Bump Station

10076721 Altair Pro Single Gas-Detector Alternate Set Point Models - Carbon Monoxide (CO) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

AAA067007 MGT-N Portable Multi Gas Detector, NDIR - CH4 (1-Gas) by Senko

MGT Multi-Gas Detector is designed to protect workers from the most common industrial hazards, including oxygen deficiency, toxic gas poisoning, and explosions. It continuously measures four key gases O2, CO, H2S, and combustible gas (CH4) displaying their concentrations and raising alarms (visual, audible, and vibrating) when dangerous levels are detected. Equipped with a dual CO/H2S sensor, MGT ensures reliable monitoring to safeguard workers in hazardous environments.

KEY FEATURES

• Small dimension & lightweight
• Rechargeable battery
• 30EA of bump tests / events / cal.
• Simultaneously detect 4 different gases
• 25 hours use by one charge for 4-6 hours (P-Type)
• 60 days use by one charge for 4-5 hours (N-Type)
• Configuration via exclusive IR Link
• Easy check & calibration via Docking Station
• Intrinsic safety

MCXL-00HM-Y-CN GasAlertMicroClip XL Detector, Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Yellow Housing, CN Version (China/New Zealand) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXL00HMYCN

MCX3-XUH0-B-AU GasAlertMicroClip X3 3-Gas Detector, Combustible (% LEL, Unfiltered), Oxygen (O2), Hydrogen Sulfide (H2S) - Black Housing, AU version (Australia) by BW Technologies

With that combination of benefits, it's no wonder the GasAlertMicroClip is the world's most popular multi-gas detector, serving as your trusted companion in hazardous environments - keeping you safe without weighing you down.

Plus, it's the first multi-gas detector with a rating of IP68 for unmatched water protection. So you can be confident it will stand up to challenging conditions.

Choose from two detectors, both with extended 18-hour battery runtime, one-button operation and Honeywell's rigorous approach to quality:

GasAlertMicroClip XL: low up-front cost with a two-year warranty.

GasAlertMicroClip X3: three-year warranty and a new oxygen sensor that extends overall operational life expectancy.

Use our unique advanced technology for safety, compliance and productivity.

• Advanced engineering for reliable battery performance
• Reflex Technology™ automated self-test function routinely checks the operating condition of the sensors to increase safety, up-time, and overall worker confidence
• Compact, lightweight and easy to use - no expertise required
• Flashing green IntelliFlash™ light for compliance at a glance

GasAlertMicroClip Standard Features:

• Guaranteed runtime for at least a 12-hour shift - down to -20°C - without compromising LEL detection of hydrogen, acetylene and other combustible gases
• Durable, rechargeable lithium polymer battery - tested to last in extreme environments
• Ergonomic and wearable - doesn't weigh you down
• Real-time gas concentrations shown on LCD
• Bright, wide-angle visual alarm bars
• IP68 rating ensures maximum protection against dust and water
• User-friendly, tamper-proof operation with just one button and intuitive LCD icons
• IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
• Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup
• Compatible with MicroDock II docking station for automated bump tests and calibration
• Compatible with Fleet Manager II software for reporting and fleet management
• Multi-language support in English, French, German, Spanish and Portuguese

New to GasAlertMicroClip X3:

• Five-year life expectancy - plus a three-year warranty
• An all-new oxygen sensor that operates consistently for five years - with no replacement costs for the life of the detector
• Superior cost of ownership - with minimized maintenance and maximized uptime

Part Number: MCX3-XUH0-B-AU

MCXL-00H0-B-UK GasAlertMicroClip XL Detector, Hydrogen Sulfide (H2S) - Black Housing, UK Version (United Kingdom) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXL00H0BUK

1450-401R DS400 Docking Station Includes Demand Flow Regulator by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

10076717 Altair Pro Single-Gas Detector - Chlorine Dioxide (CLO2) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

64024 PS200 2-Gas Personal Safety Monitor - O2/H2S, Non-Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

MCXL-XU00-B-CN GasAlertMicroClip XL Detector, Combustible (% LEL, Unfiltered), Oxygen (O2) - Black Housing, CN version (China/New Zealand) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXL-XU00-B-CN

1888-701 TX400 Test Station for G888 / G999 by GfG

The TS400 and TX400 test stations quickly and automatically perform the required function tests on Microtector II G450 and G460 personal gas detectors. The TX400 can also be used to adjust sensors with test gas. Both test stations are available with an optional charging function for the portable gas detectors. Gas detection devices make a significant contribution to safety, if they are tested every working day.

Before each use of a portable gas detection device, its operational capability must be checked with a function test ("bump test"). We developed the TS400 and TX400 test stations to make this process as simple, quick and cost-effective as possible for our G450 and G460 portable devices, while still complying with the DGUV information 213-056 (T021) and 213-057 (T023). During the functional test, the test station can be operated using the display and buttons of the inserted gas detector.

Function test and adjustment

After a switched-on gas detection device is placed into either of the two test stations, the station will automatically start a function test. Within a maximum of 30 seconds, the alarms and response times are tested, the time and test interval are set, and the data is stored on a microSD card (optional). The device will then give you feedback about the test's success or, if applicable, any errors that occured. The TX400 can also be used for sensor adjustment. Before starting the adjustment, the zero point of the sensors must be set with fresh air. The sensor sensitivity is then readjusted using the appropriate test gas. Depending on the device and the number of sensors, this process will take a maximum of four minutes.

Power supply and charging function (optional)

The test stations are powered by an external 12-volt power supply unit or by a PC (connected via USB). If a gas detection device is placed inside the docking station while switched off, it will automatically start charging. Once it is fully charged, the test station will switch to trickle charge mode to conserve battery power. A 230 volt power supply or car charging adapter is required for the charging function.

Equipment and accessories

A gas extraction fitting (optional) should be used for test gas application with a gas cylinder. Both test stations are equipped with one input and one output each for supplying and withdrawing test gas. The data is documented on a microSD card. A mini-USB port can be used to connect the device to a PC.

Key features at a glance:

• Meets the requirements of DGUV information 213-056 (T021) and 213-057 (T023) as well as DIN EN 60079-29-2
• Suitable for the portable gas detection devices G450 and G460
• Function test, adjustment (TX400 only) and charging function (optional)
• Data storage on microSD card, data transfer to PC
• Optional: carrying case, power supplies (12 / 24 / 230 V), microSD card, data point software, gas sampling fitting
• Mobile use (no PC - 12/24 V power supply)

1450-401 DS400 Docking Station by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

64052Q Auto Bump/Calibration Station by GMI

To complement the Personal Surveyor product line, GMI has developed a compact, robust and easy to use Auto Bump & Calibration Station that can provide full bump and calibration options. Data transfer is facilitated using a USB memory stick with Standalone software that is simple to set up and customize based on end users specifications. Standalone, PC, and ethernet versions are available.

Features

• Simple user interface
• Full bump, calibration and charging options
• Bump/calibration results storage
• Stand-alone, PC or ethernet options
• Robust construction

Standalone

By adding the Auto Bump and Calibration Station to your PS200 package, data can be easily retrieved using specific software in a user friendly time logged format. That gives you the ability to create and print your personalized calibration certificate.

PC

Allows easy configuration (bump test or calibration) of Auto Bump & Calibration Station and allows all results to be automatically stored to a database on the PC. The stored results can be easily viewed and calibration certificates produced. The history of all results can be easily viewed and reports of instruments can be easily compiled.

Ethernet

Same as PC except multiple units can be connected to a network allowing one PC to control and receive data.

1418-024 Micro IV Single Gas Detector with 3-Year Sensor Warranty, Hydrogen Sulfide (H2S), Standard 0 - 100 ppm by GfG

Durable, compact design

Widest Range of sensors

Easy Operation

Up to six months of battery life

Clip-on attachment

Optional motorized pump

Large graphic display

Audible, vibrating and visual alarms

Lifetime warranty

DS220 docking station

Features

• Highly configurable smart sensor design
• Wide range of sensors including O₂, H₂S, CO, NH₃, SO₂, CL₂, CLO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂, THT and more!
• Full 3-year warranty on O₂, CO and H₂S sensors
• Optional sample draw pump
• Large display with real-time readout
• Event / Datalogging standard
• Programmable ceiling (3), STEL & TWA alarms
• Vibrating Alarm standard
• AutoCal® automatic calibration
• Optional docking station

Standard Accessories

• Micro IV detector
• Specified Sensor
• Alkaline Battery
• Rubber Boot
• Manual

1418-027 Micro IV Single Gas Detector with 3-Year Sensor Warranty, Carbon Monoxide (CO), Standard 0 - 300 ppm by GfG

Durable, compact design

Widest Range of sensors

Easy Operation

Up to six months of battery life

Clip-on attachment

Optional motorized pump

Large graphic display

Audible, vibrating and visual alarms

Lifetime warranty

DS220 docking station

Features

• Highly configurable smart sensor design
• Wide range of sensors including O₂, H₂S, CO, NH₃, SO₂, CL₂, CLO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂, THT and more!
• Full 3-year warranty on O₂, CO and H₂S sensors
• Optional sample draw pump
• Large display with real-time readout
• Event / Datalogging standard
• Programmable ceiling (3), STEL & TWA alarms
• Vibrating Alarm standard
• AutoCal® automatic calibration
• Optional docking station

Standard Accessories

• Micro IV detector
• Specified Sensor
• Alkaline Battery
• Rubber Boot
• Manual

1418-024K Micro IV Value Kit with 3-Years Sensor Warranty, Hydrogen Sulfide (H2S), Standard 0 - 100 ppm by GfG

Durable, compact design

Widest Range of sensors

Easy Operation

Up to six months of battery life

Clip-on attachment

Optional motorized pump

Large graphic display

Audible, vibrating and visual alarms

Lifetime warranty

DS220 docking station

Features

• Highly configurable smart sensor design
• Wide range of sensors including O₂, H₂S, CO, NH₃, SO₂, CL₂, CLO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂, THT and more!
• Full 3-year warranty on O₂, CO and H₂S sensors
• Optional sample draw pump
• Large display with real-time readout
• Event / Datalogging standard
• Programmable ceiling (3), STEL & TWA alarms
• Vibrating Alarm standard
• AutoCal® automatic calibration
• Optional docking station

Value Kit Configuration

• All standard accessories: Micro IV detector, Specified Sensor, Alkaline Battery, Rubber Boot, Manual
• Calibration Adapter
• Calibration Gas
• Fixed Flow Regulator
• ABS Carrying Case

1450-402R DS400 Docking Station - Instrument & Pump Includes Demand Flow Regulator by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

10092522 Altair Single-Gas Detector - Carbon Monoxide (CO) by MSA

The MSA Altair Maintenance-Free Single-Gas Detector comes is available in variety of gas detection models including oxygen, carbon monoxide, and hydrogen sulfide. The unit is designed to notify users of gas monitoring with visual alarms of ultra-bright LED lights (which remain visibly noticeable when stored in pockets) and a screen display, distinct audible alarms of over 95 decibels, and vibrating alarms. The triple alarm system will ensure that users and those nearby are appropriately alerted to gas situations in the environment. Most notably, the alarm system is designed to alert users regardless of hearing or visual impairment.

Altair Maintenance-Free Single-Gas Detector features

Worksites interested in assessing alarm conditions and history will find the automatic internal record keeping of the device to be useful. Using MSA InfraRed communication technology, the Altair Maintenance-Free Single-Gas Detector automatically stores the last 25 alarm events. The InfraRed communication adapter allows users to adjust settings and assess alarm conditions.

Easy to use

The unit s ease of use is integral when working in potentially dangerous conditions. These low maintenance unit s are key features of the products advanced design. Long-life lithium batteries typically perform for two years or more, and are designed to outlast a two-minute alarm mode per day. This type of battery efficiency places the Altair Maintenance-Free Single-Gas Detector well above its closest competitors in longevity.

The unit allows for easy bump checks by pressing Gas Test. Once tested, the unit displays a checkmark on the screen for 24 hours. The detectors also offer built-in calibrations, as required for some worksites. For other gas response tests and bump checks, the Altair Maintenance-Free Single-Gas Detector is compatible with Altair Quick-Check Stations. These stations are another maintenance free way to ensure the quality and reliability of the industry s leading gas detection devices.

Durability

Exceeding industry standards is the norm for MSA, and those in dangerous work settings can rest assured that The Safety Company has provided the very best in gas detection technology.

1418-111K Micro IV Value Kit with 3-Years Sensor Warranty, Hydrogen Sulfide (H2S), 0 - 500 ppm by GfG

Durable, compact design

Widest Range of sensors

Easy Operation

Up to six months of battery life

Clip-on attachment

Optional motorized pump

Large graphic display

Audible, vibrating and visual alarms

Lifetime warranty

DS220 docking station

Features

• Highly configurable smart sensor design
• Wide range of sensors including O₂, H₂S, CO, NH₃, SO₂, CL₂, CLO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂, THT and more!
• Full 3-year warranty on O₂, CO and H₂S sensors
• Optional sample draw pump
• Large display with real-time readout
• Event / Datalogging standard
• Programmable ceiling (3), STEL & TWA alarms
• Vibrating Alarm standard
• AutoCal® automatic calibration
• Optional docking station

Value Kit Configuration

• All standard accessories: Micro IV detector, Specified Sensor, Alkaline Battery, Rubber Boot, Manual
• Calibration Adapter
• Calibration Gas
• Fixed Flow Regulator
• ABS Carrying Case

10071336 Altair Single-Gas Detector Alternate Set Point Models - Carbon Monoxide (CO) by MSA

The MSA Altair Maintenance-Free Single-Gas Detector comes is available in variety of gas detection models including oxygen, carbon monoxide, and hydrogen sulfide. The unit is designed to notify users of gas monitoring with visual alarms of ultra-bright LED lights (which remain visibly noticeable when stored in pockets) and a screen display, distinct audible alarms of over 95 decibels, and vibrating alarms. The triple alarm system will ensure that users and those nearby are appropriately alerted to gas situations in the environment. Most notably, the alarm system is designed to alert users regardless of hearing or visual impairment.

Altair Maintenance-Free Single-Gas Detector features

Worksites interested in assessing alarm conditions and history will find the automatic internal record keeping of the device to be useful. Using MSA InfraRed communication technology, the Altair Maintenance-Free Single-Gas Detector automatically stores the last 25 alarm events. The InfraRed communication adapter allows users to adjust settings and assess alarm conditions.

Easy to use

The unit s ease of use is integral when working in potentially dangerous conditions. These low maintenance unit s are key features of the products advanced design. Long-life lithium batteries typically perform for two years or more, and are designed to outlast a two-minute alarm mode per day. This type of battery efficiency places the Altair Maintenance-Free Single-Gas Detector well above its closest competitors in longevity.

The unit allows for easy bump checks by pressing Gas Test. Once tested, the unit displays a checkmark on the screen for 24 hours. The detectors also offer built-in calibrations, as required for some worksites. For other gas response tests and bump checks, the Altair Maintenance-Free Single-Gas Detector is compatible with Altair Quick-Check Stations. These stations are another maintenance free way to ensure the quality and reliability of the industry s leading gas detection devices.

Durability

Exceeding industry standards is the norm for MSA, and those in dangerous work settings can rest assured that The Safety Company has provided the very best in gas detection technology.

1450-402 DS400 Docking Station - Instrument & Pump by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates