Gasalert Extreme

Making portable single-gas detection convenient and accurate.

 

The next-generation in easy to operate and maintain gas detectors with a full line of sensors. Offering a replacement for the ToxiPro® and the GasAlert Extreme, the Honeywell BW™ Solo offers dependable, accuracy and reliability as well as: Workplace compliance Lower cost of lifetime ownership Wireless connectivity for workers Enhanced protection and safety

 

Practical, lightweight design

The smaller, compact design of the Honeywell BW™ Solo makes this a practical companion for any worker in any environment.

Low cost, long life, and easy service

Simplicity is the key design element in the Honeywell BW™ Solo. Changing a sensor filter is done through a pop off door in the front of the unit, and sensor and battery replacement is just as simple.

All the sensor you need for common and exotic gas

Used across all industries, including in steel manufacturing, petrochemical plants, and power plants, this sensor can detect:

• Ammonia (NH₃)
• Carbon monoxide (CO)
• Chlorine (Cl₂)
• Chlorine dioxide (ClO₂)
• Ethylene oxide (ETO)
• Hydrogen (H₂)
• Hydrogen sulfide (H₂S)
• Hydrogen cyanide (HCN)
• Nitrogen dioxide (NO₂)
• Nitrogen oxide (NO)
• Oxygen (O₂)
• Ozone (O₃)
• Phosphine (PH₃)
• Sulfur dioxide (SO₂)

 

The foremost single-gas detector to use the 1-Series sensor for increased performance, accuracy, and safety.

As a next-generation sensor, the 1-Series sensor is the optimal sensor in any environment, offering long life, top performance, and fast response.

Detecting CO, H₂S, and O₂ – with more to come

With a sensor that is about one-third the size of others in the industry, as well as a unique square shape, the design of the detector is small and compact. The square shape also allows faster gas diffusion for more rapid response times.

3-year warranty coupled with up to 5-year sensor life

For the lower cost of ownership, less downtime, and fewer sensor replacement requirements, the 1-Series sensor cannot be beaten. With typical gas exposure, the sensor lasts up to 5 years, and the 3-year warranty offers peace of mind.

Developed in-house.

Developed by Honeywell company City Technology, the 1-Series sensor has over 40 years of sensor expertise and experience behind its design. It is crafted with reliability and quality in mind, similar to the City Technology's 40xLL and the 40VX oxygen sensors in the Honeywell BW.

End nuisance alarms across environments.

The 1-Series sensor is tested to work in environments where high humidity, transient pressure, and temperatures from -40°C to 60°C are factors to consider. With proven accuracy in even the most demanding environments, these are the ideal sensors for any location.

Sensor switch-out without any risk of damage.

As a practical design feature, the 1-Series sensor allows for the replacement of sensors without any exposure to the printed circuit board, making the process easy and safe.

Add efficiency with centralized data and fleet management automation.

Combining the features of the Honeywell BW™ Solo, IntelliDox, and Honeywell SafetySuite Device Configurator software offers increased compliance, productivity, and safety.

The IntelliDox docking solution for automation

The IntelliDox dock allows you to connect the Honeywell BW™ Solo and complete a range of automated tasks, including data transfer, bump tests, changing set points for alarms, and completing calibration and bump reminders. It is also an ideal option for updating firmware. Using the fleet management software ensures that all peak readings, alarms, and required data can be quickly transmitted using USB or Ethernet.

Grouping up to five IntelliDox docks allows for individual detector operation with shared power and calibration gas. All docks come with a state-of-the-art LCD screen, pump, and keypad for easy operation.

Device Configurator software

The Windows-based Device Configurator software allows for export and viewing of data, configuration of the detector, and firmware updates all from your computer. This makes fleet management compliance, productivity, and safety much more manageable.

Added benefits with the cloud-based Honeywell SafetySuite Device Manager

Subscribing to the cloud-based technology offered by Honeywell SafetySuite Device Manager allows you to:

• See all detectors, alarms, and compliance status on one dashboard for quick identification of problems and gas events.
• Prepare reports.
• Store reports in a centralized location for easy retrieval for investigations and audits.
• Receive real-time alarm notifications via text or email.
• Add compliance features.

 

Increase convenience and operation simplicity with smartphone control of the Honeywell BW™ Solo. As a central part of the Connected Worker portfolio available through Honeywell, the wireless version increases convenience and safety.

Get the app to setup, configure, and verify.

For any worker with a smartphone, simply pairing the Honeywell BW™ Solo and using the Device Configurator app is an effective way to setup, configure and adjust all parameters of the detector, as well as complete firmware updates. The technology uses Bluetooth Low Energy (BLE) and can be operated from up to 6 meters away from the detector.

The app can review calibration and bump data, and even see who completed the calibration, when it was done, and the specific gas. This information can also be emailed in a certified to required stakeholders.

Connect without a docking station.

For larger fleets, using a smartphone app eliminates the need for the IntelliDox docking station. This allows easy sharing of data through the cost-effective app format.

Remote safety monitoring.

Knowing what is happening in real-time is important for safety managers, and the app allows this without the need to dock the detector. Data is sent through the Safety Communicator app to the real-time Honeywell monitoring software. Information is then available through any internet-connected device for worker location and safety.

Operational ease for increased compliance throughout the workplace.

 

Single-button control and operation

Working in the field often means gloves and safety gear, and the Honeywell BW™ Solo takes this into consideration with easy one-button control, ideal for use with gloves. In addition, the Honeywell SafetySuite Device Configurator software can also be used to configure, adjust, and set parameters on the detector. It is also simple to access data on STEL (short-term exposure limits), TWA (time-weighted average), and peak gas readings over a rolling 24 hours.

Visible confirmation of detector compliance or noncompliance

The Honeywell BW™ Solo can be set up to show compliance or out of compliance status. Compliance status is indicated by green lights when the IntelliFlash™ is activated, which means it is operating correctly and has been bump tested.

The option to monitor for noncompliance is also done through the IntelliFlash™ feature. This is a flashing red light on the detector that indicates a gas event, the need for calibration, or the need for a new battery.

Variety of alarms to hear and see

When an alarm occurs, the Honeywell BW™ Solo illuminates with red LED lights around the screen. In addition, the detector vibrates while also emitting a loud alarm that is easy to hear and see in any environment.

Configure and use the detector with ease.

 

Track locations and workers

The detector can be assigned to locations or workers for rapid detection of alarms and gas events.

Rolling 24-hour peak readings

High gas readings under the level to trigger the alarm can be monitored with the rolling 24-hour peak reading record. This is essential to determine potential safety issues before they are serious concerns.

Display in major languages

The Honeywell BW™ Solo offers data on the screen in a range of different major languages for efficiency and safety.

Part Number: BWS1-A2-B

Making portable single-gas detection simple and efficient.

 

Sensor options, easy of use, and next-generation technology. Including all of the features of the ToxiPro® and the GasAlert Extreme detectors, the new Honeywell BW™ Solo will: Decrease the cost of owners with a long duty cycle Increase compliance with easy operation Make connected workers more efficient Provide greater safety

Compact and accurate

The Honeywell BW™ Solo is extremely user-friendly with a lightweight profile and compact design, coupled with reliability and accuracy.

Low-cost operation over a longer life cycle

Struggling to change out sensors or replace batteries? This is no longer a concern with the Honeywell BW™ Solo. Just pop off the compartment lid to change the sensor filter, with the battery and sensor also easy to replace.

Sensors for standard and exotic gas

Whether you need to test a single gas in a petrochemical plant or a steel manufacturing facility, the Honeywell BW™ Solo offers the right sensor for the job. In addition to oxygen, hydrogen, ammonia, and sulfur dioxide, the detector has sensors for:

• Hydrogen sulfide (H₂S)
• Carbon monoxide (CO)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ozone (O₃)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

 

A single-gas detector using the revolutionary 1-Series sensor for increased safety, accuracy and cost-savings.

Ideal for monitoring the most monitored gases, the next-generation 1-Series sensor is designed to continue to provide accuracy and reliability even in harsh and challenging environments.

Standard Gases – Fast Response

The 1-Series sensor offers a rapid diffusion square design and a height that is just a third of other sensors on the market. In a compact package, it is able to detect CO, H₂S, and O₂, with more gas types on the way.

Reduced cost of ownership with a 3-year warranty and 5-year sensor life.

With typical gas detection use, the 1-Series sensor performs for up to 5-years, eliminating the cost of replacement and downtime issues with other sensors. Coupled with a 3-year warranty, this provides confidence in investing in this technology.

Developed by Honeywell

As one of the Honeywell companies, City Technology developed the 1-Series sensor for quality and performance. City Technologies has 4 decades in the industry and produced the 40XXV and the 40xLL oxygen sensors that are used in the BW detectors by Honeywell.

Accuracy and reliability

Tired of nuisance alarms on detectors? In temperatures from -40°C to 60°C, the Honeywell BW™ Solo performs accurately, eliminating nuisance, even in extreme environments with transient pressure and high humidity.

Easy sensor replacement

Need to change out sensors in the field? With the 1-Series sensor, it is as simple as taking out the old and putting in the new, no breakdown or reassembly required.

Managing Data and Automating Fleet Management Made Easy

Combining the Honeywell BW™ Solo with the Honeywell SafetySuite Device Configurator software and the IntelliDox maximizes compliance, productivity, and safety.

Managing data, configurating and recordkeeping with IntelliDox

The IntelliDox docking station allows easy data transfer with automated actions to transfer test results, complete bump tests, set bump reminders, complete calibration, and modifying set points as well as managing firmware updates. The software also provides transfer of all data, including peak readings and alarms, using an Ethernet or USB connection.

Multiple detectors are no problem. The IntelliDox docks can be grouped in numbers up to five, each with its own LCD screen, pump, and keypad, while sharing power and calibration gas for increased efficiency.

Concise compliance monitoring with Device Configurator

Device Configurator is Windows-based software that allows you to configure alarms, view and transfer data, and to manage all firmware updates from your computer - leading to increased compliance across all sites.

Moving to the Cloud

Yet another option to consider is the use of the cloud-based subscription offered through the Honeywell SafetySuite Device Manager. This allows you to use the cloud to:

• Customize and use specific features to streamline compliance
• Create reports as needed
• Receive email or text messages of alarms in real-time
• Have the ability to see all detectors across multiple sites in a user-friendly dashboard, allowing for immediate response to potential or real concerns

 

Turn your smartphone into a detector manager. Thanks to apps offered by Honeywell's Connected Worker system and portfolio, your smartphone can be used to wireless increase safety, compliance, and productivity.

An app for detector setup, configuration and verification of test data.

Any smartphone can be linked to the Honeywell BW™ Solo, and with the use of the Device Configurator app, the Honeywell BW™ Solo can be configured, set points established, firmware updated and many more actions.

This is all done using Bluetooth Low Energy (BLE), which also provides the option to see bump data and calibration results, including who did the last calibration, when it was done, and what the readings were. This data can be entered into a certificate and sent to those requiring the data.

Decease equipment needs by skipping the docking station.

By choosing the wireless connection through the smartphone app, there is no need to have docking stations. The same BLE is used to transfer data from the detector to the desktop software, making it a practical solution for fleet management.

Make safety monitoring effective.

Using the Safety Communicator app allows the safety manager to track data from detectors without needed to be docked. Once paired with the smartphone, the app sends the required readings to a Honeywell monitoring software system, which is then accessed by internet-connected devices. This allows for complete tracking of worker location and safety issues.

Become compliance confident across the operation.

 

Easy to use detector

In any type of environment, the Honeywell BW™ Solo is designed for easy use. It can be controlled by a one-button system on the job or managed by the Honeywell SafetySuite Device Configurator software. In addition to configuring the detector, measurements on short-term exposure limits (STEL) and time-weighted average (TWA), along with peak gas detection readings, are all easy to access.

Visible compliance or out of compliance status

For easy visibility in any type of environment, the Honeywell BW™ Solo is equipped with the IntelliFlash™ system. This provides a blinking green light for compliance, meaning the detector is monitoring and has been bump tested.

Red flashing lights mean out of compliance. This may include a gas event, the requirement for calibration, or the need for a new battery. With both options available, you can choose the option best suited for the job.

Visual and Auditory Alarms

In addition to a loud, robust alarm, the detector also has LEDs around the detector that flash red during an alarm. The detector also vibrates, making it noticeable in any environment.

Practical Operation and Configuration

 

Keeping track made easy.

To quickly identify a worker or a location where a detector is used or in the event of an alarm, assign detectors throughout the workplace.

Rolling Peak Gas Readings

The Honeywell BW™ Solo is able to maintain a 24-hour rolling peak reading of the gas you want to detect. This allows control of sub-alarm levels that may be associated with problems.

Common Languages

The Honeywell BW™ Solo can be configured to display gas readings in major languages for use around the world.

Part Number: BWS1-HL-Y

BW Technologies Breathing Adaptor for GasAlert Extreme

Part Number: GABAK1

Simplicity in operation
Dependable and gives more protection
Made for confined spaces
Enhanced safety protection

Honeywell BW™ Ultra – Detects 5 Gases

 

Specially Made for Confined Area Gas Detection

Safety is the most important consideration for your workers, and at Honeywell, we take safety very seriously. When you purchase the Honeywell BW™ Ultra, you have some of the best equipment for monitoring worker safety. Your Honeywell BW™ Ultra can monitor gases and take samples in the tightest of spaces. You enjoy important features like innovative sensor design, better connectivity, more comfort, with an easy to read screen. Enhanced durability gives you a safer place to work.

Are you looking for a portable gas monitor for checking out confined space? If so, you should consider the pumped Honeywell BW™ Ultra for these reasons:

• Permits and regulations compliance
• You and your crew can safely enter confined areas with confidence.
• Protect everyone in your organization from dangerous gas levels.

 

Why the Honeywell BW™ Ultra?

• Enhanced reliability thanks to 1-Series sensor capability
• Monitor gases remotely
• Better performance with enhanced features.

 

Important Features of the Honeywell BW™ Ultra

• Remote monitoring advantage
• Enhanced awareness for all situations involving dangerous gases
• TouchConnect™ lets you easily manage all your instruments
• Bigger and better LCD screen for checking out gases
• Better reliability thanks to the 1-Series sensor feature.

 

The Honeywell BW™ Ultra has a pump which is always running. This feature lets you take in gases, read gas levels and sample gases quickly and easily. The simple operation makes it a breeze to use

Do you want the most effective gas detection with the easiest to read and understand features?

 

Get ready for a new experience

If you need to monitor gases for confined spaces, you have to be extremely vigilant and constantly keep track of the atmospheric gases. The Honeywell BW™ Ultra is an easy to use detector with an easy to read screen so you can check gas levels quickly.

Portable and Durable

Your Honeywell BW™ Ultra is extremely tough and durable and is made for extreme conditions. For example, its IP66/68 rating ensures your detector is completely resistant to dust. It can withstand water submersion to a depth of nearly four feet. Drop it, and it is still working. Take it into the dustiest areas, and you have no problems with your instrument. You can detect hazardous gases with a high degree of confidence.

The Importance of Ergonomics on the job

Today most companies are concerned about ergonomics. It is important for sitting at desks but just as important are the instruments you hold in your hand. Our handheld equipment is comfortable and easy to operate as you check out the atmosphere. The Honeywell BW™ Ultra is a perfect fit for your hand. It is slimmer than most detectors. This helps to eliminate fatigue and increase worker comfort.

Just One Button

Operation is fast and simple. You only need to use one button with the Honeywell BW™ Ultra. It is also possible to wear your gas detector as you check out confided area atmospheres. It goes where you go, and the internal pump design means no snagging.

5 Sensor Power for Detecting Hazardous Gases

Here are the most common gases your Honeywell BW™ Ultra can detect and monitor in tight spaces:

• (CO) carbon monoxide
• (O2) oxygen
• (H2S) hydrogen sulfide
• (LEL) lower explosive limit gases – percent volume or percent LEL

 

5th sensor – this lets you decide which fifth gas you want to add to your detector. For example, maybe you want to include chlorine or ammonia. You may need to keep track of VOCs. If you are in the pulp and paper, water treatment, or chemical industries, the option of adding gases is very important. This is especially important in the O&G industries too.

Honeywell BW™ Ultra lets you monitor unsafe situations so you can make the right decision quickly and without hesitation.

Are you looking for increased production and enhanced safety? The Honeywell BW™ Ultra can make this happen. Here is an example:

Suppose your crew is working in confined spaces and the possibility of O2 level increases means a higher chance of fire or explosion. Keep a crew member outside the area with his Honeywell BW™ Ultra monitor in hand. He can keep a close eye on conditions because the Honeywell BW™ Ultra is so easy to use and read.

This is a perfect example or being proactive on your personal safety issues.

With high-risk work you need more than simple gas monitoring

Don't be afraid to use your Honeywell BW™ Ultra wherever you need it. Yes, it is designed and manufactured for gas detection in confined areas. However, it performs just as well in day-to-day work situations, with the help of the mobile phone app – Honeywell Safety Communicator.

Do you need to monitor the air in high-risk areas?

The Honeywell BW™ Ultra with the Honeywell Safety Communicator is Bluetooth compatible. You can monitor gases remotely from a wide range of areas including control rooms and offices. This gives you more protection from emergency situations involving gas hazards in the air.

The Value of "Hole Watch" Mode

In some areas, you need constant air gases monitoring to keep your workers safe from harm. For example, how many parts per million (PPM) is safe? Here is the easiest way to solve this issue. Set your Honeywell BW™ Ultra to "Hole Watch".

What Does "Hole Watch" Do?

With Hole Watch you can keep a close eye on specific gases in the air. For instance, if chlorine levels are getting higher, you can take the necessary steps to correct the problem or evacuate your crew. You'll see each gas level in real-time, and you can check the levels as they rise and fall before your eyes.

Watch gas levels increase or decrease – only with Honeywell detectors

Your gas monitoring person is the most important crew member you have. When you give him the Honeywell BW™ Ultra, he has the best possible equipment for the job.

Enjoy the most dependable and well-made sensor technology

Your Honeywell BW™ Ultra comes with the 1-Series sensor, and this technology was the result of a mutual effort by Honeywell and City Technology (a well-known worldwide gas sensor maker for the past 40 years). The 1-Sensor is part of a line of some of the finest sensors in industry like the 40XV from our GasAlert models and the City 40xLL O2 sensor which you will find in the GasAlertMicroClip X3. With this kind of pedigree, you can trust our 1-Sensor.

Are you tired of alarms when you don’t really need them?

Some of the best things are small and compact, and this is true with the 1-Sensor. Even though it is not large, it delivers accurate measurements on a consistent basis. Do you work in very warm or cold conditions?  The 1-Sensor in our Honeywell BW™ Ultra has been tested in conditions as hot as 60C and cold as -40C. This includes high humidity levels, transient pressure, and other extreme conditions.

As Many as Five Years of Continuous Service

If you owned other detectors besides Honeywell models, you probably noticed they can go through sensors rather quickly. In fact, you may spend a lot of company time and resources on sensor changes. This does not happen with the Honeywell BW™ Ultra (1-Series sensor technology). It can last as long as 60 months (5 years), and you receive a 3-year warranty.

This gives you better performance at a lower cost.

Do you want to streamline your maintenance? The Honeywell BW™ Ultra is the equipment for you with low-cost downtime reduction.

No Hassle Calibrating and Bump Testing

How often do you need to calibrate or bump test? With most detectors, you have to take them to your docking station. Yet, if you use TouchConnect™ technology bump tests and calibration can be automatic – no docking station required.

Do you manage a fleet of gas detectors?

You may need to reset gas alarms for specific gases. Use your TouchConnect™, and this job is done for you with no problems and no hassles. This is the perfect solution to managing your time and detectors. You don't have to use special software programs or docking stations. For those with large fleets of instruments, this is a "no brainer". No manual updates thanks to Bluetooth.

Tight spaces – No problem for this 5-gas detector

How many gas hazards must you monitor at one time? Your Honeywell BW™ Ultra can handle most typical gases you face each day in the workplace. This includes carbon monoxide, oxygen, LEL, and hydrogen sulfide. Do you need a fifth gas detection property? The Honeywell BW™ Ultra can do this. For instance:

Hydrogen Sulfide

Gas and oil, paper and pulp industries

Chlorine

Swimming pool systems and wastewater treatment

Carbon Dioxide

Breweries and winemaking

Ammonia

Commercial and industrial refrigeration, chemical businesses, wastewater, agriculture

Hydrogen Cyanide

Food shipping (perishables)

VOCs

Companies using solvents and paints
Nitrogen Dioxide
Welding and construction

Inert Atmosphere Problems Solved

The Honeywell BW™ Ultra has a special Intelligent Inert function which lets the user check for low O2 levels in the air. It can adjust the alarm settings automatically no matter if you are in a normal or inert atmosphere. For example, an ascending alarm is needed for inert environments but not for standard environments.

More than Just a Confined Space Gas Monitor

Your Honeywell BW™ Ultra works perfectly in most confined areas. However, you have the same high-quality protection in all kinds of possible hazardous conditions.

For example, after using it for tight spaces, you can also use it for other areas, and it works just as well. Are some of your workers close to sources of deadly chlorine gas? Maybe some people must use solvents or paints during the day. Your Honeywell BW™ Ultra has a removable sampling hose. Just take it out, and you can wear it as a standard gas monitor. This helps to keep equipment costs down while maintaining safety.

The Honeywell BW™ Ultra – keeping your crew safe as well as your facility

When you need the best source for safety equipment and protection in hazardous conditions, Honeywell Industrial Safety is there for you. We help you protect the lives of your employees in a number of dangerous conditions. With Honeywell, your safety risks go down, and they even become an important advantage because you can lower safety equipment costs while increasing efficiency.

Honeywell is the leading producer of industrial safety products and technologies. Do you need head protection, protection from falls, or many other types of equipment? We offer both portable and fixed solutions to your needs. Check out the Honeywell BW™ Ultra today for the best in real-time hazardous gas technologies.

Part Number: HU-X1W1H1M1Q1-Y-N

Simple to operate and reliable tight area gas detection adds more protection with enhanced features

5 gas protection with the Honeywell BW™

 

Made for confined or tight areas

Are you concerned with worker safety? Honeywell joins you in this concern, and this is the reason we designed the Honeywell BW™ Ultra. It is one of the easiest and most effective ways to maintain worker safety on the job. The Honeywell BW™ Ultra monitors and checks gases in small and confined areas. Honeywell technology gives you advanced sensors, increased comfort, connectivity, and it's easy to read. It is one of the toughest and more durable monitors available.

Why Choose the Honeywell BW™ Ultra?

• You can monitor gases remotely
• LCD screen is simple to use and easy to read
• Manage your instruments with TouchConnect™ technology
• 1-Series sensors give you enhanced reliability
• Better awareness for monitoring environments

 

Do you need the best possible gas monitoring for confined or tight spaces? Consider the pump driven Honeywell BW™ Ultra and here is why:

• Protect your people from five kinds of problem gases
• Keep up with the latest regulations
• Confidently enter confined areas with possible gas issues

 

A better way to prevent on the job gas-related incidents – the Honeywell BW™ Ultra. Here are some of its benefits:

• Monitor from remote locations
• Better gas safety in a user-friendly package. Confined or tight spaces are its specialty.
• Enhanced hole watch options
• Bigger LCD screen for easier readings
• 1-Series sensor delivers enhanced safety and dependability
• TouchConnect™ gives you faster instrument reading and management.

 

Internal pump runs continuously. This simplifies the process of taking in gases and analyzing them. Your instrument is very easy to operate, and it offers valuable protection from hazardous environments.

An innovative way to monitor dangerous gases in confined space. Simple and easy to read gives you outstanding protection.

If you have people working in a potentially volatile atmosphere, you need to keep constant watch on the gases in the air. The Honeywell BW™ Ultra makes monitoring very easy with its high-resolution screen. You have no delays so you can take action immediately to protect your crew.

Gas Detection on the Go

Your Honeywell BW™ Ultra is one of the toughest and most durable gas monitors on the market. You have a great deal of protection from dust ingress and moisture penetration (even in high-pressure spraying and total water submersion at 3.9 feet). It has a rating of IP66/68. Even if you accidentally abuse this unit, it can take a beating and keep on working. Works well in the dustiest and wettest of environments.

Ergonomic design is easy to use

You do not have to wear the Honeywell BW™ Ultra.

It is made for handheld operation as you check the safety of the atmosphere. This unit is one of the most comfortable detectors you can buy because it perfectly fits into the hand. The profile is nice and slim, and it does not weigh a lot. This is a good way to lessen the fatigue factor while increasing productivity.

It operates by just using a single button. This is the kind of experience Honeywell is famous for. Wearing your Honeywell BW™ Ultra is easy and perfect for working in confined areas. Because the pump is inside, your instrument stays in one position and moves when you move. No snagging or getting in the way.

5 Sensors are Better Than 4

Do you have more than one gas to monitor in an environment? Your Honeywell BW™ Ultra can sense these gases:

Oxygen
Hydrogen sulfide
Carbon monoxide
LEL – lower explosive limit levels

Maybe chlorine is a hazard where you work. Perhaps you have to watch conditions for sulfur dioxide levels. Are some of your workers around VOCs (volatile organic compounds)? You can choose a fifth selection for gas monitoring.

The Honeywell BW™ Ultra is a good choice for people working in water treatment facilities and chemical plants. Those in the marine and paper industries can also benefit because you have so many choices for gas monitoring.

Monitor possible dangerous situations in real-time for faster action when needed

Industrial businesses pay out a lot of money every year on safety issues like dangerous gases in the air. Often times, they spend more than they need to because they are not proactive with safety management.

With the help of equipment like the Honeywell BW™ Ultra, many volatile gas incidents can be avoided. It's user-friendly and simple to operate design makes it a breeze to use. In fact, you can keep someone just outside a dangerous area to monitor gases. This lets you take care of most issues before they become problems. It lowers work stress levels because your people know someone has their backs and they are safer and more productive.

Real-time remote monitoring for high risk workers

Just because the Honeywell BW™ Ultra is made for confined spaces doesn't mean you cannot use it anywhere. You only need the Honeywell Safety Communicator app to start taking important gas readings where needed, and this can be done remotely.

Do you need to monitor a high-risk area in a tight or small space? You can send vital readings via Bluetooth to your gas monitoring software from Honeywell. This info is easily accessed from control rooms or any remote location. This gives you an extra monitoring function in case of trouble or emergency issues.

Simple Design and Operation Simplifies Hole Watch

When you monitor vital gas readings where people are working you have their lives in your hands. There is no room for guesswork or using equipment which doesn't measure up to the task. Thanks to the Hole Watch function, your Honeywell BW™ Ultra can give you accurate and constant gas readings of a designated area. With Hole Watch you see all gas readings in real-time. For example, you also have a graph next to each gas so you can see immediate changes in concentrations. As soon as a hazardous gas gets close to dangerous levels, you can take the needed action to keep everyone safe from harm.

Only Honeywell lets You check gas levels as they happen

You can have the best people with the right kind of training, but if they have poorly designed gas monitoring equipment, they cannot do their jobs. They need the Honeywell BW™ Ultra.

Honeywell – setting the standard for sensor reliability

The 1-Series sensor was a product of a combined effort between Honeywell and City Technology, a worldwide producer of gas sensors for over four decades. This sensor came from the same technology that brought you the GasAlert detector with its 40XV oxygen sensor and the GasAlertMicroClip X3 with its 40xLL high quality sensor you can depend on this technology to give you the most accurate and dependable service.

Great Performance and no false alarms to worry about – even in high risk areas.

Our 1-Sensor is not large, but it is powerful.
This compact sensor delivers some of the most precise and accurate readings no matter what the ambient temperature is. For example, it performs just as well in extreme cold (-40C) as it does in very warm temperatures (60C). You get the same reliability even in the most extreme conditions.

Extended Sensor Life

Not all gas detectors can give you long service without interruption. In fact, some gas sensors wear out fast, and you have to replace them at the most inconvenient times. This costs money and valuable time on the job. When you buy the Honeywell BW™ Ultra, you can receive as much as 5 years (60 months) of service, and it comes with a full 3-year guarantee. This is the best way to maintain a lean and efficient operation without sacrificing quality.

Honeywell Technology – giving you The Honeywell BW™ Ultra for more uptime and lower costs: Bump Tests Made Simple

How often do you bump test your gas detectors? Do you need a docking station for the task? Many people do. However, with TouchConnect™ you do not need docking stations. It finds all your units in range and takes care of matters.

Do you have an entire fleet of Detectors to look after?

TouchConnect™ can do more than just Bump tests. Suppose you want to update your set points for dangerous gas level alarms. This is done automatically when you use the TouchConnect™ device.

How many detectors are in your fleet? The larger the fleet, the easier it is when you have TouchConnect™.
No docking station needed. Just send TouchConnect™ where you need it, and it handles the updating task thanks to its Bluetooth capabilities.

Are you monitoring many gases at once?

Some confined spaces have multiple risks due to a combination of dangerous gases. This is where the Honeywell BW™ Ultra is very handy. You can set it up to handle a wide range of gases like LEL, CO, H2S, and O2. But this is not all. You have the option of monitoring a fifth dangerous gas. For instance:

SO2 (Sulfur Dioxide)

Pulp paper gas and oil industries

NH3 (Ammonia)

Industrial refrigeration systems, agriculture, chemical companies, paper mills, water treatment

CL2 (Chlorine)

Swimming pools, wastewater systems, paper, and pulp companies

VOCs (Volatile Organic Compounds)

Any company using a lot of solvents or paints for finishing, cleaning, and other uses.

CO2 (Carbon Dioxide)

Beer and wine industries

NO2 (Nitrogen Dioxide)

Shielding gas for welding applications

HCN (Hydrogen Cyanide)

Shipping perishables and food

Inert Atmospheres Solutions

What is Intelligent Inert Mode from the Honeywell BW™ Ultra? Suppose you need to check for low levels of oxygen in the air. This is a dangerous condition and must be constantly monitored. The Honeywell BW™ Ultra can automatically adjust alarms for inert environments and for normal environments.

The Value of Versatility More than just confined areas

Use your Honeywell BW™ Ultra for dependable gas monitoring in the most confined areas you have. Yet, it also works well as an everyday gas detector.

Do you have people working around ammonia refrigeration systems or chlorine gas? Maybe someone uses solvents for cleaning and the danger of VOCs exists. You only need to remove the Honeywell BW™ Ultra's sampling hose, and it becomes a valuable piece of protection gear. This cuts your equipment costs.

The Honeywell BW™ Ultra protects your business and crew with its innovative technology

Do you need to protect your workers from dangerous gases? You can turn to Honeywell Industrial Safety for help. We are the leading source for industrial safety gear and equipment. You can depend on Honeywell for the latest in cost effective and high-quality personal protection gear for all kinds of uses.

We help you lower your safety gear costs, risk factors, and you can enjoy fewer downtime issues and a more productive workforce. We also offer safety administration and analytics in addition to our other safety and safety monitoring equipment.

Part Number: HU-X1W1H1M1Q1-B-N

Easy to use and dependable
Detects gas in tight spaces
Added detection
Enhanced protection

Honeywell BW™ Ultra detects 5 gases Portability for confined space use

Safety is our prime concern at Honeywell, and the Honeywell BW™ Ultra (5 gas detector) lets you put your workers' safety first. It's specifically made for taking samples and gas monitoring in tight areas. Honeywell BW™ Ultra delivers advanced sensor technology, connectivity, comfort, and easy to see readings. This provides enhanced reliability and lets you anticipate and prevent gas related incidents in the workplace.

If you need portable gas monitoring and sampling in confined areas, the Honeywell BW™ Ultra pumped dangerous gas detector can help you:

• Comply with permit regulations and rules for confined space gas sampling.
• Protect workers and your entire operation from gas incidents.
• Make it possible to enter and work in confined spaces safely, while everyone is inside.

 

Benefits of Using the Honeywell BW™ Ultra:

• User-friendly and dependable method for enhanced gas safety in tight areas
• 1-Series sensor technology provides better reliability on the job
• Enhanced protection with remote monitoring capabilities
• Better situational awareness during your entire work shift
• Manage instruments quickly and easily thanks to our TouchConnect™ Technology
• New LCD screen makes it easy to check gas levels and monitor areas

 

The pump is internal and never stops running, so the Honeywell BW™ Ultra easily takes in air through its sampling hoses and checks it for hazardous gases. This gives you a simple and easy to use safety tool.

Monitoring the air for dangerous gases is simple and uncomplicated. Sophisticated gas detecting in small spaces and confined areas.

Gas Readings offer enhanced visibility

When you are in an area with volatile, dangerous, or explosive gases, you must constantly monitor the atmosphere. The best way to do this is with the Honeywell BW™ Ultra because the readings are clear and easy to see. High-resolution screen makes it possible to check 5 gas levels quickly and accurately.

Take it Wherever You Go

Made for enhanced durability, your Honeywell BW™ Ultra can stand some of the harshest environments. In fact, the Honeywell BW™ Ultra is rated high for moisture and dust resistance. An IP66/68 rating can withstand submersion in water as deep as 3.9 feet (1.2 meters). Your Honeywell BW™ Ultra can be dropped on the ground, into a vat of liquid, or taken into an extremely dusty area and still give you the reliable, enhanced gas protection you need for the job.

Ergonomic Design Fits Your Hand

Holding or wearing some gas detectors is awkward and uncomfortable. This is why we made the Honeywell BW™ Ultra specifically for holding comfort. It fits the hand perfectly while you take your gas readings. It is not heavy, and its slim design is easy to hold onto. This helps to prevent hand fatigue and give you better efficiency.

Works well with gloves or with bare hands

Simple 1 button operation design is so easy to use and makes gas sampling and monitoring a breeze. This is the kind of equipment you can expect from Honeywell. It is easy to wear as you go about your business. The smooth design does not snag, and internal pump runs all the time. In tight spaces, it can be your best friend.

5 Gas Sensing Capacity for Staying Safe on the Job

With your Honeywell BW™ Ultra you enjoy detection of these gases:

H2S – hydrogen sulfide
O2 – oxygen
Lower explosive limit combustible gases
CO – carbon monoxide (choose% vol, LEL or LEL%)

You can also choose a fifth gas you want to monitor or check. Do you have sulfur dioxide issues? Maybe you need to make sure deadly chlorine gas is not in the air. You can also check for volatile organic compounds, and this is important for those in the oil and gas industries, chemical and paper plants, water treatment facilities, pulp, and other industries.

Situational awareness in real-time – making monitoring gases in tight space fast and easy – helps you make quick decisions on worker safety

Safe air to breathe in confined areas is a major safety concern with many industries today. However, many problems still exist because some companies are reactive as opposed to proactive when it comes to monitoring threats.

With the Honeywell BW™ Ultra, you can prevent many accidents involving dangerous gases. While your people are inside a confined area, you can have someone just outside constantly monitoring the air for hazards. The Honeywell BW™ Ultra makes the entire process of checking for dangerous gases like H2S or CO simple and fast. This lets you correct small problems before they become major issues, giving you enhanced safety and efficiency.

Remote Monitoring (real-time) is Perfect for High-Risk Applications

The Honeywell Safety Communicator App is made to work with the Honeywell BW™ Ultra. It lets you use your gas monitoring tools in places you may not have thought possible, and more people have access too.

Bluetooth Technology gives you more options than ever. Just set up your real-time monitoring with Bluetooth, and you can monitor for possible dangerous conditions from remote locations like your control room. This provides an added layer of protection for your workers.

Hole Watch made easy thanks to Honeywell easy to understand technology

When you have people working in a confined area, your Honeywell BW™ Ultra is there to check for gas concentration changes. Just switch the Honeywell BW™ Ultra to “Hole Watch” This gives you the gas concentrations in real-time to help you maintain maximum safety, hole watch mode gives you a graph reading (ppm) of gas concentrates to help you know when any of them are close to a critical state.

Available only with Honeywell equipment, Hole Watch mode lets you check gases as they rise and fall. This gives you the chance to get all your workers to safety when needed, avoiding accidents, injuries, and downtime.

Honeywell gives you real-time gas change monitoring.

Are you sure your gas detector can do the job? Unless your detector is specifically designed for confined spaces, like the Honeywell BW™ Ultra, you may be taking some unnecessary chances with your workers’ safety.

The Finest sensor reliability and quality in the industry

Working with City Technology, we designed the 1-Series sensor. City Technology has been a worldwide producer or fine gas sensors for over forty years. The 1-Series is an upgrade from the very successful 40 XV O2 sensor in the GasAlert detector and the long-life O2 sensor, 40xLL specially made for our GasAlertMicroClip X3. You can depend on the 1-Series because our sensors have a rich history of gas detection dependability.

Do you need dependability with no nuisance trippig – in the harshest of environments?

Do not let its size fool you. The 1-Series sensor gives you some of the most accurate gas readings even in temperatures as cold as -40 F and as warm as 140 F. Now add other factors like pressure humidity, wind, and precipitation.It does not matter how extreme the conditions, your Honeywell BW™ Ultra is up to the task for dangerous gas detection.

No senor changes for five years

If you invest in some gas detecting equipment you may need to change sensors often. In fact, some may not last you a year and you end up spending a lot of money.

Plus you have to take the units out of service to replace sensors. The Honeywell BW™ Ultra can give you 60 months of continuous sensor service (depending on usage)

In addition, we provide a 36 month warranty on our Honeywell BW™ Ultra models for cost-effective gas detection with few maintenance issues.

Would you like to increase your operating efficiency while reducing your downtime and equipment costs? Consider the Honeywell BW™ Ultra.

Do you spend too much time with bump tests? Our Honeywell BW™ Ultra is designed to facilitate this task.

Bumping is easy, and you do not even need docking stations.

Your TouchConnect™ device can locate your detectors for you and put them into bump mode.

Simple configuration for one unit or an entire fleet

Setting gas concentration alarms is sometimes time-consuming but when you have the Honeywell BW™ Ultra and TouchConnect™ Technology, alarm setting is simplified.

You only need to turn to your TouchConnect™ device to automatically setup your configuration settings.

This is very convenient for companies with many gas detectors (in branches all over the planet) to track and maintain) and you don’t need docking stations or special software programs.

Just contact each branch with your TouchConnect™. Your Bluetooth feature does the work for you.

Detecting Five Hazardous Gases

Do you face multiple gas hazards in your line of work? The Honeywell BW™ Ultra can detect more than just CO and O2. It can also tell if there are unsafe levels of LEL and H2S. In addition, you can also select a fifth setting for your specific applications. Here are some examples:

• SO2 – for those in the oil, gas, paper and pulp industries
• CL2 – wastewater treatment, water treatment, pools, and paper industries
• NH3 – pool systems, chemical, agricultural, refrigeration, and paper industries.
• CO2 – beer and wine industries
• HCN – food and perishables
• NO2 – construction
• VOCs – companies using paints or solvents

 

Solving Inert Environment Problems

When you use your inert mode on the Honeywell BW™ Ultra, you can check your environment for low O2 levels. Your gas detector automatically adjusts the settings for O2 level alarms, and it can adjust for normal atmospheres or inert atmospheres.

Do you need more than just gas detection for confined spaces?

Your Honeywell BW™ Ultra is specifically made to perform well in the most tightest and confined spaces. However, you can also use it for monitoring and sampling other parts of your work area. For example, are there possible chlorine hazards or do some of your workers have to be around volatile organic compounds for cleanup tasks? You can use your Honeywell BW™ Ultra for these jobs. Simply take out the sample hose, and you have a full-time gas monitor, saving you a lot on operating expenses.

Your Honeywell BW™ Ultra protects you, your crew, and your entire operation

Do you need help with protecting your workers from hazardous or dangerous environments? Honeywell Industrial Safety does much more than just make gas detectors. Our equipment maintains safety, reduces unnecessary downtime issues, and lowers costs, giving you greater efficiency and productivity.

Honeywell is the leading industrial safety equipment suppliers in the world. Our protective gear is all-encompassing, and we offer a complete portfolio for protecting every part of the body. In addition to personal gas detectors, we also provide real-time monitoring, safety administrating, and analytics.

Part Number: HU-X1W1H1M1S1-Y-N