Monitor 200

0563 0875 73 875i-2 Deluxe Thermal Imager Kit by Testo

You can carry out completely damage-free tests on materials and components with the thermal imager testo 875-2i set. This allows you to visualize problems in industrial maintenance and production monitoring before a malfunction or a fire risk occurs. With the testo 875-2i, you are on the trail of energy loss in building thermography, helping your customers to save expensive heating costs. With the new thermal imager testo 875-2i, you save time, energy and money in industrial thermography as well as in building thermography, and ensure more security allround.

• Detector size 160 x 120 pixels: With 19,200 temperature measurement points, the measurement objects are detected in very good image quality, clearly and precisely.
• Super Resolution technology at 320 x 240 pixels: With Super Resolution technology, the image quality is improved by one class, i.e. the resolution of the thermal images is four times higher.
• Thermal sensitivity < 50 mK: Thanks to an excellent temperature resolution of < 50 mK, even the smallest temperature differences are visible.
• Built-in digital camera with power LED's: Parallel to the thermal image, a real image of each measurement object is also stored. The power LED's guarantee optimum illumination of dark areas when recording real images.
• Automatic Hot/Cold Spot Recognition: Critical temperature stati are directly displayed using the automatic Hot-Cold-Spot recognition.
• Solar mode: For each measurement, the sun irradiation value can be entered into the camera. This value is stored for each thermal image.
• Special measurement mode for detecting areas with danger of mould: Using the externally measured ambient temperature and air humidity, as well as the surface temperature, the humidity value of each measurement point is caculated and shown in the display as areal humidity image. Humidity measurement with radio humidity probe (optional).
• High temperature up to 550°C: With the high temperature option, the measuring range can be flexibly extended up to 550°C.
• Exchangeable lenses
• Voice recording using headset
• Intuitive operationv

The thermal imager testo 875-2 is delivered in a robust case incl.

• Pro software
• Soft-Case
• Carrying strap
• SD card
• USB cable
• Lens cleaning cloth
• Mains unit
• Li-ion rechargeable battery
• Adapter for tripod mounting
• Headset
• Telephoto lens 9° x 7°
• Lens protection glass
• Additional battery
• Fast battery charger

GH-591-VCM-01 RM-590 Multi-Channel Gas Monitoring System, 0 - 200 ppm Vinyl Chloride by RKI Instruments

Whether its in a chemical plant or engineering application, the model RM-590 provides continuous gas monitoring in hazardous locations.

The system is available in either a 4, 6, 9, or 12 channel wall mount housing making it easy to fit custom space requirements.

The brilliant three color bar graph display is quick and easy to read even from long distances. The RM-590's display changes colors, from green to orange to red, when the alarm set points are activated. For system flexibility, a built-in output signal of 4-20 mA can be used to interface with your existing Programmable Logic Controllers (PLC). The RM-590 is compatible with the widest range of detector heads providing the widest range of detectable gases in the industry. Detector heads can be either diffusion or sample drawing style which will ensure the most accurate delivery of samples given your particular facility or application.

Features:

• 4 digits digital LED display for gas concentration
• 2 Alarm levels with relays
• User selectable alarm functions (latching, self reset), and alarm test functions
• Integrated compact design with easy plug-in type modules
• Zero suppression function (Maintenance mode function)
• Accepts flow failure alarm
• Provides 4-20 mA output signal
• Wide variety of detectable gases and detector heads
• LonWorks network available as option

Applications:

• Petrochemical Plants
• Chemical Plants
• Semiconductor Manufacturing Plants
• Gas, Power, and Water Utilities
• Iron and Steel Works
• Engineering Public Works

*Please note we can only ship RKI products to customers within the United States

2200-002W GMA 200-MW16 Controller, Configured for 2 Measuring Points, Supply Voltage 24 V/DC, without Power Supply by GfG

The GMA 200-MW is our most flexible and advanced gas detection system controller. The design of the GMA 200-MW ensures simple and clearly structured operation in industrial and commercial applications. The system can be configured for control of any combination of GfG gas transmitters for the measurement of an extremely wide range of toxic and combustible gases and vapors.

Flexible modular design

Each GMA 200-MW module can control up to 16 individual gas transmitters (sensors). The self-contained, IP-65 wall-mounted housing facilitates cost-effective and space-saving installation. GMA 200-MW systems are scalable, and easy to expand by adding additional controller and relay modules. Optional gateway modules allow control via remote or touch-screen computer interface.

Easy to configure

Easy-to-use, menu driven GMA 200-MW software allows configuration of sensor type, gas type, measuring point designations, units of measurement, calibration curves, and function of the comprehensive and fully programmable relays. Up to three individual or specified alarm thresholds can be programmed for each measuring point. The GMA 200-MW continuously evaluates the analog input signals of the connected detectors.

Integrated relays

GMA 200-MW systems include comprehensive and fully programmable relays. Each controller is equipped with 8 internal relays. Menu-driven software allows easy assignment of measuring points to relays, single or multiple alarms per point, alarm thresholds, configuration of collective or group alarms, zoning, fault messages and voting functions.

Relay modules

GMA 200-RW relay modules are housed in easy to install IP-65 wall mounted enclosures. Each relay module provides an additional 16 freely configurable relays. A total of four additional relay modules (for 64 additional relays) can be managed by the same GMA 200-MW system. Digital connection with the GMA 200-MW controller allows remote positioning of the relay module wherever it makes the most sense, substantially reducing cabling and installation costs.

Remote terminal displays

Relay modules are available with or without an integral display for readings and system information, making it easy to add a remote terminal wherever needed.

Optional Fieldbus-Gateways

Optional gateway modules allow integration of the GMA 200-MW system into existing company networks based on TCP/IP, Process Field Bus or Process Field Network protocols. Monitoring and system performance data are easily exported for viewing or analysis. A wifi interface can be added to the gateway to allow wireless connection with a touch screen Windows® computer or smart-phone to display or access system information.

GMA 200 power options

GMA 200-MW power options include traditional voltage inputs (2 x 24 V DC, 20-30 V), as well as operation via a redundant, uninterruptible power supply (UPS), ensuring continued operation of the gas warning system even during a power outage.

Integral alarms

The GMA 200-MW includes built-in bright LED strobe light and loud audible alarms.

LED indicator lights

The status of the GMA 200-MW system (including operation, fault, service, alarm and relay status) is shown via LEDs. Individual LED indicators identify the type and severity of the alarm condition, (FLT, AL1, AL2, AL3), and any relays activated by the condition, (R1 through R8).

Datalogging standard

Measured values, mean values, alarm events and faults are permanently stored on a microSD memory card.

Graphical display

Currently measured values are displayed on a backlit, graphical LCD. In the event of an alarm the display changes color from green to red, and highlights the affected channels.

Five buttons enable operation at the GMA 200-MW controller. The main functions of the keyboard are the acknowledgement of alarms and the menu-driven operation. Information on the status of the controller, detector and the relays can be retrieved in the operating menu.

Operation via keypad

Operation of the GMA 200-MW is through easy-to-use menus, and a simple 5 button interface for alarm acknowledgement, and viewing information on the status of the gas warning system, detectors and relays. The intuitive push-button controls make it easy to navigate through additional screens of information. The integrated display enables the reading of alarm levels through the controller LCD for easy hazard assessment.

Configuration

A built-in USB port in the GMA 200-MW is used for connection to the configuration software. GMA 200-MW systems connected through a Fieldbus gateway can be remotely connected with a GfG factory service center for configuration, diagnostic or service evaluation.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Additional modules available in IP-65 wall-mounting housings

• External relay module: GMA 200-RW
• Independent power supply: GMA 200-UPS
• Continuous, motorized pump sampling unit: GMA 200-ASV
• Fieldbus gateway: GMA 200-GW

Features

• Advanced and flexible controller for combustible, O₂ and toxic gas
• IP-65 wall-mounting housing, with integral audible and LED alarms
• Flexible, reliable and economic
• Up to 16 transmitters per GMA 200-MW controller in any combination
• Freely programmable relays
• Clearly structured, easy-to-use push-button interface
• Backlit graphic LCD changes color to indicate alarm
• Connect to other measurement devices with 4-20 mA output

CCR20DX7X8CF5 Corrosion Coupon Rack, Strainer, Inlet/Outlet Valves, Flow Control Valve, 2 Station Carbon, 200°F, 200 PSI, 5 GPM by Quantrol

Our Corrosion Coupon Racks are hydrostatically tested for maximum system performance exceeding industry standards.

Pulsafeeder's standard corrosion rack systems are designed to provide reliable, convenient side stream monitoring using ASTM standard coupons. These rugged systems are available for cool or hot water systems and can be configured for up to six monitoring stations.

Available options include quick release coupon holders, flow meters, y-strainers and more.

Features

• Schedule 80 PVC piping assembly and components for standard applications
• Schedule 40 black iron piping assembly and components for hot water applications
• All black iron racks are supplied on unistrut for easy installation
• Designed to ASTM specifications
• Wall mountable for easy installation
• Accepts ASTM test coupons
• Plastic pipe systems are mounted on 1/4" Poly panel

Applications

• Cooling Tower Systems
• Once-Thru Cooling
• Closed Loop Cooling
• Boiler Water Systems

0563 1051 105 T-handle Thermometer by Testo

The robust food thermometer with exchangeable measurement tips for monitoring measurements in abattoirs, refrigerated storerooms, trucks etc.

• 2 user-defined limit values, visual or audible alarm
• Built-in display illumination
• Audible key feedback
• 1 line display
• Waterproof (IP 65) and robust
• Standard measurement tip 100 mm
• Frozen food tip 90 mm
• Long measurement tip 200 mm
• Easy-to-change measurement tips

72-0052RK XP-204A Hand Aspirated Single Gas Indicator, Dual Range Oxygen, 0 - 25% & 0 - 5% Volume, Includes Leather Case, 3' Hose, 10" Probe, Aspirator and Two 9 Volt Alkaline Batteries by RKI Instruments

The P-200 series gas detectors are rugged, lightweight, hand held portables for detecting combustible gases/vapors and monitoring atmospheric oxygen content. Engineered to serve the demanding field requirements of industrial, public works, utilities, and landfills, these instruments share many common features and offer the user distinct advantages in terms of economy, dependability, maintainability and ease of operation. Built to withstand rough field environments, all Series P-200 instruments are constructed with rugged cast aluminum housings, and incorporate highly reliable electrical design characteristics. All active and passive components are mounted on easily accessible printed circuit boards. In operation, all P-200 instruments are not only easy to use, sharing common functional characteristics, but they are extraordinarily fast in providing accurate readings. For combustible indicators, the response time is about 4 seconds, and for oxygen indicators an accurate reading is attained within 6 seconds.

By maximizing the use of common components and operating characteristics, RKI offers not only high quality field instruments, but has greatly simplified and expedited other very important considerations, such as field service, personnel training and accessory interchangeability. The commonality of components can save valuable time when field service becomes necessary. Fundamental operating features are easy to understand and all components are very accessible for checkout, replacement or repair.

Features

• Fast Response
• Light Weight
• Rugged Construction
• Simple to Operate
• Economical
• Field Proven Dependability

Industry Applications

• Industrial Applications
• Land Fills
• Utilities
• Public Works

*Please note we can only ship RKI products to customers within the United States

WD-35820-25 Industrial Conductivity Cell, 10 ft Cable, 3/4 MNPT Threaded Housing, Glass Body, Platinized Platinum Sensor, K = 1.0 (Use with CON 100, CON 200, CON 1000, and RES 1000 controllers) by Oakton

Feature built-in temperature compensation

• Designed for continuous in-line monitoring
• Feature stripped ends for easy wiring

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)
• K = 0.01 for resistivity measurements (at or below 2 µS)

Install these rugged cells in a pipeline, or submerse in a tank.

Dimensions: 142 mm L x 12 mm dia. Shpg wt 0.5 lb.

WD-35820-21 Industrial Conductivity Cell, 10 ft Cable, 3/4 MNPT Threaded Housing, Epoxy Body, Graphite Sensor, K= 0.1 (Use with CON 100, CON 200, CON 1000, and RES 1000 controllers) by Oakton

Feature built-in temperature compensation

• Designed for continuous in-line monitoring
• Feature stripped ends for easy wiring

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)
• K = 0.01 for resistivity measurements (at or below 2 µS)

Install these rugged cells in a pipeline, or submerse in a tank.

Dimensions: 142 mm L x 12 mm dia. Shpg wt 0.5 lb.

WD-35820-60 Industrial Conductivity Cell, 25 ft Cable, Epoxy Body, Graphite Sensor, K=0.1. Requires Threaded Housing; Order Separately (Use with CON 100, CON 200, CON 1000, and RES 1000 controllers) by Oakton

Feature built-in temperature compensation

• Designed for continuous in-line monitoring
• Feature stripped ends for easy wiring

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)
• K = 0.01 for resistivity measurements (at or below 2 µS)

Install these rugged cells in a pipeline, or submerse in a tank.

Dimensions: 142 mm L x 12 mm dia. Shpg wt 0.5 lb.

18523-51 Inconel Type K Thermocouple Probe, Quick Dis-connector, 6" L x 3/16" Dia, Grounded by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

3015-5044 HGM-MZ 8 Zone Halogen Gas Monitor, 120-240 VAC / 50/60Hz Input Power by Bacharach

Bacharach's Multi-Zone Gas Leak Monitors offer superior performance, flexibility and functionality for low level continuous monitoring of refrigerant gases used in most commercial systems including: Chlorofluorocarbons (CFC), Hydrochlorofluorocarbons (HCFC), Hydrofluorocarbons (HFC), Ammonia (NH3) and Carbon Dioxide (CO2). These state-of-the-art fixed gas monitors lead the industry in performance, integration capabilities, initial cost and cost of ownership. Capable of detecting more than 38 refrigerant gases, the Multi-Zone system is compliant with ASHRAE standard 15-2007, is ETL Energy Saving Listed, meets California Code Regulations for Refrigerant Monitors and is EN 14624 and CE certified.

Bacharach Multi-Zone Monitors provide continuous detection of refrigerant gas levels in up to 16 separate test zones and can be fitted with an optional two channel 4-20 mA current loop board for connection to remote monitoring equipment. Multi-Zone monitors retain a log of previous readings that can be easily accessed for analysis. Four relay contacts are provided that can be programmed to trigger external alarm devices in the event of a system fault, or if a leak (small), spill (medium) or evacuation (large) level of gas is detected, while audible and visual front panel indicators show alarm and fault conditions. With only minor periodic maintenance, such as the occasional replacement of filters, and active diagnostics that continuously check the system for proper operation, Multi-Zone monitors help maintain your equipment efficiency, promote safety and protect the environment.

Ideal for Chillers, Grocery Stores, Mechanical Rooms Physical Plants, Refrigeration Racks, Walk-In Freezers

Features & Benefits:

• Proprietary infrared sensing technology virtually eliminates false alarms and extends sensor life
• No calibration required
• Low detection limits enable leaks to be found early reducing energy and refrigerant consumption
• Fastest sampling rate with the longest sampling distance in the industry at 1,200 feet
• Large Graphic LCD for easy set-up and real-time monitoring

18520-13 Type J Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 12" L, .250 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

0563 1052 105 T-handle Thermometer Kit with 3 probes and case by Testo

The robust food thermometer with exchangeable measurement tips for monitoring measurements in abattoirs, refrigerated storerooms, trucks etc.

Kits includes:

• one-hand thermometer
• standard measurement tip
• frozen food tip
• long measurement tip and belt/wall holder
• aluminium case

• 2 user-defined limit values, visual or audible alarm
• Built-in display illumination
• Audible key feedback
• 1 line display
• Waterproof (IP 65) and robust
• Standard measurement tip 100 mm
• Frozen food tip 90 mm
• Long measurement tip 200 mm
• Easy-to-change measurement tips

*Please note we can only ship RKI products to customers within the United States

18520-10 Type T Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 6" L, .250 Dia, Exposed Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

Observer Software by SE International

The New Observer USB is a free version of the Observer software that runs on Windows®. It can be used with The Ranger, The Ranger EXP, & The Monitor 200 Radiation Detectors. The Observer USB reads in Counts, CPM, and CPS, as well as μR/hr, mR/hr, and μSv/hr and has the ability to collect, log, and perform statistical analysis on the data received. No Mac or WinRT versions available. However, for info about running windows on an Apple computer, please click here.

Free Download of the Observer USB Software:

Observer USB Software 1.3.0.8

Downloaded Data Sample

Previous Revision:
Observer USB 1.1.1.0

08077-48 Oven Verification Thermometer; 50 to 200C by Digi-Sense

Accurately monitor temperatures in freezers, refrigerators, incubators, ovens, and other environments where stability is required. All thermometers are supplied in a glass bead filled unbreakable plastic bottle and can be removed from the bottle for recalibration. Use the magnetic attachment with pressure-sensitive backing to attach the bottle to a metal wall or door.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an statement of accuracy and a triangular-style antiroll fitting.

• An individually serial number is printed on the thermometer stem
• Nonmercury blue spirit liquid

2200-005WP GMA 200 Controller, for 5 measuring points, supply voltage 110 V AC by GfG

The GMA 200-MW is our most flexible and advanced gas detection system controller. The design of the GMA 200-MW ensures simple and clearly structured operation in industrial and commercial applications. The system can be configured for control of any combination of GfG gas transmitters for the measurement of an extremely wide range of toxic and combustible gases and vapors.

Flexible modular design

Each GMA 200-MW module can control up to 16 individual gas transmitters (sensors). The self-contained, IP-65 wall-mounted housing facilitates cost-effective and space-saving installation. GMA 200-MW systems are scalable, and easy to expand by adding additional controller and relay modules. Optional gateway modules allow control via remote or touch-screen computer interface.

Easy to configure

Easy-to-use, menu driven GMA 200-MW software allows configuration of sensor type, gas type, measuring point designations, units of measurement, calibration curves, and function of the comprehensive and fully programmable relays. Up to three individual or specified alarm thresholds can be programmed for each measuring point. The GMA 200-MW continuously evaluates the analog input signals of the connected detectors.

Integrated relays

GMA 200-MW systems include comprehensive and fully programmable relays. Each controller is equipped with 8 internal relays. Menu-driven software allows easy assignment of measuring points to relays, single or multiple alarms per point, alarm thresholds, configuration of collective or group alarms, zoning, fault messages and voting functions.

Relay modules

GMA 200-RW relay modules are housed in easy to install IP-65 wall mounted enclosures. Each relay module provides an additional 16 freely configurable relays. A total of four additional relay modules (for 64 additional relays) can be managed by the same GMA 200-MW system. Digital connection with the GMA 200-MW controller allows remote positioning of the relay module wherever it makes the most sense, substantially reducing cabling and installation costs.

Remote terminal displays

Relay modules are available with or without an integral display for readings and system information, making it easy to add a remote terminal wherever needed.

Optional Fieldbus-Gateways

Optional gateway modules allow integration of the GMA 200-MW system into existing company networks based on TCP/IP, Process Field Bus or Process Field Network protocols. Monitoring and system performance data are easily exported for viewing or analysis. A wifi interface can be added to the gateway to allow wireless connection with a touch screen Windows® computer or smart-phone to display or access system information.

GMA 200 power options

GMA 200-MW power options include traditional voltage inputs (2 x 24 V DC, 20-30 V), as well as operation via a redundant, uninterruptible power supply (UPS), ensuring continued operation of the gas warning system even during a power outage.

Integral alarms

The GMA 200-MW includes built-in bright LED strobe light and loud audible alarms.

LED indicator lights

The status of the GMA 200-MW system (including operation, fault, service, alarm and relay status) is shown via LEDs. Individual LED indicators identify the type and severity of the alarm condition, (FLT, AL1, AL2, AL3), and any relays activated by the condition, (R1 through R8).

Datalogging standard

Measured values, mean values, alarm events and faults are permanently stored on a microSD memory card.

Graphical display

Currently measured values are displayed on a backlit, graphical LCD. In the event of an alarm the display changes color from green to red, and highlights the affected channels.

Five buttons enable operation at the GMA 200-MW controller. The main functions of the keyboard are the acknowledgement of alarms and the menu-driven operation. Information on the status of the controller, detector and the relays can be retrieved in the operating menu.

Operation via keypad

Operation of the GMA 200-MW is through easy-to-use menus, and a simple 5 button interface for alarm acknowledgement, and viewing information on the status of the gas warning system, detectors and relays. The intuitive push-button controls make it easy to navigate through additional screens of information. The integrated display enables the reading of alarm levels through the controller LCD for easy hazard assessment.

Configuration

A built-in USB port in the GMA 200-MW is used for connection to the configuration software. GMA 200-MW systems connected through a Fieldbus gateway can be remotely connected with a GfG factory service center for configuration, diagnostic or service evaluation.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Additional modules available in IP-65 wall-mounting housings

• External relay module: GMA 200-RW
• Independent power supply: GMA 200-UPS
• Continuous, motorized pump sampling unit: GMA 200-ASV
• Fieldbus gateway: GMA 200-GW

Features

• Advanced and flexible controller for combustible, O₂ and toxic gas
• IP-65 wall-mounting housing, with integral audible and LED alarms
• Flexible, reliable and economic
• Up to 16 transmitters per GMA 200-MW controller in any combination
• Freely programmable relays
• Clearly structured, easy-to-use push-button interface
• Backlit graphic LCD changes color to indicate alarm
• Connect to other measurement devices with 4-20 mA output

S01-A110-200 ProRAE Guardian CD with Printed Manual by RAE Systems

ProRAE Guardian is real-time gas, radiation, dust, weather, and physiological monitoring software that connects, integrates, and relays data from various wireless monitors to a centralized system. The command center instantly displays device status, alarm, and sensor reading information, integrating all information in a single dynamic view. ProRAE Guardian real-time monitoring empowers safety professionals with instant updates of monitor data for making intelligent time critical decisions.

ProRAE Guardian advanced device management enables operational managers to manage their fleets of monitors and track worker device assignments. In addition, it can automate several common tasks to improve worker productivity along with the flexibility to define custom alerts specific to a work environment.

Key Features

• Real-time display of device status, sensor readings, and alarms
• Integrated Google Maps show precise instrument locations with alarm status
• Datalogging in text and graphical formats, and includes boolean filters
• Supports all RAE Systems wireless enabled products
• Supports up to 512 instruments simultaneously
• Dashboard for overall system status
• Fleet management for instruments
• Activity automation for calibration, bump test and report generation
• Custom rules for alarm notifications
• Remote notifications via email and text messages
• Worker-instrument association
• Security features for data protection and networking
• Leasing option for short duration projects
• Software Development Kit for integration with external systems
• Centralized monitoring of wide areas
• Simultaneous monitor data aggregation
• Increased situational awareness
• 24/7 monitoring of exposure conditions
• Early warning and tracking of hazardous threats
• Distributed Control Systems integration for process automation
• Management and control of monitors and detectors
• Increased productivity through task automation
• Lower deployment costs

WD-35820-62 Industrial Conductivity Cell, 25 ft Cable, Epoxy Body, Graphite Sensor, K=1.0. Requires Threaded Housing; Order Separately (Use with CON 100, CON 200, CON 1000, and RES 1000 controllers) by Oakton

Feature built-in temperature compensation

• Designed for continuous in-line monitoring
• Feature stripped ends for easy wiring

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)
• K = 0.01 for resistivity measurements (at or below 2 µS)

Install these rugged cells in a pipeline, or submerse in a tank.

Dimensions: 142 mm L x 12 mm dia. Shpg wt 0.5 lb.

2109-200F EC 21 Fixed Gas Transmitter with Internal Sensor, Ammonia (NH3), 2 ppm, 0 - 200 ppm by GfG

GfG s EC 21 transmitter for detecting toxic gases in ambient air is an inexpensive gas detection solution for use in a wide variety of today's industrial applications.

Simple gas detection

The EC 21 is the simplest way to monitor ambient conditions. Simply attach the EC21 to a GfG controller or a PLC to continuously and efficiently monitor the concentration of hazardous toxic contaminants in the air.

The EC 21 is reverse-wire protected to prevent damage due to incorrect wiring of the device. The power connector hasa "quick disconnect" feature to simplify transmitter installation and service.

Mounting Position of the EC 21

To determine the mounting position of the EC 21 it is important to know and consider the ambient conditions. To achieve the best results, the ventilation conditions and the density of the gases need to be considered.

The EC 21 must be installed so that the gas reaches the sensor even in poorly ventilated areas. If necessary, check the area with a smoke cartridge.

Other influences such as water (rain, dripping or condensation) and dust need to be considered as well.

Features

• Simple to use and extremely economical
• Robust housing is corrosion resistant and dust-tight>
• Linear 4 to 20 mA output signal
• 18 - 24 VDC

18520-01 Type J Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 6" L, .250 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

CCR40DX7X8CF5 Corrosion Coupon Rack, Strainer, Inlet/Outlet Valves, Flow Control Valve, 4 Station Carbon, 200°F, 200 PSI, 5 GPM by Quantrol

Our Corrosion Coupon Racks are hydrostatically tested for maximum system performance exceeding industry standards.

Pulsafeeder's standard corrosion rack systems are designed to provide reliable, convenient side stream monitoring using ASTM standard coupons. These rugged systems are available for cool or hot water systems and can be configured for up to six monitoring stations.

Available options include quick release coupon holders, flow meters, y-strainers and more.

Features

• Schedule 80 PVC piping assembly and components for standard applications
• Schedule 40 black iron piping assembly and components for hot water applications
• All black iron racks are supplied on unistrut for easy installation
• Designed to ASTM specifications
• Wall mountable for easy installation
• Accepts ASTM test coupons
• Plastic pipe systems are mounted on 1/4" Poly panel

Applications

• Cooling Tower Systems
• Once-Thru Cooling
• Closed Loop Cooling
• Boiler Water Systems