myron l.html

PT4 Ultrapen PT4 Free Chlorine Equivalent (FC^E) and Temperature Pocket Tester Pen by Myron L

ULTRAPEN™ PT4 is Myron L Company s ground breaking, new Pocket Tester for measuring Free Chlorine Disinfecting Power, Free Chlorine Equivalent (FCE), as well as Temperature. It is waterproof and designed to be extremely accurate, fast, and simple to use in diverse water quality applications.

Includes:

• Battery installed
• Soaker cap
• Scoop
• Pocket Clip
• Holster
• Lanyard
• ORP Electrode Cleaning Paper
• Operating instructions

Features:

• Accuracy of up to ±0.3 ppm FC^E
• Proprietary Sensor Design
• Calibration with pH and ORP Standard Solutions
• Automatic Temperature Compensation
• Temperature Readout
• Waterproof
• Powerd by one N Type Battery (included)

Applications:

• Agriculture
• Hydroponics
• Aquaculture
• Pharmaceutical
• Boilers and Cooling Towers
• Horticulture
• Wastewater
• Food and Beverage
• Irrigation
• Reverse Osmosis
• Plus Many More

NEW! FCE Free Available Chlorine (FAC) Function

The Myron L Company FCE function reports FAC quickly and accurately by measuring ORP, the chemical characteristic of chlorine that directly reflects its effectivity, cross referenced with pH. Both DPD kits and colorimeters may tell the user the FAC value of the sample in the test tube, but since the chemistry of that sample is quite different from the source water being analyzed, the results are imprecisely related to actual disinfection power. The Myron L Company FCE function measures the real, unaltered chemistry of source water, including moment-to-moment changes in that chemistry.

512M5 DS Conductivity Meter: 0-5000 AμM/AμS by Myron L

READINGS YOU CAN COUNT ON

No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life.

Myron L Company has two proven ways to measure such impurities. Our DS Meters provide fast, accurate, on-the-spot measurement of total dissolved solids (TDS) or conductivity. pDS Meters test conductivity or TDS, plus pH. Readings from their highly stable circuitry help prevent equipment damage, assure product quality, and verify in-line instrumentation in a wide range of applications.

RELIABILITY BUILT IN

Breakage is one of the major causes of sensor failure in a typical pH or conductivity instrument. Myron L instruments provide maximum protection for both the pH and conductivity electrodes inside the cell cup. The userreplaceable pH electrode features a chemical resistant, liquid junction.

UNIQUE FIELD-TESTED DESIGN

Our unique, durable, field-tested design has evolved over more than 40 years, making Myron L instruments among the most reliable and popular of their kind in the world.

They're lightweight and compact, Yet Myron L's DS and pDS Meters are also tough, with rugged, taut-band meter movements.

Put our meters to the test. Even after years of rough field service, they'll surpass your expectations of accurate, reliable readings.

APPLICATIONS

• Boilers
• Cooling towers
• Deionization
• Reverse osmosis
• Chemical concentrations
• Printing fountain solutions
• Swimming pools
• Water pollution control
• Wastewater

TPH1 TechPro II Conductivity/TDS/pH Meter by Myron L

MEASUREMENTS YOU CAN COUNT ON

Obtain reliable and accurate measurements of your water source with the value-priced TechPro II™. Ideal for water treatment testing as well as other industrial and commercial applications, these instruments reflect Myron L's 40-plus years experience designing and building quality conductivity, TDS and pH measuring instrumentation.

PORTABLE & EASY TO USE

The TechPro II is handheld, lightweight and simple to operate. Measuring conductivity, TDS, pH and temperature, the highly stable circuitry delivers the accurate readings needed to assure product quality, prevent equipment damage or verify in-line instrumentation in a wide range of applications. The TPH1 is designed with an internal pH sensor to prevent breakage and prolong the sensor's useful life. The rugged, waterproof case on both models protects the electronics of the instrument and fits comfortably in your hand. This model also features auto shutoff to prolong battery life.

Industrial and commercial users all over the world rely on Myron L's proven quality instruments for their water measurement needs.

FEATURES

• Waterproof & Buoyant
• Keypad Calibration
• 0 - 20,000 μS / ppm
• 0 - 14 pH
• Long Life Internal Electrodes
• Full 4 Digit Display
• Auto Temperature Compensation to 25°C/77°F
• User Friendly

APPLICATIONS

• Boilers & Cooling Towers
• Reverse Osmosis
• Fountain Solutions
• Swimming Pools & Spas
• Plating and Parts Washing
• Pulp and Paper
• Plus many more!

EP-10 DS Conductivity Meter: 0-10, 100, 1000, 10,000 AμM/AμS by Myron L

READINGS YOU CAN COUNT ON

No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life.

Myron L Company has two proven ways to measure such impurities. Our DS Meters provide fast, accurate, on-the-spot measurement of total dissolved solids (TDS) or conductivity. pDS Meters test conductivity or TDS, plus pH. Readings from their highly stable circuitry help prevent equipment damage, assure product quality, and verify in-line instrumentation in a wide range of applications.

RELIABILITY BUILT IN

Breakage is one of the major causes of sensor failure in a typical pH or conductivity instrument. Myron L instruments provide maximum protection for both the pH and conductivity electrodes inside the cell cup. The userreplaceable pH electrode features a chemical resistant, liquid junction.

UNIQUE FIELD-TESTED DESIGN

Our unique, durable, field-tested design has evolved over more than 40 years, making Myron L instruments among the most reliable and popular of their kind in the world.

They're lightweight and compact, Yet Myron L's DS and pDS Meters are also tough, with rugged, taut-band meter movements.

Put our meters to the test. Even after years of rough field service, they'll surpass your expectations of accurate, reliable readings.

APPLICATIONS

• Boilers
• Cooling towers
• Deionization
• Reverse osmosis
• Chemical concentrations
• Printing fountain solutions
• Swimming pools
• Water pollution control
• Wastewater

EP DS Conductivity/Resistivity Meter: 0-0.5, 5, 50, 500, 5000 AμM/AμS; 2-30 MI by Myron L

READINGS YOU CAN COUNT ON

No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life.

Myron L Company has two proven ways to measure such impurities. Our DS Meters provide fast, accurate, on-the-spot measurement of total dissolved solids (TDS) or conductivity. pDS Meters test conductivity or TDS, plus pH. Readings from their highly stable circuitry help prevent equipment damage, assure product quality, and verify in-line instrumentation in a wide range of applications.

RELIABILITY BUILT IN

Breakage is one of the major causes of sensor failure in a typical pH or conductivity instrument. Myron L instruments provide maximum protection for both the pH and conductivity electrodes inside the cell cup. The userreplaceable pH electrode features a chemical resistant, liquid junction.

UNIQUE FIELD-TESTED DESIGN

Our unique, durable, field-tested design has evolved over more than 40 years, making Myron L instruments among the most reliable and popular of their kind in the world.

They're lightweight and compact, Yet Myron L's DS and pDS Meters are also tough, with rugged, taut-band meter movements.

Put our meters to the test. Even after years of rough field service, they'll surpass your expectations of accurate, reliable readings.

APPLICATIONS

• Boilers
• Cooling towers
• Deionization
• Reverse osmosis
• Chemical concentrations
• Printing fountain solutions
• Swimming pools
• Water pollution control
• Wastewater

6PIIFCE Conductivity/pH/ORP/TDS/Temperature/Resistivity Meter by Myron L

Since 1957, the Myron L® Company has designed and manufactured highly reliable analytical instruments for a wide variety of applications. Thousands of professionals around the world rely every day on the performance of our instruments. Demanding uses range from boiler water testing to ultrapure water control to medical instruments for artificial kidney machines.

We are proud of the trust our handheld instruments and monitor/controllers have earned in the past. Our product line has evolved to a new level of outstanding performance and value in analytical instruments: the Ultrameter II series. While priced like affordable single parameter instruments, the Ultrameter II does the job of three, four or even six instruments.

NEW! FC^E FAC Function

The Myron L® Company FC^E function reports FAC quickly and accurately by measuring ORP, the chemical characteristic of chlorine that directly reflects its effectivity, cross referenced with pH. Both DPD kits and colorimeters may tell the user the FAC value of the sample in the test tube, but since the chemistry of that sample is quite different from the source water being analyzed, the results are imprecisely related to actual disinfection power. The Myron L® Company FC^E function measures the real, unaltered chemistry of source water, including moment-to-moment changes in that chemistry.

Accuracy You Can Trust

Both Ultrameter II models deliver performance of ±1% of reading (not merely full scale). This high level of accuracy has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORP sensor and powerful microprocessor-based circuitry. With displayed values of up to 9999, the full four-digit LCD ensures resolution levels never before possible in such affordable instruments. Factory calibrated with NIST traceable solutions, each Ultrameter II may be supplied with both certification of traceability and NIST traceable solutions for definitive calibration.

Innovative Engineering

The Ultrameter II is a prime example of how high-tech engineering can greatly simplify and streamline a task. Whether in the lab, industrial plant, or in a remote field location, merely:

• Fill the cell cup
• Push a parameter key
• Take the reading

Temperature compensation and range selection are both rapid and automatic. The Ultrameter II is a true onehand operation instrument.

Easy to Calibrate

All calibrations are quickly accomplished by pressing the ▲ or ▼ keys to agree with our NIST traceable Standard Solution. When calibration is necessary, display prompts simplify pH calibration and make sure the correct buffer is being used. Plus, all parameters (excluding factory-set temperature) have an internal electronic setting that can be used for field calibration and as a check on pH/ORP sensor life.

Features

• Choice of KCl, NaCl, and 442™ Natural Water Standards
• ORP mV to ppm free chlorine conversion (6PFC^E)
• pH/ORP Sensor protective cap (6PFC^E)
• Four-digit display for full 9999 readings, with autoranging capability up to 200 mS/200 ppt
• Powerful microprocessor based surface-mount circuitry
• Display prompts for simple pH calibration
• Real Time Clock
• Memory for 100 readings with Date & Time Stamp
• Factory calibrations stored in microprocessor

Advanced Features

• 3 solution standards for greatest accuracy in diverse applications
• Fully automatic temperature compensation
• User adjustable temperature compensation (up to 9.99%/°C) which also allows TC to be disabled for applications requiring non-compensated readings.
• User adjustable conductivity/TDS conversion ratio for greater accuracy when measuring solutions not contained in the microprocessor.
• Auto-shutoff maximizes the life of the single 9V battery to more than 100 hours/5000 tests.
• Non-volatile microprocessor provides data back-up, even when the battery is changed. This assures all calibrations and memory data will be retained.
• Extended life pH/ORP sensor is user replaceable in the field.

Multiple Applications

• Irrigation Water
• Hydroponics
• Laboratories
• Wastewater
• Reverse Osmosis
• Deionization
• Cooling Towers
• Environmental
• Desalination
• Fountain Solutions
• Homeland Security

4PII Conductivity/TDS/Temperature/Resistivity Meter by Myron L

Since 1957, the Myron L® Company has designed and manufactured highly reliable analytical instruments for a wide variety of applications. Thousands of professionals around the world rely every day on the performance of our instruments. Demanding uses range from boiler water testing to ultrapure water control to medical instruments for artificial kidney machines.

We are proud of the trust our handheld instruments and monitor/controllers have earned in the past. Our product line has evolved to a new level of outstanding performance and value in analytical instruments: the Ultrameter II series. While priced like affordable single parameter instruments, the Ultrameter II does the job of three, four or even six instruments.

NEW! FC^E FAC Function

The Myron L® Company FC^E function reports FAC quickly and accurately by measuring ORP, the chemical characteristic of chlorine that directly reflects its effectivity, cross referenced with pH. Both DPD kits and colorimeters may tell the user the FAC value of the sample in the test tube, but since the chemistry of that sample is quite different from the source water being analyzed, the results are imprecisely related to actual disinfection power. The Myron L® Company FC^E function measures the real, unaltered chemistry of source water, including moment-to-moment changes in that chemistry.

Accuracy You Can Trust

Both Ultrameter II models deliver performance of ±1% of reading (not merely full scale). This high level of accuracy has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORP sensor and powerful microprocessor-based circuitry. With displayed values of up to 9999, the full four-digit LCD ensures resolution levels never before possible in such affordable instruments. Factory calibrated with NIST traceable solutions, each Ultrameter II may be supplied with both certification of traceability and NIST traceable solutions for definitive calibration.

Innovative Engineering

The Ultrameter II is a prime example of how high-tech engineering can greatly simplify and streamline a task. Whether in the lab, industrial plant, or in a remote field location, merely:

• Fill the cell cup
• Push a parameter key
• Take the reading

Temperature compensation and range selection are both rapid and automatic. The Ultrameter II is a true onehand operation instrument.

Easy to Calibrate

All calibrations are quickly accomplished by pressing the ▲ or ▼ keys to agree with our NIST traceable Standard Solution. When calibration is necessary, display prompts simplify pH calibration and make sure the correct buffer is being used. Plus, all parameters (excluding factory-set temperature) have an internal electronic setting that can be used for field calibration and as a check on pH/ORP sensor life.

Features

• Choice of KCl, NaCl, and 442™ Natural Water Standards
• ORP mV to ppm free chlorine conversion (6PFC^E)
• pH/ORP Sensor protective cap (6PFC^E)
• Four-digit display for full 9999 readings, with autoranging capability up to 200 mS/200 ppt
• Powerful microprocessor based surface-mount circuitry
• Display prompts for simple pH calibration
• Real Time Clock
• Memory for 100 readings with Date & Time Stamp
• Factory calibrations stored in microprocessor

Advanced Features

• 3 solution standards for greatest accuracy in diverse applications
• Fully automatic temperature compensation
• User adjustable temperature compensation (up to 9.99%/°C) which also allows TC to be disabled for applications requiring non-compensated readings.
• User adjustable conductivity/TDS conversion ratio for greater accuracy when measuring solutions not contained in the microprocessor.
• Auto-shutoff maximizes the life of the single 9V battery to more than 100 hours/5000 tests.
• Non-volatile microprocessor provides data back-up, even when the battery is changed. This assures all calibrations and memory data will be retained.
• Extended life pH/ORP sensor is user replaceable in the field.

Multiple Applications

• Irrigation Water
• Hydroponics
• Laboratories
• Wastewater
• Reverse Osmosis
• Deionization
• Cooling Towers
• Environmental
• Desalination
• Fountain Solutions
• Homeland Security

512M4 DS Conductivity Meter: 0-2500 AμM/AμS by Myron L

READINGS YOU CAN COUNT ON

No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life.

Myron L Company has two proven ways to measure such impurities. Our DS Meters provide fast, accurate, on-the-spot measurement of total dissolved solids (TDS) or conductivity. pDS Meters test conductivity or TDS, plus pH. Readings from their highly stable circuitry help prevent equipment damage, assure product quality, and verify in-line instrumentation in a wide range of applications.

RELIABILITY BUILT IN

Breakage is one of the major causes of sensor failure in a typical pH or conductivity instrument. Myron L instruments provide maximum protection for both the pH and conductivity electrodes inside the cell cup. The userreplaceable pH electrode features a chemical resistant, liquid junction.

UNIQUE FIELD-TESTED DESIGN

Our unique, durable, field-tested design has evolved over more than 40 years, making Myron L instruments among the most reliable and popular of their kind in the world.

They're lightweight and compact, Yet Myron L's DS and pDS Meters are also tough, with rugged, taut-band meter movements.

Put our meters to the test. Even after years of rough field service, they'll surpass your expectations of accurate, reliable readings.

APPLICATIONS

• Boilers
• Cooling towers
• Deionization
• Reverse osmosis
• Chemical concentrations
• Printing fountain solutions
• Swimming pools
• Water pollution control
• Wastewater

TP1 TechPro II Conductivity/TDS Meter by Myron L

MEASUREMENTS YOU CAN COUNT ON

Obtain reliable and accurate measurements of your water source with the value-priced TechPro II™. Ideal for water treatment testing as well as other industrial and commercial applications, these instruments reflect Myron L's 40-plus years experience designing and building quality conductivity, TDS and pH measuring instrumentation.

PORTABLE & EASY TO USE

The TechPro II is handheld, lightweight and simple to operate. Measuring conductivity, TDS, pH and temperature, the highly stable circuitry delivers the accurate readings needed to assure product quality, prevent equipment damage or verify in-line instrumentation in a wide range of applications. The TPH1 is designed with an internal pH sensor to prevent breakage and prolong the sensor's useful life. The rugged, waterproof case on both models protects the electronics of the instrument and fits comfortably in your hand. This model also features auto shutoff to prolong battery life.

Industrial and commercial users all over the world rely on Myron L's proven quality instruments for their water measurement needs.

FEATURES

• Waterproof & Buoyant
• Keypad Calibration
• 0 - 20,000 μS / ppm
• 0 - 14 pH
• Long Life Internal Electrodes
• Full 4 Digit Display
• Auto Temperature Compensation to 25°C/77°F
• User Friendly

APPLICATIONS

• Boilers & Cooling Towers
• Reverse Osmosis
• Fountain Solutions
• Swimming Pools & Spas
• Plating and Parts Washing
• Pulp and Paper
• Plus many more!

UCC Case (Soft) for Myron L Digital Meters by AquaPhoenix

Soft protective, nylon padded case with zipper and belt clip for Myron L digital meters.

EP11/PH Myron L pDS pH/Conductivity Meter by AquaPhoenix

0-10, 100, 1000, 10000 μS
2-12 pH

Myron L DS Meters provide fast, accurate, on-the-spot measurements of total dissolved solids (TDS) or conductivity. pDS Meters™ test conductivity or TDS, plus pH. Readings from their highly stable circuitry help assure product quality, prevent equipment damage and verify in-line instrumentation in a wide range of applications.

PT1 Ultrapen PT1 Conductivity, TDS, Salinity, Temperature Pocket Tester Pen by Myron L

This instrument is designed to be extremely accurate, fast and simple to use in diverse water quality applications. Advanced features include the ability to select from 3 different solution types that model the characteristics of the most commonly encountered types of water; proprietary temperature compensation and TDS conversion algorithms; highly stable microprocessor-based circuitry; user-intuitive design; and waterproof housing. A true, one-handed instrument, the PT1 is easy to calibrate and easy to use. To take a measurement, you simply press a button then dip the pen in solution. Results display in seconds.

Includes:

• Battery installed
• Scoop
• Pocket Clip
• Holster
• Lanyard
• Operating instructions

Features:

• Accuracy of ±1% of READING ±.2% at calibration point
• Reliable Repeatable Results
• Automatic temperature compensation
• Autoranging
• Accuracy of benchtop lab equipment in an affordable, portable, compact pen
• Rugged, reliable, shock-resistant fully encapsulated electronics, body constructed of aircraft aluminum
• Simple one button function
• Specially designed with measurement ranges and solution modes to meet the water quality testing needs of many applications
• High capacity N-type battery included
• Waterproof

Applications:

• Agriculture
• Hydroponics
• Desalination
• Aquaculture
• Pharmaceutical
• Boilers and Cooling Towers
• Fountain Solutions for Printing
• Horticulture
• Wastewater
• Pool and Spa
• Food and Beverage
• Irrigation
• Reverse Osmosis

PT2 Ultrapen PT2 pH and Temperature Pocket Tester Pen by Myron L

This instrument is designed to be extremely accurate, fast and simple to use in diverse water quality applications. Advanced features include automatic temperature compensation; highly stable microprocessor-based circuitry; user-intuitive design; and waterproof housing. A true one-handed instrument, the PT2 is easy to calibrate and easy to use. To take a measurement, you simply push a button then dip the pen in solution. Results display in seconds.

Includes:

• Battery installed
• Soaker cap
• Scoop
• Pocket Clip
• Holster
• Lanyard
• Operating instructions

Features:

• Accuracy of ±0.01 pH
• 1, 2 and 3 Point Calibration
• Proprietary Sensor Design
• Automatic temperature compensation
• Reliable Repeatable Results
• Rugged, reliable, shock-resistant fully encapsulated electronics
• Durable body constructed of aircraft aluminum
• Simple one button function
• High capacity N-type battery included
• Waterproof

Applications:

• Agriculture
• Hydroponics
• Desalination
• Aquaculture
• Pharmaceutical
• Boilers and Cooling Towers
• Fountain Solutions for Printing
• Horticulture
• Wastewater
• Pool and Spa
• Food and Beverage
• Irrigation
• Reverse Osmosis
• Plus Many More

PT3 Ultrapen PT3 ORP (REDOX) and Temperature Pocket Tester Pen by Myron L

This instrument is designed to be extremely accurate, fast, and simple to use in diverse water quality applications. Advanced features include highly stable microprocessor-based circuitry; automatic temperature compensation from 15ºC to 30ºC while in calibration mode; user-intuitive design; and waterproof housing. A true one-handed instrument, the PT3 is easy to calibrate and easy to use. To take a measurement, you simply push a button then dip the PT3 in solution. Results display in seconds.

Includes:

• Battery installed
• Soaker cap
• Scoop
• Pocket Clip
• Holster
• Lanyard
• ORP Electrode Cleaning Paper
• Operating instructions

Features:

• Accuracy of ±10 mV ORP
• Proprietary Sensor Design
• 99.9% Pure Platinum Electrode
• 3 Calibration Options with Automatic Solution Recognition
• Automatic Temperature Compensation in Calibration Mode
• Rugged, reliable, shock-resistant fully encapsulated electronics
• Durable body constructed of aircraft aluminum
• Simple one-button functions
• Temperature Readout
• High capacity N-type battery included
• Waterproof

Applications:

• Agriculture
• Hydroponics
• Desalination
• Aquaculture
• Pharmaceutical
• Boilers and Cooling Towers
• Fountain Solutions for Printing
• Horticulture
• Wastewater
• Pool and Spa
• Food and Beverage
• Irrigation
• Reverse Osmosis
• Plus Many More

512T5 DS TDS Meter: 0-5000 ppm by Myron L

READINGS YOU CAN COUNT ON

No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life.

Myron L Company has two proven ways to measure such impurities. Our DS Meters provide fast, accurate, on-the-spot measurement of total dissolved solids (TDS) or conductivity. pDS Meters test conductivity or TDS, plus pH. Readings from their highly stable circuitry help prevent equipment damage, assure product quality, and verify in-line instrumentation in a wide range of applications.

RELIABILITY BUILT IN

Breakage is one of the major causes of sensor failure in a typical pH or conductivity instrument. Myron L instruments provide maximum protection for both the pH and conductivity electrodes inside the cell cup. The userreplaceable pH electrode features a chemical resistant, liquid junction.

UNIQUE FIELD-TESTED DESIGN

Our unique, durable, field-tested design has evolved over more than 40 years, making Myron L instruments among the most reliable and popular of their kind in the world.

They're lightweight and compact, Yet Myron L's DS and pDS Meters are also tough, with rugged, taut-band meter movements.

Put our meters to the test. Even after years of rough field service, they'll surpass your expectations of accurate, reliable readings.

APPLICATIONS

• Boilers
• Cooling towers
• Deionization
• Reverse osmosis
• Chemical concentrations
• Printing fountain solutions
• Swimming pools
• Water pollution control
• Wastewater