and vibrating alarms. The triple alarm system will ensure that users and those nearby are appropriately alerted to gas situations in the environment. Most notably, the alarm system is designed to alert users regardless of hearing or visual impairment.

Altair Maintenance-Free Single-Gas Detector features

Worksites interested in assessing alarm conditions and history will find the automatic internal record keeping of the device to be useful. Using MSA InfraRed communication technology, the Altair Maintenance-Free Single-Gas Detector automatically stores the last 25 alarm events. The InfraRed communication adapter allows users to adjust settings and assess alarm conditions.

Easy to use

The unit s ease of use is integral when working in potentially dangerous conditions. These low maintenance unit s are key features of the products advanced design. Long-life lithium batteries typically perform for two years or more, and are designed to outlast a two-minute alarm mode per day. This type of battery efficiency places the Altair Maintenance-Free Single-Gas Detector well above its closest competitors in longevity.

The unit allows for easy bump checks by pressing Gas Test. Once tested, the unit displays a checkmark on the screen for 24 hours. The detectors also offer built-in calibrations, as required for some worksites. For other gas response tests and bump checks, the Altair Maintenance-Free Single-Gas Detector is compatible with Altair Quick-Check Stations. These stations are another maintenance free way to ensure the quality and reliability of the industry s leading gas detection devices.

Durability

Exceeding industry standards is the norm for MSA, and those in dangerous work settings can rest assured that The Safety Company has provided the very best in gas detection technology.

Ultima X 5000 Hydrogen Sulfide by MSA

The ULTIMA® X5000 Gas Monitor is the future of gas detection for oxygen, toxic and combustible gases. MSA XCell® gas sensors with TruCal® technology offer calibration cycles up to 24 months (local calibration respected). The gas transmitter's advanced, multi-lingual OLED display is easy to read and the unique touch-screen interface makes it simple to navigate.

FEATURES:

• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway
• Three-year warranty on XCell sensors
• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• An industry first, Diffusion Supervision warns if sensor inlet becomes blocked and unable to detect gas
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway

10071340 Altair Single-Gas Detector Alternate Set Point Models - Hydrogen Sulfide (H2S) by MSA

The MSA Altair Maintenance-Free Single-Gas Detector comes is available in variety of gas detection models including oxygen, carbon monoxide, and hydrogen sulfide. The unit is designed to notify users of gas monitoring with visual alarms of ultra-bright LED lights (which remain visibly noticeable when stored in pockets) and a screen display, distinct audible alarms of over 95 decibels, and vibrating alarms. The triple alarm system will ensure that users and those nearby are appropriately alerted to gas situations in the environment. Most notably, the alarm system is designed to alert users regardless of hearing or visual impairment.

Altair Maintenance-Free Single-Gas Detector features

Worksites interested in assessing alarm conditions and history will find the automatic internal record keeping of the device to be useful. Using MSA InfraRed communication technology, the Altair Maintenance-Free Single-Gas Detector automatically stores the last 25 alarm events. The InfraRed communication adapter allows users to adjust settings and assess alarm conditions.

Easy to use

The unit s ease of use is integral when working in potentially dangerous conditions. These low maintenance unit s are key features of the products advanced design. Long-life lithium batteries typically perform for two years or more, and are designed to outlast a two-minute alarm mode per day. This type of battery efficiency places the Altair Maintenance-Free Single-Gas Detector well above its closest competitors in longevity.

The unit allows for easy bump checks by pressing Gas Test. Once tested, the unit displays a checkmark on the screen for 24 hours. The detectors also offer built-in calibrations, as required for some worksites. For other gas response tests and bump checks, the Altair Maintenance-Free Single-Gas Detector is compatible with Altair Quick-Check Stations. These stations are another maintenance free way to ensure the quality and reliability of the industry s leading gas detection devices.

Durability

Exceeding industry standards is the norm for MSA, and those in dangerous work settings can rest assured that The Safety Company has provided the very best in gas detection technology.

10092521 Altair Single-Gas Detector - Hydrogen Sulfide (H2S) by MSA

The MSA Altair Maintenance-Free Single-Gas Detector comes is available in variety of gas detection models including oxygen, carbon monoxide, and hydrogen sulfide. The unit is designed to notify users of gas monitoring with visual alarms of ultra-bright LED lights (which remain visibly noticeable when stored in pockets) and a screen display, distinct audible alarms of over 95 decibels, and vibrating alarms. The triple alarm system will ensure that users and those nearby are appropriately alerted to gas situations in the environment. Most notably, the alarm system is designed to alert users regardless of hearing or visual impairment.

Altair Maintenance-Free Single-Gas Detector features

Worksites interested in assessing alarm conditions and history will find the automatic internal record keeping of the device to be useful. Using MSA InfraRed communication technology, the Altair Maintenance-Free Single-Gas Detector automatically stores the last 25 alarm events. The InfraRed communication adapter allows users to adjust settings and assess alarm conditions.

Easy to use

The unit s ease of use is integral when working in potentially dangerous conditions. These low maintenance unit s are key features of the products advanced design. Long-life lithium batteries typically perform for two years or more, and are designed to outlast a two-minute alarm mode per day. This type of battery efficiency places the Altair Maintenance-Free Single-Gas Detector well above its closest competitors in longevity.

The unit allows for easy bump checks by pressing Gas Test. Once tested, the unit displays a checkmark on the screen for 24 hours. The detectors also offer built-in calibrations, as required for some worksites. For other gas response tests and bump checks, the Altair Maintenance-Free Single-Gas Detector is compatible with Altair Quick-Check Stations. These stations are another maintenance free way to ensure the quality and reliability of the industry s leading gas detection devices.

Durability

Exceeding industry standards is the norm for MSA, and those in dangerous work settings can rest assured that The Safety Company has provided the very best in gas detection technology.

64025 PS200 2-Gas Personal Safety Monitor - O2/CO, Non-Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

2901-37-002 IR 29 Di Gas Transmitter with Display, IP67, Propane (C3H8), 0 - 100 LEL by GfG

Measuring Principle

IR transmitters have become recognized as reliable gas warning systems for explosion protection. They are used to detect individual combustible gases or a wide range of gases. This involves sending an IR beam with a certain light intensity through a measuring space and then capturing it with a detector. Parts of this beam are absorbed by, amongst other things, hydrocarbon molecules. The reduced light intensity of the beam is registered by beam detectors and converted into a signal as the existing % LEL gas concentration.

Benefits

A special feature of our IR technology is its ability to also measure combustible gases above the lower explosion limit. Moreover, the measurement does not require oxygen.

With this technology there is basically no risk of contaminating the sensor, through silicone vapors or hydrogen sulfide, when using catalytic combustion sensors.

Operation

IR transmitters are usually used with 2 wavelengths, a so-called reference wavelength and just one measuring wavelength. Strict limits are applied to these systems. The absorption spectra of many hydrocarbons are located in the wavelength range of 3.3 μm and overlap to a large extent.

This means that gases with overlapping spectra and just one measuring wavelength can no longer be clearly distinguished. Some hydrocarbons, e.g. the frequently used welding gas acetylene, are non-absorbing in the wavelength range of 3.3 µm, but absorb instead in neighboring wavelength ranges.

In many practical applications, it is not essentially important which gas is responsible for the explosion risk. Therefore, early warnings through the broadband measurement of hydrocarbons in order to monitor the lower explosion limit (LEL) must be guaranteed. False alarms with uncritical concentrations of individual gases or solvents are thus absolutely unacceptable.

These requirements are problems for systems with 2 wavelengths.

Patented GfG Technology

The internationally patented technology of the IR 29 has been developed to solve these problems. The gold-plated mirror optics of the sensor contains 2 radiators and up to 4 detector elements with different optical filters. The precisely calculated, microstructured and pure gold coated mirror optics of the IR 29 are supplied for the first time without beam splitters.

This helps to cut signal losses by 50 % and to completely avoid the physically-related disadvantages of a beam splitter. The measured values from two additional wavelengths (4 wavelengths in total) ensure improved detection of individual gases and thus enhanced selectivity. This results in the prevention of false alarms. Only a 4 wavelength system always guarantees early warnings and the simultaneous prevention of false alarms.

New Technology

The IR 29 is the first and only intrinsically safe IR gas transmitter with patented 4-beam 4-wavelength technology.

The ignition protection class "intrinsically safe", which is so essential for industrial plants and the mining industry, is achieved by the additional use of the SB1 safety barrier and its internationally patented and innovative design.

Complete Safety Even In Zone 0

The IR 29 is the first IR gas transmitter that can also be used in Ex zone 0 and which enables maintenance as well as replacement of the sensor head without additional expense when energized.

Universal Application

The IR 29 with its robust V4A stainless steel housing has been designed to withstand the harshest environmental conditions.

The application areas of the dust and water-protected structure range from production and storage areas to disposal sites, biogas plants, mines and oil rigs.

Internal Data Logger

A standard built-in data logger records all the measuring data, minimum / maximum values, average values and alarm events of the last 24 hours in a ring buffer.

The recording can also be shown on the display as a 2 and 8 hour trend indicator.

The histogram mode can be selected as a permanent display of the measured values. These values are continuously updated.

Graphical Display

Measured values are shown on the high-contrast graphical display. The display can be rotated 180° depending on the installation of the IR 29.

Self Diagnosis

Processor-based signal processing enables the systematic compensation of temperature dependencies, aging influences and soiling effects. Safety-relevant functions are monitored permanently via self-diagnosis procedures and a possibly required service is indicated automatically. Daily interfering factors, such as dust and dirt accumulation, are almost completely eliminated by the innovative design.

Pressure Sensor, Moisture and Temperature Compensation

The measuring accuracy of IR sensors depends on partial pressure and thus also air pressure. Climatic fluctuations or barometric high pressure therefore influence the measuring result. Furthermore, the absorption spectrum of water almost completely covers that of hydrocarbon absorption in the 2.7 to 3.3 μm range. Air humidity therefore initially generates a measuring signal the same as the actual measuring gas. This cross-sensitivity is of particular importance in warm areas with high relative humidity. An increase in the absolute water absorption capacity of air is not linear with the temperature, i.e. three times as much water can be absorbed at 40 °C than at 20 °C. This influence can only be compensated if the current moisture content of the air is known. The IR 29 can be optionally equipped with a pressure and moisture sensor for compensation.

Maximum Safety

The innovative display enables the realization of completely safe warning concepts.

Local displays and signals directly at the device can be used to provide an early warning of potential risks.

The display at the upstream safety barrier SB1 D enables the detection of risks outside the danger zone being monitored.

This allows immediate on-site action before really hazardous situations occur.

Dust Protection

A gas permeable, water-repellent diaphragm protects the absorption space of the transmitter against dust. The additional impact protection made from robust V4A stainless steel prevents mechanical damage to the optical components.

The diaphragm can be cleaned or replaced in a matter of minutes.

Remote Controls

The IR 29 transmitter does not feature control elements for setting or servicing tasks. This helps to prevent accidental or unauthorized manipulation.

Service work at the IR 29 transmitter is carried out using the RC 2 remote control.

Features

• First intrinsically safe infrared transmitter for explosion protection
• ATEX II 1G Ex ia IIC T4 Ga C0158 can also be used in Ex zone 0
• Temperature, moisture and pressure compensation
• Patented infrared technology (NDIR)
• The energized IR sensor head can be replaced in Ex areas
• Maintenance and service-friendly

10076727 Altair Pro Single Gas-Detector Alternate Set Point Models - Hydrogen Sulfide (H2S) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications