Surecell

BW Clip 3 Year Single Gas Detector by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Lumidor MiniMAX XT Personal Detector

MiniMAX XT is technically crafted to be, quite simply, the easiest and most cost effective to use single gas on the market. Utilizing patented sensing technologies, the MiniMAX XT provides 24/7 user confidence. That means solid, reliable, continuous protection always.

Lumidor identified that the market demanded more than tiny good looks in a single gas detector. Our customers said that in addition to a small and rugged design, single gas monitors must offer comprehensive sensor options, simple operation and most importantly, reliable and accurate readings without false alarms triggered by common radio interference.

Simple one button operation reduces time consuming and costly training issues. Our unique Temperature Compensation and Cell Output Decay Compensation features ensure improved accuracy across wide temperature ranges, providing our 2 year, no calibration needed facility.

Cost Effective

• No calibration required
• Unit may be calibrated if site procedures necessitate
• Remaining lifetime display enables planned replacement
• 24 month continuous operation
• Low cost investment

Easy to use

• Out-of-the-box solution
• Provided with an interactive Product Guide
• One button operation

Excellent EMC / RFI performance

• No false alarms due to common radio interference or cell phones
• Complies with toughest industrial standards for RFI immunity and EMC compatibility

Reliable operation

• Uses patented SureCell (CO and H2S only) and Reflex* technology
• Stable and accurate gas readings
• Intrinsically safe

Compact Design

• Small ergonomic design
• Lightweight
• Comfortable to wear

Durable housing

• Rugged and impact resistant
• Weather resistant

Versatile clip design

• Clips anywhere
• Optional crocodile clip design

Large Display

• Battery life status
• Actual gas reading during alarm
• Peak reading and when it occured
• Remaining lifetime
• Alarm status
• Test status

Demanding Alarms

• Distinctive two-tone alarm
• Rapid flashing alarm alerts user of danger
• Vibrating alarm
• Low battery alarm - indicates unit nearing end of life

Lumidor MiniMAX XT Personal Detector

MiniMAX XT is technically crafted to be, quite simply, the easiest and most cost effective to use single gas on the market. Utilizing patented sensing technologies, the MiniMAX XT provides 24/7 user confidence. That means solid, reliable, continuous protection always.

Lumidor identified that the market demanded more than tiny good looks in a single gas detector. Our customers said that in addition to a small and rugged design, single gas monitors must offer comprehensive sensor options, simple operation and most importantly, reliable and accurate readings without false alarms triggered by common radio interference.

Simple one button operation reduces time consuming and costly training issues. Our unique Temperature Compensation and Cell Output Decay Compensation features ensure improved accuracy across wide temperature ranges, providing our 2 year, no calibration needed facility.

Cost Effective

• No calibration required
• Unit may be calibrated if site procedures necessitate
• Remaining lifetime display enables planned replacement
• 24 month continuous operation
• Low cost investment

Easy to use

• Out-of-the-box solution
• Provided with an interactive Product Guide
• One button operation

Excellent EMC / RFI performance

• No false alarms due to common radio interference or cell phones
• Complies with toughest industrial standards for RFI immunity and EMC compatibility

Reliable operation

• Uses patented SureCell (CO and H2S only) and Reflex* technology
• Stable and accurate gas readings
• Intrinsically safe

Compact Design

• Small ergonomic design
• Lightweight
• Comfortable to wear

Durable housing

• Rugged and impact resistant
• Weather resistant

Versatile clip design

• Clips anywhere
• Optional crocodile clip design

Large Display

• Battery life status
• Actual gas reading during alarm
• Peak reading and when it occured
• Remaining lifetime
• Alarm status
• Test status

Demanding Alarms

• Distinctive two-tone alarm
• Rapid flashing alarm alerts user of danger
• Vibrating alarm
• Low battery alarm - indicates unit nearing end of life

BWC3-M BW Clip 3 Year Single Gas Detector, Carbon Monoxide (CO), Low - 35 ppm / High - 200 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3M

BW Clip 3 Year Single Gas Detector, Carbon Monoxide (CO), Low - 35 ppm / High - 200 ppm, Black Housing by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3-M-B

Lumidor MiniMAX XT Personal Detector

MiniMAX XT is technically crafted to be, quite simply, the easiest and most cost effective to use single gas on the market. Utilizing patented sensing technologies, the MiniMAX XT provides 24/7 user confidence. That means solid, reliable, continuous protection always.

Lumidor identified that the market demanded more than tiny good looks in a single gas detector. Our customers said that in addition to a small and rugged design, single gas monitors must offer comprehensive sensor options, simple operation and most importantly, reliable and accurate readings without false alarms triggered by common radio interference.

Simple one button operation reduces time consuming and costly training issues. Our unique Temperature Compensation and Cell Output Decay Compensation features ensure improved accuracy across wide temperature ranges, providing our 2 year, no calibration needed facility.

Cost Effective

• No calibration required
• Unit may be calibrated if site procedures necessitate
• Remaining lifetime display enables planned replacement
• 24 month continuous operation
• Low cost investment

Easy to use

• Out-of-the-box solution
• Provided with an interactive Product Guide
• One button operation

Excellent EMC / RFI performance

• No false alarms due to common radio interference or cell phones
• Complies with toughest industrial standards for RFI immunity and EMC compatibility

Reliable operation

• Uses patented SureCell (CO and H2S only) and Reflex* technology
• Stable and accurate gas readings
• Intrinsically safe

Compact Design

• Small ergonomic design
• Lightweight
• Comfortable to wear

Durable housing

• Rugged and impact resistant
• Weather resistant

Versatile clip design

• Clips anywhere
• Optional crocodile clip design

Large Display

• Battery life status
• Actual gas reading during alarm
• Peak reading and when it occured
• Remaining lifetime
• Alarm status
• Test status

Demanding Alarms

• Distinctive two-tone alarm
• Rapid flashing alarm alerts user of danger
• Vibrating alarm
• Low battery alarm - indicates unit nearing end of life

XNX-AMSV-RHIF1 XNX Universal Transmitter, ATEX M25 SS RLY HRT MPD IR LEL by Honeywell Analytics

XNX Universal Transmitter, ATEX M25 AL FF HRT FOR TOX/O2 SNSRThe XNX Universal Transmitter, now with HART EDDL, marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs.

XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) software provides users with an at-a-glance indication of the health of their gas detectors in the field.

Bringing together the best solutions in gas detection

Electrochemical

• Proven electrochemical sensing technology
• Surecell™ electrochemical cells are ideal for hot and humid environments
• Long life sensing cells (typical >2 years)
• Patented 'Reflex' sensing element verification diagnostics
• Sensor recognition software auto configures transmitter
• Plug and play factory configured sensors
• Intrinsically safe sensor connection permits hot swap, reducing down time

Catalytic Bead

• Supports Honeywell Analytics 705, 705HT, Sensepoint, Sensepoint HT and MPD sensors
• Fast response to wide range of hydrocarbons and flammables

Infrared (Open Path IR, Point IR, IR Cell)

• Supports Honeywell Analytics Searchline Excel, Searchpoint Optima Plus
• Failsafe operation
• Fast speed of response
• Reduced routine maintenance
• Immune to catalytic poisons
• Long operating life
• Works in inert atmospheres

High performance

• Flammable gas detection 0 to 100% LFL/LEL
• Point IR with heated optics provides immunity to poisoning and no hidden faults
• Open-path IR flammable gas detection in LEL-m measurement
• Electrochemical cell offers toxic gas detection in ppm
• IR cell provides CO₂ and combustible gas monitoring
• Robust and reliable operation in explosive areas and harsh environments

Flexible Operation

• 3 versions - supports (Catalytic Bead and IR Cell), Electrochemical Cell and IR (point and open-path) gas detection
• Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability
• 4-20mA with HART® as standard
• HART Enhanced Device Description Language (EDDL) software*
• Multiple communications options include up to 3 relays, MODBUS® and FOUNDATION® H1 Fieldbus
• Optional local IS port for handheld HART configurator

Easy to Use

• Large, backlit, easy-to-view LCD display offers multisensory indicators (visual icons, colored buttons, text, etc.) to display gas and sensor readings
• User interface supported by 8 selectable languages (English, Spanish, German, Italian, Portuguese, French, Russian, Chinese)
• Self-test and fault indication features
• Non-intrusive, one-man operation
• Quick calibration with auto-inhibit

Easy to Install

• 3 or 4 wire operation, source, sink or isolated
• Simple plug-in sensors and replaceable cells
• NEMA 4X IP66 rated for rugged indoor/outdoor use
• Five conduit entries for ease of installation

Cost Effective

• Minimal training required
• One-man operation
• Plug-in sensor replacement
• All necessary accessories included

BWC2-S BW Clip 2 Year Single Gas Detector, Sulfur Dioxide (SO2), Low - 5 ppm / High - 10 ppm by BW Technologies

Do you need a portable SO2 gas detector that is user friendly and durable? The maintenance free BWC2-S is designed to give you safe and dependable operation for two full years. It contains all you need for accurate sulfur dioxide detection.

To use your gas detector, just turn it on, and that is it. No calibration or battery charging is needed. In fact, you never change batteries. This gives you dependable gas detection without downtime.

You may use your BWC2-S with Fleet Manager II programs, and MicroDock II or IntelliDoX systems for instrument managing. It has Reflex Technology™ for daily self diagnostics and Surecell™ for fast performance.

Configuring the BWC2-S

• Chirp for non compliance
• Adjustable set points and parameters as long as the unit is in operation
• If you want to use the noncompliance indicator feature, it can be set to flash red each time you need a bump test.
• You can adjust the monitor to give you the gas reading when it sounds an alarm.
• The monitor will also function as a clock when you set the display for the time.

Why Invest in the BWC2-S for Gas Detection?

• Easy recordkeeping
• Test multiple units at once
• No maintenance battery and sensor last as long as the unit
• Can perform in all kinds of harsh conditions (122F to -30F)
• Light and convenient to carry weighs less than 1/4 pound
• Easy operation just one button
• Auto-test features
• Easy to see wide angle flashing alarm
• Autolog last 35 events and bump tests
• Low operation and ownership costs
• Audible, vibrating, and visual alarm

The BWC2-S comes with two reservoir Surecell™ sensor technology that delivers improved response time, performance, and long life. Compared to a standard electromechanical sensor, the Surecell™ outperforms hands down.

Part Number: BWC2S

BW Clip 2 Year Single Gas Detector, Sulfur Dioxide (SO2), Low - 5 ppm / High - 10 ppm, Black Housing by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-S-B

BW Clip 2 Year Single Gas Detector, Sulfur Dioxide (SO2), Low - 2 ppm / High - 5 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-S25

2106B1421 Sensepoint Hazardous Area Approved Gas Detector, SO2 0-50 ppm Toxic Sensor M20 by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

Fit For Purpose

• Flammable, toxic and Oxygen versions available
• High performance, low cost
• Suitable for new and retro fit applications

Proven Sensor Technology

• Surecell™ electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life

ATEX/IECEx Certified

• Complies with the latest standards
• Hazardous area approval and performance
• IP65/67 for use in harsh environments

Easy to Use

• Factory set operation
• Simple to replace
• Minimal training required

Range of Accessories

• Weatherproof cap
• Flow adaptor
• Duct mounting kit
• Collecting cone

XNX-AMSV-NHNNN XNX Universal Transmitter, ATEX M25 SS HRT FOR MV SNSR by Honeywell Analytics

XNX Universal Transmitter, ATEX M25 AL FF HRT FOR TOX/O2 SNSRThe XNX Universal Transmitter, now with HART EDDL, marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs.

XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) software provides users with an at-a-glance indication of the health of their gas detectors in the field.

Bringing together the best solutions in gas detection

Electrochemical

• Proven electrochemical sensing technology
• Surecell™ electrochemical cells are ideal for hot and humid environments
• Long life sensing cells (typical >2 years)
• Patented 'Reflex' sensing element verification diagnostics
• Sensor recognition software auto configures transmitter
• Plug and play factory configured sensors
• Intrinsically safe sensor connection permits hot swap, reducing down time

Catalytic Bead

• Supports Honeywell Analytics 705, 705HT, Sensepoint, Sensepoint HT and MPD sensors
• Fast response to wide range of hydrocarbons and flammables

Infrared (Open Path IR, Point IR, IR Cell)

• Supports Honeywell Analytics Searchline Excel, Searchpoint Optima Plus
• Failsafe operation
• Fast speed of response
• Reduced routine maintenance
• Immune to catalytic poisons
• Long operating life
• Works in inert atmospheres

High performance

• Flammable gas detection 0 to 100% LFL/LEL
• Point IR with heated optics provides immunity to poisoning and no hidden faults
• Open-path IR flammable gas detection in LEL-m measurement
• Electrochemical cell offers toxic gas detection in ppm
• IR cell provides CO₂ and combustible gas monitoring
• Robust and reliable operation in explosive areas and harsh environments

Flexible Operation

• 3 versions - supports (Catalytic Bead and IR Cell), Electrochemical Cell and IR (point and open-path) gas detection
• Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability
• 4-20mA with HART® as standard
• HART Enhanced Device Description Language (EDDL) software*
• Multiple communications options include up to 3 relays, MODBUS® and FOUNDATION® H1 Fieldbus
• Optional local IS port for handheld HART configurator

Easy to Use

• Large, backlit, easy-to-view LCD display offers multisensory indicators (visual icons, colored buttons, text, etc.) to display gas and sensor readings
• User interface supported by 8 selectable languages (English, Spanish, German, Italian, Portuguese, French, Russian, Chinese)
• Self-test and fault indication features
• Non-intrusive, one-man operation
• Quick calibration with auto-inhibit

Easy to Install

• 3 or 4 wire operation, source, sink or isolated
• Simple plug-in sensors and replaceable cells
• NEMA 4X IP66 rated for rugged indoor/outdoor use
• Five conduit entries for ease of installation

Cost Effective

• Minimal training required
• One-man operation
• Plug-in sensor replacement
• All necessary accessories included

SPSTAXH1 Sensepoint Detector with Junction Box, 0-50ppm Hydrogen Sulphide by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

• Flammable, toxic and Oxygen versions available
• Suitable for indoor or outdoor use
• IP65 as standard

Proven Sensor Technology

• Surecell™ electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life

ATEX Certified

• Complies with the latest European standards
• Hazardous area and performance approvals
• Can be used for uncertified applications

Easy to Use

• Factory set operation
• Simple sensor replacement
• Minimal training required

Friendly Installation

• Universal junction box
• One box, three entries
• Metric and NPT compatibility
• Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

• Weather Housing (IP66)
• Flow adaptor
• Collecting cone

2106B1711 Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-15 ppm Toxic Sensor 3/4NPT by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

Fit For Purpose

• Flammable, toxic and Oxygen versions available
• High performance, low cost
• Suitable for new and retro fit applications

Proven Sensor Technology

• Surecell™ electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life

ATEX/IECEx Certified

• Complies with the latest standards
• Hazardous area approval and performance
• IP65/67 for use in harsh environments

Easy to Use

• Factory set operation
• Simple to replace
• Minimal training required

Range of Accessories

• Weatherproof cap
• Flow adaptor
• Duct mounting kit
• Collecting cone

2106B1730 Sensepoint Hazardous Area Approved Gas Detector, O2 25% V/V Toxic Sensor 3/4NPT by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

Fit For Purpose

• Flammable, toxic and Oxygen versions available
• High performance, low cost
• Suitable for new and retro fit applications

Proven Sensor Technology

• Surecell™ electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life

ATEX/IECEx Certified

• Complies with the latest standards
• Hazardous area approval and performance
• IP65/67 for use in harsh environments

Easy to Use

• Factory set operation
• Simple to replace
• Minimal training required

Range of Accessories

• Weatherproof cap
• Flow adaptor
• Duct mounting kit
• Collecting cone

2106B1401 Sensepoint Hazardous Area Approved Gas Detector, H2S 0-50 ppm Toxic Sensor M20 by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

Fit For Purpose

• Flammable, toxic and Oxygen versions available
• High performance, low cost
• Suitable for new and retro fit applications

Proven Sensor Technology

• Surecell™ electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life

ATEX/IECEx Certified

• Complies with the latest standards
• Hazardous area approval and performance
• IP65/67 for use in harsh environments

Easy to Use

• Factory set operation
• Simple to replace
• Minimal training required

Range of Accessories

• Weatherproof cap
• Flow adaptor
• Duct mounting kit
• Collecting cone

BWC2-H510 BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 5 ppm / High - 10 ppm by BW Technologies

If you need hydrogen sulphide gas detection in your line of work, you want the most dependable H2S testing unit you can find, and the 2 year BW Clip BWCH510 is one of the best in the industry. Once you turn it on, there is no need to shut it off. It is designed to run constantly for 2 to 3 years and is virtually maintenance free. You won't have to calibrate, change batteries, charge batteries, or replace the sensor.

Not using the BW Clip? It can easily be stored in its hibernation case, and this will extend its life. For example, a 30 day storage will extend the life by 30 days.

Your BW Clip gas detector is fully compatible with Fleet Manager II software and MicroDock instrument management systems. Plus, if you utilize an IntelliDoX management system you can receive these added benefits:

• Test five units at once
• No computer needed
• Simple fleet management and recordkeeping
• Alarm and parameters adjustment
• Quickest bump test on the market today

Additional technologies that ensure compliance, safety, and maximum productivity:

• Self testing capabilities with Reflex Technology™ each day (24 hours), the BW clip will perform internal testing to insure it is in peak operating conditions. This will keep downtime to a minimum and help maintain a safe work environment.
• Surecell™ dual reservoir technology enjoy extremely quick response times. Much faster and efficient than standard electromechanical sensors. And the BW clip is made to function in the toughest of environments.

Standard features:

• Light, compact, and easy to use
• Inexpensive operating costs
• Maintenance free (one push button) operation
• 95 decibel alarm that also vibrates and flashes, for maximum safety
• Ability to log 35 gas events and bump tests
• Electronics, sensor, and battery, are all self-testing
• Rated for harsh working conditions non condensing means it will function well in areas of extreme humidity and in temperatures as high as 122F or low as -40F.
• Warranty 2 years and up to an additional year of shelf life
• Low level alarm is 5 ppm and high level is 10 ppm

Alarm Configurations:

• Alarm plus gas level reading
• Current time
• Tells you when a bump test is due user can set or can be set by management software

Part Number: BWC2H510

BW Clip 2 Year Single Gas Detector, Oxygen (O2), Low - 19.5 vol. / High - 23.5 vol., 50 unit bulk pack by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-X-B50

XNX-AMAE-RNNNN XNX Universal Transmitter, ATEX M25 AL RLY FOR TOX/O2 SNSR by Honeywell Analytics

XNX Universal Transmitter, ATEX M25 AL FF HRT FOR TOX/O2 SNSRThe XNX Universal Transmitter, now with HART EDDL, marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs.

XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) software provides users with an at-a-glance indication of the health of their gas detectors in the field.

Bringing together the best solutions in gas detection

Electrochemical

• Proven electrochemical sensing technology
• Surecell™ electrochemical cells are ideal for hot and humid environments
• Long life sensing cells (typical >2 years)
• Patented 'Reflex' sensing element verification diagnostics
• Sensor recognition software auto configures transmitter
• Plug and play factory configured sensors
• Intrinsically safe sensor connection permits hot swap, reducing down time

Catalytic Bead

• Supports Honeywell Analytics 705, 705HT, Sensepoint, Sensepoint HT and MPD sensors
• Fast response to wide range of hydrocarbons and flammables

Infrared (Open Path IR, Point IR, IR Cell)

• Supports Honeywell Analytics Searchline Excel, Searchpoint Optima Plus
• Failsafe operation
• Fast speed of response
• Reduced routine maintenance
• Immune to catalytic poisons
• Long operating life
• Works in inert atmospheres

High performance

• Flammable gas detection 0 to 100% LFL/LEL
• Point IR with heated optics provides immunity to poisoning and no hidden faults
• Open-path IR flammable gas detection in LEL-m measurement
• Electrochemical cell offers toxic gas detection in ppm
• IR cell provides CO₂ and combustible gas monitoring
• Robust and reliable operation in explosive areas and harsh environments

Flexible Operation

• 3 versions - supports (Catalytic Bead and IR Cell), Electrochemical Cell and IR (point and open-path) gas detection
• Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability
• 4-20mA with HART® as standard
• HART Enhanced Device Description Language (EDDL) software*
• Multiple communications options include up to 3 relays, MODBUS® and FOUNDATION® H1 Fieldbus
• Optional local IS port for handheld HART configurator

Easy to Use

• Large, backlit, easy-to-view LCD display offers multisensory indicators (visual icons, colored buttons, text, etc.) to display gas and sensor readings
• User interface supported by 8 selectable languages (English, Spanish, German, Italian, Portuguese, French, Russian, Chinese)
• Self-test and fault indication features
• Non-intrusive, one-man operation
• Quick calibration with auto-inhibit

Easy to Install

• 3 or 4 wire operation, source, sink or isolated
• Simple plug-in sensors and replaceable cells
• NEMA 4X IP66 rated for rugged indoor/outdoor use
• Five conduit entries for ease of installation

Cost Effective

• Minimal training required
• One-man operation
• Plug-in sensor replacement
• All necessary accessories included

XNX-AMAV-RNNNN XNX Universal Transmitter, ATEX M25 AL RLY FOR MV SNSR by Honeywell Analytics

XNX Universal Transmitter, ATEX M25 AL FF HRT FOR TOX/O2 SNSRThe XNX Universal Transmitter, now with HART EDDL, marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs.

XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) software provides users with an at-a-glance indication of the health of their gas detectors in the field.

Bringing together the best solutions in gas detection

Electrochemical

• Proven electrochemical sensing technology
• Surecell™ electrochemical cells are ideal for hot and humid environments
• Long life sensing cells (typical >2 years)
• Patented 'Reflex' sensing element verification diagnostics
• Sensor recognition software auto configures transmitter
• Plug and play factory configured sensors
• Intrinsically safe sensor connection permits hot swap, reducing down time

Catalytic Bead

• Supports Honeywell Analytics 705, 705HT, Sensepoint, Sensepoint HT and MPD sensors
• Fast response to wide range of hydrocarbons and flammables

Infrared (Open Path IR, Point IR, IR Cell)

• Supports Honeywell Analytics Searchline Excel, Searchpoint Optima Plus
• Failsafe operation
• Fast speed of response
• Reduced routine maintenance
• Immune to catalytic poisons
• Long operating life
• Works in inert atmospheres

High performance

• Flammable gas detection 0 to 100% LFL/LEL
• Point IR with heated optics provides immunity to poisoning and no hidden faults
• Open-path IR flammable gas detection in LEL-m measurement
• Electrochemical cell offers toxic gas detection in ppm
• IR cell provides CO₂ and combustible gas monitoring
• Robust and reliable operation in explosive areas and harsh environments

Flexible Operation

• 3 versions - supports (Catalytic Bead and IR Cell), Electrochemical Cell and IR (point and open-path) gas detection
• Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability
• 4-20mA with HART® as standard
• HART Enhanced Device Description Language (EDDL) software*
• Multiple communications options include up to 3 relays, MODBUS® and FOUNDATION® H1 Fieldbus
• Optional local IS port for handheld HART configurator

Easy to Use

• Large, backlit, easy-to-view LCD display offers multisensory indicators (visual icons, colored buttons, text, etc.) to display gas and sensor readings
• User interface supported by 8 selectable languages (English, Spanish, German, Italian, Portuguese, French, Russian, Chinese)
• Self-test and fault indication features
• Non-intrusive, one-man operation
• Quick calibration with auto-inhibit

Easy to Install

• 3 or 4 wire operation, source, sink or isolated
• Simple plug-in sensors and replaceable cells
• NEMA 4X IP66 rated for rugged indoor/outdoor use
• Five conduit entries for ease of installation

Cost Effective

• Minimal training required
• One-man operation
• Plug-in sensor replacement
• All necessary accessories included

XNX-UTSE-NNNNN XNX Universal Transmitter, UL 3/4 SS FOR TOX/O2 SNSR by Honeywell Analytics

XNX Universal Transmitter, ATEX M25 AL FF HRT FOR TOX/O2 SNSRThe XNX Universal Transmitter, now with HART EDDL, marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs.

XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) software provides users with an at-a-glance indication of the health of their gas detectors in the field.

Bringing together the best solutions in gas detection

Electrochemical

• Proven electrochemical sensing technology
• Surecell™ electrochemical cells are ideal for hot and humid environments
• Long life sensing cells (typical >2 years)
• Patented 'Reflex' sensing element verification diagnostics
• Sensor recognition software auto configures transmitter
• Plug and play factory configured sensors
• Intrinsically safe sensor connection permits hot swap, reducing down time

Catalytic Bead

• Supports Honeywell Analytics 705, 705HT, Sensepoint, Sensepoint HT and MPD sensors
• Fast response to wide range of hydrocarbons and flammables

Infrared (Open Path IR, Point IR, IR Cell)

• Supports Honeywell Analytics Searchline Excel, Searchpoint Optima Plus
• Failsafe operation
• Fast speed of response
• Reduced routine maintenance
• Immune to catalytic poisons
• Long operating life
• Works in inert atmospheres

High performance

• Flammable gas detection 0 to 100% LFL/LEL
• Point IR with heated optics provides immunity to poisoning and no hidden faults
• Open-path IR flammable gas detection in LEL-m measurement
• Electrochemical cell offers toxic gas detection in ppm
• IR cell provides CO₂ and combustible gas monitoring
• Robust and reliable operation in explosive areas and harsh environments

Flexible Operation

• 3 versions - supports (Catalytic Bead and IR Cell), Electrochemical Cell and IR (point and open-path) gas detection
• Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability
• 4-20mA with HART® as standard
• HART Enhanced Device Description Language (EDDL) software*
• Multiple communications options include up to 3 relays, MODBUS® and FOUNDATION® H1 Fieldbus
• Optional local IS port for handheld HART configurator

Easy to Use

• Large, backlit, easy-to-view LCD display offers multisensory indicators (visual icons, colored buttons, text, etc.) to display gas and sensor readings
• User interface supported by 8 selectable languages (English, Spanish, German, Italian, Portuguese, French, Russian, Chinese)
• Self-test and fault indication features
• Non-intrusive, one-man operation
• Quick calibration with auto-inhibit

Easy to Install

• 3 or 4 wire operation, source, sink or isolated
• Simple plug-in sensors and replaceable cells
• NEMA 4X IP66 rated for rugged indoor/outdoor use
• Five conduit entries for ease of installation

Cost Effective

• Minimal training required
• One-man operation
• Plug-in sensor replacement
• All necessary accessories included

XNX-UTSV-RHIC1 XNX Universal Transmitter, UL 3/4 SS RLY HRT MPD IR CO2 VV by Honeywell Analytics

XNX Universal Transmitter, ATEX M25 AL FF HRT FOR TOX/O2 SNSRThe XNX Universal Transmitter, now with HART EDDL, marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs.

XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) software provides users with an at-a-glance indication of the health of their gas detectors in the field.

Bringing together the best solutions in gas detection

Electrochemical

• Proven electrochemical sensing technology
• Surecell™ electrochemical cells are ideal for hot and humid environments
• Long life sensing cells (typical >2 years)
• Patented 'Reflex' sensing element verification diagnostics
• Sensor recognition software auto configures transmitter
• Plug and play factory configured sensors
• Intrinsically safe sensor connection permits hot swap, reducing down time

Catalytic Bead

• Supports Honeywell Analytics 705, 705HT, Sensepoint, Sensepoint HT and MPD sensors
• Fast response to wide range of hydrocarbons and flammables

Infrared (Open Path IR, Point IR, IR Cell)

• Supports Honeywell Analytics Searchline Excel, Searchpoint Optima Plus
• Failsafe operation
• Fast speed of response
• Reduced routine maintenance
• Immune to catalytic poisons
• Long operating life
• Works in inert atmospheres

High performance

• Flammable gas detection 0 to 100% LFL/LEL
• Point IR with heated optics provides immunity to poisoning and no hidden faults
• Open-path IR flammable gas detection in LEL-m measurement
• Electrochemical cell offers toxic gas detection in ppm
• IR cell provides CO₂ and combustible gas monitoring
• Robust and reliable operation in explosive areas and harsh environments

Flexible Operation

• 3 versions - supports (Catalytic Bead and IR Cell), Electrochemical Cell and IR (point and open-path) gas detection
• Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability
• 4-20mA with HART® as standard
• HART Enhanced Device Description Language (EDDL) software*
• Multiple communications options include up to 3 relays, MODBUS® and FOUNDATION® H1 Fieldbus
• Optional local IS port for handheld HART configurator

Easy to Use

• Large, backlit, easy-to-view LCD display offers multisensory indicators (visual icons, colored buttons, text, etc.) to display gas and sensor readings
• User interface supported by 8 selectable languages (English, Spanish, German, Italian, Portuguese, French, Russian, Chinese)
• Self-test and fault indication features
• Non-intrusive, one-man operation
• Quick calibration with auto-inhibit

Easy to Install

• 3 or 4 wire operation, source, sink or isolated
• Simple plug-in sensors and replaceable cells
• NEMA 4X IP66 rated for rugged indoor/outdoor use
• Five conduit entries for ease of installation

Cost Effective

• Minimal training required
• One-man operation
• Plug-in sensor replacement
• All necessary accessories included

2106B1806 Sensepoint Hazardous Area Approved Gas Detector, CO 0-200 ppm Toxic Sensor 3/4NPT CSA by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

Fit For Purpose

• Flammable, toxic and Oxygen versions available
• High performance, low cost
• Suitable for new and retro fit applications

Proven Sensor Technology

• Surecell™ electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life

ATEX/IECEx Certified

• Complies with the latest standards
• Hazardous area approval and performance
• IP65/67 for use in harsh environments

Easy to Use

• Factory set operation
• Simple to replace
• Minimal training required

Range of Accessories

• Weatherproof cap
• Flow adaptor
• Duct mounting kit
• Collecting cone