Bw Solo Nh3

BWS1-A2-Y BW Solo Single-Gas Detector, (NH3 ext range) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-A2-Y

BWS-A2-Y BW Solo Single-Gas Detector, (NH3 ext range) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-A2-Y

BWS-A-B BW Solo Single-Gas Detector, (NH3) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-A-B

BWS1-A-B BW Solo Single-Gas Detector, (NH3) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-A-B

BWS1-A-Y BW Solo Single-Gas Detector, (NH3) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-A-Y

Safety And Compliance In New Single-Gas Detection Solutions

 

Increase your single-gas detection ability with equipment that is easy to service and operate. Replacing the ToxiPro®and the GasAlert Extreme, the Honeywell BW™ Solo is the new generation of detector, offering a full selection of sensor choices. Upgrading to the Honeywell BW™ Solo allows you to: Obtain compliance Connect workers Increase equipment life cycle while decreasing ownership cost Increase worker safety

 

Smaller Size

The smaller size and lightweight design make the Honeywell BW™ Solo a top choice for any workplace or environment.

Simplicity of Design

The Honeywell BW™ Solo is simple in its design, making it easy to change out sensor filters, batteries, and even the sensor anywhere in the field. No tools required, just pop open and door and complete the replacement.

A Full Range Of Sensor Options

Regardless of the workplace or the type of exotic or common gas detection required, the Honeywell BW™ Solo offers the right sensor of the job.

The detector can be used for:

• Carbon monoxide (CO)
• Chlorine dioxide (ClO₂)
• Chlorine (Cl₂)
• Oxygen (O₂)
• Ozone (O₃)
• Sulfur dioxide (SO₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Hydrogen sulfide (H₂S)
• Hydrogen (H₂)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Ammonia (NH₃)

 

Safer Workplaces And Greater Accuracy With the 1-Series Sensor

For frequent gas monitoring needs, the 1-Series sensor offers a durable, reliable sensor that offers a fast response as well as a long duty cycle. Using next-generation technology, this sensor offers more than just a basic detector while providing top performance in extreme environments.

When Detection Speed Matters

For rapid detection of O₂, H2S, and CO, the 1-Series sensor's square design and lower profile allows for rapid diffusion of the gas for faster detection and more accurate readings. As a small system, it is also streamlined and easy to work with, even in cramped locations.

Warranty Benefits

With typical use, the 1-Series sensor has a life cycle of up to five years, and it comes with a full three-year warranty. This means longer use, less downtime, and an increased ROI.

Developed In-House

The 1-Series sensor was developed by City Technologies, a Honeywell company. They are also the company that designed and developed the 40XV and the long life 40xLL oxygen sensor that are used in the Honeywell BW detectors.

No Nuisance Alarms

Are you frustrated with false alarms with your current detectors? The 1-Series sensor is highly reliable and accurate and can be used in areas with high humidity and transient pressures, as well as temperatures of -40°C to 60°C.

Easy Switching on the Job

Replacing a sensor has never been easier. With no need for specialized tools of complicated processes, just remove the old sensor and replace it with the sensor of your choice.

Greater Fleet Management Efficiency And Data Centralization

Streamlining data collection and management throughout the fleet provides greater efficiency while saving you time and money. Automated fleet management is simple with the Honeywell SafetySuite Device Configurator software and the IntelliDox.

Docking for Data Transfer and More

The IntelliDox makes it easy to simply put the detector in the dock to transfer test results and perform specific actions. These actions include changing set points, completing bump tests, turning on bump reminders, or calibration. It is an efficient way to update firmware for the Honeywell BW™ Solo. The software allows data to be sent to a storage computer over USB or Ethernet connection.

Grouping IntelliDox allows for up to five docks to be grouped together. Each can be used to control a specific detector independently, and all have a unique keypad, pump, cutting edge LCD screen, and operation options. Power and calibration gas are shared with the group for efficiency.

Manage Compliance in One Place

The Device Configurator operates on Windows-based software and allows for centralized import, viewing, and export of data across all detectors. It also allows for convenient configuration of set points, firmware update deployment, and compliance, safety, and productivity monitoring.

Adding Cloud Technology

For even greater versatility and access to data, plan to subscribe and upgrade to the Honeywell SafetySuite Device Manager that is a cloud-based service. This allows you to:

• See all detectors in the fleet in one easy to use interface
• Receive immediate text and email notifications of alarms
• Configure your reporting requirements
• Maximize compliance across the fleet
• Have all data in one convenient and accessible location

 

Additional benefits in linking your smartphone with the detector. As part of the Connected Worker portfolio offered by Honeywell, wireless technology makes managing the detector even easier.

Setup, Configuration, and Verification with an App

The Device Configurator app can be used to configure the Honeywell BW™ Solo detector with ease. This includes setting up the detector, choosing alarm set points, and setting up specific actions. Using BLE or Bluetooth Low Energy technology, this can all be done from up to six meters away.

The app is also handy to check calibration and bump data, and to access information on which worker performed the calibration, when the calibration was done, and what gas was tested. Additionally, it can email a certificate as needed or even manage firmware updates.

No Docking Station? No Problem

It is possible to easily and conveniently access data from the Honeywell BW™ Solo using wireless BLE. This allows the detector to share information with the desktop software from all detectors in the fleet.

Staying Connected

The Honeywell Safety Communicator mobile app allows immediate and real-time access to data without the need for docking, as well as information on worker location and safety. From your smartphone app, all types of readings and data are sent to our monitoring software. Managers can access the data from remote locations as long as they have an internet connection.

Safety, Compliance and Peace of Mind

 

Full Control at the Push of a Button

Working in the field means working with gloves and safety gear, and the Honeywell BW™ Solo takes this into consideration with a one-button operation. Both the button and the Honeywell SafetySuite Device Configurator software can be used to configure and adjust the detector parameters with ease. Measuring for time-weighted average (TWA) and short-term exposure limit, as well as the highest gas levels in the past 24-hours, are also accessible.

Detector Compliance or Non-Compliance

With just a glance at the Honeywell BW™ Solo, workers can see if it is in compliance or is not in compliance. The flashing green lights on the IntelliFlash™ system means it is bump tested and correctly functioning. Blinking red lights signal a problem, including a low battery, calibration or bump testing needs or gas event has occurred.

Easy to Detect Alarms

For noisy work environments, the Honeywell BW™ Solo offers audible alarms, vibrating patterns and red lights around the detector to signal danger.

Usage and Configuration

 

Assigned Detectors

Assigning detectors to workers and locations ensures precise location of gas events and user information.

Peak Readings on 24-Hour Rolling Basis

High gas levels that do not reach alarm parameters are still critical to track. The Honeywell BW™ Solo provides data for a rolling 24-hours, including peak gas readings for early detection of problems.

Language Options

Designed for use around the world, the Honeywell BW™ Solo provides gas readings in all major languages, including Japanese, Russian, English, Korean, Spanish, and French.

Part Number: BWS-A-Y

BWS-A2-B BW Solo Single-Gas Detector, (NH3 ext range) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-A2-B

Making portable single-gas detection convenient and accurate.

 

The next-generation in easy to operate and maintain gas detectors with a full line of sensors. Offering a replacement for the ToxiPro® and the GasAlert Extreme, the Honeywell BW™ Solo offers dependable, accuracy and reliability as well as: Workplace compliance Lower cost of lifetime ownership Wireless connectivity for workers Enhanced protection and safety

 

Practical, lightweight design

The smaller, compact design of the Honeywell BW™ Solo makes this a practical companion for any worker in any environment.

Low cost, long life, and easy service

Simplicity is the key design element in the Honeywell BW™ Solo. Changing a sensor filter is done through a pop off door in the front of the unit, and sensor and battery replacement is just as simple.

All the sensor you need for common and exotic gas

Used across all industries, including in steel manufacturing, petrochemical plants, and power plants, this sensor can detect:

• Ammonia (NH₃)
• Carbon monoxide (CO)
• Chlorine (Cl₂)
• Chlorine dioxide (ClO₂)
• Ethylene oxide (ETO)
• Hydrogen (H₂)
• Hydrogen sulfide (H₂S)
• Hydrogen cyanide (HCN)
• Nitrogen dioxide (NO₂)
• Nitrogen oxide (NO)
• Oxygen (O₂)
• Ozone (O₃)
• Phosphine (PH₃)
• Sulfur dioxide (SO₂)

 

The foremost single-gas detector to use the 1-Series sensor for increased performance, accuracy, and safety.

As a next-generation sensor, the 1-Series sensor is the optimal sensor in any environment, offering long life, top performance, and fast response.

Detecting CO, H₂S, and O₂ – with more to come

With a sensor that is about one-third the size of others in the industry, as well as a unique square shape, the design of the detector is small and compact. The square shape also allows faster gas diffusion for more rapid response times.

3-year warranty coupled with up to 5-year sensor life

For the lower cost of ownership, less downtime, and fewer sensor replacement requirements, the 1-Series sensor cannot be beaten. With typical gas exposure, the sensor lasts up to 5 years, and the 3-year warranty offers peace of mind.

Developed in-house.

Developed by Honeywell company City Technology, the 1-Series sensor has over 40 years of sensor expertise and experience behind its design. It is crafted with reliability and quality in mind, similar to the City Technology's 40xLL and the 40VX oxygen sensors in the Honeywell BW.

End nuisance alarms across environments.

The 1-Series sensor is tested to work in environments where high humidity, transient pressure, and temperatures from -40°C to 60°C are factors to consider. With proven accuracy in even the most demanding environments, these are the ideal sensors for any location.

Sensor switch-out without any risk of damage.

As a practical design feature, the 1-Series sensor allows for the replacement of sensors without any exposure to the printed circuit board, making the process easy and safe.

Add efficiency with centralized data and fleet management automation.

Combining the features of the Honeywell BW™ Solo, IntelliDox, and Honeywell SafetySuite Device Configurator software offers increased compliance, productivity, and safety.

The IntelliDox docking solution for automation

The IntelliDox dock allows you to connect the Honeywell BW™ Solo and complete a range of automated tasks, including data transfer, bump tests, changing set points for alarms, and completing calibration and bump reminders. It is also an ideal option for updating firmware. Using the fleet management software ensures that all peak readings, alarms, and required data can be quickly transmitted using USB or Ethernet.

Grouping up to five IntelliDox docks allows for individual detector operation with shared power and calibration gas. All docks come with a state-of-the-art LCD screen, pump, and keypad for easy operation.

Device Configurator software

The Windows-based Device Configurator software allows for export and viewing of data, configuration of the detector, and firmware updates all from your computer. This makes fleet management compliance, productivity, and safety much more manageable.

Added benefits with the cloud-based Honeywell SafetySuite Device Manager

Subscribing to the cloud-based technology offered by Honeywell SafetySuite Device Manager allows you to:

• See all detectors, alarms, and compliance status on one dashboard for quick identification of problems and gas events.
• Prepare reports.
• Store reports in a centralized location for easy retrieval for investigations and audits.
• Receive real-time alarm notifications via text or email.
• Add compliance features.

 

Increase convenience and operation simplicity with smartphone control of the Honeywell BW™ Solo. As a central part of the Connected Worker portfolio available through Honeywell, the wireless version increases convenience and safety.

Get the app to setup, configure, and verify.

For any worker with a smartphone, simply pairing the Honeywell BW™ Solo and using the Device Configurator app is an effective way to setup, configure and adjust all parameters of the detector, as well as complete firmware updates. The technology uses Bluetooth Low Energy (BLE) and can be operated from up to 6 meters away from the detector.

The app can review calibration and bump data, and even see who completed the calibration, when it was done, and the specific gas. This information can also be emailed in a certified to required stakeholders.

Connect without a docking station.

For larger fleets, using a smartphone app eliminates the need for the IntelliDox docking station. This allows easy sharing of data through the cost-effective app format.

Remote safety monitoring.

Knowing what is happening in real-time is important for safety managers, and the app allows this without the need to dock the detector. Data is sent through the Safety Communicator app to the real-time Honeywell monitoring software. Information is then available through any internet-connected device for worker location and safety.

Operational ease for increased compliance throughout the workplace.

 

Single-button control and operation

Working in the field often means gloves and safety gear, and the Honeywell BW™ Solo takes this into consideration with easy one-button control, ideal for use with gloves. In addition, the Honeywell SafetySuite Device Configurator software can also be used to configure, adjust, and set parameters on the detector. It is also simple to access data on STEL (short-term exposure limits), TWA (time-weighted average), and peak gas readings over a rolling 24 hours.

Visible confirmation of detector compliance or noncompliance

The Honeywell BW™ Solo can be set up to show compliance or out of compliance status. Compliance status is indicated by green lights when the IntelliFlash™ is activated, which means it is operating correctly and has been bump tested.

The option to monitor for noncompliance is also done through the IntelliFlash™ feature. This is a flashing red light on the detector that indicates a gas event, the need for calibration, or the need for a new battery.

Variety of alarms to hear and see

When an alarm occurs, the Honeywell BW™ Solo illuminates with red LED lights around the screen. In addition, the detector vibrates while also emitting a loud alarm that is easy to hear and see in any environment.

Configure and use the detector with ease.

 

Track locations and workers

The detector can be assigned to locations or workers for rapid detection of alarms and gas events.

Rolling 24-hour peak readings

High gas readings under the level to trigger the alarm can be monitored with the rolling 24-hour peak reading record. This is essential to determine potential safety issues before they are serious concerns.

Display in major languages

The Honeywell BW™ Solo offers data on the screen in a range of different major languages for efficiency and safety.

Part Number: BWS1-A2-B

Making single-gas detection portable and effective with next-generation capabilities.

 

Easy to service, easy to operate, and all the sensor options required. As a replacement for the GasAlert Extreme and the ToxiPro®, the Honeywell BW™ Solo provides all of the features of these top gas detectors as well as: Longer life for greater return on investment Increased compliance Making it easy for workers to be connected Boosting safety and protection on the job

 

Manageable and Lightweight

Featuring a low, lightweight profile and a practical design, the Honeywell BW™ Solo is ideal in any working environment.

Making simple detector service a priority

To avoid having to disassemble the detector to replace a sensor filter, sensor, or battery, the Honeywell BW™ Solo offers a simple service solution. Just pop open the appropriate door on the detector for easy replacement.

Beyond hydrogen, oxygen, and carbon monoxide detection

In any workplace, including steel manufacturing and power plants, the Honeywell BW™ Solo offers a range of sensors including:

• Ammonia (NH₃)
• Ozone (O₃)
• Hydrogen sulfide (H₂S)
• Sulfur dioxide (SO₂)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

 

Increasing worker safety with the 1-Series sensor, the first in a single-gas detector.

As a next-generation detector, the Honeywell BW™ Solo uses the 1-Series sensor for fast response, accuracy, reliability, and a long life in any type of environment.

Adding to the gas types CO, H₂S, and O₂

Currently, the 1-Series sensor provides fast response for CO, H₂S, and O₂, with additional gas types coming onboard shortly. The design is smaller, about a third of the height of traditional sensors, and features a compact, square design for rapid gas diffusion and response times.

Extraordinary life and warranty.

With the 1-Series sensor, expect up to 5 years of sensor life with typical gas detection use, and the benefits of a 3-year warranty. With limited downtime and extended duty cycle, you have peace of mind in knowing this reduces the cost of ownership.

Developed by City Technologies – a Honeywell company.

The 1-Series sensor is developed by City Technologies, the Honeywell company responsible for the development of the 40XV and the 40xLL oxygen sensors used in the Honeywell BW detector. In addition to 40 years of experience, they provide quality and exacting standards to their sensor development.

Accuracy and performance.

Nuisance alarms creating problems? Adding the 1-Series sensor eliminates these false alarms while providing accurate readings in environments with transient pressure, high humidity, and temperatures from -40°C to 60°C.

Sensor switch-out without a hassle.

The design of the 1-Series sensor means there is no need to open the housing to expose the printed circuit board or interior circuitry to replace a sensor. It is as simple as taking out the old and dropping in the new.

Step up to automated fleet management and centralized data.

Combining the Honeywell BW™ Solo with the IntelliDox and the Honeywell SafetySuite Device Configurator software allows for optimal management of data and detectors.

The IntelliDox advantage for automation, configuration, and data centralization.

The IntelliDox dock allows the detector to be placed in position and automatically transfer data and complete requested actions. These actions include setting bump reminders, doing bump tests, calibrating the detector, or change set points. Connecting to a USB or Ethernet connection allows fleet management software to automatically transfer data to a computer for centralization.

The IntelliDox can also be grouped. Each continues to function as an independent system with an LCD, keypad, and pump, but shares both power and gas for calibration.

The Device Configurator software advantage.

Windows-based, the Device Configurator software allows for easy access to data, configuration of set points for alarms, fleet firmware updates, and other actions that improve productivity, safety, and compliance.

Immediate notification through the cloud.

Using the subscription service for the Honeywell SafetySuite Device Manager in the cloud allows your company to:

• Monitor all gas detectors in real-time through one easy to use dashboard. This includes multiple detectors across multiple sites.
• Customize reports
• Provide easy, centralized data for audits, investigations, and review
• Real-time notification of alarms via text or email
• Added compliance features

 

Further simplification and convenience with smartphone apps for detector management. Wireless control of the detector is possible and easy through the Connected Workers portfolio and your smartphone.

The advantage of using the mobile app.

The Honeywell BW™ Solo can be paired or linked with any smartphone, allowing the Device Configurator app to be a control for the detector. This allows the user to configure, set up the detector, determine alarm set points, and update firmware using Bluetooth Low Energy (BLE) at a distance of up to 6 meters away.

The app can be used to read the last calibration or bump data, when it occurred, and who it was completed by. It can also provide a certificate that can be mailed to required stakeholders for requirements for launch.

Eliminates the needs for docking stations.

For fleets, using a wireless option with the Honeywell BW™ Solo eliminates the need to have docking stations to transmit data. Using BLE, the app can read information and transfer it to the desktop software for centralized data management and reporting.

Increasing worker safety monitoring for remote safety managers.

The Safety Communicator app from Honeywell allows the safety manager or designated managers to see vital data without the need for docking. When the app and detector are paired through a smartphone, data is transferred in real-time to the monitoring software, where it is accessible by any internet-connected device.

Combining worker safety and increased compliance.

 

Practical one-button control and operation.

Using the Honeywell BW™ Solo is easy in any environment, even when wearing gloves. A single button is used for manual operation of the detector, or it can be configured with the Honeywell SafetySuite Device Configurator software. Both options allow for latching alarms, configuring set points, and adjusting parameters. It provides measurements for STEL (short-term exposure levels), TWA (time-weighted average) as well as peak gas readings over 24 hours.

Options for compliance or out of compliance determination

For at a glance confirmation of the detector being in or out of compliance, the IntelliFlash™ system allows for either option. A green flashing light signals the detector is correctly monitoring and has had a bump test.

With the noncompliance flash activated, a red light indicates the need for a battery replacement, calibration, bump test, or if there has been a detected gas event.

Combining auditory and visual alarms

In addition to a loud, distinct alarm with the Honeywell BW™ Solo, there is also the additional red LED lights around the display. The detector also vibrates, making it easy to see and hear in any location.

Simple to set up and to operate.

 

Know locations

By assigning the detector to an employee or a location, gas events are easy to pinpoint.

The peak 24-hour rolling reading advantage

Peak gas levels that are below the alarm settings are recorded with the Honeywell BW™ Solo. These are set on a rolling 24-hour basis, allowing early detection of potential safety issues.

Language options around the world

For international use, the gas readings on the detector can be displayed in all major languages.

Part Number: BWS-C-Y

Introducing the Honeywell BW™ Solo, the next generation in compact single-gas detectors.

 

Designed to be easy to use, simple to service, and to provide the sensor options you need. Replacing the GasAlert Extreme and the ToxiPro®, the Honeywell BW™ Solo offers all of their advantages plus it also: Assists with increased compliance Allows workers to stay connected Lowers the ownership costs Boosts worker safety and protection

Convenient Size

Small, lightweight, and compact, the Honeywell BW™ Solo is easy to use in any work environment, making it a favorite for workers.

Effective Single-Gas Detector

With the combination of the low cost and the long life of the Honeywell BW™ Solo, it is a very effective and reliable gas detector. Need to replace a sensor filter? Just open the door on the front. The same no-tools needed method can be used to change the sensor or the battery.

Single Gas Detection Options

The versatility and ease of sensor switch out on the Honeywell BW™ Solo makes it the ideal detector across any industry. It can be used in the manufacturing and petrochemical industries, as well as in power plants and steel mills to detect the following:

• Ammonia (NH₃)
• Hydrogen sulfide (H₂S)
• Hydrogen (H₂)
• Hydrogen cyanide (HCN)
• Carbon monoxide (CO)
• Chlorine (Cl₂)
• Chlorine dioxide (ClO₂)
• Oxygen (O₂)
• Sulfur dioxide (SO₂)
• Nitrogen oxide (NO)
• Nitrogen dioxide (NO₂)
• Ozone (O₃)
• Ethylene oxide (ETO)
• Phosphine (PH₃)

 

Increase worker safety with the 1-Series sensor for lower operating costs, higher reading accuracy, and faster response.

When fast response, long life, and the ability to provide dependable results in critical, look no further than the 1-Series sensor for common gases.

Oxygen, Hydrogen Sulfide, and Carbon Monoxide

Currently, the 1-Series sensor is available for use with CO, H₂S, and O₂. With the unique square design that allows for rapid gas diffusion, it offers fast response times with a streamlined, low-profile sensor. At just a third of the height of other sensors, it is much easier to work with.

Sensor Life and Warranty

Based on typical use and gas exposure, the 1-Series sensor can last up to five years, lowering the cost of ownership while also limited downtime. It also comes with a three-year warranty, protecting your investment.

Developed by Honeywell

City Technology, a company with over 40 years in the sensor industry, is a Honeywell company. By utilizing this experienced in-house company, we are able to offer the next-generation in reliability and quality. City Technology is the company responsible for the 40XV and 40xLL oxygen sensor used with our Honeywell BW detector.

Stop Nuisance Alarms

Designed to provide accurate readings in temperatures from -40°C to 60°C, as well as in environments where humidity and transient pressure are a concern, the Honeywell BW™ Solo is accurate and dependable.

Designed to Use in the Field

Practically designed, workers can easily change out the sensor in the field without the need for any special equipment or exposing the printed circuit board to the environment. It is a simple step of removing the old sensor and replacing it with the new.

Automate, centralize,and streamline with fleet management options.

The Honeywell BW™ Solo, Honeywell SafetySuite Device Configurator software, and the IntelliDox can be used in different ways to boost productivity, compliance, and safety.

Using the docking station for testing, configuration and recordkeeping – fully automated

To use, simply place the Honeywell BW™ Solo into the docking station. The system automatically transfers data and completes any pre-selected actions. These actions include bump reminders and bump tests, modifying set points, updating firmware, or other types of options. The software used for fleet management also automatically sends all peak readings and alarms by USB or Ethernet to your computer.

The IntelliDox docks can also be grouped up to five docks. Each has its own pump, keypad, and LCD screen, but they can be configured to operate in sync or as standalone controls, sharing power, and calibration gas.

The Device Configurator

Device Configurator software is Windows-based and allows the user to see and to transfer detector information and data, manage alarm set points, set up firmware updates, and improve compliance, safety, and productivity.

Expanded access through the Cloud

Opting to use the subscription service of the cloud-based Honeywell SafetySuite Device Manager allows for:

• Complete visibility through a single dashboard for all alarms and compliance of detectors throughout the entire system, including in multiple sites and locations.
• Reporting options customized to your needs
• Notification by text or email of alarms in real-time
• Additional compliance benefits and features
• Single location storage for all data needed in audits, reporting or investigations

 

The ease of Smartphone control and detector management. Through apps in the Honeywell Connected Worker portfolio, the Honeywell BW™ Solo can be controlled through wireless technology.

On the Go Control

Downloading and pairing the Honeywell BW™ Solo with any smartphone allows for full control through the Device Configurator app. This app allows the user to setup, configure, and verify test data from distances of up to six meters away using Bluetooth Low Energy (BLE) technology.

With the app, it is easy to check data, including calibration and bump data, as well as see who performed the calibration, what gas was used, and the readings. In addition, the app can create a certificate and mail it to the required stakeholders, just verify it is available during the launch.

Eliminate Docking Requirements

Using the wireless technology offered with the Honeywell BW™ Solo eliminates the needs for the added equipment and costs of docking stations. The app transmits the data directly to the desktop software, all using BLE.

Enhance Monitoring Ability

The Safety Communicator app by Honeywell also allows data to be shared with monitoring software. This is also a technology that does not require docking, providing real-time information to be accessed by any remote device with an internet connection. Safety managers can easily keep track of workers and safety issues.

Making Safety and Compliance a Reality

 

Control at the Push of a Button

The Honeywell BW™ Solo can be controlled by the Honeywell SafetySuite Device Configurator software, or it can be manually controlled with a simply one-button operation. This makes it easy to use in any workplace, even when wearing gloves, which increases both compliance and safety.

Information at a Glance

The use of Honeywell IntelliFlash™ allows for quick visual confirmation the detector is either in compliance or not in compliance. Activating the IntelliFlash™ provides a green flashing light when the system is in compliance, and a red blinking light if it is not.

Out of compliance can be caused by battery issues, a gas event, or if the detector needs bump testing or calibration.

Loud Auditory Alarms and Visual Signals

If there is an alarm on the Honeywell BW™ Solo, it is loud and visual. With both vibration and auditory alarms, as well as red lights around the detector, even noisy environments become safer.

Making Operation Easy

 

Know the position of detectors and workers

Assigning and pairing detectors with locations or workers allows for immediate understanding of where the detector is located.

Peak Readings over 24 Hours

Offer a rolling 24-hour peak reading measurement; it is possible to find trouble issues before they become problematic. The peak reading is often well below the alarm set point, but it is critical to detect problems early.

Language Capabilities

For use in all areas of the world, the Honeywell BW™ Solo can be configured to provide readings in all major languages.

Part Number: BWS-HL-B

Cutting Edge portable detector for single-gas.

 

Offering a full range of sensor options, easy operation, and convenient service. The next-generation of gas detector to replace the ToxiPro® and the GasAlert Extreme, the Honeywell BW™ Solo offers all the standard options and additional features to: Protect workers Ensure wireless and connected options Increase compliance with ease of use Lower the cost of maintenance and ownership

 

Optimized for hazardous environments

Lightweight and streamlined, the small size of the Honeywell BW™ Solo makes it ideal for workers to use in any location.

Simplification of single-gas detection combined with low cost and long life

Replacing the sensor, a sensor filter, or a battery is easy with the Honeywell BW™ Solo. Just pop open the door on the detector and complete the necessary change, all without the need for special tools or equipment.

Full sensor range for gases of all types

In any type of industry, including production and manufacturing, petrochemical, or in power plants, the Honeywell BW™ Solo offers a sensor solution. This includes the ability to test for:

• Hydrogen sulfide (H₂S)
• Carbon monoxide (CO)
• Phosphine (PH₃)
• Oxygen (O₂)
• Sulfur dioxide (SO₂)
• Hydrogen (H₂)
• Ammonia (NH₃)
• Chlorine (Cl₂)
• Chlorine dioxide (ClO₂)
• Nitrogen oxide (NO)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ozone (O₃)
• Ethylene oxide (ETO)

 

Featuring the 1-Series sensor, this single-gas detector has higher accuracy, lower cost of ownership, and increased safety for workers.

For commonly monitored single gases, the 1-Series sensor provides fast response, a long life cycle, and reliable performance you can count on.

Most fast response gas types available.

Currently, the 1-Series sensor provides rapid responses for the testing of CO, O₂, and H₂S, with increased capacity on the way. The sensor itself has a square design, which allows for more rapid gas diffusion and faster readings. The sensor is also about a third the height of other sensors, allowing a lighter and more streamlined detector design.

Exceptional warranty and sensor life.

Offering a three-year warranty and up to 5-years of sensor life with typical gas exposure, the 1-Series sensor has a low cost of ownership. In addition, decreased downtime and long sensor life make them a practical addition to your fleet.

The 1-Series sensor is developed by City Technology.

City Technology is a Honeywell company and developed both the 40VX and the 40xLL oxygen sensors used in the Honeywell BW detector. With forty plus years of sensor development expertise, this company is known for reliable sensors and quality products.

No more false alarm issues.

The 1-Series sensor provides highly accurate readings in the most demanding types of environments. This includes temperatures of -40°C to 60°C with or without factors such as transient pressure and high humidity levels.

Fast switch-out of the sensor.

Replacing a sensor has never been easier or safer. Simply take out the old sensor and put in the new, no need to expose the printed circuit board or internal components.

Offering the benefit and time saving of centralized data and automation for fleet management.

The Honeywell BW™ Solo is designed to be used with the IntelliDox and the Honeywell SafetySuite Device Configurator software for maximum flexibility and versatility.

The IntelliDox advantage

The IntelliDox dock allows the Honeywell BW™ Solo to simply be put in place for automated transfer of data from test results and the completion of selected actions. These actions can include calibration, bump testing, setting bump reminders, changing alarm set points, or even completing a firmware update.  Through fleet management software and a USB or Ethernet connection, peak readings, alarms, and other data are automatically transferred to a computer.

Need to have options and capacity? The IntelliDox can be grouped up to five docks, each with its own pump, keypad and LCD screen. This allows independent operation while sharing both calibration gas as well as power.

Centralize compliance monitoring with Device Configurator

Device Configurator is Windows-based, which allows this software to operate on any Windows computer. It will enable the user to view, update firmware, set alarm points, and so much more. Boost productivity, compliance, and safety across the organization.

Increased access with cloud-based software

For a greater range of features and increased access to data, choose the Honeywell SafetySuite Device Manager cloud-based subscription. This provides you with:

• An easy to use and see dashboard to immediately verify compliance or know when and where alarms occur.
• Reporting options for your needs.
• Centralized storage of data needed for investigations and audits.
• Real-time notification of alarms by text or email.
• Enhanced compliance features.

 

Increase ease of operation through smartphone detector management. The Honeywell BW™ Solo offers a wireless option that is compatible with the Honeywell Connected Worker portfolio for increased productivity, safety, and compliance.

An app for all tasks.

The Device Configurator app can be used once the Honeywell BW™ Solo is paired with the smartphone. The app provides full control of the detector, including firmware upgrades and detector setup and configuration. Using BLE (Bluetooth Low Energy), these actions can be done at up to 6 meters away, including data verification.

No docking station required.

For any company, the ability to wirelessly share the detector's gas data from the Honeywell BW™ Solo through to the computer using BLE makes it easy to manage the fleet, all without the need for docking stations.

Enhancing worker safety from remote locations.

To see data without the need for the Honeywell BW™ Solo to be docked is critical for worker safety. The use of the Honeywell Safety Communicator app sends data to the Honeywell monitoring software, which allows access from your internet-connected device in real-time from any location.

Compliance you can trust for workers and safety managers.

 

Operation in any location

The Honeywell BW™ Solo can be controlled by the Honeywell SafetySuite Device Configurator software, or it can be manually controlled with one-button operation. This is easy to do even when wearing gloves, which leads to increased use and greater compliance. It also provides measurements for time-weighted average (TWA), short-term exposure limits (STEL), and 24-hour high gas concentration readings.

Options to check for compliance

The Honeywell BW™ Solo allows the option to see the IntelliFlash™ to show the detector is in compliance. Flashing green lights are positive for compliance, showing the detector has been bump tested and is correctly monitoring.

It is also possible to check for noncompliance. This setting will flash red if the detector requires a bump test, needs calibration, has experienced a gas event, or if the battery is low.

Having both options to choose makes it more effective for your specific workplace and procedures.

Visual and auditory alarms

To clearly display a gas event, the Honeywell BW™ Solo will vibrate as well as produce a loud, audible alarm. The detector also has a ring of LED red lights, a clear visual of an alarm in noisy spaces.

Designed to be practical and effective.

 

Tracking detectors and workers

Assigning detector to specific locations or workers makes it easy to locate where the detector is and who is using it in a gas event.

Peak readings over a rolling 24-hours

To determine the highest gas readings over a rolling 24-hour period provides for early detection of problems before a gas event occurs. This helps to prevent alarms and keeps the workplace safer.

Language options in the display

The easy-to-read display screen can be configured to provide information in major languages for use in any location around the world.

Part Number: BWS-V-Y

Optimal Single-Gas Detection With Next-Generation Technology

 

Sensor options combined with a system that is easy to service and to operate in the field. The next-generation of single-gas detection is here with the Honeywell BW™ Solo. Replacing the GasAlert Extreme and the ToxiPro®this sensor offers: Increased worker safety Enhanced compliance New levels of protection Lower cost of purchase and operation

Practical to Use

Small and lightweight, the Honeywell BW™ Solo is convenient, functional, and easy to use in any work environment.

Low Cost, Long Life

The Honeywell BW™ Solo design allows for easy replacement of sensor filters, batteries, and sensors. Just pop off the panel door – no need for special tools.

Common and Exotic Gas Sensors

In power and petrochemical plants, as well as in manufacturing or other industrial environments, the Honeywell BW™ Solo offers the right sensor for the job. Both common and exotic gas sensors are included with the detector, including:

• Hydrogen sulfide (H₂S)
• Carbon monoxide (CO)
• Sulfur dioxide (SO₂)
• Hydrogen (H₂)
• Oxygen (O₂)
• Ozone (O₃)
• Phosphine (PH₃)
• Ammonia (NH₃)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

 

Maximizing Safety With The 1-Series Sensor

The Honeywell BW™ Solo is the first portable, single-gas detector to come with the 1-Series sensor. This is a proven performer in even the most difficult conditions, and with next-generation technology, the 1-Series sensor is the right choice.

Faster Reading and Response

Currently, the 1-Series sensor is available for use with CO, H₂S, and O₂, with additional sensors for other gases soon available. It has a square design, about one-third of the size of other sensors, making it both effective as well as streamlined.

Exceptional Life

With typical exposure to gas, the 1-Series sensor can last up to five years without any need for replacement and downtime for the equipment. It also offers a three-year warranty, providing peace of mind with the purchase.

A Honeywell Company Product

The 1-Series sensor was designed and developed by the Honeywell company, City Technology. With over four decades of sensor manufacturing experience, they are also the company responsible for the 40xLL and the 40XV oxygen sensors used in the Honeywell BW.

Reliable Performance

Tired of nuisance alarms and unreliable readings? These are the thing of the past with the Honeywell BW™ Solo, which is proven in harsh, humid, and transient pressure environments, as well as in temperatures from -40°C to 60°C.

Keep Sensor Downtime Low

Need to change out the sensor? This is a simple, easy, and very quick task - just remove the old sensor and drop in the new, no need to expose the sensor printed circuit board or internal component.

Streamline Your Fleet and Centralize Data Management

Designed to be used with different technologies, the Honeywell BW™ Solo can be used with an IntelliDox docking statio and the Honeywell SafetySuite Device Configurator for maximum efficiency as well as fleet management.

The IntelliDox Advantage

The IntelliDox dock is designed to hold the detector and automatically transfer the data and test results. It can also be configured to perform any desired actions automatically, increasing efficiency. These actions include:

• Bump tests and reminders
• Calibration
• Modification of set points
• Firmware updates

 

Data about peak readings and alarms are transferred to a computer from the IntelliDox by Ethernet or USB connection. Grouping up to five IntelliDox still allows for individual use, while each dock has its own LCD screen, keypad, and pump. Grouped IntelliDox share calibration gas and power for ease of operation.

Centralize Compliance Made Simple

Utilizing Windows-based software, data can be exported and viewed on any Windows computer. The computer can also be used to configure the detector, upgrade firmware, and ensure full compliance across the fleet.

Utilize the Power of the Cloud

Choosing to subscribe to Honeywell SafetySuite Device Manager cloud-based system allows you to:

• Access information from any internet-connected device
• Receive immediate alarm notification via email or text
• Monitor the entire system through easy to navigate dashboards, even with multiple sites
• Obtain the reports you need
• Boost compliance across all workplaces

 

Managing The Detector From Your Smartphone The Honeywell Connected Worker portfolio integrates the Honeywell BW™ Solo, allowing wireless control of the detection for increased compliance, safety, and worker productivity.

 

The Power of the Mobile App

The Device Configurator app puts the control of the Honeywell BW™ Solo right on your smartphone.

The app can be used in the configuration, alarm setup, firmware updates, and the control of the detector from up to 6 meters using Bluetooth Low Energy (BLE) technology.

The app allows you to review bump and calibration data, to see the last gas tested and who ran the test, as well as to see the actual readings. This information can be placed on a certificate and emailed to the necessary stakeholders, all from the app.

Send Data to a Desktop Without IntelliDox

The use of BLE allows the wireless transfer of data from the Honeywell BW™ Solo to a desktop without the need for a docking station. This is an ideal option for a larger fleet, eliminating the need for docking stations.

Worker Safety is First

The Honeywell Safety Communicator app allows access to vital information without the need for docking. This provides gas readings and other vital data to monitoring software in real-time. Safety and fleet managers can access this information from any internet-connected device from any remote location.

Working Towards Full Safety and Compliance Across the Workplace

 

Easy Field Operation

The Honeywell BW™ Solo is designed to work in all types of environments. This includes one-button operation of the detector, eliminating the need to remove safety gloves to complete the test. The Honeywell SafetySuite Device Configurator can also be used to control the detector and set all parameters. It also provides data on short-exposure limit (STEL) and time-weighted average (TWA) as well as the peak gas concentration in the last 24 hours.

Visual Safety or Non-Compliance Confirmation

Are you tired of trying to see if a detector is in compliance or not in compliance? The Honeywell BW™ Solo makes this easy with flashing green lights to indicate bump testing and correct monitoring.

Red flashing lights means the detector is not in compliance, which could indicate a battery replacement is needed or the system needs calibration, a bump test, or these has been a gas event.

Auditory Alarms

The load and audible alarm and vibration of the Honeywell BW™ Solo are coupled with a ring of red LEDs around the detector, making it easy to see if an alarm has been trigged in any environment.

Simplicity and Sophistication for Use and Configuration

 

Know your worker's location

The Honeywell BW™ Solo can be assigned to a specific worker or a location for immediate information on the use of the detector in the event of a gas event.

Peak Reading Data For A Rolling 24-Hours

Peak readings of specific gases that may not reach the alarm threshold are still important to record. The Honeywell BW™ Solo offers a 24-hour rolling peak reading, allowing for early detection of problem areas.

Multiple Language Display

The Honeywell BW™ Solo can be configured to display gas readings in real-time in major languages, including English, Spanish, French, Russian, Korean, Japanese, and many more.

Part Number: BWS-XL-Y

A New Generation of Portable Gas Detection

 

A full selection of sensor options in an easy to service and operate detector. As a replacement for the ToxiPro®and the GasAlert Extreme, the Honeywell BW™ Solo is the next-generation in detectors for safety, compliance, and productivity. Adding this solution to your fleet will provide: Longer use cycles for lower cost Allow workers to connect Increase safety in any environment Increase compliance with an easy to use detector

 

Durable and Compact

Small and streamlined, the Honeywell BW™ Solo is easy to use, helping to ensure compliance in any workplace.

Low Cost, Long Life, Easy Service

Thanks to a practical design, the Honeywell BW™ Solo is easy to work on in the field. Removing a door on the front is all that is needed to change out sensor filters, replace the battery, or change the sensor – without the need for any tools.

Range of Sensor Options

No matter where you may be working, the Honeywell BW™ Solo offers the sensor you need to measure both typical or less common types of hazards. Use this sensor for the detection of:

• Hydrogen sulfide (H₂S)
• Sulfur dioxide (SO₂)
• Hydrogen (H₂)
• Ammonia (NH₃)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ozone (O₃)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

 

It also provides detection for common gases such as Carbon monoxide (CO), Oxygen (O₂), Hydrogen (H₂) and Chlorine (Cl₂).

Getting To Know The 1-Series Sensor

Are you interested in increasing accuracy and lowering the cost of detection while also increasing worker safety? If you are, the 1-Series sensor offers reliability, long duty and life cycle, and a fast response for readings in any type of environment.

Detecting CO, O₂, and H₂S

The square design of the 1-Series sensor allows for fast diffusion of the gas in the sensor, all with a small, square design. More compact than other detectors, it is less than half the size of other sensors on the market.

3-Year Warranty with a 5-Year Sensor Life

Based on typical use, the 1-Series sensor offers up to a 5-year sensor life and the benefit of a full three-year warranty. This helps to extend the duty cycle of the sensors, reducing the cost of ownership while keeping equipment up and running.

Experienced Sensor Development by Honeywell

The 1-Series is designed and manufactured by City Technologies, which is a Honeywell company. City Technologies has over 4 decades of developing top sensors, including the 40xLL long-life and the 40XV oxygen sensors for the Honeywell BW.

Accurate Readings without Unnecessary Alarms

In temperatures from -40°C to 60°C, the 1-Series sensor provides a reliable source of highly accurate readings. It is also an effective detector in environments where transient pressure or high humidity is a problem for other detectors.

Simple Sensor Replacement

The design of the sensor eliminates the need to access the PCB (Printed Circuit Board) during sensor replacement. Just pop it open and switch out the sensor, all without the need for special tools.

Efficient Fleet Management and Centralized Data Collection

As a system, the use of the Honeywell BW™ Solo, IntelliDox, and Honeywell SafetySuite Device Configurator make it easy to manage data from the entire fleet. At the same time, this also allows for greater safety, productivity, and compliance with industry standards.

Automate RecordKeeping, Testing, and Configuration

The use of IntelliDox technology and docking stations makes it easy to automatically transfer and store results from testing as well as complete specific tests and actions. The detector is placed in to dock to:

• Configure and change set points
• Bump test
• Set bump reminders
• Update firmware
• Calibrate the detector

 

With the use of fleet management software, all data, alarms, and peak readings are easily transferred to a company through a USB or Ethernet connection.

The IntelliDox can be used alone or combined with four other docks into a group. Each dock offers its own control of detectors, as well as a state-of-the-art LCD screen, pump, and individual keypad. Grouped docks share power and calibration gas for efficiency and operational ease.

Adding Device Configurator

The Device Configurator uses Windows-based software, allowing easy data transfer, deployment of firmware updates across the fleet, exporting of data as well as configuration of alarm set points from one central location.

Move to the Cloud

For enhanced control and management for the fleet, upgrade to the Honeywell SafetySuite Device Configurator manager that uses the cloud. This upgrade allows you to:

• See all detectors on one screen for immediate identification of alarms, compliance, and gas events.
• Automated text and email messages of any alarms across the system
• Multiple reporting options
• Centralize report storage and retrieval for audits or as needed
• Increased compliance across multiple sites

 

Make compliance easy through smartphone management of the detector. One easy way to boost compliance, safety, and efficiency is to choose the wireless version of the Honeywell BW™ Solo that integrates with the Honeywell Connected Worker portfolio.

 

The Advantages of the Mobile App

The Device Configurator is designed to work on a smartphone that has been paired with the HoneywellBW™ Solo. The app allows for configuration of the detector, development of set points and alarms, and even firmware updates using BLE or Bluetooth Low Energy technology.

Is efficiency and compliance important? If so, the mobile app can be used to check data, see readings, and even find out who performed the calibration of the detector as well as information about the gas reading. This is automatically entered into the system, and a certificate can be mailed to those who require a copy.

No Docking Station Needed

The choice to use BLE technology eliminates the need for an IntelliDox. The data can be transferred wirelessly to a desktop computer for easy fleet management.

Monitoring Made Simple

Adding the Safety Communicator app to the smartphone allows for immediate transfer of data without the need for docking. The data is sent to Honeywell monitoring software, and it is available to managers in real-time through the app. For managers, this makes monitoring worker location and safety an efficient process.

Ensure Compliance Through Ease of Use

 

The Push of a Button

The easier any technology is to use in the field, the greater the levels of compliance. The Honeywell BW™ Solo is easy to operate with the push of a button, even when wearing gloves or protective gear. The single button or the Honeywell SafetySuite Device Configurator software makes it simple to set all parameters, alarms, and set points, as well as read short-term exposure limit, time-weighted average, and highest concentrations over the last 24 hours.

Visible Safety and Compliance

A quick glance is all it takes to ensure the Honeywell BW™ Solo is compliant. The IntelliFlash™ can be activated to flash green when the detector is monitoring accurately and has been bump tested.

Non-compliance results in a blinking red light, letting you know the detector has a low battery, there has been a gas event, or the system needs calibration or a bump test.

Getting Noticed

The use of flashing lights, audible alarms, and vibration makes it easy to notice if there is an issue or any danger in any type of environment.

Designed to be Practical

 

Easy Monitoring

The detectors can be linked to workers or locations, making it easy to find the problem area in a gas event.

Rolling 24-Hour Readings

Rolling 24-hour readings provide information on the peak gas reading, even without an alarm. This gives you the heads up for potential trouble spots in the system.

Worldwide Use

Used in countries around the world, the Honeywell BW™ Solo can display gas readings in all major languages.

Part Number: BWS-HL-Y

State-of-the-art Portable Single-Gas Detection

 

Practical, functional, and offers a complete line of sensor options. Replacing the ToxiPro®and the GasAlert Extreme, the next-generation Honeywell BW™ Solo builds on their proven reliable and practical operational use. The Solo offers: Cost-effective ownership Increased use for compliance Protection and safety for workers Connectivity for data transmission

Comfortable to Use

Small, compact, and lightweight, the Honeywell BW™ Solo is an easy detector to use in any type of environment, including hazardous locations.

Easy Maintenance and Service

In the field or on the go, the Honeywell BW™ Solo is designed to allow quick switching of sensors, sensor filters, or batteries. Just pop the door of the compartment open and make the necessary changes – no tools needed.

Sensor for Exotic and Standard Gases

Designed for use across diverse applications and industries, including power plants and petrochemical facilities, the Honeywell BW™ Solo is able to detect:

• Ammonia (NH₃)
• Carbon monoxide (CO)
• Oxygen (O₂)
• Nitrogen oxide (NO)
• Sulfur dioxide (SO₂)
• Ozone (O₃)
• Hydrogen (H2)
• Hydrogen sulfide (H₂S)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Chlorine dioxide (ClO₂)

 

Featuring The 1-Series Sensor for A New Level of Accuracy, Safety and Lower Costs for Single-Gas Detection

Designed for frequently monitored single-gas use, the 1-Series sensor provides fast, acute performance coupled with a long life, even when used in extreme environments.

When Speed is Critical – Fast CO, H₂S, and O₂ Response

Designed to be streamlined, the square sensor design and the lower height of the sensor makes it easier to work with and use in any space. At 1/3 the height of standard sensors, and with the unique square shape, fast responses and rapid gas diffusion is standard.

Best Warranty and Sensor Life

The 1-Series sensor offers a three-year warranty, and the sensor has a typical life cycle of up to five years, depending on the gas exposure. With increased uptime and lower costs of maintenance, this is an investment in your productivity and safety.

Developed by a Honeywell Company

City Technologies, a Honeywell company,developed the 1-Series sensor specifically for the Honeywell BW™ Solo. They are also the company that designed and manufactured the 40XV and the 40xLL long-life oxygen sensors used in our Honeywell BW detector. With 40 years of experience, these are reliable and proven sensors that are built with the highest quality control.

End Nuisance Alarms

Do your workers have to deal with nuisance alarms with existing sensors? The 1-Series sensor eliminates these nuisance alarms while increasing the accuracy of readings, helping to improve compliance. The sensors are designed to work in harsh environments, including temperatures between -40°C to 60°C with or without humidity and transient pressure factors.

Easy Sensor Replacement

Without the need to take the detector apart, or exposure the printed circuit board, switching out a sensor has never been easier. Just take out the existing sensor and replace it with the new one, no special tools or equipment necessary.

Fleet Management, Automation, and Data Centralization Features Save Time

The Honeywell BW™ Solo is designed to integrate with the IntelliDox and Honeywell SafetySuite Device Configurator software for data transfer and sensor control.

Docking with IntelliDox

The Honeywell IntelliDox is designed for easy docking and automatic transfer of data. In addition, the IntelliDox can also perform a range of different actions, including bump tests, bump reminders, adjust or set points, and firmware upgrades. The fleet management software automatically transfers peak readings, alarms, and other specified data when connected to USB or Ethernet.

Up to five IntelliDox can be grouped, or a single dock can be used in insolation. Each dock has a keypad, pump, LCD screen, and operator control. Grouped docks share calibration gas and power.

Boosting and Centralizing Compliance with Device Configurator

Serving several purposes, the ability to use the Device Configurator Windows-based software to export data from the detector to the computer allows for centralized management and configuration. This includes configuring alarm set points, updating firmware and exporting data from one centralized location.

Add the Cloud

Subscribing to the Honeywell HoneywellSafetySuite Device Manage allows your business to use cloud-based technology for compliance management, productivity, and safety. The advantages include:

• easy tracking and quick identification of compliance status and alarms with multiple detectors used across various sites
• Immediate and real-time text or email messages about alarms
• Reporting options
• Central data storage for easy access for reporting, audits or investigations
• Customized features to boost compliance

 

Manage Detectors from Your Smartphone Adding yet another layer of convenience, the Honeywell BW™ Solo can be used with the Connected Worker portfolio in a wireless version.

Control Through the App

The Device Configurator app allows for easy control of the detector once the Honeywell BW™ Solo is linked to your smartphone. This allows the phone app to configure, establish set alarm points, and manage actions from up to 6 meters away using BLE (Bluetooth Low Energy).

The app can be used to see readings, check calibration or bump data and details, and to have a record of past calibrations and results. The app can also consolidate data and mail a certificate to designated stakeholders, which can be verified at launch.

No Need for Docking Stations

The choice to use the app eliminates the need for the use ofIntelliDox docking stations. Instead, the Honeywell BW™ Solo uses BLE to transmit data to the desktop software. For fleet management, this is a cost-reduction option.

Remote Access from Anywhere

With the Safety Communicator app, data is immediately transferred to the monitoring software developed by Honeywell. This is a real-time transfer without the need for docking the detector, allowing for full access to all detector locations from any connected device, improving worker safety on any job.

Increase Compliance for Workers and Safety Managers

 

Gloves On? No Problem for Operation

Hazardous and difficult environments do not mean risking worker safety. The Honeywell BW™ Solo is controlled with the push of a button, even when wearing gloves. Both the one-button operation option and the use of the Honeywell SafetySuite Device Configurator allow for full configuration of the system in any location. This includes STEL or short-term exposure limits, TWA or time-weighted average measurements as well as peak gas detection data.

Visual Safety

Flashing green lights on the Honeywell BW™ Solo indicate compliance with the detector using the IntelliFlash™ feature. Green means compliance and correct monitoring and bump testing.

Flashing red means non-compliance, which can be a battery issue, gas event, or the need for a bump test.

Loud Alarms

Auditory and vibrating alarms, combined with highly visible red LED around the face of the detector, make it easy to see and hear any alarms.

Ease Of Configuration and Use Anywhere

 

Tracking Made Simple

Assigning detectors to workers or to locations makes tracking and monitoring easy and fast.

Rolling 24-Hour Peak Gas Readings

Having data on peak gas readings under the alarm set point over a rolling 24-hour period is essential to prevent potential problems. The Honeywell BW™ Solo provides this data to help make workplaces safer.

Multi-Language Capability

Used across the globe, the Honeywell BW™ Solo offers gas reading data in all major languages.

Part Number: BWS-G-Y

BW Technologies Replacement Sensor, 4 Series NH3

Part Number: 113588-L3

BW Technologies Single Gas NH3 (50 ppm)

Part Number: CG2A5034

BW Technologies Single Gas NH3 (50 ppm)

Part Number: CG2A5058

BW Technologies Replacement Sensor, 4 Series NH3 Ext

Part Number: 125226-L3

BW Technologies Replacement Label Ammonia (NH3)

Part Number: BWS-A-LABEL

SR-A04 Replacement Ammonia (NH3) Sensor

BW Technologies is a global leader in gas detection solutions. The company offers a wide range of products, accessories, replacement parts, and sensors. The replacement sensors are made with the highest safety standards in mind. The sensors are economical and convenient to install. The replacement ammonia sensor is a plug-in style sensor that easily fits into compatible BW Technologies instruments. To ensure compatibility, please consult your product specification sheet.

BW Technologies Replacement PCB Ammonia (NH3) - Standard

Part Number: BWS-A-PCB1

BW Technologies Replacement PCB Ammonia (NH3) - Wireless

Part Number: BWS1-A-PCB1

BW Technologies Replacement Ammonia (NH3) Sensor, Extended Range

Part Number: SRA204

BW Technologies Replacement PCB Ammonia ext. range (NH3 Ext) - Standard

Part Number: BWS-A2-PCB1