Intellidox

BW Technologies Honeywell IntelliDoX Nest for Honeywell BW Solo

Part Number: DX-NEST-SOLO

BW Technologies IntelliDoX Retractable Stand/Wall Mount (Kit of 5)

Part Number: DXSTAND

BW Technologies IntelliDoX Mobile Case (Standard)

Part Number: DX-CASE

BW Technologies IntelliDoX Nest for GasAlertMicroClip XL/X3

Part Number: DX-NEST-MCLP

BW Technologies IntelliDoX Vehicle Power Adaptor

Part Number: DX-VPA

BW Technologies IntelliDoX Multi-Inlet Key

Part Number: DXMIKEY

DX-BWC4 IntelliDoX Docking Station for BW Clip4 by BW Technologies

IntelliDoX is a high tech way to combine your Fleet Manager II software with docking modules. It's as easy as connecting the gas monitor to the docking module. The IntelliDoX does all the testing for you and transfers the data from the unit to the IntelliDoX . With this form of automatic management, you increase productivity, efficiency, and reliability. In addition, the entire unit only weighs a little over four pounds.

Do your workers have to wait in line for bump tests at the start of each shift? This is no longer needed when you have the IntelliDoX system in place. It takes under 30 seconds to bump test 5 units at one time.

Do you have a great deal of monitors to keep up with? You can gang together as many as five IntelliDoX to manage a large fleet of gas detectors at the same time. Five units can bump test as many as 50 detectors in less than three minutes. And each module can work on its own.

The IntelliDoX can work by itself or can be networked with an Ethernet connection. Keeping track of records has never been easier. For example, you will enjoy quick and easy access to peak exposures, bump test results, and other important detection data.

Fast bump only takes 10 seconds. Standard bump is 40 seconds, and it can be placed in hibernation mode. The IntelliDoX comes with a complete 2 year warranty.

Features

When you use your IntelliDoX with Fleet Manager II you can configure these settings for your gas detectors

• Peak reading display
• Time of peak reading
• High alarm set point
• Low alarm set point
• Alarm with gas readings
• Clock
• Bump test reminder
• Noncompliance indication
• Engage hibernation mode

Your IntelliDoX Comes with:

• Wall mount also works as a stand and is retractable
• Ethernet port
• USB port
• Guide for quick reference
• Manual with CD
• IntelliDoX module nest for portable gas detector has been installed at the factory.
• Software CD Fleet Manager II

You will need to purchase an enabler kit for every five units banked together. The kit comes with power supply and hoses.

Part Number: DX-BWC4

DX-CP IntelliDoX Docking Station for Icon and Flex Range by BW Technologies

IntelliDoX is a high tech way to combine your Fleet Manager II software with docking modules. It's as easy as connecting the gas monitor to the docking module. The IntelliDoX does all the testing for you and transfers the data from the unit to the IntelliDoX . With this form of automatic management, you increase productivity, efficiency, and reliability. In addition, the entire unit only weighs a little over four pounds.

Do your workers have to wait in line for bump tests at the start of each shift? This is no longer needed when you have the IntelliDoX system in place. It takes under 30 seconds to bump test 5 units at one time.

Do you have a great deal of monitors to keep up with? You can gang together as many as five IntelliDoX to manage a large fleet of gas detectors at the same time. Five units can bump test as many as 50 detectors in less than three minutes. And each module can work on its own.

The IntelliDoX can work by itself or can be networked with an Ethernet connection. Keeping track of records has never been easier. For example, you will enjoy quick and easy access to peak exposures, bump test results, and other important detection data.

Fast bump only takes 10 seconds. Standard bump is 40 seconds, and it can be placed in hibernation mode. The IntelliDoX comes with a complete 2 year warranty.

Features

When you use your IntelliDoX with Fleet Manager II you can configure these settings for your gas detectors

• Peak reading display
• Time of peak reading
• High alarm set point
• Low alarm set point
• Alarm with gas readings
• Clock
• Bump test reminder
• Noncompliance indication
• Engage hibernation mode

Your IntelliDoX Comes with:

• Wall mount - also works as a stand and is retractable
• Ethernet port
• USB port
• Guide for quick reference
• Manual with CD
• ntelliDoX module - nest for portable gas detector has been installed at the factory.
• Software CD - Fleet Manager II

You will need to purchase an enabler kit for every five units banked together. The kit comes with power supply and hoses.

Part Number: DX-CP

BW Technologies IntelliDoX Mobile Case (Large)

Part Number: DX-CASE1

BW Technologies IntelliDoX - Bag of 10 O-Rings

Part Number: DX-RINGS

BW Technologies IntelliDoX Inlet Filters (Kit of 5)

Part Number: DXIF5

BW Technologies IntelliDoX Universal Inlet Cover (Kit of 5)

Part Number: DXCOVER

A gas detector with unequalled performance and custom options

 

Do you need a more efficient way to manage your gas detector fleet? Now you can use the IntelliDox smart docking system with your Fleet Manager II program. This automates the process to make you more productive and efficient.

Easy management combined with greater productivity

Installing IntelliDoX is fast and easy. It only takes a few minutes to set up the 5-unit docking system. It's simple to multi-task because every module can operate independently with its own screen, pump, and operating system. It's possible to calibrate 4 units while bump testing another one, so you increase efficiency and save time.

Configuration flexibility for changing needs

With the new IntellDox smart docking system, you control many of the settings. This includes alarm for high and low parameters. Your detector equipment will always meet your specifications.

Simplify data management and networking

Data transfer is quick and simple. Store and transfer gas detection info like bump tests via Ethernet cable or USB.

• Take customizing to an entirely new level
• Modules can be expanded to five units
• Setup is uncomplicated and fast
• Many options, including worker compliance tracking

 

Compatible units

GasAlertMicroClip Series
BW Clip Series
ConneX1

 

Outstanding Bump Test Performance

Bump testing has never been easier or more efficient. With the help of FastBump, you can quickly bump test your detectors while saving on bump test gas. It revolutionizes the bump testing process.

Features:

• Now you can calibrate, bump test, configure, and track data with compatible gas detectors. Users can update these settings: Display Gas Concentration Readings with Alarm; Change Alarm Settings; Time Display Preferences; Transfer Event Logs Data; Non-compliance Indicator Enabling; Hibernate unit; Schedule Reminders for Bump Tests and Calibration; Firmware update
• Modules have their own keypads and LCD screens - gangable up to 5 units
• Ethernet port for easy network connection
• Change module settings or transfer data via USB port - no network connection needed.
• Best in the industry FastBump Test - eliminates wasteful purge cycles and bottlenecks
• Easy setup - you don't need any tools
• No need for manual bump testing or calibration

 

Specs for IntelliDoX

Size (w x h x d): 5.4 x 14.2 x 4.3 in. (13.8 x 36.2 x 10.9 cm) (individual docking module)
Weight: 4.2 lb (1.91 kg)
Power supply: 12 V / 8.33A ITE
Real-time clock: Time and date stamp
Communications method: 2-way (infrared) communications between docking module and detector

External interface

• One USB port
• One Ethernet port

 

Menu navigation

• Display settings
• Time and date
• Gas inlets
• Review IntelliDoX module
• Password protect (when enabled)
• UI display language: English, French, German, Portuguese and Spanish options

 

Automatic testing

• FastBump - ten seconds
• Standard bump - forty seconds

 

Internal Data Storage: 2 GB

 

Pump

• Independent pump (each IntelliDoX module)
• Flow Rate: 350 ml/min

 

Instrument Management System: Fleet Manager II, v 4.0 or higher

Ratings

• Device complies with FCC Part 15 and ICES-003
• Canadian EMI requirements. Operation is subject to the following two conditions: (1) Device may not cause harmful interference, (2)  Must accept any interference received (includes interference which may cause undesired operation).

 

Warranty: Full two-year warranty

Accessories and Options

Portable Kit – IntelliDoX fully portable station with Pelican case. Kit contains: 2 docking modules, AC power supply, ethernet cable, tubing, demand flow regulator, and more.

Multi-Inlet Key

Configure one IntelliDoX module to connect multiple calibration gas

Complete list of kits and accessories is available.

DUE TO ONGOING RESEARCH & PRODUCT IMPROVEMENT, SPECS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Part Number: DX-CLIP

BW Technologies AC Power Supply for IntelliDoX, EU version (Europe)

Part Number: DX-PS-EU

BW Technologies AC Power Supply for IntelliDoX, UK version (United Kingdom)

Part Number: DX-PS-UK

BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 10 ppm / High - 15 ppm, Black Housing by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-H-B

BWC2R-H510 BW Clip RT 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), (Low 5 ppm / High 10 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-H510

BW Clip 2 Year Single Gas Detector by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

BWS1-R-B BW Solo Single-Gas Detector, Hydrogen (H2) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-R-B

BWC2-H BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 10 ppm / High - 15 ppm by BW Technologies

Are you looking for a cost effective and reliable H2S detector to keep workers safe and compliant? The BW Clip BWC2-H is one of the easiest to operate and most dependable portable gas detectors on the market today. In fact, it is designed to deliver maintenance free operation for an entire two years. It is simple to use and there is no need to calibrate. It never needs new batteries or battery charging, and the sensor never needs replacing. It provides a low level alarm at 10 ppm and high level at 15 ppm.

If you are not going to use the BW Clip for a week or longer, just place it inside its special hibernation case. This will extend its life by that amount of time.

MicroDock II and Fleet Manager II compatible and the BW Clip BWC2-H will fit right in with your IntelliDoX instrument management system, and you'll enjoy a host of benefits from BW clip units with IntelliDoX technology, such as:

• Testing for 5 units at one time
• Extremely fast bump tests (fastest in the industry)
• Parameter and alarm set point adjustment
• Email notices and easy recordkeeping

BW Clip includes:

• Self test function thanks to Reflex Technology™ your gas sensor will test itself every day to ensure safety, instill worker confidence, and limit downtime.
• Dual reservoir design with Surecell™ technology, you have much faster response time and performance than standard electromechanical sensors. In addition, you'll receive excellent performance in the harshest of work environments.

Standard features includes:

• Lightweight and compact
• Maintenance free (one push button) operation
• 3 function alarm flashes, vibrates and loud 95 decibel sound
• Self testing battery, electronics, and sensor
• Low operating costs
• Rated for extreme temperatures and environments
• Logs last 35 H2S events and bump tests

Configuration Options:

• Flashing red noncompliance indicator - enable bump test due or gas event
• Set both low and high alarm set points prior to activation
• Gas reading can be given with alarm
• Bump test reminder can be set by user
• Display can include the current time of day

Part Number: BWC2H

BW Technologies IntelliDoX Enabler Kit, NA Version (North America)

Part Number: DXENBLNA

BW Technologies IntelliDoX Enabler Kit, EU version (Europe)

Part Number: DX-ENBL-EU

BW Technologies IntelliDoX Nest for BW Clip4

Part Number: DX-NEST-BWC4

BW Technologies IntelliDoX Nest for BW MaxXT II

Part Number: DX-NEST-MAXXT