Extreme

44525R Gasurveyor 525R 4 Button Portable Gas Detector - LEL, VOL, CO - Rechargeable by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

44533 Gasurveyor 533 4 Button Portable Gas Detector - LEL, VOL, O2, CO by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

WD-35625-45 TempTestr® Infrared IR Food Thermometer by Digi-Sense

Ensure your food is at the proper temperature without contamination worries!

Our TempTestr IR Food model is optimized for the food preparation industry. It offers ±1%/1°C (2°F) accuracy in the HACCP critical temperature range of 0 to 60°C (32 to 150°F). This tester s high spectral response lets you take readings through steam. Laser sighting lets you pinpoint your exact target.

• Includes 9V battery, wrist strap and Instruction Manual
• Offers high ±1°C accuracy at HACCP critical temperature ranges
• Infrared temperature measurement provides safe, noncontact readings
• Laser sighting pinpoints your exact target
• °F/°C selectable
• Simple one-handed operation just point and press button! Extremely rapid response time 1/2 second for 95% response

VPE Ultrasonic Leak Detector by Superior AccuTrak

The Patented Superior AccuTrak® VPE represents state-of-the-art technology for pinpointing leaks is air conditioning and refrigeration systems. AccuTrak® is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using a technology called "heterodyning" it translates the sound to a lower frequency which your ear can interpret. AccuTrak maintains the original sound characteristics making it possible to distinguish leaks from other competing background sounds. AccuTrak is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy.

VPE Basic Kit

Superior AccuTrak® advanced patented technology has never been so affordable! The AccuTrak® VPE Basic Kit is for technicians who require only the essentials to detect leaks using airborne ultrasound. As with all AccuTrak® instruments, the VPE finds leaks for any kind of gas or refrigerant without changing tips or components. Works equally well to find compressed air leaks, nitrogen leaks even vacuum leaks! AccuTrak® can find leaks as small as the equivalent of 1.5 oz per year of refrigerant, or can hear a 5 psi leak up to 30 feet away.

Kit Includes:

• VPE Leak Detector
• Headset
• Battery
• Hard Case

VPE Standard Kit

The AccuTrak® VPE Standard Kit offers literally twice the functionality of the Basic Kit with the addition of the AccuTrak® Touch Probe and Waveguide. Utilizing the Touch Probe, the VPE can troubleshoot thermal expansion valves in less than 5 minutes, and find faulty steam traps in just seconds! The Touch Probe can also be used to detect worn bearings and faulty valves. With the Waveguide attachment a technician can gain better access to hard-to-reach places and better determine the location of leaks that would otherwise be inaccessible. This is our most popular kit for a reason!

Kit Includes:

• VPE Leak Detector
• Headset
• Battery
• Hard Case
• Touch Probe
• Waveguide

VPE Professional Kit

The AccuTrak® VPE Professional Kit is designed for technicians who work in noisy places, or who regularly need to find smaller leaks. The VPE Professional Kit includes all the great features of our VPE Standard Kit upgraded with professional Noise Cancelling Headphones and a larger case to keep everything together. These high quality headphones eliminate all background noise, allowing a technician to effectively find the smallest leaks even in very loud environments. You can choose the standard style professional headphones, or the hardhat compatible version same price!

Kit Includes:

• VPE Leak Detector
• Battery
• Touch Probe
• Waveguide
• Noise Blocking Headphones
• Large Carry Case

VPE Plus Kit

The AccuTrak® VPE Plus Kit is designed for technicians looking to take full advantage of all the VPE s many capabilities. The VPE Plus Kit includes everything in our Standard Kit PLUS our powerful Burst Tone Sound Generator! The sophisticated Burst Tone can artificially pressurize any vessel or space with ultrasonic sound, allowing a technician to quickly scan for leaks even where there is no actual pressure differential! The VPE Plus Kit is ideal for technicians who test refrigerator door and window seals, or any other non-pressurized seal or vessel. The VPE Plus Kit is also great for Energy Audits and Surveys, and finding air leaks and sources of air infiltration in homes, aircraft, ships, and buildings.

Kit Includes:

• VPE Leak Detector
• Headset
• Battery
• Hard Case
• Touch Probe
• Waveguide
• Sound Generator

VPE Pro-Plus Kit

The AccuTrak® VPE Pro-Plus Kit is our most comprehensive VPE Kit, for the serious technician who needs the maximum capability from an ultrasonic instrument. The VPE Pro-Plus Kit includes the upgraded professional Noise Cancelling Headphones PLUS the powerful Burst Tone Sound Generator, in the larger case to keep everything together. The VPE Pro-Plus Kit offers unrivaled functionality and versatility for a fraction of the cost of any competitive system with similar performance. Find any kind of leak, troubleshoot internal mechanical problems, find bad gaskets and door seals and do it all well, in any environment! If you do a variety of work, and need a cost effective professional kit that can do it all, the Superior AccuTrak® VPE Pro-Plus Kit is for you.

Kit Includes:

• VPE Leak Detector
• Battery
• Touch Probe
• Waveguide
• Sound Generator
• Noise Blocking Headphones
• Large Carry Case

Applications:

• Leak Detection: Air, Vacuum, Refrigerants; ANY GAS!
• Steam Traps: Detect live steam loss in seconds!
• Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!
• Bearing Wear: Hear wear and lubrication problems before damage is done!

Features:

• Audio Output: 0 Hz to 4 kHz Natural Sound conversion allows you to Hear the Leak, and distinguish leaks from mechanical or other background ultrasound.
• Visual Output: 10 element bar graph provides quick and intuitive visual indication to presence of and relative strength of ultrasound.
• Adjustable Sensitivity: allows operator to quickly identify leaks from a distance, and then zero in on the exact location of the leak.

Capabilities:

• Capable of detecting a 5 psi leak out of a 0.005" (5/1000 inch) hole, 20 to 30 feet away depending on background noise.
• Easily detects any gas that generates ultrasonic sound during flow including vacuum leaks.
• Capable of detecting leaks equivalent to 1.5 oz/year of Refrigerant.
• Works equally well for compressed Air or Nitrogen.
• Not affected by wind or high concentrations of leaked gas or refrigerant.

Kits for Every Application

Whether you only need the basic functions of the VPE or you plan to take full advantage of the instrument's diverse capabilities, we have a kit that will meet your needs! Click the "Find Your Kit" tab above to learn more.

Advantages Versus Sniffers

• AccuTrak® VPE is a much more accurate and reliable instrument for detecting single and multiple leaks.
• AccuTrak® VPE can detect any type of refrigerant gas including nitrogen.
• AccuTrak® VPE detects both vacuum and pressure leaks.
• AccuTrak® VPE is effective in gas saturated areas and under windy conditions.
• AccuTrak® VPE does not require the introduction of tracer gases into the system, which can be ozone depleting when vented, and can also be harmful to ones health.
• AccuTrak® VPE is battery powered for cordless operation

Advantages versus other Ultrasonic Leak Detectors

• AccuTrak® VPE is #1 in technology. We wrote the book on ultrasonic leak detection, our patented instruments lead the industry!
• AccuTrak® VPE is the original! it is not a copy.
• AccuTrak® VPE is the most durable unit available, with the best warranty. The face of the unit is sealed with no pin holes/speakers for foreign objects to enter.
• AccuTrak® VPE has more dynamic range, and wont overload in loud areas.
• AccuTrak® VPE gives true audio sound reproduction instead of the "beeps and squeals" of other instruments.

VPE-GN Professional Kit by Superior AccuTrak

The Patented Superior AccuTrak® VPE-GN Gooseneck represents state-of-the-art technology for pinpointing leaks in air conditioning and refrigeration systems. The new 9½ flexible Gooseneck provides better detection in hard-to-reach places, and is great for automotive applications too. AccuTrak® is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using the latest "heterodyning" technology it translates the sound to a lower frequency which your ear can interpret. The VPE-GN maintains the original sound characteristics making it possible to distinguish leaks from other competing background sounds. AccuTrak® is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy. Like all Superior AccuTrak® instruments, the VPE-GN easily detects leaks of ANY gas or refrigerant, compressed air, and even vacuum leaks.

The AccuTrak® VPE-GN Professional Kit is designed for technicians who work in noisy places, or who regularly need to find smaller leaks. With the sensor at the end of the 9-1/2 long flexible GooseNeck you get full sensitivity all the way into those hard-to-reach places. The VPE-GN Professional Kit includes all the great features of our VPE-GN Standard Kit upgraded with professional Noise Cancelling Headphones and a larger case to keep everything together. These high quality headphones eliminate all background noise, allowing a technician to effectively find the smallest leaks even in very loud environments. You can choose the standard style professional headphones, or the hardhat compatible version same price!

Kit Includes:

• VPE-GN Leak Detector
• Battery
• Waveguide
• Noise Blocking Headphones
• Large Carry Case

Applications:

• Leak Detection: Air, Vacuum, Refrigerants; ANY GAS!
• Steam Traps: Detect live steam loss in seconds!
• Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!
• Bearing Wear: Hear wear and lubrication problems before damage is done!

Features:

• Gooseneck Configuration: allows operator to get accurate readings in hard to reach places.
• Audio Output: 0 Hz to 4 kHz Natural Sound conversion allows you to Hear the Leak, and distinguish leaks from mechanical or other background ultrasound.
• Visual Output: 10 element bar graph provides quick and intuitive visual indication to presence of and relative strength of ultrasound.
• Adjustable Sensitivity: allows operator to quickly identify leaks from a distance, and then zero in on the exact location of the leak.

Capabilities:

• Capable of detecting a 5 psi leak out of a 0.005" (5/1000 inch) hole, 20 to 30 feet away depending on background noise.
• Easily detects any gas that generates ultrasonic sound during flow including vacuum leaks.
• Capable of detecting leaks equivalent to 1.5 oz/year of Refrigerant.
• Works equally well for compressed Air or Nitrogen.
• Not affected by wind or high concentrations of leaked gas or refrigerant.

Kits for Every Application

Whether you only need the basic functions of the VPE-GN or you plan to take full advantage of the instrument's diverse capabilities, we have a kit that will meet your needs! Click the "Find Your Kit" tab above to learn more.

Advantages Versus Sniffers

• AccuTrak® VPE is a much more accurate and reliable instrument for detecting single and multiple leaks.
• AccuTrak® VPE can detect any type of refrigerant gas including nitrogen.
• AccuTrak® VPE detects both vacuum and pressure leaks.
• AccuTrak® VPE is effective in gas saturated areas and under windy conditions.
• AccuTrak® VPE does not require the introduction of tracer gases into the system, which can be ozone depleting when vented, and can also be harmful to ones health.
• AccuTrak® VPE is battery powered for cordless operation

Advantages versus other Ultrasonic Leak Detectors

• AccuTrak® VPE is #1 in technology. We wrote the book on ultrasonic leak detection, our patented instruments lead the industry!
• AccuTrak® VPE is the original! it is not a copy.
• AccuTrak® VPE is the most durable unit available, with the best warranty. The face of the unit is sealed with no pin holes/speakers for foreign objects to enter.
• AccuTrak® VPE has more dynamic range, and wont overload in loud areas.
• AccuTrak® VPE gives true audio sound reproduction instead of the "beeps and squeals" of other instruments.

0563 5505 550-1 Refrigeration System Analyzer (RSA) Basic Kit by Testo

testo 550: just switch on, measure, and read off Large figures allow the values to be read off the display quickly and easily. Two temperature-compensated pressure sensors measure high and low pressure quickly and precisely, and automatically calculate the temperatures. A glance at the instrument display is enough, and you see the measurement result. Two temperature inputs guarantee you the simultaneous calculation and display of superheating and subcooling. The temperature can additionally also be displayed. By simply pressing a button, you can switch between the measurement tasks at your will.

Kits includes:

• 550 Refrigeration System Analyzer
• 0613 5505 - Clamp probe (NTC)

• The digital manifold testo 550, ideal for all measurement work on refirgeration systems and heat pumps
• Robustness and extremely convenient operation
• Measurement of low and high pressure as well as calculation of temperatures
• Simultaneous calculation Of superheating and subcooling in real time
• 39 refrigerants already stored in instrument

30-0954RK-205 Aspirator Panel for One IR M2 Transmitter, with Flow Switch by RKI Instruments

Single or dual sensor system is designed to monitor gas atmospheres from extreme conditions with either temperature, moisture, or pressure challenges. A powerful air aspirator can pull a sample from up to 100 feet away. The filtered and conditioned sample gas is then passed across one or two different detectors. Each detector shares a common calibration and compressed air inlet for aspirated flow. This system is fault tolerant removing the need for expensive downtime and maintenance. The sample is diluted with air after the gas sensor and then returned to a common exhaust reducing the danger of potential hazardous gases entering a safe work space.

System integrity is maintained at all times using a flow fail monitoring device which provides a NO contact that activates if the sample line becomes blocked or damaged or if the air supply is removed or interrupted.

The panel can be used with direct-connect (sensors connected to an RKI controller), or with S2 Series, and M2 Series transmitters. All transmitters have a 4-20 mA signal for direct connection to the site DCS, PLC or site control system. If needed, RKI instruments can supply a dedicated Gas Detection Control system to provide local alarms, 4-20 mA output with a wide range of dry contacts, making the system very sophisticated and user friendly.

Integral sample filter included to remove water and dirt, automatic drain type.

RS485 Modbus output options available on the M2 transmitter.

Features:

• Simple to operate
• Long life air aspirator (no moving parts)
• Extreme sample temperatures
• One or two sensors
• Inside/outside location options
• Corrosion resistant construction for extreme environments/samples
• Uses proven RKI technology
• Modular design easy to maintain
• Self draining moisture trap
• Back flush for sample line
• NEMA 4X enclosure options (stainless steel or plastic)

Applications:

• Flammable, oxygen, or toxic monitoring
• Wastewater
• Drinking water plants
• Gas turbine monitoring flammable and CO
• Tunnel monitoring
• Landfill borehole analyses
• Printing press exhaust solvent recovery
• Winery CO2/O2
• Biogas Methane
• Hydrogen Sulfide "H2S" scrubber break through
• Any sample draw gas monitoring application

*Please note we can only ship RKI products to customers within the United States

VPE Plus Kit by Superior AccuTrak

The Patented Superior AccuTrak® VPE represents state-of-the-art technology for pinpointing leaks is air conditioning and refrigeration systems. AccuTrak® is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using a technology called "heterodyning" it translates the sound to a lower frequency which your ear can interpret. AccuTrak maintains the original sound characteristics making it possible to distinguish leaks from other competing background sounds. AccuTrak is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy.

The AccuTrak® VPE Plus Kit is designed for technicians looking to take full advantage of all the VPE s many capabilities. The VPE Plus Kit includes everything in our Standard Kit PLUS our powerful Burst Tone Sound Generator! The sophisticated Burst Tone can artificially pressurize any vessel or space with ultrasonic sound, allowing a technician to quickly scan for leaks even where there is no actual pressure differential! The VPE Plus Kit is ideal for technicians who test refrigerator door and window seals, or any other non-pressurized seal or vessel. The VPE Plus Kit is also great for Energy Audits and Surveys, and finding air leaks and sources of air infiltration in homes, aircraft, ships, and buildings.

Kit Includes

• VPE Leak Detector
• Headset
• Battery
• Hard Case
• Touch Probe
• Waveguide
• Sound Generator

Applications:

• Leak Detection: Air, Vacuum, Refrigerants; ANY GAS!
• Steam Traps: Detect live steam loss in seconds!
• Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!
• Bearing Wear: Hear wear and lubrication problems before damage is done!

Features:

• Audio Output: 0 Hz to 4 kHz Natural Sound conversion allows you to Hear the Leak, and distinguish leaks from mechanical or other background ultrasound.
• Visual Output: 10 element bar graph provides quick and intuitive visual indication to presence of and relative strength of ultrasound.
• Adjustable Sensitivity: allows operator to quickly identify leaks from a distance, and then zero in on the exact location of the leak.

Capabilities:

• Capable of detecting a 5 psi leak out of a 0.005" (5/1000 inch) hole, 20 to 30 feet away depending on background noise.
• Easily detects any gas that generates ultrasonic sound during flow including vacuum leaks.
• Capable of detecting leaks equivalent to 1.5 oz/year of Refrigerant.
• Works equally well for compressed Air or Nitrogen.
• Not affected by wind or high concentrations of leaked gas or refrigerant.

Kits for Every Application

Whether you only need the basic functions of the VPE or you plan to take full advantage of the instrument's diverse capabilities, we have a kit that will meet your needs! Click the "Find Your Kit" tab above to learn more.

Advantages Versus Sniffers

• AccuTrak® VPE is a much more accurate and reliable instrument for detecting single and multiple leaks.
• AccuTrak® VPE can detect any type of refrigerant gas including nitrogen.
• AccuTrak® VPE detects both vacuum and pressure leaks.
• AccuTrak® VPE is effective in gas saturated areas and under windy conditions.
• AccuTrak® VPE does not require the introduction of tracer gases into the system, which can be ozone depleting when vented, and can also be harmful to ones health.
• AccuTrak® VPE is battery powered for cordless operation

Advantages versus other Ultrasonic Leak Detectors

• AccuTrak® VPE is #1 in technology. We wrote the book on ultrasonic leak detection, our patented instruments lead the industry!
• AccuTrak® VPE is the original! it is not a copy.
• AccuTrak® VPE is the most durable unit available, with the best warranty. The face of the unit is sealed with no pin holes/speakers for foreign objects to enter.
• AccuTrak® VPE has more dynamic range, and wont overload in loud areas.
• AccuTrak® VPE gives true audio sound reproduction instead of the "beeps and squeals" of other instruments.

42501R Gasurveyor 11 - 500R 2 Button Portable Gas Detector - LEL, VOL, O2 (CGI / CSM) - Rechargeable by GMI

The GMI Gasurveyor 500 series is GMI's most technologically advanced range of gas detectors to date. GMI has developed this new range of standard instruments to cover the majority of your gas detection requirements.

Features

• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use, 2-button operation
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Audible/visual alarms for all gas ranges
• Fault alarms for low flow, low battery, etc.
• Compatible with the GMI range of Auto Calibration Systems

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

72-2120-204 Digester Gas Monitor, 25% Volume O2/1,000 ppm H2S by RKI Instruments

RKI is proud to introduce our Digester Gas Monitor. Gas from waste digesters contains high levels of methane, CO2, and H2S, with little to no oxygen present. The RKI gas monitor checks for all these gases on a cyclic basis. A powerful air aspirator draws a sample from up to 100 feet away. Since digester gas contains high humidity and high H2S, both of which can cause damage to sampling systems, the RKI Digester Gas Monitor is designed to handle these with no damage to the sampling system or sensors. The sample is passed through a series of dirt, dust, and moisture stopping filters, and these filters are automatically purged with fresh air at the end of each cycle.

Measurement time is just 4 minutes, taken at periodic cycles. Cycle time is selectable, with settings for cycle time of 15 minute, 1 hour, 4 hours, 8 hours, or 24 hours. A cycle can also be initiated anytime by pressing a button. After each cycle, the sensors and sampling system are flushed with fresh air so as to minimize corrosion caused by the high H2S content. The system is fault tolerant minimizing the possibility of expensive repairs or downtime.

System integrity is maintained at all times using a flow fail monitoring device which provides a fail alarm and relay if there is ever a problem with the flow system, such as a blockage, or if the air aspirator compressed air supply is removed or interrupted.

The system is housed in a wall mounting NEMA 4X enclosure. The gas readings can be viewed through the enclosure door clear window. Flow meters and filters are easily visible for confirmation of correct flows and operation. The RKI Digester Gas Monitor contains adjustable alarm levels for each gas, and also programmable alarm relays. In addition, the unit provides 4-20mA signals for each gas concentration for connection to an external DCS, PLC, or other site control system. A Modbus output is also available. The outputs are the readings received from the last cycle taken.

Features:

• Corrosion resistant design; Housing designed for extreme environments; Internal construction for extreme samples; Flow system designed to handle corrosive wet samples
• Sample system designed to handle high humidity
• Accurately measures gases with high levels of H2S present
• 100 ft. sample range
• Up to 4 sensors: Methane 0-100% Volume; CO2 0-50% Volume; Oxygen 0-25% Volume; H2S 0-1000 PPM (0-3000 or 0-5000 optional)
• Self draining moisture trap
• Automatic backflush of sampling system
• Long life air aspirator (no moving parts)
• Suitable for inside/outside installations
• NEMA 4X enclosure
• Uses proven RKI technology
• Modular design easy to maintain
• Simple to operate

Industry Applications:

• Wastewater Treatment Digesters
• Biogas Methane
• Animal Farms

*Please note we can only ship RKI products to customers within the United States

MA1138 86ASU (Fire) Sampling Unit - for Series 60 Fire Detectors by Crowcon

The Air Sampling Unit (ASU) is designed to be used with Crowcon s Xgard range of detectors for monitoring potentially hazardous gases within ventilation ducts.

Features:

• Enables air ducts to be monitored without requiring the detector to be mounted within the duct.
• Avoid sensor drift due to air-flow effects.
• Simple, easy to install design.
• Simple detector maintenance: there is no need to access the duct for calibration purposes.
• Extremely reliable; ASU has no moving parts.

SCT-108.002.50 SCT SKYE Magnetic Field Meter by ScichemTech

Includes:

• 9V Battery
• Instruction Manual

Features:

• A complete portable SCT meter for magnetic field measurements.
• An electromagnetic wave simply means the wave motion of the electromagnetic field (EMF)
• This meter is applied to measuring electromagnetic fields of extremely low frequency (ELF) of 30hz to 300hz.
• It is capable of measuring the electromagnetic field radiation intensity that is produced from electric transmission equipment, power line, electric oven, air conditioner, refrigerator, computer monitor, video/audio device and so forth.
• The magnetic field unit is tesla (t), gauss(g), micro-tesla (ut) or milli-gauss(mg).
• Data hold, maximum hold, overload indication.
• Battery operated with low battery indication.

44523R Gasurveyor 523R 4 Button Portable Gas Detector - LEL, VOL, H2S - Rechargeable by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

0560 8353 835-H1 Moisture Module IR Thermometer, 4-point laser sighting, data logging, external probe input & humidity module by Testo

Take advantage of the benefits the testo 835 series has to offer, in virtually all sectors of trade and industry: e.g. monitoring wall temperature and humidity, inspecting air conditioning and ventilation systems, the maintenance of industrial systems or the quality control of industrially manufactured products.

Testo infrared measuring technology, which delivers firstclass results even at long distance, is particularly helpful when monitoring the temperature of objects that are small, moving, difficult to access or extremely hot. The many features increase the room for manoeuvre, for example in the building trade when carrying out surface moisture measurement via infrared, or in the metal, glass and ceramics industry when measuring temperatures up to 1500 °C. So you can be certain of having everything under control and of safeguarding your standards of quality at all times.

• Measure safely and accurately even at high temperatures
• 4-point laser shows the exact measuring range, preventing incorrect measurements
• Safe measurements from a long distance, thanks to 50:1 optics
• Integrated emissivity measurement for absolute measuring reliability
• Patented surface moisture measurement (testo 835-H1)
• Convenient menu guidance with icons and joystick
• Measuring value and location memory, and data analysis on the PC with free PC software "EasyClimate"

Lumidor MiniMAX XT Personal Detector

MiniMAX XT is technically crafted to be, quite simply, the easiest and most cost effective to use single gas on the market. Utilizing patented sensing technologies, the MiniMAX XT provides 24/7 user confidence. That means solid, reliable, continuous protection always.

Lumidor identified that the market demanded more than tiny good looks in a single gas detector. Our customers said that in addition to a small and rugged design, single gas monitors must offer comprehensive sensor options, simple operation and most importantly, reliable and accurate readings without false alarms triggered by common radio interference.

Simple one button operation reduces time consuming and costly training issues. Our unique Temperature Compensation and Cell Output Decay Compensation features ensure improved accuracy across wide temperature ranges, providing our 2 year, no calibration needed facility.

Cost Effective

• No calibration required
• Unit may be calibrated if site procedures necessitate
• Remaining lifetime display enables planned replacement
• 24 month continuous operation
• Low cost investment

Easy to use

• Out-of-the-box solution
• Provided with an interactive Product Guide
• One button operation

Excellent EMC / RFI performance

• No false alarms due to common radio interference or cell phones
• Complies with toughest industrial standards for RFI immunity and EMC compatibility

Reliable operation

• Uses patented SureCell (CO and H2S only) and Reflex* technology
• Stable and accurate gas readings
• Intrinsically safe

Compact Design

• Small ergonomic design
• Lightweight
• Comfortable to wear

Durable housing

• Rugged and impact resistant
• Weather resistant

Versatile clip design

• Clips anywhere
• Optional crocodile clip design

Large Display

• Battery life status
• Actual gas reading during alarm
• Peak reading and when it occured
• Remaining lifetime
• Alarm status
• Test status

Demanding Alarms

• Distinctive two-tone alarm
• Rapid flashing alarm alerts user of danger
• Vibrating alarm
• Low battery alarm - indicates unit nearing end of life

30-0954RK-229 Aspirator Panel for One Oxygen or Toxic and One IR Direct Connect or S2 Transmitters, with Flow Switch by RKI Instruments

Single or dual sensor system is designed to monitor gas atmospheres from extreme conditions with either temperature, moisture, or pressure challenges. A powerful air aspirator can pull a sample from up to 100 feet away. The filtered and conditioned sample gas is then passed across one or two different detectors. Each detector shares a common calibration and compressed air inlet for aspirated flow. This system is fault tolerant removing the need for expensive downtime and maintenance. The sample is diluted with air after the gas sensor and then returned to a common exhaust reducing the danger of potential hazardous gases entering a safe work space.

System integrity is maintained at all times using a flow fail monitoring device which provides a NO contact that activates if the sample line becomes blocked or damaged or if the air supply is removed or interrupted.

The panel can be used with direct-connect (sensors connected to an RKI controller), or with S2 Series, and M2 Series transmitters. All transmitters have a 4-20 mA signal for direct connection to the site DCS, PLC or site control system. If needed, RKI instruments can supply a dedicated Gas Detection Control system to provide local alarms, 4-20 mA output with a wide range of dry contacts, making the system very sophisticated and user friendly.

Integral sample filter included to remove water and dirt, automatic drain type.

RS485 Modbus output options available on the M2 transmitter.

Features:

• Simple to operate
• Long life air aspirator (no moving parts)
• Extreme sample temperatures
• One or two sensors
• Inside/outside location options
• Corrosion resistant construction for extreme environments/samples
• Uses proven RKI technology
• Modular design easy to maintain
• Self draining moisture trap
• Back flush for sample line
• NEMA 4X enclosure options (stainless steel or plastic)

Applications:

• Flammable, oxygen, or toxic monitoring
• Wastewater
• Drinking water plants
• Gas turbine monitoring flammable and CO
• Tunnel monitoring
• Landfill borehole analyses
• Printing press exhaust solvent recovery
• Winery CO2/O2
• Biogas Methane
• Hydrogen Sulfide "H2S" scrubber break through
• Any sample draw gas monitoring application

*Please note we can only ship RKI products to customers within the United States

VPE-GN (Gooseneck) Ultrasonic Leak Detector by Superior AccuTrak

The Patented Superior AccuTrak® VPE-GN Gooseneck represents state-of-the-art technology for pinpointing leaks in air conditioning and refrigeration systems. The new 9½ flexible Gooseneck provides better detection in hard-to-reach places, and is great for automotive applications too. AccuTrak® is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using the latest "heterodyning" technology it translates the sound to a lower frequency which your ear can interpret. The VPE-GN maintains the original sound characteristics making it possible to distinguish leaks from other competing background sounds. AccuTrak® is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy. Like all Superior AccuTrak® instruments, the VPE-GN easily detects leaks of ANY gas or refrigerant, compressed air, and even vacuum leaks.

VPE-GN - Standard Kit

Superior AccuTrak® advanced patented technology has never been so versatile! The AccuTrak® VPE-GN Standard Kit offers all the functionality and features of the VPE Basic Kit but with the sensor on the end of a 9-1/2 long flexible GooseNeck to get into all those hard-to-reach places. The VPE-GN Standard Kit is great for technicians in the Automotive industry, or any others who need to find tough leaks or other airborne ultrasound in tight spaces, behind obstructions, or inside an assembly. As with all AccuTrak® instruments, the VPE-GN finds leaks for any kind of gas or refrigerant without changing tips or components. Works equally well to find compressed air leaks, nitrogen leaks even vacuum leaks! AccuTrak® can find leaks as small as the equivalent of 1.5 oz per year of refrigerant, or can hear a 5 psi leak up to 30 feet away.

Kit Includes:

• VPE-GN Leak Detector
• Headset
• Battery
• Hard Case
• Waveguide

VPE-GN - Professional Kit

The AccuTrak® VPE-GN Professional Kit is designed for technicians who work in noisy places, or who regularly need to find smaller leaks. With the sensor at the end of the 9-1/2 long flexible GooseNeck you get full sensitivity all the way into those hard-to-reach places. The VPE-GN Professional Kit includes all the great features of our VPE-GN Standard Kit upgraded with professional Noise Cancelling Headphones and a larger case to keep everything together. These high quality headphones eliminate all background noise, allowing a technician to effectively find the smallest leaks even in very loud environments. You can choose the standard style professional headphones, or the hardhat compatible version same price!

Kit Includes:

• VPE-GN Leak Detector
• Battery
• Waveguide
• Noise Blocking Headphones
• Large Carry Case

VPE-GN - Plus Kit

The AccuTrak® VPE-GN Plus Kit is designed for technicians looking to take full advantage of all the VPE-GN s many capabilities. The VPE-GN Plus Kit includes everything in our Standard Kit PLUS our powerful Burst Tone Sound Generator! The sophisticated Burst Tone can artificially pressurize any vessel or space with ultrasonic sound, allowing a technician to quickly scan for leaks even where there is no actual pressure differential! The VPE-GN Plus Kit is ideal for technicians who test refrigerator door and window seals, or any other non-pressurized seal or vessel. The VPE-GN Plus Kit is also great for Energy Audits and Surveys, and finding air leaks and sources of air infiltration in homes, aircraft, ships, and buildings.

Kit Includes:

• VPE-GN Leak Detector
• Headset
• Battery
• Hard Case
• Waveguide
• Sound Generator

VPE-GN - Pro-Plus Kit

The AccuTrak® VPE-GN Pro-Plus Kit is our most comprehensive VPE-GN Kit, for the serious technician who needs the maximum capability from an ultrasonic instrument with a GooseNeck. The VPE-GN Pro-Plus Kit includes the upgraded professional Noise Cancelling Headphones PLUS the powerful Burst Tone Sound Generator, in the larger case to keep everything together. The VPE-GN Pro-Plus Kit offers unrivaled functionality and versatility for a fraction of the cost of any competitive system with similar performance. Find any kind of leak, in any environment, find bad gaskets and door seals and do it all well, in hard-to-reach places you can t even see! If you do a variety of work, and need a cost effective professional kit that can do it all, the Superior AccuTrak® VPE-GN Pro-Plus Kit is for you.

Kit Includes:

• VPE-GN Leak Detector
• Battery
• Waveguide
• Sound Generator
• Noise Blocking Headphones
• Large Carry Case

Applications:

• Leak Detection: Air, Vacuum, Refrigerants; ANY GAS!
• Steam Traps: Detect live steam loss in seconds!
• Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!
• Bearing Wear: Hear wear and lubrication problems before damage is done!

Features:

• Gooseneck Configuration: allows operator to get accurate readings in hard to reach places.
• Audio Output: 0 Hz to 4 kHz Natural Sound conversion allows you to Hear the Leak, and distinguish leaks from mechanical or other background ultrasound.
• Visual Output: 10 element bar graph provides quick and intuitive visual indication to presence of and relative strength of ultrasound.
• Adjustable Sensitivity: allows operator to quickly identify leaks from a distance, and then zero in on the exact location of the leak.

Capabilities:

• Capable of detecting a 5 psi leak out of a 0.005" (5/1000 inch) hole, 20 to 30 feet away depending on background noise.
• Easily detects any gas that generates ultrasonic sound during flow including vacuum leaks.
• Capable of detecting leaks equivalent to 1.5 oz/year of Refrigerant.
• Works equally well for compressed Air or Nitrogen.
• Not affected by wind or high concentrations of leaked gas or refrigerant.

Kits for Every Application

Whether you only need the basic functions of the VPE-GN or you plan to take full advantage of the instrument's diverse capabilities, we have a kit that will meet your needs! Click the "Find Your Kit" tab above to learn more.

Advantages Versus Sniffers

• AccuTrak® VPE is a much more accurate and reliable instrument for detecting single and multiple leaks.
• AccuTrak® VPE can detect any type of refrigerant gas including nitrogen.
• AccuTrak® VPE detects both vacuum and pressure leaks.
• AccuTrak® VPE is effective in gas saturated areas and under windy conditions.
• AccuTrak® VPE does not require the introduction of tracer gases into the system, which can be ozone depleting when vented, and can also be harmful to ones health.
• AccuTrak® VPE is battery powered for cordless operation

Advantages versus other Ultrasonic Leak Detectors

• AccuTrak® VPE is #1 in technology. We wrote the book on ultrasonic leak detection, our patented instruments lead the industry!
• AccuTrak® VPE is the original! it is not a copy.
• AccuTrak® VPE is the most durable unit available, with the best warranty. The face of the unit is sealed with no pin holes/speakers for foreign objects to enter.
• AccuTrak® VPE has more dynamic range, and wont overload in loud areas.
• AccuTrak® VPE gives true audio sound reproduction instead of the "beeps and squeals" of other instruments.

72-2120-205 Digester Gas Monitor, 25% Volume O2/50% Volume CO2 by RKI Instruments

RKI is proud to introduce our Digester Gas Monitor. Gas from waste digesters contains high levels of methane, CO2, and H2S, with little to no oxygen present. The RKI gas monitor checks for all these gases on a cyclic basis. A powerful air aspirator draws a sample from up to 100 feet away. Since digester gas contains high humidity and high H2S, both of which can cause damage to sampling systems, the RKI Digester Gas Monitor is designed to handle these with no damage to the sampling system or sensors. The sample is passed through a series of dirt, dust, and moisture stopping filters, and these filters are automatically purged with fresh air at the end of each cycle.

Measurement time is just 4 minutes, taken at periodic cycles. Cycle time is selectable, with settings for cycle time of 15 minute, 1 hour, 4 hours, 8 hours, or 24 hours. A cycle can also be initiated anytime by pressing a button. After each cycle, the sensors and sampling system are flushed with fresh air so as to minimize corrosion caused by the high H2S content. The system is fault tolerant minimizing the possibility of expensive repairs or downtime.

System integrity is maintained at all times using a flow fail monitoring device which provides a fail alarm and relay if there is ever a problem with the flow system, such as a blockage, or if the air aspirator compressed air supply is removed or interrupted.

The system is housed in a wall mounting NEMA 4X enclosure. The gas readings can be viewed through the enclosure door clear window. Flow meters and filters are easily visible for confirmation of correct flows and operation. The RKI Digester Gas Monitor contains adjustable alarm levels for each gas, and also programmable alarm relays. In addition, the unit provides 4-20mA signals for each gas concentration for connection to an external DCS, PLC, or other site control system. A Modbus output is also available. The outputs are the readings received from the last cycle taken.

Features:

• Corrosion resistant design; Housing designed for extreme environments; Internal construction for extreme samples; Flow system designed to handle corrosive wet samples
• Sample system designed to handle high humidity
• Accurately measures gases with high levels of H2S present
• 100 ft. sample range
• Up to 4 sensors: Methane 0-100% Volume; CO2 0-50% Volume; Oxygen 0-25% Volume; H2S 0-1000 PPM (0-3000 or 0-5000 optional)
• Self draining moisture trap
• Automatic backflush of sampling system
• Long life air aspirator (no moving parts)
• Suitable for inside/outside installations
• NEMA 4X enclosure
• Uses proven RKI technology
• Modular design easy to maintain
• Simple to operate

Industry Applications:

• Wastewater Treatment Digesters
• Biogas Methane
• Animal Farms

*Please note we can only ship RKI products to customers within the United States

0563 0890 73 890-2 Deluxe Thermal Imager Kit by Testo

You can carry out completely damage-free tests on materials and components with the thermal imager set testo 890-2 Set. Thanks to the 640 x 480-pixel detector, in combination with the high-quality Germanium optics, the set testo 890-2 Set achieves the highest level of image quality. This allows weak spots and problems to be reliably detected in industrial and building thermography.

In combination with the Testo SuperResolution technology, the set testo 890-2 Set records extremely high-resolution images in megapixel quality (1280x960 pixels). This means that even the smallest or very distant measurement objects can be thermographed with an extremely high level of precision.

• Detector size 640 x 480 pixels: With 307,200 temperature measurement points, the measurement objects are detected in outstanding image quality, extremely clearly and precisely.
• SuperResolution technology to 1280 x 960 pixels SuperResolution technology improves the image quality by one class, i.e. the resolution of the thermal images is four times higher.
• Flexibility thanks to rotatable handle and fold-out, rotatable display
• Thermal sensitivity < 40 mK Thanks to an excellent temperature resolution of < 40 mK, even the smallest temperature differences are visible.
• Large field of view thanks to 42° lens With the standard wide-angle lens, large image sections are immediately recognized, and the temperature distribution of the measurement object recorded at a glance.
• Panorama image assistant For large measurement objects, the panorama image assistant allows the analysis and documentation of a total image stitched together from many individual images. There is no need to administer, view and compare several images.
• Site Recognition Technology For repetitive thermography of similar measurement objects, the SiteRecognition technology offers the direct recognition, allocation and archiving of the measurement sites, as well as the automatic allocation and archiving of the the thermal images.
• High temperature up to 1200°C With the high temperature option, the measuring range can be flexibly extended up to 1200 °C.
• Fully radiometric video measurement incl. logger function (via USB) With the optional fully radiometric video measurement thermal processes can be thermally analyzed in real time (also periodically and event based). For every instant, all temperature measurement points are exactly available per pixel.
• Exchangeable lenses
• Special measurement mode for detecting areas with danger of mould
• Lens protection glass
• Auto focus
• Built-in digital camera with power LEDs
• Minimum focus distance 10 cm
• Voice recording using headset

The thermal imager set testo 890-2 is delivered in a robust case incl.

• Pro software
• SD card
• USB cable
• Carrying strap
• Lens cleaning cloth
• Mains unit
• Li-ion rechargeable battery
• Exchangeable lenses
• Lens protection glass
• Additional battery
• Fast battery charger
• Headset

30-0954RK-224 Aspirator Panel for Two Oxygen or Toxic Direct Connect or S2 Transmitters, with Flow Switch by RKI Instruments

Single or dual sensor system is designed to monitor gas atmospheres from extreme conditions with either temperature, moisture, or pressure challenges. A powerful air aspirator can pull a sample from up to 100 feet away. The filtered and conditioned sample gas is then passed across one or two different detectors. Each detector shares a common calibration and compressed air inlet for aspirated flow. This system is fault tolerant removing the need for expensive downtime and maintenance. The sample is diluted with air after the gas sensor and then returned to a common exhaust reducing the danger of potential hazardous gases entering a safe work space.

System integrity is maintained at all times using a flow fail monitoring device which provides a NO contact that activates if the sample line becomes blocked or damaged or if the air supply is removed or interrupted.

The panel can be used with direct-connect (sensors connected to an RKI controller), or with S2 Series, and M2 Series transmitters. All transmitters have a 4-20 mA signal for direct connection to the site DCS, PLC or site control system. If needed, RKI instruments can supply a dedicated Gas Detection Control system to provide local alarms, 4-20 mA output with a wide range of dry contacts, making the system very sophisticated and user friendly.

Integral sample filter included to remove water and dirt, automatic drain type.

RS485 Modbus output options available on the M2 transmitter.

Features:

• Simple to operate
• Long life air aspirator (no moving parts)
• Extreme sample temperatures
• One or two sensors
• Inside/outside location options
• Corrosion resistant construction for extreme environments/samples
• Uses proven RKI technology
• Modular design easy to maintain
• Self draining moisture trap
• Back flush for sample line
• NEMA 4X enclosure options (stainless steel or plastic)

Applications:

• Flammable, oxygen, or toxic monitoring
• Wastewater
• Drinking water plants
• Gas turbine monitoring flammable and CO
• Tunnel monitoring
• Landfill borehole analyses
• Printing press exhaust solvent recovery
• Winery CO2/O2
• Biogas Methane
• Hydrogen Sulfide "H2S" scrubber break through
• Any sample draw gas monitoring application

*Please note we can only ship RKI products to customers within the United States

72-2120-101 Digester Gas Monitor, 100% Volume CH4 by RKI Instruments

RKI is proud to introduce our Digester Gas Monitor. Gas from waste digesters contains high levels of methane, CO2, and H2S, with little to no oxygen present. The RKI gas monitor checks for all these gases on a cyclic basis. A powerful air aspirator draws a sample from up to 100 feet away. Since digester gas contains high humidity and high H2S, both of which can cause damage to sampling systems, the RKI Digester Gas Monitor is designed to handle these with no damage to the sampling system or sensors. The sample is passed through a series of dirt, dust, and moisture stopping filters, and these filters are automatically purged with fresh air at the end of each cycle.

Measurement time is just 4 minutes, taken at periodic cycles. Cycle time is selectable, with settings for cycle time of 15 minute, 1 hour, 4 hours, 8 hours, or 24 hours. A cycle can also be initiated anytime by pressing a button. After each cycle, the sensors and sampling system are flushed with fresh air so as to minimize corrosion caused by the high H2S content. The system is fault tolerant minimizing the possibility of expensive repairs or downtime.

System integrity is maintained at all times using a flow fail monitoring device which provides a fail alarm and relay if there is ever a problem with the flow system, such as a blockage, or if the air aspirator compressed air supply is removed or interrupted.

The system is housed in a wall mounting NEMA 4X enclosure. The gas readings can be viewed through the enclosure door clear window. Flow meters and filters are easily visible for confirmation of correct flows and operation. The RKI Digester Gas Monitor contains adjustable alarm levels for each gas, and also programmable alarm relays. In addition, the unit provides 4-20mA signals for each gas concentration for connection to an external DCS, PLC, or other site control system. A Modbus output is also available. The outputs are the readings received from the last cycle taken.

Features:

• Corrosion resistant design; Housing designed for extreme environments; Internal construction for extreme samples; Flow system designed to handle corrosive wet samples
• Sample system designed to handle high humidity
• Accurately measures gases with high levels of H2S present
• 100 ft. sample range
• Up to 4 sensors: Methane 0-100% Volume; CO2 0-50% Volume; Oxygen 0-25% Volume; H2S 0-1000 PPM (0-3000 or 0-5000 optional)
• Self draining moisture trap
• Automatic backflush of sampling system
• Long life air aspirator (no moving parts)
• Suitable for inside/outside installations
• NEMA 4X enclosure
• Uses proven RKI technology
• Modular design easy to maintain
• Simple to operate

Industry Applications:

• Wastewater Treatment Digesters
• Biogas Methane
• Animal Farms

*Please note we can only ship RKI products to customers within the United States

0563 0885 71 885-1 Thermal Imager Kit by Testo

You can carry out completely damage-free tests on materials and components with the thermal imager testo 885-1. Thanks to the 320 x 240-pixel detector, in combination with the high-quality Germanium optics, the testo 885-1 achieves an excellent image quality. This allows weak spots and problems to be reliably detected in industrial and building thermography. In combination with the Testo Super Resolution technology, the testo 885-1 records high-resolution thermal images in excellent quality (640 x 480 pixels). This means that even the smallest or very distant measurement objects can be thermographed very precisely.

• Detector size 320 x 240 pixels: With 76.800 temperature measurement points, the measurement objects are detected in outstanding image quality, extremely clearly and precisely.
• Super Resolution technology to 640 x 480 pixels Super Resolution technology improves the image quality by one class, i.e. the resolution of the thermal images is four times higher.
• Flexibility thanks to rotatable handle and fold-out, rotatable display
• Thermal sensitivity < 30 mK, Thanks to an excellent temperature resolution of < 30 mK, even the smallest temperature differences are visible.
• Large field of view thanks to 30° lens With the standard wide-angle lens, large image sections are immediately recognized, and the temperature distribution of the measurement object recorded at a glance.
• Panorama image assistant For large measurement objects, the panorama image assistant allows the analysis and documentation of a total image stitched together from many individual images. There is no need to administer, view and compare several images.
• Site Recognition Technology For repetitive thermography of similar measurement objects, the Site Recognition technology offers the direct recognition, allocation and archiving of the measurement sites, as well as the automatic allocation and archiving of the the thermal images.
• High temperature up to 1200°C With the high temperature option, the measuring range can be flexibly extended up to 1200 °C.
• Special measurement mode for detecting areas with danger of mould
• Lens protection glass
• Auto focus
• Built-in digital camera with power LEDs
• Minimum focus distance 10 cm
• Voice recording using headset

The thermal imager testo 885-1 is delivered in a robust case incl.

• Pro software
• SD card
• USB cable
• Carrying strap
• Lens cleaning cloth
• Mains unit
• Li-ion rechargeable battery

30-0954RK-227 Aspirator Panel for One LEL and One Oxygen or Toxic Direct Connect or S2 Transmitter, with Flow Switch by RKI Instruments

Single or dual sensor system is designed to monitor gas atmospheres from extreme conditions with either temperature, moisture, or pressure challenges. A powerful air aspirator can pull a sample from up to 100 feet away. The filtered and conditioned sample gas is then passed across one or two different detectors. Each detector shares a common calibration and compressed air inlet for aspirated flow. This system is fault tolerant removing the need for expensive downtime and maintenance. The sample is diluted with air after the gas sensor and then returned to a common exhaust reducing the danger of potential hazardous gases entering a safe work space.

System integrity is maintained at all times using a flow fail monitoring device which provides a NO contact that activates if the sample line becomes blocked or damaged or if the air supply is removed or interrupted.

The panel can be used with direct-connect (sensors connected to an RKI controller), or with S2 Series, and M2 Series transmitters. All transmitters have a 4-20 mA signal for direct connection to the site DCS, PLC or site control system. If needed, RKI instruments can supply a dedicated Gas Detection Control system to provide local alarms, 4-20 mA output with a wide range of dry contacts, making the system very sophisticated and user friendly.

Integral sample filter included to remove water and dirt, automatic drain type.

RS485 Modbus output options available on the M2 transmitter.

Features:

• Simple to operate
• Long life air aspirator (no moving parts)
• Extreme sample temperatures
• One or two sensors
• Inside/outside location options
• Corrosion resistant construction for extreme environments/samples
• Uses proven RKI technology
• Modular design easy to maintain
• Self draining moisture trap
• Back flush for sample line
• NEMA 4X enclosure options (stainless steel or plastic)

Applications:

• Flammable, oxygen, or toxic monitoring
• Wastewater
• Drinking water plants
• Gas turbine monitoring flammable and CO
• Tunnel monitoring
• Landfill borehole analyses
• Printing press exhaust solvent recovery
• Winery CO2/O2
• Biogas Methane
• Hydrogen Sulfide "H2S" scrubber break through
• Any sample draw gas monitoring application

*Please note we can only ship RKI products to customers within the United States

2200-009W GMA 200-MW16 Controller, Configured for 9 Measuring Points, Supply Voltage 24 V/DC, without Power Supply by GfG

The GMA 200-MW is our most flexible and advanced gas detection system controller. The design of the GMA 200-MW ensures simple and clearly structured operation in industrial and commercial applications. The system can be configured for control of any combination of GfG gas transmitters for the measurement of an extremely wide range of toxic and combustible gases and vapors.

Flexible modular design

Each GMA 200-MW module can control up to 16 individual gas transmitters (sensors). The self-contained, IP-65 wall-mounted housing facilitates cost-effective and space-saving installation. GMA 200-MW systems are scalable, and easy to expand by adding additional controller and relay modules. Optional gateway modules allow control via remote or touch-screen computer interface.

Easy to configure

Easy-to-use, menu driven GMA 200-MW software allows configuration of sensor type, gas type, measuring point designations, units of measurement, calibration curves, and function of the comprehensive and fully programmable relays. Up to three individual or specified alarm thresholds can be programmed for each measuring point. The GMA 200-MW continuously evaluates the analog input signals of the connected detectors.

Integrated relays

GMA 200-MW systems include comprehensive and fully programmable relays. Each controller is equipped with 8 internal relays. Menu-driven software allows easy assignment of measuring points to relays, single or multiple alarms per point, alarm thresholds, configuration of collective or group alarms, zoning, fault messages and voting functions.

Relay modules

GMA 200-RW relay modules are housed in easy to install IP-65 wall mounted enclosures. Each relay module provides an additional 16 freely configurable relays. A total of four additional relay modules (for 64 additional relays) can be managed by the same GMA 200-MW system. Digital connection with the GMA 200-MW controller allows remote positioning of the relay module wherever it makes the most sense, substantially reducing cabling and installation costs.

Remote terminal displays

Relay modules are available with or without an integral display for readings and system information, making it easy to add a remote terminal wherever needed.

Optional Fieldbus-Gateways

Optional gateway modules allow integration of the GMA 200-MW system into existing company networks based on TCP/IP, Process Field Bus or Process Field Network protocols. Monitoring and system performance data are easily exported for viewing or analysis. A wifi interface can be added to the gateway to allow wireless connection with a touch screen Windows® computer or smart-phone to display or access system information.

GMA 200 power options

GMA 200-MW power options include traditional voltage inputs (2 x 24 V DC, 20-30 V), as well as operation via a redundant, uninterruptible power supply (UPS), ensuring continued operation of the gas warning system even during a power outage.

Integral alarms

The GMA 200-MW includes built-in bright LED strobe light and loud audible alarms.

LED indicator lights

The status of the GMA 200-MW system (including operation, fault, service, alarm and relay status) is shown via LEDs. Individual LED indicators identify the type and severity of the alarm condition, (FLT, AL1, AL2, AL3), and any relays activated by the condition, (R1 through R8).

Datalogging standard

Measured values, mean values, alarm events and faults are permanently stored on a microSD memory card.

Graphical display

Currently measured values are displayed on a backlit, graphical LCD. In the event of an alarm the display changes color from green to red, and highlights the affected channels.

Five buttons enable operation at the GMA 200-MW controller. The main functions of the keyboard are the acknowledgement of alarms and the menu-driven operation. Information on the status of the controller, detector and the relays can be retrieved in the operating menu.

Operation via keypad

Operation of the GMA 200-MW is through easy-to-use menus, and a simple 5 button interface for alarm acknowledgement, and viewing information on the status of the gas warning system, detectors and relays. The intuitive push-button controls make it easy to navigate through additional screens of information. The integrated display enables the reading of alarm levels through the controller LCD for easy hazard assessment.

Configuration

A built-in USB port in the GMA 200-MW is used for connection to the configuration software. GMA 200-MW systems connected through a Fieldbus gateway can be remotely connected with a GfG factory service center for configuration, diagnostic or service evaluation.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Additional modules available in IP-65 wall-mounting housings

• External relay module: GMA 200-RW
• Independent power supply: GMA 200-UPS
• Continuous, motorized pump sampling unit: GMA 200-ASV
• Fieldbus gateway: GMA 200-GW

Features

• Advanced and flexible controller for combustible, O₂ and toxic gas
• IP-65 wall-mounting housing, with integral audible and LED alarms
• Flexible, reliable and economic
• Up to 16 transmitters per GMA 200-MW controller in any combination
• Freely programmable relays
• Clearly structured, easy-to-use push-button interface
• Backlit graphic LCD changes color to indicate alarm
• Connect to other measurement devices with 4-20 mA output