Firmware

GrowControl™ PHX pH/Temp Sensor by Agrowtek

GrowControl PHX and PHX+ are precision digital sensor transmitters for temperature and pH, plus optional ORP. Color LCD display and button interface model allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ port for connection to AgrowDose Pumps, LX1 USB link or LX2 ModLINK
• MODBUS RTU for industrial PLC applications: Available 4-20mA analog outputs
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

GrowControl™ SXC Indoor Climate Sensor by Agrowtek

GrowControl SXC Climate Sensor & Data Logger is a precision digital indoor sensor designed for hanging in growing environments featuring temperature, relative humidity, ambient light and optionally CO2 ppm.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl™ Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Air Temperature: -20 - 60°C
• Relative Humidity: 0-99% RH (80% max operating)
• Light (Irradiance): 0-1000 Watts/m2
• Carbon Dioxide (optional): 0-2000 ppm
• Real Time Clock (RTC): Battery Backup optional
• Fan aspirated with air filter for high accuracy

Features

• WiFi optional for direct browser access and web portal connection
• GrowNET™ Digital Communication Port
• MODBUS RTU via LX2 ModLINK Optional 4-channel 4-20mA analog outputs
• Durable powder-coated steel enclosure
• 1-Year Warranty
• Made in USA

GrowControl™ PHX pH, Temp Transmitter by Agrowtek

GrowControl PHX and PHX+ are precision digital sensor transmitters for temperature and pH, plus optional ORP. Color LCD display and button interface model allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ port for connection to AgrowDose Pumps, LX1 USB link or LX2 ModLINK
• MODBUS RTU for industrial PLC applications: Available 4-20mA analog outputs
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

Gas Alert MAX XT II Confined Space Meter with built in Sampling Pump

What it does

• Built in Sampling pump draws a remote gas sample from a confined space. It detects the 4 most common gas hazards in a confined space CO, H2S, LEL, and O2.

• Remote sampling to 75 ft
• Fast Startup time
• 2 year warranty including sensors
• Can operate in pump mode or diffusion mode
• Clear window to determine if filter needs to be changed
• Internal rechargeable battery provides 13 hours run time
• Loud 95 db audible alarm, bright visual alarms, strong vibration alarm
• Operates in most temperature extremes -4 Fahrenheit to 122 Fahrenheit
• Rubberized body
• Available in Yellow or Black

Sample from up to 75 feet away

Sampling mode or diffusion mode

Long battery life

Easy to update

What is the difference between the Gas Alert Max XT and the Gas Alert Max XT II?

Filters

Part Number: XTXWHMBNA

GrowControl™ PHXM+ pH, Temp + ORP/DO Transmitter by Agrowtek

GrowControl PHX and PHX+ are precision digital sensor transmitters for temperature and pH, plus optional ORP. Color LCD display and button interface model allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ port for connection to AgrowDose Pumps, LX1 USB link or LX2 ModLINK
• MODBUS RTU for industrial PLC applications: Available 4-20mA analog outputs
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

High performance gas protection you can customize

IntelliDoX smart docking is the perfect complement to Fleet Manager II software. With two proven winners working together, you get the benefits of an "all-star"; team, to take care of your detector fleet managing needs.

Instrument Management Streamlined and Simplified

With IntelliDox, it takes very little time to set up and install as many as five modules. The system has the ability to handle detectors separately or together. For example, suppose you need to bump test 2 units and it's time to calibrate 3. Thanks to your new system, you can do both tasks at the same time. Every module comes with separate screen, pump, and OS.

Enhanced configuration options at your fingertips

Do you need to change the maximum gas level alarm setting? This is just one of many parameters you can change when needed. You'll keep all your gas detectors working to your specs as long as you own them.

Enhanced data transfers and networking

When you need to backup or transfer bump test data, or other info, it's as easy as plugging in a USB device or Ethernet cable.

• System lets you expand your fleet up to 5 modules
• Fast configuration - easy to track compliance and set alarm functions
• Perfect for turnarounds - simple and quick
• Simple and efficient way for customize maintenance-free units

Compatible Gas Detectors

ConneX1
BW Clip Series (includes BW Clip 4)
GasAlertMicroClip Series (includes X3 and XL)

A New Style of Bump Testing

When you use FastBump it takes very little time to apply test gas for the bump testing procedure. This method is not only fast, it's highly efficient and you'll save money on calibrating gas.

Important IntelliDoX Features:

• Compatible detector support for bump tests, record-keeping, configuration, and calibration. These settings are updatable: Gas Reading shown with alarm; Bump test scheduling and calibration reminders; Alarm settings configuration; Enable non-compliance warning; Choose how time is displayed; Event Logs data transfer; Hibernation Detection; Firmware updating
• Highly-efficient FastBump testing eliminates bottlenecks. You don't lose a lot of gas during the purge cycle.
• Network connection via Ethernet port
• Quick setup - you don't need special tools
• USB port - network access not required for data retrieval or module configuration
• Automated span calibration and bump testing
• Connect up to five modules together while keeping the option of independent operation (each unit has a display and keypad).

Specifications for Your IntelliDox Docking System

Size: single module is 5.4" width x 14.2" height x 4.3" depth. (13.8 x 36.2 x 10.9 cm)
Weight: 4.2 lb (1.91 kg)
Power supply: 12 V / 8.33A ITE supply
Real-time clock: Both time & date stamp
Communications method: Two-way infrared communication between docking module and detector

External interface

• USB - 1 port
• Ethernet - 1 port

Menu navigation

• Display settings adjustments
• Change date and time
• Gas inlet configuration options
• Review IntelliDoX module
• Password protection is optional
• UI display language: German, English French, Spanish, Portuguese

Automatic testing

• Standard bump - 40 seconds
• FastBump - 10 seconds

Pump

• Flow Rate: 350 ml/min
• Independent pump (each IntelliDoX docking module unit)

Data Storage (internal): 2 GB

Instrument Management System: Fleet Manager II, version 4.0 or newer

Warranty: Full two-year (24 month) warranty

Ratings: Device complies with the FCC Part 15 and ICES-003 Canadian EMI requirements. Operation is subject to these conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation.

Options & Accessories

Portable Kit is a fully portable IntelliDoX testing station in a Pelican case. Each kit comes with: two docking modules, tubing, ethernet cable, demand flow regulator, AC power adaptor, and more.

Multi-Inlet Key

User can configure each IntelliDoX module for more than one calibration gas connection

A complete list of kits & accessories is available.

DUE TO ONGOING RESEARCH AND DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Part Number: DX-ULTRA

MGC-DOCK 4 Bay Calibration and Bump Test Station by Gas Clip Technologies

Gas Clip Technologies Clip Dock is an all in one docking station designed for maximum testing efficiency and portability. Housed in a rugged Pelican© case with robust USB memory, this station will be able to accurately test and record all monitor data while reducing the testing time and gas usage.

Traditional docking stations are only designed to test one instrument at a time, resulting in time consuming testing periods as well as unnecessary usage of testing gas. Gas Clip Technologies has significantly improved both testing time and test gas usage with the Clip Dock; users can now test 4 instruments simultaneously saving both time and money. Each Clip Dock comes with the following standard features:

• Test 4 units at one time, up to 12 instruments in a minute
• Easy 1 button operation
• Robust rechargeable internal battery, hundreds of tests before recharging
• Internal gas cylinder regulator and pressure gauge
• 2 GB USB memory for bump test and event log storage
• Optional unit configuration and firmware updates via GCT Manager Software
• Rugged Pelican© case or Slim Dock case
• No computer required to operate
• Model Numbers: SGC-DOCK (Standard); SGC-DOCK-SLIM (Slim Dock)

Features:

Unit Configuration/Firmware Updates: In order to keep your fleet of gas detectors compliant with specific settings, we allow for the Clip Dock to program each unit during either bump testing or calibration. The programmable fields are as follows: User ID, Calibration Interval, Bump Interval, Self-Test Interval, Low Alarm, High Alarm, Show Sensor Readings, Hide Bump Due LED and Hide Clock. For example, if your company or facility requires each detector on site to have specific alarm set points and a bump test interval, instead of programming each unit individually, the instruments can be group programmed while simultaneously bump testing (4 units at a time per dock) using our GCT Manager software. As firmware updates become available, we can program each Clip Dock to update units during bump testing and calibration. Facility safety standard compliance for single gas detectors is now easily achievable.

Event Data and Record Storage: In addition to performing tests, unit configurations and firmware updates, the Clip Dock also stores important information about both the docking station and units tested. All tests performed on the docking station can be accessed from either the USB directly or using the GCT Manager software. Each bump test and calibration event is recorded and logged by date, time and serial number. Along with the test records, the individual event logs from each unit are saved. At the time of the test, the detector transmits its event log to the memory. By default, the station will save the previous 10 event logs.

Slim Dock Case: Gas Clip Technologies offers a wall mount solution for our Clip Dock. Instead of being housed in a Pelican© case, we provide a slim cabinet type case that can be easily mounted on a wall. This option can be selected at the time of order or can be ordered separately to convert your existing Clip Dock to a Slim Dock. This option is a perfect fit for facilities or office environments.

Gas Clip Technologies GCT
Manager software provides users the ability to communicate and program the Clip Dock or Slim Dock via IR Link or USB memory stick. In order to communicate with a Clip Dock system via infrared, an IR Link is required. Following is a full list of programmable features offered when communicating with the Clip Dock or Slim Dock using the GCT Manager Software via the IR Link:

• Docking Station Location
• Number of Event Logs
• Auto Power-Off Time
• Gas Cylinder Expiration Date
• Gas Cylinder Lot #
• Gas Cylinder Concentration
• Feature Administration Controls
• Station Test Logs
• Individual Instrument Logs
• Inventory Report
• All IR Link Software features

GD-70D-CO-03 GD-70D Smart Transmitter, CO (carbon monoxide), 0-300 ppm with ESU-23 Sensor by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

Making single-gas detection portable and effective with next-generation capabilities.

Manageable and Lightweight

Featuring a low, lightweight profile and a practical design, the Honeywell BW™ Solo is ideal in any working environment.

Making simple detector service a priority

To avoid having to disassemble the detector to replace a sensor filter, sensor, or battery, the Honeywell BW™ Solo offers a simple service solution. Just pop open the appropriate door on the detector for easy replacement.

Beyond hydrogen, oxygen, and carbon monoxide detection

In any workplace, including steel manufacturing and power plants, the Honeywell BW™ Solo offers a range of sensors including:

• Ammonia (NH₃)
• Ozone (O₃)
• Hydrogen sulfide (H₂S)
• Sulfur dioxide (SO₂)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

Increasing worker safety with the 1-Series sensor, the first in a single-gas detector.

As a next-generation detector, the Honeywell BW™ Solo uses the 1-Series sensor for fast response, accuracy, reliability, and a long life in any type of environment.

Adding to the gas types CO, H₂S, and O₂

Currently, the 1-Series sensor provides fast response for CO, H₂S, and O₂, with additional gas types coming onboard shortly. The design is smaller, about a third of the height of traditional sensors, and features a compact, square design for rapid gas diffusion and response times.

Extraordinary life and warranty.

With the 1-Series sensor, expect up to 5 years of sensor life with typical gas detection use, and the benefits of a 3-year warranty. With limited downtime and extended duty cycle, you have peace of mind in knowing this reduces the cost of ownership.

Developed by City Technologies – a Honeywell company.

The 1-Series sensor is developed by City Technologies, the Honeywell company responsible for the development of the 40XV and the 40xLL oxygen sensors used in the Honeywell BW detector. In addition to 40 years of experience, they provide quality and exacting standards to their sensor development.

Accuracy and performance.

Nuisance alarms creating problems? Adding the 1-Series sensor eliminates these false alarms while providing accurate readings in environments with transient pressure, high humidity, and temperatures from -40°C to 60°C.

Sensor switch-out without a hassle.

The design of the 1-Series sensor means there is no need to open the housing to expose the printed circuit board or interior circuitry to replace a sensor. It is as simple as taking out the old and dropping in the new.

Step up to automated fleet management and centralized data.

Combining the Honeywell BW™ Solo with the IntelliDox and the Honeywell SafetySuite Device Configurator software allows for optimal management of data and detectors.

The IntelliDox advantage for automation, configuration, and data centralization.

The IntelliDox dock allows the detector to be placed in position and automatically transfer data and complete requested actions. These actions include setting bump reminders, doing bump tests, calibrating the detector, or change set points. Connecting to a USB or Ethernet connection allows fleet management software to automatically transfer data to a computer for centralization.

The IntelliDox can also be grouped. Each continues to function as an independent system with an LCD, keypad, and pump, but shares both power and gas for calibration.

The Device Configurator software advantage.

Windows-based, the Device Configurator software allows for easy access to data, configuration of set points for alarms, fleet firmware updates, and other actions that improve productivity, safety, and compliance.

Immediate notification through the cloud.

Using the subscription service for the Honeywell SafetySuite Device Manager in the cloud allows your company to:

• Monitor all gas detectors in real-time through one easy to use dashboard. This includes multiple detectors across multiple sites.
• Customize reports
• Provide easy, centralized data for audits, investigations, and review
• Real-time notification of alarms via text or email
• Added compliance features

The advantage of using the mobile app.

The Honeywell BW™ Solo can be paired or linked with any smartphone, allowing the Device Configurator app to be a control for the detector. This allows the user to configure, set up the detector, determine alarm set points, and update firmware using Bluetooth Low Energy (BLE) at a distance of up to 6 meters away.

The app can be used to read the last calibration or bump data, when it occurred, and who it was completed by. It can also provide a certificate that can be mailed to required stakeholders for requirements for launch.

Eliminates the needs for docking stations.

For fleets, using a wireless option with the Honeywell BW™ Solo eliminates the need to have docking stations to transmit data. Using BLE, the app can read information and transfer it to the desktop software for centralized data management and reporting.

Increasing worker safety monitoring for remote safety managers.

The Safety Communicator app from Honeywell allows the safety manager or designated managers to see vital data without the need for docking. When the app and detector are paired through a smartphone, data is transferred in real-time to the monitoring software, where it is accessible by any internet-connected device.

Combining worker safety and increased compliance.

Practical one-button control and operation.

Using the Honeywell BW™ Solo is easy in any environment, even when wearing gloves. A single button is used for manual operation of the detector, or it can be configured with the Honeywell SafetySuite Device Configurator software. Both options allow for latching alarms, configuring set points, and adjusting parameters. It provides measurements for STEL (short-term exposure levels), TWA (time-weighted average) as well as peak gas readings over 24 hours.

Options for compliance or out of compliance determination

For at a glance confirmation of the detector being in or out of compliance, the IntelliFlash™ system allows for either option. A green flashing light signals the detector is correctly monitoring and has had a bump test.

With the noncompliance flash activated, a red light indicates the need for a battery replacement, calibration, bump test, or if there has been a detected gas event.

Combining auditory and visual alarms

In addition to a loud, distinct alarm with the Honeywell BW™ Solo, there is also the additional red LED lights around the display. The detector also vibrates, making it easy to see and hear in any location.

Simple to set up and to operate.

Know locations

By assigning the detector to an employee or a location, gas events are easy to pinpoint.

The peak 24-hour rolling reading advantage

Peak gas levels that are below the alarm settings are recorded with the Honeywell BW™ Solo. These are set on a rolling 24-hour basis, allowing early detection of potential safety issues.

Language options around the world

For international use, the gas readings on the detector can be displayed in all major languages.

Part Number: BWS-C-Y

SSX34 Superheat & Subcooling by Fieldpiece

Most non-electrical HVACR problems are charge related. Many systems in operation are undercharged or overcharged. This can cause decreased efficiency and compressor failure. The higher the efficiency of a system, the more critical it is that it is charged properly.

The Fieldpiece Superheat and Subcooling for Air Conditioning and Refrigeration meter, model SSX34, measures suction line, or low side, line temperature and pressure. It then calculates actual superheat in real time using built in P/T charts. It also measures liquid line, or high side, line temperature and pressure, and calculates actual subcooling. Use it to get actual superheat on R-22, R-410A, R-134A, and R-404A fixed orifice systems and actual subcooling on TXV / TEV regulated systems.

Use the "T" fitting to charge to actual superheat or subcooling by putting the SSX34 in-line between your refrigerant bottle and the system. Use it to monitor superheat and subcooling when recovering too.

• Measures suction/liquid line pressure and temperature to calculate and display superheat/subcooling
• Display pressure in PSI or kPa
• Display temperature in °F or °C
• Display superheat in °F or °C
• Display subcooling in °F or °C
• Compatible Refrigerants: R 134A, R 404A, R 410A, R 22
• Includes "T"
• Accepts K-type thermocouples. ATC1 included
• Magnetic hanger
• Thermocouple calibration pot on meter face
• Atmosphere pressure calibration

Competitive Advantages

Many AC system analyzers include PT charts you don't want or need. The SSX34 gives you actual superheat and subcooling in real time like the expensive analyzers do in a rugged, compact design. The SSX34 constantly displays refrigerant line pressure, toggles between line temp actual superheat, and actual subcooling for four of the most common refrigerants found in HVAC/R field service. If need you need more refrigerants in your daily work, check out the HVAC GUIDE® System Analyzer (link to HVAC GUIDE PRODUCT PAGE), models HG2 or HG3, and the ASX14 for a system analyzer and then some. P/T charts for 12 of the most common refrigerants you use in HVACR are included, as well as the software and firmware to generate for printable work orders for customers. For even easier refrigeration testing take a look at the ATC1R pipe clamp especially designed to fit smaller refrigerant lines.

Includes

• Real-time Superheat and Subcooling for A/C and Refrigeration - SSX34
• Pipe-Clamp Thermocouple 3/8" to 1 3/8" for Air Conditioning - ATC1
• 9V Battery (installed)
• Operator's Manual

PEC+U PECPlus Firmware Updater by Schaefer

Our broad range of sensors and manual/automatic controls allow dairymen, greenhouse operators, plant managers and others to control fans and heaters and optimize thermal comfort in their facilities.

SGC-DOCK Clip Dock-Case Includes Regulator, Power Supply, and USB Memory by Gas Clip Technologies

Gas Clip Technologies Clip Dock is an all in one docking station designed for maximum testing efficiency and portability. Housed in a rugged Pelican© case with robust USB memory, this station will be able to accurately test and record all monitor data while reducing the testing time and gas usage.

Traditional docking stations are only designed to test one instrument at a time, resulting in time consuming testing periods as well as unnecessary usage of testing gas. Gas Clip Technologies has significantly improved both testing time and test gas usage with the Clip Dock; users can now test 4 instruments simultaneously saving both time and money. Each Clip Dock comes with the following standard features:

• Test 4 units at one time, up to 12 instruments in a minute
• Easy 1 button operation
• Robust rechargeable internal battery, hundreds of tests before recharging
• Internal gas cylinder regulator and pressure gauge
• 2 GB USB memory for bump test and event log storage
• Optional unit configuration and firmware updates via GCT Manager Software
• Rugged Pelican© case or Slim Dock case
• No computer required to operate
• Model Numbers: SGC-DOCK (Standard); SGC-DOCK-SLIM (Slim Dock)

Features:

Unit Configuration/Firmware Updates: In order to keep your fleet of gas detectors compliant with specific settings, we allow for the Clip Dock to program each unit during either bump testing or calibration. The programmable fields are as follows: User ID, Calibration Interval, Bump Interval, Self-Test Interval, Low Alarm, High Alarm, Show Sensor Readings, Hide Bump Due LED and Hide Clock. For example, if your company or facility requires each detector on site to have specific alarm set points and a bump test interval, instead of programming each unit individually, the instruments can be group programmed while simultaneously bump testing (4 units at a time per dock) using our GCT Manager software. As firmware updates become available, we can program each Clip Dock to update units during bump testing and calibration. Facility safety standard compliance for single gas detectors is now easily achievable.

Event Data and Record Storage: In addition to performing tests, unit configurations and firmware updates, the Clip Dock also stores important information about both the docking station and units tested. All tests performed on the docking station can be accessed from either the USB directly or using the GCT Manager software. Each bump test and calibration event is recorded and logged by date, time and serial number. Along with the test records, the individual event logs from each unit are saved. At the time of the test, the detector transmits its event log to the memory. By default, the station will save the previous 10 event logs.

Slim Dock Case: Gas Clip Technologies offers a wall mount solution for our Clip Dock. Instead of being housed in a Pelican© case, we provide a slim cabinet type case that can be easily mounted on a wall. This option can be selected at the time of order or can be ordered separately to convert your existing Clip Dock to a Slim Dock. This option is a perfect fit for facilities or office environments.

Gas Clip Technologies GCT Manager software provides users the ability to communicate and program the Clip Dock or Slim Dock via IR Link or USB memory stick. In order to communicate with a Clip Dock system via infrared, an IR Link is required. Following is a full list of programmable features offered when communicating with the Clip Dock or Slim Dock using the GCT Manager Software via the IR Link:

• Docking Station Location
• Number of Event Logs
• Auto Power-Off Time
• Gas Cylinder Expiration Date
• Gas Cylinder Lot #
• Gas Cylinder Concentration
• Feature Administration Controls
• Station Test Logs
• Individual Instrument Logs
• Inventory Report
• All IR Link Software features

0614 0275 Pt100 Temperature Probe (need cable 0430 0100) by Testo

The new digital Pt100 precision temperature probe enables high-precision temperature measurements in liquids and pastes. With an accuracy of ± 0.05 °C in the 0 to +100 °C range, the probe is suitable, in conjunction with the testo 480, for laboratory applications for example, where every decimal place counts.

The temperature probe is a digital probe with an intelligent calibration concept. You can adjust the probe using the EasyClimate software and achieve a zero-error display.

Applications

You can use the precision temperature probe (in combination with the measuring instrument) for the following industrial and laboratory applications, for example:

• Use as a working standard in calibration processes
• Measuring temperatures in liquids for quality assurance
• Use as a reference measuring instrument in laboratories
• Precision temperature measurement in liquids in laboratories

Please note that you need to use the firmware version V1.08 with this probe.

• Pt100 temperature probe for measurements in liquids and pastes
• High-precision temperature measurement
• For use in laboratories, in industry and in food control
• Measuring range: -80 to +300 °C

Includes:

Pt100 precision temperature probe including instructions for use.

GD-70D-B2H6 GD-70D Smart Transmitter, B2H6 (diborane), 0-0.30 ppm by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GD-70D-ACET GD-70D Smart Transmitter, CH3COOH (acetic acid), 0-030 ppm by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GD-70D-CLF3-A GD-70D Smart Transmitter, ClF3, (chlorine trifluoride), 0-0.60 ppm, with A Type Sensor by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

GrowControl™ SXE Indoor Climate Sensor by Agrowtek

GrowControl™ SXE Environmental Monitor, Logger & Controller is a precision digital indoor climate sensor with 3-button LCD display featuring temperature, relative humidity, ambient light and optionally CO2 ppm sensors. Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl™ Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Air Temperature: -20 - 60°C
• Relative Humidity: 0-99% RH
• Light (Irradiance): 0-1000 Watts/m2
• Carbon Dioxide (optional): 0-10,000 ppm
• Real Time Clock (RTC): Battery Backup Included
• Fan aspirated with air filter for high accuracy

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ Digital Communication Port
• MODBUS RTU via LX2 ModLINK, Optional 4-channel 4-20mA analog outputs
• Durable powder-coated steel enclosure
• 1-Year Warranty
• Made in USA

0555 6721 Dewpoint Switch (includes 0554 0647 sintered stainless steel fileter as standard) - 30 to + 30°C temperature pressure dewpoint (tpd) by Testo

The testo 6721 is a low-budget dewpoint guard with two switch contacts for controlling and monitoring refrigeration and adsorption dryers.

The continuous monitoring and control of compressed air dryers was up to now often not economically viable. The testo 6721 closes this gap. Whether integrated as a component in the dryer or pneumatic machine, or installed by the customer: With this compact solution, you increase the efficiency of your dryer. At the same time, you avoid follow-on damage to systems and products caused by excessive humidity in the compressed air.

• Measurement of dewpoints in the measuring range -45 to +30 °Ctd
• Inexpensive solution for monitoring cooling dryers
• Two switch outputs for monitoring limit values are available as outputs
• Long term stable and condensation-proof Testo humidity sensor (polymer sensor) guarantees highest process security
• P2A software for parameterization, adjustment and analysis saves time and costs in commissioning and maintenance
• Low-budget solution for monitoring refrigeration dryers
• Compact design allows easy integration into a refrigeration dryer or pneumatic machine
• Parameterization of unit and scale
• Setting 2 limit values and hysteresis
• testo 6721 adjustment: 1-point
• Reset to factory settings
• Testing of switch outputs
• Requesting of max./min. values
• Parameterization and adjustment history
• Serial number and firmware version can be called up

GrowControl™ PHX+ pH, Temp + ORP/DO Transmitter by Agrowtek

GrowControl PHX and PHX+ are precision digital sensor transmitters for temperature and pH, plus optional ORP. Color LCD display and button interface model allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ port for connection to AgrowDose Pumps, LX1 USB link or LX2 ModLINK
• MODBUS RTU for industrial PLC applications: Available 4-20mA analog outputs
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

GD-70D-CH3NH2 GD-70D Smart Transmitter, CH3NH2, (methylamine), 0-15 ppm by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States