bwtegasmo gasalertquattro gasalertquattro confined space kits.html

Part Number: DOCK201N00G

Part Number: GAVM2

Part Number: QTLCDK1

Part Number: QTFC1B

Part Number: GAMAXCKDL

Gas Alert Quattro Multi Gas Monitor by BW Technologies

What it does

• Multi gas monitor that detects 1 to 4 of the following gases: CO (Carbon Monoxide), H2S (Hydrogen Sulfide), O2 (Oxygen), LEL (Combustible gases including Methane).

• Large LCD screen for easy visual readout
• Rubberized housing to withstand drops
• Real time gas concentrations with auto backlight in low light conditions
• Instantaneous Low and High Alarms
• TWA (Time Weighted Average) and STEL (Short Term Exposure Limits) alarms
• Three alarms for added safety. Bright Red Visual alarm, loud audible buzzer, and vibrating alarm
• Available in rechargeable or alkaline versions
• Fast one button calibration that only takes 120 seconds
• Sure cell sensors for accurate readings and fast response to gas hazards

Is the Gas Alert Quattro the right monitor for me?

What are the Differences between the discontinued Gas Alert Micro and the new Gas Alert Quattro?

Sampling Options

Flexible Power Options

Calibration

Part Number: QTXWHMABNA

Part Number: DOCK201C1N00G

72-RA-D-58 GX-3R Confined Space Kit, LEL/Oxy/H2S/CO, pump with 10 ft hose and probe by RKI Instruments

OSHA defines the breathing zone as a ten inch radius around the worker's nose and mouth, and requires that worker exposure monitoring air samples be collected in the breathing zone. Air sampling filters may be attached to the collar or lapel. Traditionally this means only a single gas monitor would be small enough for a worker to practically wear a gas monitor 'In the breathing zone'. Now there is a 4 gas monitor smaller than many single gas monitors.

The GX-3R is the worlds smallest 4 gas monitor weighing only 3.52 ounces and can comfortably be clipped within a worker's breathing zone (2.2" W x 2.55" H x 1.02" D). It simultaneously monitors and displays LEL combustibles, O₂, CO (Hydrogen compensated CO also available), and H₂S.

The GX-3R represents the latest evolution of gas detection technology utilizing a new generation of micro sensors. The LEL sensor has a unique design with two active filaments in one sensor to increase it's resistance to silicone poisoning. If one filament gets poisoned the second filament takes over. The new O₂ sensor is electrochemical with a 3 to 5 year life span. H₂S and CO are now available in a combo micro sensor.

Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it's 3 LED lights every 30 seconds in the following conditions; if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The 30 second interval is adjustable.

Features

• Smallest & lightest 4 gas monitor: 2.2" W x 2.55" H x 1.02" D, 3.52 ounces
• Simultaneous detection of 4 gases: LEL, O2, H2S & CO; H2 Compensated CO sensor available
• Simple 2-button operation
• Non-Compliance Indicator
• Alarms: audible, visual, & vibration
• 3 user adjustable alarm levels
• Impact resistant body with removable rubber boot
• Large LCD Auto-backlit display
• 25 hours of operation (Lithium-ion battery)
• Field replaceable sensors & filters
• Water and dust resistant design, IP66/68
• Stealth mode for law enforcement
• 3 Year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries/petrochemical
• Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction

*Please note we can only ship RKI products to customers within the United States

MicroMax Pro Serviceable Multigas Portable

The MicroMAX Pro is the best microprocessor controlled multi-gas monitor on the market today. It s the only monitor that has it all easy to use, reliable, highest quality, economical, lightweight, shortest response time, built-in data logging, lifetime warranty* and now includes our newest innovation...

Since worker safety is our business, Lumidor continually strives to improve its gas detector product line, and has done so with the addition of the voice message feature. Four languages (English, French, German and Spanish) are included with each monitor - just select the desired language. Every function, when activated, is accompanied with a voice message. Everything from immediate warnings to simple on and off functions are communicated verbally to the user. This feature is also very valuable in poorly lit situations. And, the language displayed on the new 4-line display is the same as the one selected for the voice.

The MicroMAX Pro is designed to provide the ultimate in personal safety. It s OSHA compliant, and has a rugged case that provides superior RFI/EMI shielding, as well as dust, water and impact resistance. Additionally, it is designed, tested and manufactured under strict ISO 9001 standards, and is UL classified for use in Class I, II, III Division I, Groups A, B, C, D, E, F, G.

The MicroMAX Pro combines diffusion and built-in internal sampling pump systems for simultaneously monitoring 1 - 5 gases. The popular internal pump allows for easy pre-testing in confined spaces and provides almost instantaneous readings of gas concentrations. In order to save power, the pump can be switched off and the diffusion mode will take over.

The MicroMAX Pro has preset and field selectable alarms. Both audible and visual alarms warn the user if the oxygen levels are either too low or enriched, combustible gas is present or toxic gas levels are too high. The toxic gas alarms can be easily adjusted in the field from immediate to TWA. And, alarms are also activated in case of sensor failure, low battery voltage, pump blockage or low air flow.

Our unique microprocessor design allows for self diagnostics with each start up. The MicroMAX Pro internally data logs individual channel alarms, TWA averaging and peak information. With a push of the Mode button you can review information, as well as customize user settings or initiate calibration.

All stored information is available for display, and meets OSHA documentation for employee awareness programs by simply downloading to a standard Windows™-compatible PC with Lumidor s MPRO-DATALOG software.

Calibration is easier than ever before-it s all automatic-no tools, screws or stopwatch required. Simply place in calibration Mode , introduce calibration gas and wait for voice/display indicating calibration is complete!-A NiMH rechargeable battery pack and 4-hour charger are now included with each monitor.

Included Accessories

• Rubber boot with shoulder strap
• Rechargeable NiMH battery pack with 4-hour charger
• Dust filter
• Alkaline battery holder 10 sampling hose with water trap and particulate filter
• MPRO-DATALOG Windows™ 95/98 compatible data logging software and interface cable

Optional Accessories

• External vibrator alarm
• External earphone alarm
• Leather carrying case
• DC-to-DC vehicle charging adapter
• Aluminum or fiberglass search probes
• High-impact carrying case
• Calibration gases Bump test gases
• Confined space kits

Version 5.0 upgrade

• Up to 24 calibration records stored in unit for later download
• Calibration history reports generated
• Compatibility with most Windows™ platforms
• Easier, more functional, user interface with enhanced menus, toolbar, screen displays and calibration dialog

Part Number: SR-W04-75

VN00136 X-am 8000 Multi-Gas Detector, PID-HC, LEL, CO-LC, O2, H2S-LC by Draeger

Clearance measurement was never this easy and convenient: The 1 to 7 gas detector detects toxic and flammable gases as well as vapors and oxygen all at once – either in pump or diffusion mode. Innovative signaling design and handy assistant functions ensure complete safety throughout the process.

Multi-gas detector

• 1- to 7 gas detection device
• for clearance measurement
• detection of toxic and combustible gases as well as vapors and oxygen

Specially designed for use with a pump, optimized for clearance measurement

The Draeger X-am® 8000 is equipped with a very powerful pump. It can be connected with hoses of up to 45 meters in length. A pump adapter makes it easy to switch between diffusion and pump mode at any time. This means the pump is only operated when you actually need it. That saves energy, reduces wear and tear, and extends the lifespan of the pump.

Handy and durable, the Draeger X-am® 8000 is intuitive to operate single-handedly using three function keys. The easy-to-read color display clearly lays out all the information for you.

The multi-gas detector also features advanced software functions including change of measurement gas for PID, CatEx and IR sensor during operation. This is based on an on-board library and a convenient assistant to hide unused sensor channels and adapt the flexible instrument to the measurement task.

Standard accessories include a sturdy shoulder strap so you can comfortably carry the X-am 8000. Thanks to its compact and robust construction, the device can withstand even the harshest conditions.

Clearance measurement, release and documentation in no time

The X-am 8000 effectively supports various applications with specially developed assistant functions that guide you through each process step by step. During clearance measurement, for example, the smart assistant calculates the necessary flooding time for the device and probe (FKM hose) based on parameters such as measuring gases, temperature limits, and the indicated hose length. Additionally, customer defined flooding times are also possible.

When monitoring for potentially high methane concentrations, an optional automatic measurement range switch makes it easier to take a reading: If the Cat-Ex sensor measures values above 100 % LEL, the display switches to the range of 0 to 100 vol %. A similar function to measure in % LEL and vol % simultaneously is also available for the IR EX ES sensor.

The DraegerSensor CatEx 125 PR Gas offers a special variant for the measuring gas methane, which enables measurements in the ppm range. The performance of selected sensors has been verified by an external approval body within the scope of the measurement performance approval (EN 60079-29-1) for combustible gases and vapors including methane, propane and n-nonane.

An additional useful tool is CSE Connect. It combines an app, specially designed for the X-am 8000, with a cloud-computing solution. Measuring jobs can be quickly and easily transferred to the app using an online application. An optional Bluetooth® module in the Draeger X-am 8000 enables measured values to be transferred automatically to the CSE Connect app. You can also easily and conveniently use the app to create measurement reports. This saves time and helps you manage your measuring tasks during clearance measurements more efficiently.

Clear signaling design

The signal system of the Draeger X-am 8000 is based on a clear color code, in accordance with the requirements of EN 60079-29-1, EN 45544-1 and EN 50104:

• Red light = gas alarm
• Yellow light = device-related alarm, e.g. low battery
• Green light = device is ready for use

The green glow of the D-Light allows you to see from a distance whether the device has been properly tested and is ready for use.

In case of an alarm, the X-am 8000 alerts you with colorful warning LEDs, a loud horn (100 dB(A) at a distance of 30 cm), and clearly palpable vibration. Optionally, four preset hazard symbols are available for the display which explicitly indicate the presence of explosive or toxic gas hazards, for example. This allows the user to easily recognize the type of hazard based purely on the symbol displayed.

The X-am 8000 is equipped with an impact detection system. The event report indicates whenever severe mechanical impacts have occurred that might result in functional impairments of the device or the sensors. These are also documented in the data logger. With this information, a device operator can specifically check the device. The instrument can also be locked after a detected impact as well.

Economical Fleet Management

Bumptest and calibration are carried out simply and quickly using the Draeger X-dock® calibrating station. Its low test gas consumption keeps operating costs to a minimum.

Its reporting function and numerous other useful features make the X-dock Manager PC software a smart addition to any fleet management operation. To identify devices in your fleet, you can either use tried and tested barcodes or an integrated RFID transponder.

Specialist for high and low hydrocarbon concentrations

To measure hard-to-detect hydrocarbons, you can fit the Draeger X-am 8000 with one of two high-performance PID sensors. The PID HC covers a measurement range of 0 to 2,000 ppm (isobutene). The PID LC ppb is particularly suited for a measurement range of 0 to 10 ppm (isobutene) with a high resolution in the range below 1 ppm.

For benzene-specific measurements, the X-am 8000 can be used with a pre-tube. The advantage: You only need one measuring device for this application, which significantly reduces the costs of purchasing, maintaining and transporting devices in use. The use of pre-tubes is supported by a built-in assistant.

Inductive charging protects against wear and tear

The X-am 8000 features inductive charging. This makes it easier to operate and increases the lifespan of the device. Issues like corrosion and contact problems in the charging cradle are a thing of the past. You can charge (outside of explosion-hazard zones) and measure at once, e.g, when using inside vehicles or on machinery.

The charging cradles can connect with one another, take up minimal space, and are compatible with existing Draeger X-am® series cradles.

Quattro (diffusion only – no internal pump)

The Quattro confined space kit (CSK) includes:

Part Number: QTXWHMAYNACS

Part Number: QTBC1

Part Number: QTBC1B

DOCK2-0-1C1N-00-N GasAlertQuattro Docking Module with Charging Cable by BW Technologies

The BW Technologies Docking Module with Charging Cable safely and efficiently docks your gas detection device after use. The docking module can also charge your equipment. When charging, an LED light indicates the charging status. The docking stations can also perform a variety of additional functions. Please be sure to check your equipment's specifications sheet to see which modules are compatible with your BW Technologies equipment.

Part Number: DOCK201C1N00N

GasAlertQuattro 3-Gas Detector %LEL, O2, H2S - Alkaline Version - Yellow

Gas Sensor SureCell Technology

Convenient Size and Design

Exclusive Safety Features

Unit Specifications

Part Number: QTXWH0AYNA

BW Technologies Short Strap

The BW Technologies Short Strap works to attach your portable gas detection instrument to your body or clothing. The durable and tough double loop design allows users to clip the device onto a number of buttons and fasteners. Used another way, the device can be tied to the strap and worn on your arm. This cost effective security solution improves the portability of the detector and helps to ensure that the detector may be placed effectively near the user's breathing zones.

Part Number: GALY1

BW Technologies Replacement Test Cap and Hose

The BW Technologies Replacement Test Cap and Hose allows users to easily and efficiently transfer gas to sensor ports for remote sampling, bump testing, and calibration processes. The hose is approximately 12 inches long. The test cap is made of a durable black plastic that situates firmly on the gas detection device. This replacement part is compatible with a variety of BW Technologies gas detectors.

Part Number: QTTC1

QT-00HM-R-Y-EU GasAlertQuattro 2-Gas Detector, H2S, CO, Rechargeable Version - Yellow Housing, EU Version (Europe) by BW Technologies

BW Technologies by Honeywell introduces an industry leader in design simplicity and user friendliness. The Gas Alert Quattro multigas detector is backed with years of research and development. The design pays particular attention to the needs of users when on the worksite, and eliminates unnecessary design elements that distract users and complicate equipment training. With this simple and easy to read gas detection system, safety managers can reduce training time and costs with confidence.

User Friendly Features

Alarms and Automatic Tests

Specifications & Compatible Accessories

BW Technologies by Honeywell

Part Number: QT00HMRYEU

GasAlertQuattro multi gas monitor by BW Technologies

After many years of intense research and development, BW Technologies by Honeywell introduces the state of the art Gas Alert Quattro Multigas Detector. BW Technologies aspires to be the world s leading supplier of gas detection equipment and consistently produces some of the world s greatest gas detection systems. This unit fits in perfectly with its previous designs and features an easy to operate and read user interface, intelligent flash system, and system durability. The simple portable design helps to reduce training time and costs while ensuring the highest standards of workplace safety.

One Button Operation and Easy to Read Display

The easy to use one button operation system is effective and cost efficient by reducing training costs and training time. The one button system is glove friendly and complemented by an easy to read user interface. The user interface provides intuitive constant readings of gas levels and battery status. The simple design is ideal for hazardous working conditions when users need to be aware of their environment and less concerned with complicated equipment. The easy to read user interface displays consistent and simultaneous readings of all gases, battery status, and sensor status. This information is displayed on a very easy to read display that is free of any distractors and unnecessary information.

Standard features

The IntelliFlash feature is one of the more unique aspects of the Gas Alert Quattro multigas detector. The easily identifiable illuminated indicator signals to users and those nearby that the detector is operational and functioning correctly. The top mounted flash system provides a steady and consistent green light signal at regular intervals during the time when the unit is operational. This feature eliminates the need for guesswork when in potentially hazardous working conditions.

Powered by SureCell Sensors

Utilizing the most advanced technology available, Honeywell s SureCell Sensor is a revolution in electrochemical technology. The patented cell technology is designed to detect a wide range of toxins while maintaining a resistance to common industrial gas interference errors. This focus on detection integrity improves sensor performance and reliability.

Rugged and Durable

This multigas detector was made with the high standards of durability in mind. The built in concussion proof boot protects the detector from regular every day hazards and accidental drops. The unit features durable bumpers to protect the internal circuitry and render the device resilient against abusive working conditions. As an added safety feature, the heavy-duty outer casing is dyed a vivid yellow hue. This reduces the likelihood that users might accidentally set down the device while on the workplace and walk away. The bright color is not likely to blend in to the background and acts as an additional safety feature for one of BW Technologies most intelligent gas detection designs.

Gas Alert Quattro Specifications

The Gas Alert Quattro Multigas Detector is portable (with dimensions of 5.1 x 3.2 x 1.9 inches) and lightweight (weighing less than 12 ounces). The device is also compatible with AA alkaline batteries of rechargeable battery packs. With alkaline batteries, users can expect approximately 14 hours of runtime, and with rechargeable batteries, users can expect between 18 and 20 hours. The Gas Alert Quattro is compatible with sensors for Hydrogen Sulfide, Carbon Monoxide, Oxygen, and Combustible gases at various detection and resolution ranges. The device and all of its sensors include a full two year warranty.

*Please note we can only ship RKI products to customers within the United States