Probe

GND-25 1/4" I.D. Probe Gland (temperature probes) by Agrowtek

Probe glands allow installation of pH, ORP, EC and temperature probes directly inline with pump feeds or a dedicated recirculating pump loop. Inline installation extends probe life by washing away debris and keeping probes clean. Increased accuracy also results from recirculation of liquid to provide a more homogenous mixture.

• 1/2" NPT Male Pipe Thread
• Nylon body

GND-50 1/2" I.D. Probe Gland (pH, EC, ORP probes) by Agrowtek

Probe glands allow installation of pH, ORP, EC and temperature probes directly inline with pump feeds or a dedicated recirculating pump loop. Inline installation extends probe life by washing away debris and keeping probes clean. Increased accuracy also results from recirculation of liquid to provide a more homogenous mixture.

• 1/2" NPT Male Pipe Thread
• Nylon body

0618 0275 High-precision Immersion/Penetration Probe, Digital, Pt100 Probe by Testo

Ideal for measurements in laboratories, in industry and also in food quality control. The high-precision immersion/penetration probe with Pt100 temperature sensor, which features long-term stability, is impressive in applications where every decimal place is relevant:

• Ideal for use as a working standard in calibration processes
• High-precision temperature measurement in liquids and pastes

Particularly useful: Store individual readings directly in the measuring instrument itself (please order separately) by pressing the button on the probe. The measurement assistant in the measuring instrument makes for intuitive operation and error-free measurement. Reading trends are reliably recorded thanks to the convenient input of measurement time and measuring cycle.

Intelligent calibration concept

With the digital temperature probe you benefit from exceptionally accurate measurement results, because the measuring instrument makes measurement uncertainty a thing of the past. You only need to send the probe in for calibration - so the measuring instrument remains in continuous use. Thanks to the adjustment function in the measuring instrument, the calibration results can be stored at up to six measuring points. This ensures a zero-error display.

• Accuracy of up to ±0.05 °C
• For measurements in liquids and pastes
• Ideal for use as a working standard
• Intelligent calibration concept with zero-error display

Outstanding accuracy: The high-precision Pt100 immersion/penetration probe (with the compatible measuring instrument) achieves a system accuracy of up to ±0.05 °C, with a resolution of 0.001 °C.

Delivery Scope

1 x high-precision immersion/penetration probe (digital) with fixed cable (cable length 1.4 m) and calibration protocol.

WD-17001-10 InnoCal NIST-Traceable Calibration; Thermocouple Probe (Probe Only) by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

Calibrations on thermocouple probes are performed using direct comparison in high-stability liquid and dry baths using high-precision PRT's and SPRT's and displays. Measurements can be performed at four points between -197C and 1300C. Points are generally selected at standard ITS-90 points across the range of the probe but customer-specified points can be accommodated. This calibration is for the thermocouple probe only; if you want the probe calibrated with a meter as a system, see sku 17002-10.

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.

WD-17001-04 InnoCal NIST-Traceable Calibration; RTD Probe (Probe Only) by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

InnoCal's Metrology Laboratory is accredited to ISO/IEC Guide 25 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate
• Four test points across range of instrument
• Meter: -200 to 1000°C (-328 to 1832°F); Probe and System: -80 to 1000°C (-112 to 1832°F)
• Actual range is dependent on type of probe

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.

WD-17001-06 InnoCal NIST-Traceable Calibration; Thermistor Probe (Probe Only) by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

InnoCal's Metrology Laboratory is accredited to ISO/IEC Guide 25 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate
• Four test points across range of instrument
• Meter, probe, and system: -80 to 150°C (-112 to 302°F)

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.