Handheld

72-6AVB-C GX-6000 Sample Draw Gas Monitor, LEL/Oxy/H2S/CO/VOC(10.0 eV)/VOC(10.6 eV 4k ppm), with Li-ion batt pack/100-240 VAC charger by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

9250MKC D.O. & Temperature Handheld Polarographic Meter with Memory & RS-232 Kit by Jenco

Includes:

• 9250M: DO meter
• LD-900-10/10: DO Field Probe, Stainless Steel, 10K, 10-ft Cable, 8-Pin
• LD-900-03A: Membrane Kit with 6-Membrane Caps & KCL Solution
• 9250F: Carrying case
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter

• Clear LCD displays dissolved oxygen as percent air saturation or as parts per thousand simultaneously with temperature.
• Convenient one point calibration for dissolved oxygen. Calibration data is stored in memory and is ready for use on power up.
• User selectable salinity and pressure compensated dissolved oxygen readings.
• Work with accurate and reliable polarographic dissolved oxygen probes.
• Inclined back provides ideal viewing angle for benchtop use.
• 50 memory storage of dissolved oxygen with temperature reading with memory location ID.
• RS-232 computer interface with software.
• IP65 waterproof.
• AC adaptor or battery power (low battery indicator).

6231NKB pH/mV/Temp. Microprocessor Handheld Meter Kit by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

Includes:

• 6231N pH/mV/Temp. Microprocessor Handheld Meter
• 6000P pH/Ref./Temp. Probe
• 6005C Extension Cable

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• A conventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

Biosystems Multipro Confined Space Gas Detector

The BiosystemsMultipro Confined Space Gas Detector is a compact and efficient confined space detector. Understanding user needs and industrial applications, Sperian designed the detector with numerous features and optional accessories. The unit offers easy to read live gas readings and one button operations. The alarms are effective and unmistakable while on the site. The device is customizable and configurations are easy to adjust. With a durable casing, rubber molding, and a sleek design, the detector is the perfect handheld instrument for onsite gas detection needs.

Versatility and Customization

The gas detector is simple in design and compatible with many accessories designed to improve its versatility while allowing for user customization. Users can purchase accessories to customize the unit to fit their workplaces specific needs. Optional accessories include sampling pumps, calibration adapters, sample draw kits, and sample probes.

Key Features and Accessories

The BiosystemsMultipro Confined Space Gas Detector features a sleek and compact design with one button operation and an easy to read front mounted display with a backlight. An optional slip-on software controlled pump is available. The pump is powered by the BiosystemsMultiPro battery. It will indicate low flow and will perform an automatic leak test before every use. For recordkeeping, an automatic event logger and optional datalogging is available. The unit also features a Black Box recorder with over 40 hours of storage. When purchasing the detector, users will also receive.

• an operator s guide
• a training CD-ROM
• a charger for the rechargeable version
• a clothes clip
• a laminated quick reference guide
• a calibration adapter
• tubing

Sensors and Batteries

The unit is available with 3 sensors. Each sensor is user replaceable. The detector has a one button auto calibration with a calibration due reminder. The sensors are also capable of providing calibration for predictive maintenance. The confined space gas detector uses either interchangeable alkaline or rechargeable (Li-Ion) batteries. It also uses a drop-in charger while fully recharging in less than 6 hours.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation has over 50 years of industry experience in research and development. Because of its global reputation for dependable and reliable personal safety products, Honeywell announced its intent to acquire the company in 2010. Sperian Protection Instrumentation is now owned by Honeywell and has expanded Honeywell s offerings in the personal safety industries and the American market. Sperian is world renowned for design innovation and advanced technologies. With this acquisition, Honeywell intends to carry on Sperian s legacy of delivering innovative and advanced safety products.

72-6XEM-A GX-6000 Six Sensor Sample Draw Gas Monitor, CO2 (0-10,000 ppm) / NH3 (0-400 ppm), with Alkaline Battery Pack by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

T02-0203-000 AutoRAE 2 Cradle for QRAE 3 by RAE Systems

The AutoRAE 2 Automatic Test and Calibration System for RAE Systems portable monitors makes instrument testing and calibration compliance as easy as pressing a button. Simply cradle the monitor, and the system takes care of calibration, testing, and battery recharging.

The AutoRAE 2 system is flexible and modular, and can be configured to efficiently meet your calibration and records management requirements. An AutoRAE 2 system can be as simple as a single cradle deployed in stand-alone mode to calibrate one instrument at a time, or as powerful as a networked, controller-based system supporting 10 instrument cradles and 5 distinct calibration gases or gas mixtures.

Key Features

• Automatic testing, calibration, charging system
• Deployable as a stand-alone cradle or a controller-based system with up to 10 cradles
• Controller with a large, color LCD display
• Networking capability
• Up to 5 calibration gas cylinders can be connected at the same time
• Automatic instrument FW update option
• Instruments datalogging file recorded automatically on controller SD card
• Bench-top or wall-mounted use
• Instruments supported: ToxiRAE Pro Series/QRAE3, MicroRAE/MultiRAE Series (except diffusion model)
• Single Cradle for all Handheld PID, QRAE 3 and ToxiRAE Pro family instruments

Industries

• Oil and Gas
• Industrial
• Environmental
• Fire Service
• National Security

Sperian Biosystems ToxiProSingle Gas Detector Series

The BiosystemsToxiPro Single Gas Detectors are simple and intuitive portable gas detectors designed to meet the needs of many industrial applications. The single gas detectors are compatible with a wide variety of gas sensors and configurations. The detectors offer a no frills approach to gas detection that helps eliminate the need for excess training and reduce human errors due to equipment complexities. With the BiosystemsToxiPro Single Gas Detector series, users and safety managers can feel confident that their equipment is easy to operate and understand while in the field.

Impressive and Intuitive Alarm System

Although simple in design, the single gas detectors offer an impressive and intuitive alarm system. Each unit features 3 visual alarm windows for increased worker safety. Furthermore, each window has standard yellow and red LED alarms. In a warning situation, the yellow lights will flash in a sequential manner. In dangerous conditions, the red lights will flash in a sequential manner. Additionally, the ToxiPro Single Gas Detector series has an audible alarm that is 10% louder than industry standard. This helps to ensure that the user and those nearby are notified of any potentially dangerous conditions. The device offers an optional vibrating alarm and user selected sound patterns as well.

Automatic Docking Station

The BiosystemsToxiPro Single Gas Detectors are compatible with Sperian Protection Instrumentation s automatic docking station. The automatic docking station performs a wide variety of performance and maintenance operations to improve the equipment s operability while reducing user maintenance. It has the added benefit of saving time and money while improving compliance for record keeping requirements. With the fully compatible automatic docking station, users can automatically test the equipment for functionality, calibration, and much more by simply loading the device onto the station. The station will also automatically calibrate the equipment when needed.

BiosystemsToxiPro Single Gas Detector Specifications

The BiosystemsToxiPro Single Gas Detector is a compact and portable handheld system for use in a wide variety of industry applications. The detector is light weight at approximately 3.5 ounces and fits in the palm of your hand (3.3 x 2.19 x 1.16 inches). Its casing is both dust and water resistant, ensuring its performance in some of the harshest worksite conditions. The unit comes standard with a calibration adapter, an operator s guide, and a quick reference card.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation has been in business for over 50 years providing personal protection that industries trust. With its recent acquisition by Honeywell, Honeywell intends to utilize Sperian s great foundation and years of experience. Honeywell is a global leader in industrial technology and safety equipment. Together, Honeywell hopes to improve its offerings across the globe and continue to lead the charge for innovative and efficient technology.

72-6ACX-F GX-6000 One Sensor Sample Draw Gas Monitor, LEL/Oxy/H2S/CO/IR CH4 autorange, Li-Ion batt pack, 100-240 VAC/12 VDC chgr by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

72-6XEX-B GX-6000 One Sensor Sample Draw Gas Monitor, IR CO2(0-10K ppm), alk pack/Li-Ion pack/100-240 VAC chgr by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

72-6XZC-B GX-6000 One Sensor Sample Draw Gas Monitor, VOC(0-100ppm/0-50ppm 10.0eV)/IR CH4 autoranging, alk pack/Li-Ion pack/100-240 VAC chgr by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

72-6XZX-C GX-6000 One Sensor Sample Draw Gas Monitor, Benzene Specific (0 - 50 ppm PID) with Tube Holder, Box of 10 Tubes, Li-Ion Battery Pack, and Charger by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

2420-1110 PCA 400 Combustion & Emissions Analyzer with O2, CO-high, 7.5 ft standard tubing and standard case by Bacharach

MSA Bacharach's PCA® 400 is a handheld versatile combustion and emissions analyzer for commercial and individual applications. The analyzer may be configured for up to 4 gas sensors, including O2, CO, NO, NO2 and SO2. The PCA® 400's portable and durable design is ideal for testing, tuning, and maintaining burners, engines, furnaces and variety of other commercial and industrial combustion applications. The analyzer also features Bluetooth® communications which allows users to view real-time data send customizable reports from their compatible smart phone.

FEATURES

• Up to 4 Gas Sensors (O2, CO, NO, NO2 & SO2)
• Sample Conditioner
• Real-Time PC Software
• Combustion App
• Long Life O2 Sensor (5 Year Warranty)
• Automatic Dilution and Sensor Protection
• Dual Bluetooth and IR Printer with magnet
• Precalibrated, Sensor Exchange Program Sensors

Benefits

• Versatile analyser for many commercial and industrial applications
• Superior accuracy for low NOx and SOx applications
• View and save live data for easy compliance reporting
• Quickly create custom reports with comments and send via email (available for Android & iOS).
• Reduced maintenance cost and downtime
• Protects sensors in the toughest combustion environments, extending life
• Print combustion and emissions reports in the field
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)

XNX-AMSE-MHNNN XNX Universal Transmitter, ATEX M25 SS MDBS HRT FOR TOXO2 SNSR by Honeywell Analytics

XNX Universal Transmitter, ATEX M25 AL FF HRT FOR TOX/O2 SNSRThe XNX Universal Transmitter, now with HART EDDL, marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs.

XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) software provides users with an at-a-glance indication of the health of their gas detectors in the field.

Bringing together the best solutions in gas detection

Electrochemical

• Proven electrochemical sensing technology
• Surecell™ electrochemical cells are ideal for hot and humid environments
• Long life sensing cells (typical >2 years)
• Patented 'Reflex' sensing element verification diagnostics
• Sensor recognition software auto configures transmitter
• Plug and play factory configured sensors
• Intrinsically safe sensor connection permits hot swap, reducing down time

Catalytic Bead

• Supports Honeywell Analytics 705, 705HT, Sensepoint, Sensepoint HT and MPD sensors
• Fast response to wide range of hydrocarbons and flammables

Infrared (Open Path IR, Point IR, IR Cell)

• Supports Honeywell Analytics Searchline Excel, Searchpoint Optima Plus
• Failsafe operation
• Fast speed of response
• Reduced routine maintenance
• Immune to catalytic poisons
• Long operating life
• Works in inert atmospheres

High performance

• Flammable gas detection 0 to 100% LFL/LEL
• Point IR with heated optics provides immunity to poisoning and no hidden faults
• Open-path IR flammable gas detection in LEL-m measurement
• Electrochemical cell offers toxic gas detection in ppm
• IR cell provides CO₂ and combustible gas monitoring
• Robust and reliable operation in explosive areas and harsh environments

Flexible Operation

• 3 versions - supports (Catalytic Bead and IR Cell), Electrochemical Cell and IR (point and open-path) gas detection
• Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability
• 4-20mA with HART® as standard
• HART Enhanced Device Description Language (EDDL) software*
• Multiple communications options include up to 3 relays, MODBUS® and FOUNDATION® H1 Fieldbus
• Optional local IS port for handheld HART configurator

Easy to Use

• Large, backlit, easy-to-view LCD display offers multisensory indicators (visual icons, colored buttons, text, etc.) to display gas and sensor readings
• User interface supported by 8 selectable languages (English, Spanish, German, Italian, Portuguese, French, Russian, Chinese)
• Self-test and fault indication features
• Non-intrusive, one-man operation
• Quick calibration with auto-inhibit

Easy to Install

• 3 or 4 wire operation, source, sink or isolated
• Simple plug-in sensors and replaceable cells
• NEMA 4X IP66 rated for rugged indoor/outdoor use
• Five conduit entries for ease of installation

Cost Effective

• Minimal training required
• One-man operation
• Plug-in sensor replacement
• All necessary accessories included

183A True RMS DMM with Temperature, Capacitance, Duty Cycle and Low-pass Filter by Test Products International

The 183A is a hand-held autoranging DMM. The 183A measures ACV, DCV, ACA, DCA, Resistance, Frequency, Duty Cycle, Diodes, Capacitance, Temperature and Continuity. The meter is also easy to use and built to last.

Features:

• REC: Records Min/Max and Average readings during specified measurement intervals.
• Range: Allows the user to manually range the 183A instead of autoranging.
• Hold: Holds the reading on the display for easy viewing.
• REL: Displays the value as a difference to a reference value.
• Auto Off: Preserves battery life.
• Rubber Boot: Added protection when the instrument is dropped.
• 0.5% DCV basic accuracy
• 0 to 750 ACV; max resolution 1mV
• 0 to 1,000 DCV; max resolution 0.1mV
• 0 to 32.6MΩ; max resolution 0.1Ω
• Audible continuity
• 0 to 10 amps AC/DC; max resolution 0.1uA
• Analog bar graph
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V

Applications:

• Thermocouples in furnaces or gas applications
• Heat anticipator current in thermostats
• Line voltage
• Voltage of direct drive DC motors
• Control circuit voltage
• Motor run and start capacitors
• Flame safeguard control current
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring
• Continuity of circuit breakers
• Temperature with optional temperature adapter
• Bar graph to indicate rapid fluctuations in measurements

The 183A comes complete with the following accessories:

• 183A Instrument
• Zippered Vinyl Carrying Case
• Rubber Boot
• Test Lead Set
• Instruction Manual

72-6AZB-G GX-6000 Sample Draw Gas Monitor, LEL/Oxy/H2S/CO/VOC(10.0eV)/VOC(6K ppm10.6eV), with alk & Li-ion batt/100-240 VAC/12 VDC chargers by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

72-6HBF-C GX-6000 One Sensor Sample Draw Gas Monitor, LEL/Oxy/VOC(0-6K ppm 10.6 eV)/IR CO2(0-10%), with Li-ion pack/100-240 VAC charger by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

6010NKC Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010N Handheld pH/ORP Meter
• 6000A Glass, 10K Thermistor with Jenco Screw Connector
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

ALTAIR 5XIR, MULTI, HANDHELD; COLOR, HYDROGEN SENSOR 0-100 PCT LEL, OXYGEN SENSOR 0-30 PCT VOL, CO/H2S SENSOR 0-1999 PPM AND 0-200 PPM, ADVANCED IR SENSOR C3H8 0-100 PCT VOL, SAMPLING PROBE KIT REACTIVE; by MSA

In the face of potentially dangerous situations, workers need to feel certain that they are protected by the very best safety products on the market. MSA, the Safety Company, provides workers with the security they need to get the job done safely. The Altair 5X Multigas Detector is an industry leader in gas detection and safety features. With high standards of safety and advanced technology to ensure the reliability and longevity of the unit, workers can be certain that the unit represents the most advanced technology in gas detection.

Altair 5X Multigas Detector features

Exclusive features such as the MotionAlert and Instant Alert provide a sense of security when in potentially dangerous settings. When a user is motionless or disabled, MotionAlert activates and transmits an alert to others with the disabled user s location. The Instant Alert feature allows users to manually transmit an alert to others warning of a potentially hazardous situation.

The Altair 5X Multigas detector features an unparalleled flexibility and versatility designed to meet the unique needs of its many users. From high-resolution color displays or monochromatic LED screens to its 18 different language options, the detectors versatility is unmatched by competitors. Users can also find a wide variety of applications, kits, and accessories to better customize the unit.

Cell Sensor technology

Durability

Specifications

With an audible alarm of greater than 95 decibels, a visual alarm of 2 LED lights, and a standard vibrating alarm, the unit is well designed to alert users of potential gases. The devices can also effectively store up to 1000 events.

Users can also minimize risk of user errors by participating in MSA s online training and web content. This includes new Altair 5 X Multigas Detector simulation tutorials designed to simulate instrument operation.

2412-1310 PCA 400 Combustion & Emissions Analyzer with O2, CO, NO, NO2, 12 in. probe with 7.5 ft. VITON tubing and standard case by Bacharach

MSA Bacharach's PCA® 400 is a handheld versatile combustion and emissions analyzer for commercial and individual applications. The analyzer may be configured for up to 4 gas sensors, including O2, CO, NO, NO2 and SO2. The PCA® 400's portable and durable design is ideal for testing, tuning, and maintaining burners, engines, furnaces and variety of other commercial and industrial combustion applications. The analyzer also features Bluetooth® communications which allows users to view real-time data send customizable reports from their compatible smart phone.

FEATURES

• Up to 4 Gas Sensors (O2, CO, NO, NO2 & SO2)
• Sample Conditioner
• Real-Time PC Software
• Combustion App
• Long Life O2 Sensor (5 Year Warranty)
• Automatic Dilution and Sensor Protection
• Dual Bluetooth and IR Printer with magnet
• Precalibrated, Sensor Exchange Program Sensors

Benefits

• Versatile analyser for many commercial and industrial applications
• Superior accuracy for low NOx and SOx applications
• View and save live data for easy compliance reporting
• Quickly create custom reports with comments and send via email (available for Android & iOS).
• Reduced maintenance cost and downtime
• Protects sensors in the toughest combustion environments, extending life
• Print combustion and emissions reports in the field
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)

94315 Moon Filter Set, 1.25" by Celestron

Our Moon is the most popular object to observe with a telescope. It's an obvious target that's easy to locate and full of exciting geographical features to explore. Moon filters enhance lunar viewing by cutting down on the Moon's bright glare, improving contrast and making faint details easier to observe. Amateur astronomers refer to Moon filters as "sunglasses for the Moon" because they provide a more comfortable view and reduce eye fatigue.

This Moon Filter Set contains all the filters you will ever need to observe the Moon during its various phases. The set allows you to choose the best filter to use with different eyepiece and telescope combinations. Use the darkest filter with larger aperture telescopes and lower magnification eyepieces. Use the lighter filters with smaller telescopes and higher magnification eyepieces.

This kit is essential for those looking to take the next step in exploring their telescope's full lunar capability, or for seasoned lunar observers who use a variety of telescopes and eyepieces to observe the Moon.

• Four great Moon filters in one kit-everything you'll ever need for optimal views of the lunar surface
• Three neutral density (ND) filters with different levels of light transmission (13%, 25%, and 50%) allow you to choose the perfect filter for your viewing conditions
• Moon & Sky Glow filter provides high contrast views of the lunar surface and enhances observation of deep sky objects from light polluted skies
• Aluminum filter cells provide a rigid, durable housing for the filter glass and are threaded on top and bottom for stacking
• Kit includes a plastic carrying case with Moon map and legend for identifying the most popular lunar features

In this kit, you will receive:

• Three neutral density (ND) filters: ND96-0.9 13% T, ND96-0.6 25% T, and ND96-0.3 50% T - These filters dim the entire visual spectrum from 400-700nm equally. The ND96-0.9 filter transmits 13% of the incoming light, the ND96-0.6 transmits 25% and the ND96-0.3 transmits 50%. They do not impart any color to the Moon, but reduce lunar brightness. With several ND filters to choose from, you can find just the right level of light transmission for the Moon depending on its phase, the aperture of your telescope, and the magnification of your eyepiece. ND filters can also be used reduce the glare from Venus to better see its crescent phases, and to help dim bright daytime views when using a telescope terrestrially.
• A Moon & Sky Glow filter - This filter selectively reduces light transmission at different wavelengths and greatly improves contrast for observing subtle lunar features. This filter imparts a very light purple color to the Moon. For those in light-polluted skies, the Moon & Sky Glow filter provides some contrast enhancement when viewing deep sky objects due to the filter blocking some wavelengths associated with common forms of light pollution, e.g. low-pressure sodium (LPS) street lights.
• A durable plastic carrying case - The Moon Filter Set comes with a foam-lined plastic case to store all four filters when they are not in use and protect them during transit.
• Moon map and legend - Familiarize yourself with the Moon, our neighboring world with the help of our handheld Moon map. The Moon map comes complete with a legend highlighting 17 key features to explore including Sea of Tranquility, Tycho, Plato, Copernicus and many more.

Housing

Each filter is housed in an aluminum cell, providing a rigid, durable frame for the filter glass. The filters thread onto Celestron 1.25" eyepieces and most other 1.25" eyepieces with a standard filter thread. The filters have threads on the top and bottom to stack with other filters for even more light filtration options.

Explore the Moon

Your Moon Filter Set also includes a free download of Robert Reeves' eBook, Lunar Landscapes, which goes into fascinating detail about the sizes of craters, how marias are formed, the natural history of the Moon, and more.

8100-4 SK Gen 4 8100 battery operated SIDEKick INCLDES LIGHTHEAD, RECHARGABLE BATTERY, CASE, CHARGER by Western Technology

Shine a light on the darkest of work site conditions with the STRIKER™| Incandescent Explosion Proof String Lights is designed to provide an effective lighting solution for operators requiring a versatile source of illumination. The long handle configuration is perfect for hand-held inspection use in hazardous locations and confined spaces. The short handle configuration, dome diffuser & hook mount converts this explosion proof light into an incandescent drop light. Replaceable blast lenses, overspray protection bags and stanchions are available. The STRIKER™ could also be used as a blast light with our mounting variations or a string light with our new product, The Connector! The STRIKER&trade was designed to meet an incredible variety of applications. This work light is quickly becoming the go-to tool for industrial job sites worldwide. Part of our KICK-IT TOUGH™ LED Safety Lights!

The STRIKER™ is certified and approved for hazardous locations (HazLoc):

• Class I, Div 1 & 2, Groups C & D;
• Class II, Div 1 & 2, Groups E, F, & G
• CSA Zones 1 & 2; Zones 20,21 & 22
• Portable Luminaire (UL 153)
• Wet Location
• Low Voltage (LVLE)

72-6CBE-C-50 GX-6000 Sample Draw Gas Monitor, LEL/Oxy/H2S/VOC(0-6K ppm 10.6 eV)/CO2(10k ppm), with Li-ion batt/AC charger/Small padded case by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

Single Gas Clip

The Single Gas Clip is one of the most advanced portable disposable personal gas monitoring systems in the world. Thanks to Gas Clip Technologies dedication to customer focused designs, the single gas clip has many user friendly features to improve reliability and convenience. The low-maintenance device performs a variety of automatic functions while protecting the user with its unmatched sensor technology. Continuing with its tradition of durable and reliable products, Gas Clip Technologies has produced one of the best single gas monitoring systems on the market.

Single Gas Clip Features

The Single Gas Clip includes numerous features to enhance user experience and reduce maintenance. One such feature is the automatic testing. The clip performs a full function self test at every activation. The same test is also performed every 20 hours. The self test will notify users if there and operability or functional problems with the device. The monitor will also notify users when it is time to perform a bump check. For the reminder, an icon will flash across the screen when the unit is powered on, and a TEST icon will stay fixed at the top of the screen until the user has performed the bump test.

In addition to the testing and reminding features, the Single Gas Clip also includes

• Bump check and calibration identification and confirmation
• User adjustable alarm specifications
• Real-time gas readings or time display capabilities
• A 50% larger battery capacity that competitors
• Docking capabilities with the Gas Clip Technologies Clip Dock
• Infrared communication technology for downloads, configurations, tests, and updates
• Personal 6 digit identification codes

Rugged and Extra Tough

From the hottest to the coldest climates, the Single Gas Clip is designed to withstand the elements. The ergonomically designed casing can withstand accidental drops and common worksite abuse. Its bright yellow outer coating is an added feature intended to be recognizable and distinguishable in the workplace. This helps to reduce the possibility that a user may leave the unit behind instead of bringing it with him. While the outer casing is built to last and can withstand the harshest environments, the entire unit is cost efficient and disposable at the end of its life.

Single Gas Clip Specifications

The portable disposal handheld unit is compact and lightweight. It has dimensions of 3.37 x 1.97 x 1.15 inches and weighs less than 3 ounces. The unit is cased in a durable hard outer casing to protect the internal circuitry. The unit is operable in a wide range of temperatures (generally about -40 to +122 degrees Fahrenheit) and humidity (5% to 95% non-condensing relative humidity). The unit features a triple alarm system with bright visual alarms, a very loud audible alarm at 95 decibels, and a vibrating alarm. This helps to ensure that despite the environmental conditions (loud worksite, bright worksite, hearing protection equipment, etc.) the user can be immediately notified of prospective dangers. Each Single Gas Clip comes with a 2 year warranty (from date of activation) and a 1 year shelf life.