Lead

10160045 Altair 2XT Two-Tox Gas Detector, CO/NO2, GLow, Sleep by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

MCXL-XWHM-Y-NA GasAlertMicroClip XL Detector Combustible (%LEL), Oxygen (O2), Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Yellow Housing by BW Technologies

Do you require a portable and simple to operate gas monitor that can detect and measure (O2) oxygen, (CO) carbon monoxide, and (H2S) hydrogen sulfide? Maybe you need to be sure that lower explosive limits (LEL) levels are monitored constantly for safety. The 4 gas GasAlertMicroClip XL may be the perfect monitor for your needs. Unlike the XT, which has battery power for as much as 10 hours per charge, the XL has enhanced battery life which will last for 18 hours on a charge. This is an excellent feature for workers that have to put in long hours.

Thanks to IntelliFlash™ technology, it is very easy to check for compliance. And the XL will perform well in the coldest of environments and the hottest temperatures. Training your workers is a breeze as they only need to learn how to use one button. Simple operation keeps workers from being distracted on the job and this leads to greater efficiency and fewer accidents. You can use the XL with the latest Fleet Manager II programs and MicroDock II calibration and auto test systems.

• Lightweight weighs in at 190 grams (6.7 ounces)
• Inexpensive can save on equipment costs
• Very little training time required
• Easy compliance verification with IntelliFlash™
• Comfortable enough to wear all day long
• Automatic calibration
• Continuous gas readings
• When you start up the XL, it tests its sensor, battery situation, and the alarms.
• Built-in impact resistant cover
• Supports English, Spanish, French, Portuguese, and German
• IP 66 and EMC Directive 2004/108/EC compliant
• 2 year warranty

Testing Capabilities

1. Moderate danger low level alarm sounds

2. Danger is significant high level alarm

3. Short term exposure limit has been reached (STEL) maximum short period exposure

4. Time weighted average limit maximum amount of exposure for an eight hour day (TWA)

The XL Comes with:

• Clip
• Battery
• AC charger
• Test hose and cap for calibration
• CD and manual

Part Number: MCXLXWHMYNA

10160021 Altair 2XT Two-Tox Gas Detector, CO/NO2, Gray, Sleep by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

TOC-903-X5 Dual Gas Detector Transmitter by IGD

This is the TOC-903-X5 – a detector transmitter approved for ATEX Zone 1 and 2 flammable environments and Zone 21 and 22 dust environments, that can be easily integrated into our 2-Wire Addressable system, or used as a standalone 4-20mA transmitter.

The TOC-903-X5 brings a variety of new tools to the table featuring non-intrusive one-person calibration, and accommodating up to 2 independent sensors, 2 analogue outputs, relays and 2-Wire digital communication. Its ability to monitor for over 400 flammable, toxic or asphyxiant gases ensures suitability for a huge variety of applications cementing the TOC-903-X5 as the most versatile detector on the market. Simple to install, easy to use, and backed by more than a century of innovation.

Unparalleled Versatility

• 2 Independent 4-20mA outputs.
• 2-Wire Sentinel+TM digital communication.
• 1 Fault and 2 alarm relays.

Fully Certified

• UKCA, ATEX and IECEX certified.
• Built to withstand Zone 1 and 2 hazardous areas.

Easy to Use

• Intuitive digital display, concentration, alarms and fault status
• Plug-and-Play sensors.

Peace of Mind

• Designed and manufactured in the UK.
• Backed up by more than a century of expertise and our 10-year guarantee.
• All compliance is supported by 3rd party certification.

Features

• Magnetic Wand: Our Magnetic Wand operates as a stylus allowing you to access the controls without removing the ATEX housing. With the Magnetic Wand, personnel can perform a one-person calibration in ATEXzoned areas without a hot works permits.
• At-a-Glance Status Checks: Our At-a-Glance LED status indicator is bright enough to be visible even in dim and dusty conditions and offers an immediate indication of the status of the environment. A green smile means all is well, a red frown indicates a hazard, and an orange frown indicates a fault.
• ATEX Stopping Plug: For unused ports on the X5 to keep ATEX rating. For example, if the sensor isn't installed in the port.
• Plug-and-Play Sensors: The TOC-903-X5 automatically updates itself when one of our plug-and-play sensors is fitted. Our industry-leading long-life sensors do the work for you, removing the need for setup. With sensors for over 400 flammable gases, the TOC-903-X5 maximises safety and minimises ongoing costs.

Easy to use and dependable
Detects gas in tight spaces
Added detection
Enhanced protection

Honeywell BW™ Ultra detects 5 gases Portability for confined space use

Safety is our prime concern at Honeywell, and the Honeywell BW™ Ultra (5 gas detector) lets you put your workers' safety first. It's specifically made for taking samples and gas monitoring in tight areas. Honeywell BW™ Ultra delivers advanced sensor technology, connectivity, comfort, and easy to see readings. This provides enhanced reliability and lets you anticipate and prevent gas related incidents in the workplace.

If you need portable gas monitoring and sampling in confined areas, the Honeywell BW™ Ultra pumped dangerous gas detector can help you:

• Comply with permit regulations and rules for confined space gas sampling.
• Protect workers and your entire operation from gas incidents.
• Make it possible to enter and work in confined spaces safely, while everyone is inside.

Benefits of Using the Honeywell BW™ Ultra:

• User-friendly and dependable method for enhanced gas safety in tight areas
• 1-Series sensor technology provides better reliability on the job
• Enhanced protection with remote monitoring capabilities
• Better situational awareness during your entire work shift
• Manage instruments quickly and easily thanks to our TouchConnect™ Technology
• New LCD screen makes it easy to check gas levels and monitor areas

The pump is internal and never stops running, so the Honeywell BW™ Ultra easily takes in air through its sampling hoses and checks it for hazardous gases. This gives you a simple and easy to use safety tool.

Monitoring the air for dangerous gases is simple and uncomplicated. Sophisticated gas detecting in small spaces and confined areas.

Gas Readings offer enhanced visibility

When you are in an area with volatile, dangerous, or explosive gases, you must constantly monitor the atmosphere. The best way to do this is with the Honeywell BW™ Ultra because the readings are clear and easy to see. High-resolution screen makes it possible to check 5 gas levels quickly and accurately.

Take it Wherever You Go

Made for enhanced durability, your Honeywell BW™ Ultra can stand some of the harshest environments. In fact, the Honeywell BW™ Ultra is rated high for moisture and dust resistance. An IP66/68 rating can withstand submersion in water as deep as 3.9 feet (1.2 meters). Your Honeywell BW™ Ultra can be dropped on the ground, into a vat of liquid, or taken into an extremely dusty area and still give you the reliable, enhanced gas protection you need for the job.

Ergonomic Design Fits Your Hand

Holding or wearing some gas detectors is awkward and uncomfortable. This is why we made the Honeywell BW™ Ultra specifically for holding comfort. It fits the hand perfectly while you take your gas readings. It is not heavy, and its slim design is easy to hold onto. This helps to prevent hand fatigue and give you better efficiency.

Works well with gloves or with bare hands

Simple 1 button operation design is so easy to use and makes gas sampling and monitoring a breeze. This is the kind of equipment you can expect from Honeywell. It is easy to wear as you go about your business. The smooth design does not snag, and internal pump runs all the time. In tight spaces, it can be your best friend.

5 Gas Sensing Capacity for Staying Safe on the Job

With your Honeywell BW™ Ultra you enjoy detection of these gases:

H2S – hydrogen sulfide
O2 – oxygen
Lower explosive limit combustible gases
CO – carbon monoxide (choose% vol, LEL or LEL%)

You can also choose a fifth gas you want to monitor or check. Do you have sulfur dioxide issues? Maybe you need to make sure deadly chlorine gas is not in the air. You can also check for volatile organic compounds, and this is important for those in the oil and gas industries, chemical and paper plants, water treatment facilities, pulp, and other industries.

Situational awareness in real-time – making monitoring gases in tight space fast and easy – helps you make quick decisions on worker safety

Safe air to breathe in confined areas is a major safety concern with many industries today. However, many problems still exist because some companies are reactive as opposed to proactive when it comes to monitoring threats.

With the Honeywell BW™ Ultra, you can prevent many accidents involving dangerous gases. While your people are inside a confined area, you can have someone just outside constantly monitoring the air for hazards. The Honeywell BW™ Ultra makes the entire process of checking for dangerous gases like H2S or CO simple and fast. This lets you correct small problems before they become major issues, giving you enhanced safety and efficiency.

Remote Monitoring (real-time) is Perfect for High-Risk Applications

The Honeywell Safety Communicator App is made to work with the Honeywell BW™ Ultra. It lets you use your gas monitoring tools in places you may not have thought possible, and more people have access too.

Bluetooth Technology gives you more options than ever. Just set up your real-time monitoring with Bluetooth, and you can monitor for possible dangerous conditions from remote locations like your control room. This provides an added layer of protection for your workers.

Hole Watch made easy thanks to Honeywell easy to understand technology

When you have people working in a confined area, your Honeywell BW™ Ultra is there to check for gas concentration changes. Just switch the Honeywell BW™ Ultra to “Hole Watch” This gives you the gas concentrations in real-time to help you maintain maximum safety, hole watch mode gives you a graph reading (ppm) of gas concentrates to help you know when any of them are close to a critical state.

Available only with Honeywell equipment, Hole Watch mode lets you check gases as they rise and fall. This gives you the chance to get all your workers to safety when needed, avoiding accidents, injuries, and downtime.

Honeywell gives you real-time gas change monitoring.

Are you sure your gas detector can do the job? Unless your detector is specifically designed for confined spaces, like the Honeywell BW™ Ultra, you may be taking some unnecessary chances with your workers’ safety.

The Finest sensor reliability and quality in the industry

Working with City Technology, we designed the 1-Series sensor. City Technology has been a worldwide producer or fine gas sensors for over forty years. The 1-Series is an upgrade from the very successful 40 XV O2 sensor in the GasAlert detector and the long-life O2 sensor, 40xLL specially made for our GasAlertMicroClip X3. You can depend on the 1-Series because our sensors have a rich history of gas detection dependability.

Do you need dependability with no nuisance trippig – in the harshest of environments?

Do not let its size fool you. The 1-Series sensor gives you some of the most accurate gas readings even in temperatures as cold as -40 F and as warm as 140 F. Now add other factors like pressure humidity, wind, and precipitation.It does not matter how extreme the conditions, your Honeywell BW™ Ultra is up to the task for dangerous gas detection.

No senor changes for five years

If you invest in some gas detecting equipment you may need to change sensors often. In fact, some may not last you a year and you end up spending a lot of money.

Plus you have to take the units out of service to replace sensors. The Honeywell BW™ Ultra can give you 60 months of continuous sensor service (depending on usage)

In addition, we provide a 36 month warranty on our Honeywell BW™ Ultra models for cost-effective gas detection with few maintenance issues.

Would you like to increase your operating efficiency while reducing your downtime and equipment costs? Consider the Honeywell BW™ Ultra.

Do you spend too much time with bump tests? Our Honeywell BW™ Ultra is designed to facilitate this task.

Bumping is easy, and you do not even need docking stations.

Your TouchConnect™ device can locate your detectors for you and put them into bump mode.

Simple configuration for one unit or an entire fleet

Setting gas concentration alarms is sometimes time-consuming but when you have the Honeywell BW™ Ultra and TouchConnect™ Technology, alarm setting is simplified.

You only need to turn to your TouchConnect™ device to automatically setup your configuration settings.

This is very convenient for companies with many gas detectors (in branches all over the planet) to track and maintain) and you don’t need docking stations or special software programs.

Just contact each branch with your TouchConnect™. Your Bluetooth feature does the work for you.

Detecting Five Hazardous Gases

Do you face multiple gas hazards in your line of work? The Honeywell BW™ Ultra can detect more than just CO and O2. It can also tell if there are unsafe levels of LEL and H2S. In addition, you can also select a fifth setting for your specific applications. Here are some examples:

• SO2 – for those in the oil, gas, paper and pulp industries
• CL2 – wastewater treatment, water treatment, pools, and paper industries
• NH3 – pool systems, chemical, agricultural, refrigeration, and paper industries.
• CO2 – beer and wine industries
• HCN – food and perishables
• NO2 – construction
• VOCs – companies using paints or solvents

Solving Inert Environment Problems

When you use your inert mode on the Honeywell BW™ Ultra, you can check your environment for low O2 levels. Your gas detector automatically adjusts the settings for O2 level alarms, and it can adjust for normal atmospheres or inert atmospheres.

Do you need more than just gas detection for confined spaces?

Your Honeywell BW™ Ultra is specifically made to perform well in the most tightest and confined spaces. However, you can also use it for monitoring and sampling other parts of your work area. For example, are there possible chlorine hazards or do some of your workers have to be around volatile organic compounds for cleanup tasks? You can use your Honeywell BW™ Ultra for these jobs. Simply take out the sample hose, and you have a full-time gas monitor, saving you a lot on operating expenses.

Your Honeywell BW™ Ultra protects you, your crew, and your entire operation

Do you need help with protecting your workers from hazardous or dangerous environments? Honeywell Industrial Safety does much more than just make gas detectors. Our equipment maintains safety, reduces unnecessary downtime issues, and lowers costs, giving you greater efficiency and productivity.

Honeywell is the leading industrial safety equipment suppliers in the world. Our protective gear is all-encompassing, and we offer a complete portfolio for protecting every part of the body. In addition to personal gas detectors, we also provide real-time monitoring, safety administrating, and analytics.

Part Number: HU-X1W1H1M1S1-Y-N

10154078 Altair 2X Single Gas Detector, NO2 (2.5, 5), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

10154079 Altair 2X Single Gas Detector, NH3 (25, 50), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

10154071 Altair 2XT Two-Tox Gas Detector, CO-H2/H2S (CO: 25, 100; H2S: 10, 15), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

10154077 Altair 2X Single Gas Detector, SO2 (2, 5), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

Simple to operate and reliable tight area gas detection adds more protection with enhanced features

5 gas protection with the Honeywell BW™

Made for confined or tight areas

Are you concerned with worker safety? Honeywell joins you in this concern, and this is the reason we designed the Honeywell BW™ Ultra. It is one of the easiest and most effective ways to maintain worker safety on the job. The Honeywell BW™ Ultra monitors and checks gases in small and confined areas. Honeywell technology gives you advanced sensors, increased comfort, connectivity, and it's easy to read. It is one of the toughest and more durable monitors available.

Why Choose the Honeywell BW™ Ultra?

• You can monitor gases remotely
• LCD screen is simple to use and easy to read
• Manage your instruments with TouchConnect™ technology
• 1-Series sensors give you enhanced reliability
• Better awareness for monitoring environments

Do you need the best possible gas monitoring for confined or tight spaces? Consider the pump driven Honeywell BW™ Ultra and here is why:

• Protect your people from five kinds of problem gases
• Keep up with the latest regulations
• Confidently enter confined areas with possible gas issues

A better way to prevent on the job gas-related incidents – the Honeywell BW™ Ultra. Here are some of its benefits:

• Monitor from remote locations
• Better gas safety in a user-friendly package. Confined or tight spaces are its specialty.
• Enhanced hole watch options
• Bigger LCD screen for easier readings
• 1-Series sensor delivers enhanced safety and dependability
• TouchConnect™ gives you faster instrument reading and management.

Internal pump runs continuously. This simplifies the process of taking in gases and analyzing them. Your instrument is very easy to operate, and it offers valuable protection from hazardous environments.

An innovative way to monitor dangerous gases in confined space. Simple and easy to read gives you outstanding protection.

If you have people working in a potentially volatile atmosphere, you need to keep constant watch on the gases in the air. The Honeywell BW™ Ultra makes monitoring very easy with its high-resolution screen. You have no delays so you can take action immediately to protect your crew.

Gas Detection on the Go

Your Honeywell BW™ Ultra is one of the toughest and most durable gas monitors on the market. You have a great deal of protection from dust ingress and moisture penetration (even in high-pressure spraying and total water submersion at 3.9 feet). It has a rating of IP66/68. Even if you accidentally abuse this unit, it can take a beating and keep on working. Works well in the dustiest and wettest of environments.

Ergonomic design is easy to use

You do not have to wear the Honeywell BW™ Ultra.

It is made for handheld operation as you check the safety of the atmosphere. This unit is one of the most comfortable detectors you can buy because it perfectly fits into the hand. The profile is nice and slim, and it does not weigh a lot. This is a good way to lessen the fatigue factor while increasing productivity.

It operates by just using a single button. This is the kind of experience Honeywell is famous for. Wearing your Honeywell BW™ Ultra is easy and perfect for working in confined areas. Because the pump is inside, your instrument stays in one position and moves when you move. No snagging or getting in the way.

5 Sensors are Better Than 4

Do you have more than one gas to monitor in an environment? Your Honeywell BW™ Ultra can sense these gases:

Oxygen
Hydrogen sulfide
Carbon monoxide
LEL – lower explosive limit levels

Maybe chlorine is a hazard where you work. Perhaps you have to watch conditions for sulfur dioxide levels. Are some of your workers around VOCs (volatile organic compounds)? You can choose a fifth selection for gas monitoring.

The Honeywell BW™ Ultra is a good choice for people working in water treatment facilities and chemical plants. Those in the marine and paper industries can also benefit because you have so many choices for gas monitoring.

Monitor possible dangerous situations in real-time for faster action when needed

Industrial businesses pay out a lot of money every year on safety issues like dangerous gases in the air. Often times, they spend more than they need to because they are not proactive with safety management.

With the help of equipment like the Honeywell BW™ Ultra, many volatile gas incidents can be avoided. It's user-friendly and simple to operate design makes it a breeze to use. In fact, you can keep someone just outside a dangerous area to monitor gases. This lets you take care of most issues before they become problems. It lowers work stress levels because your people know someone has their backs and they are safer and more productive.

Real-time remote monitoring for high risk workers

Just because the Honeywell BW™ Ultra is made for confined spaces doesn't mean you cannot use it anywhere. You only need the Honeywell Safety Communicator app to start taking important gas readings where needed, and this can be done remotely.

Do you need to monitor a high-risk area in a tight or small space? You can send vital readings via Bluetooth to your gas monitoring software from Honeywell. This info is easily accessed from control rooms or any remote location. This gives you an extra monitoring function in case of trouble or emergency issues.

Simple Design and Operation Simplifies Hole Watch

When you monitor vital gas readings where people are working you have their lives in your hands. There is no room for guesswork or using equipment which doesn't measure up to the task. Thanks to the Hole Watch function, your Honeywell BW™ Ultra can give you accurate and constant gas readings of a designated area. With Hole Watch you see all gas readings in real-time. For example, you also have a graph next to each gas so you can see immediate changes in concentrations. As soon as a hazardous gas gets close to dangerous levels, you can take the needed action to keep everyone safe from harm.

Only Honeywell lets You check gas levels as they happen

You can have the best people with the right kind of training, but if they have poorly designed gas monitoring equipment, they cannot do their jobs. They need the Honeywell BW™ Ultra.

Honeywell – setting the standard for sensor reliability

The 1-Series sensor was a product of a combined effort between Honeywell and City Technology, a worldwide producer of gas sensors for over four decades. This sensor came from the same technology that brought you the GasAlert detector with its 40XV oxygen sensor and the GasAlertMicroClip X3 with its 40xLL high quality sensor you can depend on this technology to give you the most accurate and dependable service.

Great Performance and no false alarms to worry about – even in high risk areas.

Our 1-Sensor is not large, but it is powerful.
This compact sensor delivers some of the most precise and accurate readings no matter what the ambient temperature is. For example, it performs just as well in extreme cold (-40C) as it does in very warm temperatures (60C). You get the same reliability even in the most extreme conditions.

Extended Sensor Life

Not all gas detectors can give you long service without interruption. In fact, some gas sensors wear out fast, and you have to replace them at the most inconvenient times. This costs money and valuable time on the job. When you buy the Honeywell BW™ Ultra, you can receive as much as 5 years (60 months) of service, and it comes with a full 3-year guarantee. This is the best way to maintain a lean and efficient operation without sacrificing quality.

Honeywell Technology – giving you The Honeywell BW™ Ultra for more uptime and lower costs: Bump Tests Made Simple

How often do you bump test your gas detectors? Do you need a docking station for the task? Many people do. However, with TouchConnect™ you do not need docking stations. It finds all your units in range and takes care of matters.

Do you have an entire fleet of Detectors to look after?

TouchConnect™ can do more than just Bump tests. Suppose you want to update your set points for dangerous gas level alarms. This is done automatically when you use the TouchConnect™ device.

How many detectors are in your fleet? The larger the fleet, the easier it is when you have TouchConnect™.
No docking station needed. Just send TouchConnect™ where you need it, and it handles the updating task thanks to its Bluetooth capabilities.

Are you monitoring many gases at once?

Some confined spaces have multiple risks due to a combination of dangerous gases. This is where the Honeywell BW™ Ultra is very handy. You can set it up to handle a wide range of gases like LEL, CO, H2S, and O2. But this is not all. You have the option of monitoring a fifth dangerous gas. For instance:

SO2 (Sulfur Dioxide)

NH3 (Ammonia)

CL2 (Chlorine)

VOCs (Volatile Organic Compounds)

CO2 (Carbon Dioxide)

NO2 (Nitrogen Dioxide)

HCN (Hydrogen Cyanide)

Inert Atmospheres Solutions

What is Intelligent Inert Mode from the Honeywell BW™ Ultra? Suppose you need to check for low levels of oxygen in the air. This is a dangerous condition and must be constantly monitored. The Honeywell BW™ Ultra can automatically adjust alarms for inert environments and for normal environments.

The Value of Versatility More than just confined areas

Use your Honeywell BW™ Ultra for dependable gas monitoring in the most confined areas you have. Yet, it also works well as an everyday gas detector.

Do you have people working around ammonia refrigeration systems or chlorine gas? Maybe someone uses solvents for cleaning and the danger of VOCs exists. You only need to remove the Honeywell BW™ Ultra's sampling hose, and it becomes a valuable piece of protection gear. This cuts your equipment costs.

The Honeywell BW™ Ultra protects your business and crew with its innovative technology

Do you need to protect your workers from dangerous gases? You can turn to Honeywell Industrial Safety for help. We are the leading source for industrial safety gear and equipment. You can depend on Honeywell for the latest in cost effective and high-quality personal protection gear for all kinds of uses.

We help you lower your safety gear costs, risk factors, and you can enjoy fewer downtime issues and a more productive workforce. We also offer safety administration and analytics in addition to our other safety and safety monitoring equipment.

Part Number: HU-X1W1H1M1Q1-B-N

Altair 2X Gas Detector by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

10154080 Altair 2X Single Gas Detector, CL2 (0.5, 1.0) Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

10160028 Altair 2XP Single Gas Detector, NO2, Gray, Sleep by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

ADF25C Differential Probe by Test Products International

Selecting the correct oscilloscope probe ensures accuracy and can improve the performance of your test instrument. TPI offers a wide range of high quality oscilloscope probes designed to meet the most demanding applications.

The IP series monolithic probes have switchable attenuation and are available in 60 and 250MHz. These probes are ideal for technicians that need a basic oscilloscope probe.

The slimline design P and SP series probes are available in fixed or switchable attenuation. These series of probes are perfect for the technician needing additional features such as replaceable cable and interchangeable probe tip. The compensation adjustment for these probes is located in the BNC to eliminate noise pickup.

TPI also offers three models of high voltage differential probes all with high common mode rejection, wide bandwidth, and fast rise times. Differential probes enable the viewing of signals not referenced to earth ground and provide better performance than a matched pair of single ended oscilloscope probes when measuring these types of signals.

Several important factors must be taken into account when selecting the proper probe.

• The probe should have sufficient bandwidth and rise time for the test instrument and application. Choose a probe with at least an equal bandwidth as the scope it will be used with. For best performance a probe with twice the bandwidth as the scope should be selected
• For oscilloscope probes, the input capacitance of your oscilloscope should be within the compensation range specification of the probe. In addition, if your oscilloscope has readout function, select a probe with this capability
• For differential probes, make sure the maximum differential voltage is adequate for your application and the common mode rejection specification meets the requirements of the tests being performed.

Features

• Attenuation: Ratio of the output signal to the input signal. Attenuation should remain constant decreasing by 3dB only as the frequency increases to the maximum bandwidth.
• Bandwidth: The maximum -3dB frequency that can be expected.
• Cable Length: Length of the cable from the end of the probe to the end of the connector. It is important to use a probe with just enough cable length for your needs. Long cables increase the capacitance and propagation delay of the probe.
• Compensation Range: The range a probe can be compensated to match the input capacitance of the test equipment it is being used with.
• IEC 1010: Probes with the IEC 1010 category rating have been designed for safety.
• Input Impedance: The total resistance and capacitance as measured at the tip of the probe. This specification is used to define the loading effect of a probe. At frequencies under 1MHz the input resistance of the probe will have the most influence. At higher frequencies the input capacitance will have the most influence.
• Max Input Voltage: The maximum voltage the probe can be used at.
• Max Differential Voltage: The maximum differential voltage that can be measured by a differential probe
• Readout: Probes with this capability are compatible with readout function oscilloscopes that automatically detect and display the attenuation factor of the probe.
• Rise Time: The time required for the leading edge of a pulse to rise from 10% to 90% of its final value.
• CMRR: Common Mode Rejection Ratio. A measure of a differential probes ability to reject any signals common to both test points in a differential measurement

Applications

• Use TPI Probes with Bench Top, Portable, Analog, and Oscilloscopes
• Logic signal and waveform tests
• Measure voice / data signals
• Analyze power quality
• Test motor control circuits

Markets

• Electronic
• Communication
• Commercial
• Industrial

10154074 Altair 2X Single Gas Detector, CO-H2 (25, 100), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

Simplicity in operation
Dependable and gives more protection
Made for confined spaces
Enhanced safety protection

Honeywell BW™ Ultra – Detects 5 Gases

Specially Made for Confined Area Gas Detection

Safety is the most important consideration for your workers, and at Honeywell, we take safety very seriously. When you purchase the Honeywell BW™ Ultra, you have some of the best equipment for monitoring worker safety. Your Honeywell BW™ Ultra can monitor gases and take samples in the tightest of spaces. You enjoy important features like innovative sensor design, better connectivity, more comfort, with an easy to read screen. Enhanced durability gives you a safer place to work.

Are you looking for a portable gas monitor for checking out confined space? If so, you should consider the pumped Honeywell BW™ Ultra for these reasons:

• Permits and regulations compliance
• You and your crew can safely enter confined areas with confidence.
• Protect everyone in your organization from dangerous gas levels.

Why the Honeywell BW™ Ultra?

• Enhanced reliability thanks to 1-Series sensor capability
• Monitor gases remotely
• Better performance with enhanced features.

Important Features of the Honeywell BW™ Ultra

• Remote monitoring advantage
• Enhanced awareness for all situations involving dangerous gases
• TouchConnect™ lets you easily manage all your instruments
• Bigger and better LCD screen for checking out gases
• Better reliability thanks to the 1-Series sensor feature.

The Honeywell BW™ Ultra has a pump which is always running. This feature lets you take in gases, read gas levels and sample gases quickly and easily. The simple operation makes it a breeze to use

Do you want the most effective gas detection with the easiest to read and understand features?

Get ready for a new experience

If you need to monitor gases for confined spaces, you have to be extremely vigilant and constantly keep track of the atmospheric gases. The Honeywell BW™ Ultra is an easy to use detector with an easy to read screen so you can check gas levels quickly.

Portable and Durable

Your Honeywell BW™ Ultra is extremely tough and durable and is made for extreme conditions. For example, its IP66/68 rating ensures your detector is completely resistant to dust. It can withstand water submersion to a depth of nearly four feet. Drop it, and it is still working. Take it into the dustiest areas, and you have no problems with your instrument. You can detect hazardous gases with a high degree of confidence.

The Importance of Ergonomics on the job

Today most companies are concerned about ergonomics. It is important for sitting at desks but just as important are the instruments you hold in your hand. Our handheld equipment is comfortable and easy to operate as you check out the atmosphere. The Honeywell BW™ Ultra is a perfect fit for your hand. It is slimmer than most detectors. This helps to eliminate fatigue and increase worker comfort.

Just One Button

Operation is fast and simple. You only need to use one button with the Honeywell BW™ Ultra. It is also possible to wear your gas detector as you check out confided area atmospheres. It goes where you go, and the internal pump design means no snagging.

5 Sensor Power for Detecting Hazardous Gases

Here are the most common gases your Honeywell BW™ Ultra can detect and monitor in tight spaces:

• (CO) carbon monoxide
• (O2) oxygen
• (H2S) hydrogen sulfide
• (LEL) lower explosive limit gases – percent volume or percent LEL

5th sensor – this lets you decide which fifth gas you want to add to your detector. For example, maybe you want to include chlorine or ammonia. You may need to keep track of VOCs. If you are in the pulp and paper, water treatment, or chemical industries, the option of adding gases is very important. This is especially important in the O&G industries too.

Honeywell BW™ Ultra lets you monitor unsafe situations so you can make the right decision quickly and without hesitation.

Are you looking for increased production and enhanced safety? The Honeywell BW™ Ultra can make this happen. Here is an example:

Suppose your crew is working in confined spaces and the possibility of O2 level increases means a higher chance of fire or explosion. Keep a crew member outside the area with his Honeywell BW™ Ultra monitor in hand. He can keep a close eye on conditions because the Honeywell BW™ Ultra is so easy to use and read.

This is a perfect example or being proactive on your personal safety issues.

With high-risk work you need more than simple gas monitoring

Don't be afraid to use your Honeywell BW™ Ultra wherever you need it. Yes, it is designed and manufactured for gas detection in confined areas. However, it performs just as well in day-to-day work situations, with the help of the mobile phone app – Honeywell Safety Communicator.

Do you need to monitor the air in high-risk areas?

The Honeywell BW™ Ultra with the Honeywell Safety Communicator is Bluetooth compatible. You can monitor gases remotely from a wide range of areas including control rooms and offices. This gives you more protection from emergency situations involving gas hazards in the air.

The Value of "Hole Watch" Mode

In some areas, you need constant air gases monitoring to keep your workers safe from harm. For example, how many parts per million (PPM) is safe? Here is the easiest way to solve this issue. Set your Honeywell BW™ Ultra to "Hole Watch".

What Does "Hole Watch" Do?

With Hole Watch you can keep a close eye on specific gases in the air. For instance, if chlorine levels are getting higher, you can take the necessary steps to correct the problem or evacuate your crew. You'll see each gas level in real-time, and you can check the levels as they rise and fall before your eyes.

Watch gas levels increase or decrease – only with Honeywell detectors

Your gas monitoring person is the most important crew member you have. When you give him the Honeywell BW™ Ultra, he has the best possible equipment for the job.

Enjoy the most dependable and well-made sensor technology

Your Honeywell BW™ Ultra comes with the 1-Series sensor, and this technology was the result of a mutual effort by Honeywell and City Technology (a well-known worldwide gas sensor maker for the past 40 years). The 1-Sensor is part of a line of some of the finest sensors in industry like the 40XV from our GasAlert models and the City 40xLL O2 sensor which you will find in the GasAlertMicroClip X3. With this kind of pedigree, you can trust our 1-Sensor.

Are you tired of alarms when you don’t really need them?

Some of the best things are small and compact, and this is true with the 1-Sensor. Even though it is not large, it delivers accurate measurements on a consistent basis. Do you work in very warm or cold conditions?  The 1-Sensor in our Honeywell BW™ Ultra has been tested in conditions as hot as 60C and cold as -40C. This includes high humidity levels, transient pressure, and other extreme conditions.

As Many as Five Years of Continuous Service

If you owned other detectors besides Honeywell models, you probably noticed they can go through sensors rather quickly. In fact, you may spend a lot of company time and resources on sensor changes. This does not happen with the Honeywell BW™ Ultra (1-Series sensor technology). It can last as long as 60 months (5 years), and you receive a 3-year warranty.

This gives you better performance at a lower cost.

Do you want to streamline your maintenance? The Honeywell BW™ Ultra is the equipment for you with low-cost downtime reduction.

No Hassle Calibrating and Bump Testing

How often do you need to calibrate or bump test? With most detectors, you have to take them to your docking station. Yet, if you use TouchConnect™ technology bump tests and calibration can be automatic – no docking station required.

Do you manage a fleet of gas detectors?

You may need to reset gas alarms for specific gases. Use your TouchConnect™, and this job is done for you with no problems and no hassles. This is the perfect solution to managing your time and detectors. You don't have to use special software programs or docking stations. For those with large fleets of instruments, this is a "no brainer". No manual updates thanks to Bluetooth.

Tight spaces – No problem for this 5-gas detector

How many gas hazards must you monitor at one time? Your Honeywell BW™ Ultra can handle most typical gases you face each day in the workplace. This includes carbon monoxide, oxygen, LEL, and hydrogen sulfide. Do you need a fifth gas detection property? The Honeywell BW™ Ultra can do this. For instance:

Hydrogen Sulfide

Chlorine

Carbon Dioxide

Ammonia

Hydrogen Cyanide

VOCs

Inert Atmosphere Problems Solved

The Honeywell BW™ Ultra has a special Intelligent Inert function which lets the user check for low O2 levels in the air. It can adjust the alarm settings automatically no matter if you are in a normal or inert atmosphere. For example, an ascending alarm is needed for inert environments but not for standard environments.

More than Just a Confined Space Gas Monitor

Your Honeywell BW™ Ultra works perfectly in most confined areas. However, you have the same high-quality protection in all kinds of possible hazardous conditions.

For example, after using it for tight spaces, you can also use it for other areas, and it works just as well. Are some of your workers close to sources of deadly chlorine gas? Maybe some people must use solvents or paints during the day. Your Honeywell BW™ Ultra has a removable sampling hose. Just take it out, and you can wear it as a standard gas monitor. This helps to keep equipment costs down while maintaining safety.

The Honeywell BW™ Ultra – keeping your crew safe as well as your facility

When you need the best source for safety equipment and protection in hazardous conditions, Honeywell Industrial Safety is there for you. We help you protect the lives of your employees in a number of dangerous conditions. With Honeywell, your safety risks go down, and they even become an important advantage because you can lower safety equipment costs while increasing efficiency.

Honeywell is the leading producer of industrial safety products and technologies. Do you need head protection, protection from falls, or many other types of equipment? We offer both portable and fixed solutions to your needs. Check out the Honeywell BW™ Ultra today for the best in real-time hazardous gas technologies.

Part Number: HU-X1W1H1M1Q1-Y-N

10160030 Altair 2XP Single Gas Detector, Cl2, Gray, Sleep by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

G450-11010 G450 Multi-Gas Detector with Alkaline Battery, O2, LEL by GfG

GfG is one of the industry s leading producers of workplace safety products. Their products are safe, reliable, and customizable. Their state of the art research and development facility produces the most advanced products on the market. Additionally, their dedicated team of safety professionals works to ensure that each product can be equipped with customization tools and modifications to ensure that each product can be optimized to meet the most rigorous workplace safety standards. Introducing the G450 Multi-gas Detector, GfG is continuing its legacy as a safety leader.

G450 Multi-gas Detector

The G450 Multi-gas Detector continually measures up to four separate atmospheric gases. In confined spaces, the detector will monitor LEL combustible gas, oxygen, H2S, and CO. The easy to use G450 series of detectors is designed with user friendliness in mind. Many of its most common functions are operated with a single button, and the unit features a fully automatic calibration system. Users need only to attach the adaptor and flow gas to the sensors. The unit s GfG AutoCal system will automatically initiate the calibration sequence and will update the necessary information on the G450 Multi-gas Detector.

Long Battery Life

The G450 Multi-gas Detector also features a long life battery operation that is most efficient for workplace safety. The device has a batter life of up to 25 hours of continuous operation. With alkaline packs, the units are powered by 2 AA batteries, and when placed in the drop in cradle, the rechargeable battery packs can be fully recharged in less than 4 hours. The rechargeable packs have optional flash light LEDs to indicate charge level.

Triple Alarm System

This unit features an elaborate alarm system that is not to be missed. The triple alarm system features a loud audible alarm of 103dB, a vibrating alarm, and bright 360 wrap around LEDs with a colored backlit display for visual alarms. The alarm system ensures that users and those nearby are fully aware of possible environmental hazards. Additionally, the easy to read backlit display will light varying colors from green, orange, and red to intuitively notify users of the severity of the conditions.

Features

The G450 Multi-gas Detector is encased in a dust proof and highly water resistant housing. The housing even contains a built in rubber boot to help protect from regular wear and tear. Each unit is equipped with datalogging capabilities. The datalogger records and internally stores all activity and environmental conditions. Users can download this information to their computers and use it to research, analyze, and evaluate the jobsite environment.

The multi-gas detection system comes standard with a few accessories including a calibration adaptor, a training manual, and a training DVD. The rechargeable devices include the previous accessories and additional drop in cradle chargers and a wall power adaptor. Optional accessories include a datalogging kit, self powered attachable motorized sample pump, spare battery packs, and rechargeable battery packs. The breadth of available accessories helps to ensure that the G450 Multi-gas Detector can be customized to meet the needs of individual work spaces.

10153985 Altair 2XT Two-Tox Gas Detector, SO2/H2S-LC (SO2: 2, 5; H2S: 10, 15), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

ALTAIR 5XIR by MSA

In the face of potentially dangerous situations, workers need to feel certain that they are protected by the very best safety products on the market. MSA, the Safety Company, provides workers with the security they need to get the job done safely. The Altair 5X Multigas Detector is an industry leader in gas detection and safety features. With high standards of safety and advanced technology to ensure the reliability and longevity of the unit, workers can be certain that the unit represents the most advanced technology in gas detection.

Altair 5X Multigas Detector features

Exclusive features such as the MotionAlert and Instant Alert provide a sense of security when in potentially dangerous settings. When a user is motionless or disabled, MotionAlert activates and transmits an alert to others with the disabled user s location. The Instant Alert feature allows users to manually transmit an alert to others warning of a potentially hazardous situation.

The Altair 5X Multigas detector features an unparalleled flexibility and versatility designed to meet the unique needs of its many users. From high-resolution color displays or monochromatic LED screens to its 18 different language options, the detectors versatility is unmatched by competitors. Users can also find a wide variety of applications, kits, and accessories to better customize the unit.

Cell Sensor technology

Durability

Specifications

With an audible alarm of greater than 95 decibels, a visual alarm of 2 LED lights, and a standard vibrating alarm, the unit is well designed to alert users of potential gases. The devices can also effectively store up to 1000 events.

Users can also minimize risk of user errors by participating in MSA s online training and web content. This includes new Altair 5 X Multigas Detector simulation tutorials designed to simulate instrument operation.

10154040 Altair 2XT Two-Tox Gas Detector, CO/H2S (CO: 25, 100; H2S: 10, 15), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

10154073 Altair 2XT Two-Tox Gas Detector, CO/NO2 (CO: 25, 100; NO2: 2.5, 5), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

10154072 Altair 2XT Two-Tox Gas Detector, CO/H2S-LC (CO: 25, 100; H2S: 5, 10), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design