Multimeter

WD-20250-54 Industrial Digital Multimeter, TRMS, with NIST-Traceable Calibration by Digi-Sense

Get quality instruments that deliver consistent, reliable measurements without depleting your budget. These durable, handheld multimeters are an economical alternative to higher-priced instruments on the market today.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Autoranging on select models, automatically selects the optimal measuring range for maximum resolution
• Stay safe and prevent damage with overload protection
• Increased durability with double-molded plastic housing

Three-in-One Digital Multimeter (20250-52)

• Three practical instruments in one: multimeter, noncontact voltage detector, and flashlight
• Permanently attached test leads so they don't get lost
• Diode check and continuity test included to check accuracy

Compact Digital Multimeters (20250-50, -51)

• CAT III-600 V designation for safety
• Available in manual ranging version
• Bright backlight display has 1.1" tall digits
• Model 20250-50 offers dedicated battery test function to check the quality of your 9 V and 1.5 V batteries

Industrial Digital Multimeters (20250-53, -54)

• CAT III-600 V and CAT III-1000 V ratings for safety
• IP67 rating for dustproof and waterproof protection
• Flashing red LED alerts you to presence of live voltage
• Model 20250-54 has True RMS for improved reading accuracy and an analog bar graph for viewing trends

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads (models 20250-50, -51, -52), carrying case (models 20250-50, -51) batteries, and NIST-traceable calibration report with data supplied by InnoCal.

50352 SP-710 Water Multimeter (Pyxis) by AquaPhoenix

pH, Conductivity, ORP, PTSA, Temperature, Free and Total Chlorine

The Pyxis SP-710 is a handheld multimeter unit capable of measuring up to 6 key water treatment parameters simultaneously. SP-710 offers pH, Conductivity, PTSA, Temperature, ORP and a Free/Total Chlorine Colorimeter uniquely designed as a multimeter for cooling water applications.

The unit offers a Bluetooth enabled and fully potted, battery powered pH/ORP module, eliminating water and KCl contamination to the unit processor. The new module design offers wireless communication to the base SP710 unit and can also be viewed via the uPyxis APP for smartphone and/or our full scale SP-910 Colorimeter.

50316 SP-710B Water Multimeter (Pyxis) by AquaPhoenix

The Pyxis SP-710B handheld multimeter measures six key water treatment parameters simultaneously: pH, conductivity, PTSA, fluorescein, ORP, and temperature. Featuring simple, one-handed operation, the multimeter leverages Pyxis proprietary technology combining electrochemical and optical measurements in a cuvette-less platform.

With the SP-710B, you can view results in under a minute for all key parameters for a typical water treatment application such as cooling tower analysis. The multimeter logs a complete measurement history, which you can transfer via Bluetooth to your smart phone or PC for statistical analysis.

Custom product names and tracer/product ratios can be configured via Bluetooth-enabled devices.

For highest accuracy, the PTSA measurement uses our proprietary signal processing algorithms to compensate for sample color and turbidity conditions, which would otherwise cause erroneous readings.

PTSA/Fluorescein: 0~300 ppb, ±1 ppb or 1% precision 0~1,000.0 ppb, ±0.6 ppb
Conductivity: 1~15,000 uS/cm with ATC ±1% or ±1 uS/cm precision
pH: 0~14 with ATC, ±0.01 pH unit precision
ORP: ±1500mV, ±1mV precision
Temperature: 0~70 (32~160)

50353 SP-600 Water Multimeter (Pyxis) by AquaPhoenix

pH/ORP/Conductivity/TDS/Temperature/Free & Total DPD Chlorine

The Pyxis SP-600 is a unique handheld multimeter specifically designed to provide added value and ease of use to the Industrial and Municipal Water market users. This military grade device is capable of measuring up to 5 key water parameters simultaneously and offers colorimetric Free & Total DPD Chlorine. The SP-600 is fully waterproof and industrialized. Pyxis has integrated a fully molded screen to ensure a water-proof seal under a pressurized manufacturing environment. The device itself also contains an integrated humidity sensor to ensure a water-free electronic environment.

The simplicity of the one-handed operation is empowered by the Pyxis Inc. proprietary technology that combines electrochemical and optical measurements in a cuvette-less platform. The SP-600 platform offers Bluetooth connectivity between the pH/ORP module and base unit and allows wireless data upload via the uPyxis APP.

Conductivity: 1~200,000 μS/cm
pH: 0~14
ORP: ±1500mV
F/T Chlorine: 0.02-2.2 ppm
Temp: 0~70 (32~160°F)

WD-20250-52 Three-in-One Digital Multimeter with NIST-Traceable Calibration by Digi-Sense

Get quality instruments that deliver consistent, reliable measurements without depleting your budget. These durable, handheld multimeters are an economical alternative to higher-priced instruments on the market today.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Autoranging on select models, automatically selects the optimal measuring range for maximum resolution
• Stay safe and prevent damage with overload protection
• Increased durability with double-molded plastic housing

Three-in-One Digital Multimeter (20250-52)

• Three practical instruments in one: multimeter, noncontact voltage detector, and flashlight
• Permanently attached test leads so they don't get lost
• Diode check and continuity test included to check accuracy

Compact Digital Multimeters (20250-50, -51)

• CAT III-600 V designation for safety
• Available in manual ranging version
• Bright backlight display has 1.1" tall digits
• Model 20250-50 offers dedicated battery test function to check the quality of your 9 V and 1.5 V batteries

Industrial Digital Multimeters (20250-53, -54)

• CAT III-600 V and CAT III-1000 V ratings for safety
• IP67 rating for dustproof and waterproof protection
• Flashing red LED alerts you to presence of live voltage
• Model 20250-54 has True RMS for improved reading accuracy and an analog bar graph for viewing trends

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads (models 20250-50, -51, -52), carrying case (models 20250-50, -51) batteries, and NIST-traceable calibration report with data supplied by InnoCal.

20250-64 Heavy-Duty Industrial Digital Multimeter with Bluetooth® Connectivity by Digi-Sense

Using our free Digi-Sense D/S Meter app, this heavy-duty industrial digital multimeter with Bluetooth® technology allows you to transmit data directly to your Android or iOS device. Now you can view data at a safe distance from dangerous equipment or hazardous locations and even use your smart device as a real-time secondary display for checking measurements, eliminating the need to write down readings on paper. The results are automatically stored in the app with a date-and-time stamp and can be saved as a CSV file and emailed for future reference, manipulation, or analysis to help determine trends and conditions over a long period of time. Use the app to attach photos and notes to the records creating a clear reference point for your work - ideal for record keeping at large sites.

The handheld digital multimeter measures AC/DC voltage, AC/DC current, resistance, frequency, capacitance, and continuity. Special functions include auto ranging, data Hold, Max/Min readings, diode test, audible continuity check, relative mode, duty cycle, low-battery indication, and auto power-off. The meter also offers True RMS for more accurate current readings, temperature measurement with a type K thermocouple, and analog bar graph for viewing trends.

Key Features

• Get the most out of your data with our user-friendly mobile app
• Unlimited data storage based on smart device capacity
• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Rugged double-molded housing provides increased durability
• Bright, large backlit 4000-count LCD permits viewing in low-light conditions
• Tilt stand offers easy hands-free viewing
• IP67 waterproof rated
• CAT IV-600 V, CAT III-1000 V safety rating

Includes

Test leads, type K thermocouple probe with mini connector, carrying case, 9 V battery, and NIST-traceable calibration.

20250-66 Digital Multimeter with Thermal Imager and Bluetooth® Connectivity by Digi-Sense

Using our free Digi-Sense D/S T-View app, this True RMS digital multimeter with Bluetooth® technology allows you to transmit data directly to your Android or iOS device. Now you can view data at a safe distance from dangerous equipment or hazardous locations and even use your smart device as a real-time secondary display for checking measurements, eliminating the need to write down readings on paper. The results are automatically stored in the app with a date-and-time stamp and can be saved as a CSV file and emailed for future reference, manipulation, or analysis to help determine trends and conditions over a long period of time. Use the app to attach photos and notes to the records creating a clear reference point for your work - ideal for record keeping at large sites. Note, only electrical data can be transmitted to mobile device.

The 80 x 80 (6400 pixels) thermal imager with Max, Min and Center crosshair targeting helps you pinpoint hot spots quickly and more efficiently without contact. Thermal imager has a temperature range of -4 to 500°F (-20 to 260°C) with ±5.4°F (±3°C) or ±3% reading accuracy.

The compact, handheld digital multimeter provides fast A/D converting sampling time (10 times/second), high accuracy with datalogging and trend capture features. It measures AC, AC+DC TRMS voltage, DC voltage, AC, AC+DC TRMS current, DC current, flexible coil current, resistance, frequency, and capacitance. Special functions include peak capture, auto ranging, data Hold, Max/Min/average readings with time stamp, diode test, continuity check, relative mode, duty cycle, low-battery indication, and auto power-off. Meter accepts test leads (included), type K temperature probe (included), and flexible coil.

Key Features

• Get the most out of your data with our user-friendly mobile app
• Unlimited data storage based on smart device capacity
• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Built-in thermal imager quickly identifies hot spots
• Rugged double-molded housing provides increased durability
• Select from four color palettes: iron, rainbow, grey, or grey inverted
• View measurements clearly on 6000-count TFT color LCD
• Tilt stand offers easy hands-free viewing
• IP65 waterproof rated
• CAT IV-600 V, CAT III-1000 V safety rating

Includes

Test leads, type K temperature probe, carrying case, AC power adapter/charger, rechargeable Li-ion battery, and NIST-traceable calibration.

0590 7601 760-1 Digital Multimeter with Capacitance & Auto Setup by Testo

Testo's exclusive auto-test setup enables the user to simply turn on the unit, connect the leads, and begin measuring. The testo 760 Digital Multimeter detects the lead connection and prevents switching from V to A or A to V if leads are not in proper socket. This prevents accidentally blowing the meter's fuse because of incorrect connections. The function and range settings are always correct because the measurement parameters are detected and set automatically. Three easy-to-read buttons replace the traditional rotary switch when selecting manual test functions.

Additional benefits:

• APO (Auto Power Off) saves battery life
• Overmold housing makes it rugged
• Large, backlit, dual readout display with analog bar graph is easy-to-read
• Lead holder conveniently molded into housing for easy storing

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Auto test-setup based upon lead connection prevents blown fuses in the meter
• Meter prevents switching from V to A or A to V if leads are not in the proper socket
• Meter automatically detects testing in-process and selects correct meter configuration to save time and optimize accuracy
• 3 buttons that illuminate for easy and clear selection of test functions
• Low Pass Filter and Duty Cycle standard
• Measure up to 400 A with optional clamp probe adapter
• Heavy Duty - Drop and water resistant for tough conditions

275 Clamp-On Tester with True RMS Digital Multimeter and 11,000 Count Display by Test Products International

Clamp-On Tester with True RMS Digital Multimeter & 11,000 Count Display. The new TPI 275 with slim jaw and body is ideal for cramped work areas and crowded electrical panels.

The slim design 275 is a hand-held, autoranging clamp-on DMM. Extra large numerals, min/max, capacitance, DC microamps and duty cycle are just a few of the features of the 275. An affordable choice, the 275 offers measurements in all basic electrical functions with additional advanced features like non-contact voltage.

Features:

• True RMS
• 11,000 count display
• Up to 400 amps AC/DC
• Auto & Manual Ranging
• Data Hold
• Low Battery Indicator
• Over Range Indication ("OL")
• Peak Hold
• Min/Max
• Relative Mode
• Hi Voltage Indicator(>30V AC/DC)
• Non-contact voltage detection
• Auto Power Off after 30 minutes
• Separate Battery Compartment
• Low Ohm Range (110Ω)
• Amps AC Resolution: 0.01A
• VDC/VAC Resolution: 0.01mV
• DCiA measurement (0.01μA resolution)
• Temperature measurement

Applications:

• Measure DC amperage of motor drive units
• Measure flame safety control current
• Test run and start capacitors and motors
• Measure motor run current and capture peak motor start up amperage
• Measure heat anticipator current
• Determine thermocouple voltage
• Test line and control voltages
• Measure heating element resistance
• Measure air temperature in ducts
• Test for the presence of voltage in circuits without contacting the circuit
• Measure temperature differential using relative mode

The 275 comes complete with the following accessories:

• Carrying Pouch
• Test Lead Set
• Temperature Probe
• Instruction Manual
• Battery & Fuse

0590 7602 760-2 Digital Multimeter with TRMS, Capacitance, LPF, Auto Setup, Duty Cycle & Temperature by Testo

Testo's exclusive auto-test setup enables the user to simply turn on the unit, connect the leads, and begin measuring. The testo 760 Digital Multimeter detects the lead connection and prevents switching from V to A or A to V if leads are not in proper socket. This prevents accidentally blowing the meter's fuse because of incorrect connections. The function and range settings are always correct because the measurement parameters are detected and set automatically. Three easy-to-read buttons replace the traditional rotary switch when selecting manual test functions.

Additional benefits:

• APO (Auto Power Off) saves battery life
• Overmold housing makes it rugged
• Large, backlit, dual readout display with analog bar graph is easy-to-read
• Lead holder conveniently molded into housing for easy storing

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Auto test-setup based upon lead connection prevents blown fuses in the meter
• Meter prevents switching from V to A or A to V if leads are not in the proper socket
• Meter automatically detects testing in-process and selects correct meter configuration to save time and optimize accuracy
• 3 buttons that illuminate for easy and clear selection of test functions
• Low Pass Filter and Duty Cycle standard
• Measure up to 400 A with optional clamp probe adapter
• Heavy Duty - Drop and water resistant for tough conditions

0590 7603 760-3 1000V Digital Multimeter with TRMS, Capacitance, LPF, Auto Setup, Duty Cycle & Temperature by Testo

Testo's exclusive auto-test setup enables the user to simply turn on the unit, connect the leads, and begin measuring. The testo 760 Digital Multimeter detects the lead connection and prevents switching from V to A or A to V if leads are not in proper socket. This prevents accidentally blowing the meter's fuse because of incorrect connections. The function and range settings are always correct because the measurement parameters are detected and set automatically. Three easy-to-read buttons replace the traditional rotary switch when selecting manual test functions.

Additional benefits:

• APO (Auto Power Off) saves battery life
• Overmold housing makes it rugged
• Large, backlit, dual readout display with analog bar graph is easy-to-read
• Lead holder conveniently molded into housing for easy storing

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Auto test-setup based upon lead connection prevents blown fuses in the meter
• Meter prevents switching from V to A or A to V if leads are not in the proper socket
• Meter automatically detects testing in-process and selects correct meter configuration to save time and optimize accuracy
• 3 buttons that illuminate for easy and clear selection of test functions
• Low Pass Filter and Duty Cycle standard
• Measure up to 400 A with optional clamp probe adapter
• Heavy Duty - Drop and water resistant for tough conditions

SP-710 Water Multimeter, PTSA/pH/ORP/Conductivity/Temp/Free/Total Chlorine by Quantrol

The Pyxis SP-710 and SP-710B are handheld multimeter units capable of measuring up to 6 key water treatment parameters simultaneously. SP-710 offers pH, Conductivity, PTSA, Temperature, ORP and a Free/Total Chlorine Colorimeter uniquely designed as a multimeter for cooling water applications. The SP-710B offers pH, Conductivity, PTSA, Temperature, ORP and Fluorescein for boiler water applications. Both units offer a Bluetooth enabled and fully potted, battery powered pH/ORP module, eliminating water and KCl contamination to the unit processor. The new module design offers wireless communication to the base SP710/B unit and can also be viewed via the uPyxis APP for smartphone and/or our full scale SP-910 Colorimeter.

The SP710/B is fully waterproof and industrialized and available with an optional body case bump guard with bet clip for ease of access and protection. Pyxis has integrated a fully molded screen to ensure a water proof seal under a pressurized manufacturing environment. The device itself also contains an integrated humidity sensor to ensure a water-free electronic environment.

The simplicity of the one-handed operation is empowered by the Pyxis Inc. proprietary technology that combines electrochemical and optical measurements in a cuvette-less platform. This unique technology simultaneously measures and compensates for Color and Turbidity contamination of the water sample during fluorescence testing, ensuring precise measurement capability +/1ppb resolution, unmatched in the water treatment market.

In less than one minute, results for all key parameters for a typical traced cooling and boiler water treatment applications can be determined. The SP-710/B stores the history for all measurements which can then be transferred via Bluetooth to smartphones or computers for statistical analysis via the uPyxis APP. The SP-710/B can also be used to wirelessly diagnose and calibrate the Pyxis ST-500 and ST-525 inline PTSA/Fluorescein probes, dramatically reducing service time in the field associated with tracer probe calibration.

Features

• Breakthrough technology combines the following in a single rugged one-handed meter. SP-710=PTSA / Conductivity / pH / ORP / Temperature / Free & Total Chlorine Colorimeter. SP-710B=PTSA / Conductivity / pH / ORP / Temperature / Fluorescein
• Waterproof Bluetooth Enabled potted battery powered pH/ORP Module
• pH/ORP Battery Module Added Wireless Communication Capable uPyxis APP & SP-910
• Intelligent sensor aging and/or humidity detection capability.
• Record up to 8G historical data with a calendar time mark and options to set up sample location information
• Long battery life - 10,000+ readings
• Auto Compensation for Color & Turbidity Contamination = Precise Measurement
• Brightness Adjustable Color Screen with Parameter Locking-in Function
• Wireless Diagnosis & Calibration of Pyxis ST-500 (PTSA) & ST-525 (Fluorescein) probes
• Optional Body Pump Guard w/Belt Clip

Typical Applications

Traced water treatment for industrial / commercial cooling towers and boilers.

LEV015-53-22003 HQ2200 Portable Multi-Meter by AquaPhoenix

• Performing a successful calibration has never been so simple
• Deliver your daily activity in just a few clicks
• Sensors designed for every application
• Peace of mind: Hach service and support will be there for you

Industry: Aquaculture, Chemical, Clinical/Medical Lab, Drinking Water, Fertigation, Food & Beverage, Oil & Gas, Petroleum, Storm Water, Waste Water, Hospitality, Agriculture

WD-20250-50 Compact Digital Multimeter, Manual-Ranging with NIST-Traceable Calibration by Digi-Sense

Get quality instruments that deliver consistent, reliable measurements without depleting your budget. These durable, handheld multimeters are an economical alternative to higher-priced instruments on the market today.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Autoranging on select models, automatically selects the optimal measuring range for maximum resolution
• Stay safe and prevent damage with overload protection
• Increased durability with double-molded plastic housing

Three-in-One Digital Multimeter (20250-52)

• Three practical instruments in one: multimeter, noncontact voltage detector, and flashlight
• Permanently attached test leads so they don't get lost
• Diode check and continuity test included to check accuracy

Compact Digital Multimeters (20250-50, -51)

• CAT III-600 V designation for safety
• Available in manual ranging version
• Bright backlight display has 1.1" tall digits
• Model 20250-50 offers dedicated battery test function to check the quality of your 9 V and 1.5 V batteries

Industrial Digital Multimeters (20250-53, -54)

• CAT III-600 V and CAT III-1000 V ratings for safety
• IP67 rating for dustproof and waterproof protection
• Flashing red LED alerts you to presence of live voltage
• Model 20250-54 has True RMS for improved reading accuracy and an analog bar graph for viewing trends

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads (models 20250-50, -51, -52), carrying case (models 20250-50, -51) batteries, and NIST-traceable calibration report with data supplied by InnoCal.

WD-20250-51 Compact Digital Multimeter, Auto-Ranging with NIST-Traceable Calibration by Digi-Sense

Get quality instruments that deliver consistent, reliable measurements without depleting your budget. These durable, handheld multimeters are an economical alternative to higher-priced instruments on the market today.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Autoranging on select models, automatically selects the optimal measuring range for maximum resolution
• Stay safe and prevent damage with overload protection
• Increased durability with double-molded plastic housing

Three-in-One Digital Multimeter (20250-52)

• Three practical instruments in one: multimeter, noncontact voltage detector, and flashlight
• Permanently attached test leads so they don't get lost
• Diode check and continuity test included to check accuracy

Compact Digital Multimeters (20250-50, -51)

• CAT III-600 V designation for safety
• Available in manual ranging version
• Bright backlight display has 1.1" tall digits
• Model 20250-50 offers dedicated battery test function to check the quality of your 9 V and 1.5 V batteries

Industrial Digital Multimeters (20250-53, -54)

• CAT III-600 V and CAT III-1000 V ratings for safety
• IP67 rating for dustproof and waterproof protection
• Flashing red LED alerts you to presence of live voltage
• Model 20250-54 has True RMS for improved reading accuracy and an analog bar graph for viewing trends

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads (models 20250-50, -51, -52), carrying case (models 20250-50, -51) batteries, and NIST-traceable calibration report with data supplied by InnoCal.

WD-20250-53 Industrial Digital Multimeter, IP67, with NIST-Traceable Calibration by Digi-Sense

Get quality instruments that deliver consistent, reliable measurements without depleting your budget. These durable, handheld multimeters are an economical alternative to higher-priced instruments on the market today.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Autoranging on select models, automatically selects the optimal measuring range for maximum resolution
• Stay safe and prevent damage with overload protection
• Increased durability with double-molded plastic housing

Three-in-One Digital Multimeter (20250-52)

• Three practical instruments in one: multimeter, noncontact voltage detector, and flashlight
• Permanently attached test leads so they don't get lost
• Diode check and continuity test included to check accuracy

Compact Digital Multimeters (20250-50, -51)

• CAT III-600 V designation for safety
• Available in manual ranging version
• Bright backlight display has 1.1" tall digits
• Model 20250-50 offers dedicated battery test function to check the quality of your 9 V and 1.5 V batteries

Industrial Digital Multimeters (20250-53, -54)

• CAT III-600 V and CAT III-1000 V ratings for safety
• IP67 rating for dustproof and waterproof protection
• Flashing red LED alerts you to presence of live voltage
• Model 20250-54 has True RMS for improved reading accuracy and an analog bar graph for viewing trends

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads (models 20250-50, -51, -52), carrying case (models 20250-50, -51) batteries, and NIST-traceable calibration report with data supplied by InnoCal.

WD-17090-00 InnoCal NIST-Traceable Calibration, Multimeter, Handheld, 45-digit by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

Calibrations on 4.5 digit handheld multimeters are performed using high-accuracy multi-function calibrators and standards-grade reference multimeters per manufacturer's recommended procedures. Measurements can be taken up to 40,000 Volts, 1000 Amps, 10 Tera-Ohms, 110 Mega-Farads, and 1.1 Giga-Hertz.

Key Features

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate
• Calibration service for a handheld multimeter, 4.5-digit

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.

0590 0002 Thermocouple Adapter Type K for 760-2/-3 by Testo

Using the digital multimeter, it is also possible to measure temperatures in addition to electrical parameters. This adapter is used to attach type K thermocouple temperature probes to your digital multimeter.

Simply insert the adapter into the digital multimeter and attach a type K thermocouple temperature probe onto the adapter. Please note that temperatures can only be measured in the range between -20 and +500°C.

The adapter enables accurate temperature measurement, because it has ambient temperature compensation.

• For attaching type K thermocouple temperature probes
• Measuring range -20 to +500°C

Includes:

Adapter for type K thermocouples, including lithium battery CR 2032.

0590 0001 Magnetic Hanger by Testo

Use the magnetic suspension system for quick attachment of digital multimeters to metal surfaces, for example on heating systems or switching cabinets. Simply thread the suspension system through on the rear of the measuring instrument. Thanks to the magnet, digital multimeter and suspension system adhere to the equipment - which means you have both hands free for your measurement.

• Fast attachment of digital multimeters, e.g. onto switching cabinets
• Both hands free for measurement thanks to the magnetic suspension system

Includes:

Magnetic suspension system.

0590 0003 Current Clamp Adapter for 760-2/-3 by Testo

You can easily manage even in tight spots with this clamp meter adapter! The movable pincer arm can be fully retracted, so that you can for instance grab tightly packed cables in switching cabinets as if you were using a hook.

The clamp meter adapter for non-contact current measurement makes direct / alternating current measurement up to 400 A AC/DC possible. You can attach the clamp meter adapter to a suitable digital multimeter made by Testo or to other makes of digital multimeter which have a resolution in the mV range.

• Fully retractable pincer arm - ideal for measurements in tight places
• Direct / alternating current measurement up to 400 A AC/DC possible
• Display of 1 mV per A
• Overvoltage category CAT IV 600 V

Includes:

Clamp meter adapter for non-contact current measurement, including three AAA batteries.

HQ40D53000000 HQ40D Dual-Input, pH/Cond/ORP/DO/ISE Meter by AquaPhoenix

Multiparameter: Plug-and-Play any Two Intellical Probes!

Designed for your water quality applications measuring pH, Conductivity, TDS, Salinity, Dissolved Oxygen (DO), ORP and ISE, the Hach HQ40D portable multi meter is a two channels advanced handheld digital meter that takes the guesswork out of measurements. The Hach HQD digital multimeter combines reliability, flexibility and ease of use. The HQD portable meters connect with a wide range of Intellical smart electrodes addressing different parameters, sample types and operating environment for water quality, environmental and treatment process purposes. The Intellical probe automatically recognize the testing parameter, store the calibration history, and method settings to minimize errors and setup time. In their Rugged outdoor version the Intellical sensors are nearly indestructible and available with multiple cable lengths.

• Rugged multi meter for outstanding and flexible field water testing.
• Intuitive user interface for simple operation, reliable and accurate results
• Trust your measurements - Intellical™ smart probes store all calibrations in the probe
• Easy to Use in the Field
• Designed for demanding field operating conditions

100 EZ One Button Operation DMM by Test Products International

The new TPI 100 automatically switches between AC and DC Voltage as well as resistance measurements. No more guessing what range to switch your meter to. The TPI 100 does it automatically.

Features:

• Automatically switches between ACV, DCV, and ohms (resistance). Benefit: Simple to use. Meter selects function and range, just connect the leads to the device under test.
• Single button operation. Benefit: Easy to use. Enables users with limited knowledge to perform tests safely.
• 0 to 600 volts AC and DC Benefit: Enough range to safely perform measurements
• 10 MΩ internal impedance. Benefit: High impedance prevents inaccurate reading caused by circuit loading.
• Auto power off. Benefit: Increases battery life by turning off the multimeter when not in use.
• 4,000 count display
• Up to 40MΩ
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V
• Includes Test Lead Set, Batteries and Protective Rubber Boot
• 3 Year Limited Warranty

Applications:

• Measure line and control circuit voltages
• Measure resistance of motor windings, transformers, and solenoids
• Make general AC and DC voltage and resistance measurements
• Measure the resistance of elements and electric heater cores
• Test continuity of wiring
• Verify voltage at breakers and outlets
• Use as a back-up meter in your tool box

The 100 comes complete with the following accessories:

• 100 Instrument
• Rubber Boot
• Test Lead Set
• 1.5V Battery
• Instruction Manual

0590 7701 770-1 TRMS Clamp Meter by Testo

The testo 770 Hook-clamp Digital Multimeter (DMM) is ideally suited for electrical work in HVAC applications. Testo's unique hooking clamp can be used to separate then grab wires. The easy hook-off retractable post releases the wires when testing is complete. You can safely work in tight spaces without using your hands. The 770 series identifies the testing in-process and automatically selects the correct meter configuration which saves you time and increases your accuracy.

The 770 series of instruments are rich in the features HVAC techs need and want including TRMS, starting current, and frequency measurement. The 770-2, which includes A can also measure temperature using the included Type K thermocouple adapter. The 770-3 (temperature adapter optional) additionally includes real-time power measurements (Watts), and Bluetooth. The 770-3 links to the Testo Smart Probes App and can be used for remote viewing, monitoring trending over time, and creating reports. The powerful app allows you to create custom reports that include photos, data, and graphs that can be saved or sent via email.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Unique hook-on function separates and grabs wires without using your hands, retractable post releases wires easily
• Automatically detects AC/DC for Volts or Amps, and selects the correct range
• Bluetooth connection to testo Smart Probe App (770-3 only)
• Real-time power measurement (Watts)
• Standard features: Inrush (starting) current capture; Min/Max/Hold
• Additional features (770-2/-3 only): μA for flame rod; High capacitance; Frequency measurement for variable drives