Docking Station

1450-402R-3X 3 Unit DS402 Docking Station System by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

Features

• Single gas inlet
• Double cradle
• Base plate
• Unit-to-unit power adapters
• Ethernet cables
• Standard accessories
• One demand flow regulator (DFR)

1450-404-2X 2 unit DS404 Docking Station System by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

Features

• Single gas inlet
• Double cradle
• Base plate
• Unit-to-unit power adapters
• Ethernet cables
• Standard accessories
• One demand flow regulator (DFR)

A gas detector with unequalled performance and custom options

Do you need a more efficient way to manage your gas detector fleet? Now you can use the IntelliDox smart docking system with your Fleet Manager II program. This automates the process to make you more productive and efficient.

Easy management combined with greater productivity

Installing IntelliDoX is fast and easy. It only takes a few minutes to set up the 5-unit docking system. It's simple to multi-task because every module can operate independently with its own screen, pump, and operating system. It's possible to calibrate 4 units while bump testing another one, so you increase efficiency and save time.

Configuration flexibility for changing needs

With the new IntellDox smart docking system, you control many of the settings. This includes alarm for high and low parameters. Your detector equipment will always meet your specifications.

Simplify data management and networking

Data transfer is quick and simple. Store and transfer gas detection info like bump tests via Ethernet cable or USB.

• Take customizing to an entirely new level
• Modules can be expanded to five units
• Setup is uncomplicated and fast
• Many options, including worker compliance tracking

Compatible units

Outstanding Bump Test Performance

Bump testing has never been easier or more efficient. With the help of FastBump, you can quickly bump test your detectors while saving on bump test gas. It revolutionizes the bump testing process.

Features:

• Now you can calibrate, bump test, configure, and track data with compatible gas detectors. Users can update these settings: Display Gas Concentration Readings with Alarm; Change Alarm Settings; Time Display Preferences; Transfer Event Logs Data; Non-compliance Indicator Enabling; Hibernate unit; Schedule Reminders for Bump Tests and Calibration; Firmware update
• Modules have their own keypads and LCD screens - gangable up to 5 units
• Ethernet port for easy network connection
• Change module settings or transfer data via USB port - no network connection needed.
• Best in the industry FastBump Test - eliminates wasteful purge cycles and bottlenecks
• Easy setup - you don't need any tools
• No need for manual bump testing or calibration

Specs for IntelliDoX

Size (w x h x d): 5.4 x 14.2 x 4.3 in. (13.8 x 36.2 x 10.9 cm) (individual docking module)
Weight: 4.2 lb (1.91 kg)
Power supply: 12 V / 8.33A ITE
Real-time clock: Time and date stamp
Communications method: 2-way (infrared) communications between docking module and detector

External interface

• One USB port
• One Ethernet port

Menu navigation

• Display settings
• Time and date
• Gas inlets
• Review IntelliDoX module
• Password protect (when enabled)
• UI display language: English, French, German, Portuguese and Spanish options

Automatic testing

• FastBump - ten seconds
• Standard bump - forty seconds

Internal Data Storage: 2 GB

Pump

• Independent pump (each IntelliDoX module)
• Flow Rate: 350 ml/min

Instrument Management System: Fleet Manager II, v 4.0 or higher

Ratings

• Device complies with FCC Part 15 and ICES-003
• Canadian EMI requirements. Operation is subject to the following two conditions: (1) Device may not cause harmful interference, (2)  Must accept any interference received (includes interference which may cause undesired operation).

Warranty: Full two-year warranty

Accessories and Options

Portable Kit – IntelliDoX fully portable station with Pelican case. Kit contains: 2 docking modules, AC power supply, ethernet cable, tubing, demand flow regulator, and more.

Multi-Inlet Key

Configure one IntelliDoX module to connect multiple calibration gas

Complete list of kits and accessories is available.

DUE TO ONGOING RESEARCH & PRODUCT IMPROVEMENT, SPECS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Part Number: DX-CLIP

DOCK2-2-1P-03-G MicroDock II Automatic Test and Calibration Station with 1 fresh air and 1 gas inlet(s), 1 GasAlertMicroClip XT module(s) with charging, without charging power supply, heavy duty case kit (holds 1 base station, 1-3 docking module and 1-3 58 L gas cylinder (not included)) and DFR by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221P03G

1450-401-3X 3 Unit DS401 Docking Station System by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

Includes

• Single gas inlet
• Single cradle
• Base plate
• Unit-to-unit power adapters
• Ethernet cables
• Standard accessories

1450-401R DS400 Docking Station Includes Demand Flow Regulator by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

1450-401 DS400 Docking Station by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

1450-401R-3X 3 Unit DS401 Docking Station System by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

Features

• Single gas inlet
• Single cradle
• Base plate
• Unit-to-unit power adapters
• Ethernet cables
• Standard accessories
• One demand flow regulator (DFR)

DOCK2-2-1C1N-00-G MicroDock II Automatic Test and Calibration Station with GasAlertQuattro Module (Charging) with Power Supply and 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221C1N00G

1450-404 DS404 Four Inlet Multi-gas Docking Station by GfG

Easy operation

The operation of the DS404 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS404 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS404 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS404 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS404 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS404 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS404 is the right choice.

The DS404 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS404 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS404 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS404 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

quickly print official calibration or bump test certificates. Simply download the records from the DS404 and start the "Certificate Generator" it takes only seconds!

Features

• Four test gas ports
• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Cascade multiple docking stations
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

1450-402 DS400 Docking Station - Instrument & Pump by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

1450-404-DS404-3X 3 Unit DS404 Docking Station System by GfG

Easy operation

The operation of the DS404 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS404 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS404 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS404 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS404 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS404 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS404 is the right choice.

The DS404 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS404 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS404 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS404 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

quickly print official calibration or bump test certificates. Simply download the records from the DS404 and start the "Certificate Generator" it takes only seconds!

Features

• Four test gas ports
• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Cascade multiple docking stations
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

Includes

• Four Gas Inlets
• Single Cradle
• Base Plate
• Unit-to-unit Power Adapters
• Ethernet Cables
• Standard Accessories

1450-402-3X 3 Unit DS402 Docking Station System by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

Features

• Single gas inlet
• Double cradle
• Base plate
• Unit-to-unit power adapters
• Ethernet cables
• Standard accessories

1450-405-3X 3 Unit DS405 Docking Station System by GfG

Easy operation

The operation of the DS404 docking station couldn t be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS404 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS404 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS404 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS404 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS404 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS404 is the right choice.

The DS404 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS404 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS404 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS404 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

quickly print official calibration or bump test certificates. Simply download the records from the DS404 and start the "Certificate Generator" it takes only seconds!

Features

• Four test gas ports
• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Cascade multiple docking stations
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

Features

• Four gas inlet
• Double cradle
• Base plate
• Unit-to-unit power adapters
• Ethernet cables
• Standard accessories

1450-404-3X 3 Unit DS404 Docking Station System by GfG

Easy operation

The operation of the DS404 docking station couldn t be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS404 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS404 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS404 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS404 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS404 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS404 is the right choice.

The DS404 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS404 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS404 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS404 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

quickly print official calibration or bump test certificates. Simply download the records from the DS404 and start the "Certificate Generator" it takes only seconds!

Features

• Four test gas ports
• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Cascade multiple docking stations
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

Features

• Four gas inlet
• Single cradle
• Base plate
• Unit-to-unit power adapters
• Ethernet cables
• Standard accessories

1450-405-DS404-3X 3 Unit DS405 Docking Station System by GfG

Easy operation

The operation of the DS404 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS404 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS404 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS404 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS404 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS404 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS404 is the right choice.

The DS404 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS404 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS404 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS404 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

quickly print official calibration or bump test certificates. Simply download the records from the DS404 and start the "Certificate Generator" it takes only seconds!

Features

• Four test gas ports
• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Cascade multiple docking stations
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

Includes

• Four Gas Inlets
• Double Cradle
• Base Plate
• Unit-to-unit Power Adapters
• Ethernet Cables
• Standard Accessories

CL-TEST Clip SGD Docking Station by Crowcon

Bump testing portable monitors is becoming more and more prevalent in the market. Ensuring sensors are responding to a known concentration of gas remains the best way to verify the monitor is working as intended and has not become impeded.

The Clip SGD docking station provides bump testing, event management and calibration from a simple-to-use multi-unit station and gives fleet or safety managers the ability to update configurations on large fleets. It also maintains the all-important event logs that demonstrate users are working within company requirements.

• Gas usage controlled - lowers the cost of bump testing
• Manages calibration - manages calibration and stores records of the event
• Flexible - can monitor a wide array of test parameters and detector settings, providing excellent traceability
• All data is stored in a USB stick - simple to transfer the data
• Rechargeable battery or power - ideal for in-vehicle or multi-site use
• Holds up to 4 Clips at once - faster testing of larger fleets

1450-405-2X 2 unit DS405 Docking Station System by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

Features

• Single gas inlet
• Double cradle
• Base plate
• Unit-to-unit power adapters
• Ethernet cables
• Standard accessories
• One demand flow regulator (DFR)

DX-BWC4 IntelliDoX Docking Station for BW Clip4 by BW Technologies

IntelliDoX is a high tech way to combine your Fleet Manager II software with docking modules. It's as easy as connecting the gas monitor to the docking module. The IntelliDoX does all the testing for you and transfers the data from the unit to the IntelliDoX . With this form of automatic management, you increase productivity, efficiency, and reliability. In addition, the entire unit only weighs a little over four pounds.

Do your workers have to wait in line for bump tests at the start of each shift? This is no longer needed when you have the IntelliDoX system in place. It takes under 30 seconds to bump test 5 units at one time.

Do you have a great deal of monitors to keep up with? You can gang together as many as five IntelliDoX to manage a large fleet of gas detectors at the same time. Five units can bump test as many as 50 detectors in less than three minutes. And each module can work on its own.

The IntelliDoX can work by itself or can be networked with an Ethernet connection. Keeping track of records has never been easier. For example, you will enjoy quick and easy access to peak exposures, bump test results, and other important detection data.

Fast bump only takes 10 seconds. Standard bump is 40 seconds, and it can be placed in hibernation mode. The IntelliDoX comes with a complete 2 year warranty.

Features

• Peak reading display
• Time of peak reading
• High alarm set point
• Low alarm set point
• Alarm with gas readings
• Clock
• Bump test reminder
• Noncompliance indication
• Engage hibernation mode

Your IntelliDoX Comes with:

• Wall mount also works as a stand and is retractable
• Ethernet port
• USB port
• Guide for quick reference
• Manual with CD
• IntelliDoX module nest for portable gas detector has been installed at the factory.
• Software CD Fleet Manager II

You will need to purchase an enabler kit for every five units banked together. The kit comes with power supply and hoses.

Part Number: DX-BWC4

*Please note we can only ship RKI products to customers within the United States

DX-MAXXT IntelliDoX Docking Station for BW MaxXT II by BW Technologies

IntelliDoX is a high tech way to combine your Fleet Manager II software with docking modules. It's as easy as connecting the gas monitor to the docking module. The IntelliDoX does all the testing for you and transfers the data from the unit to the IntelliDoX . With this form of automatic management, you increase productivity, efficiency, and reliability. In addition, the entire unit only weighs a little over four pounds.

Do your workers have to wait in line for bump tests at the start of each shift? This is no longer needed when you have the IntelliDoX system in place. It takes under 30 seconds to bump test 5 units at one time.

Do you have a great deal of monitors to keep up with? You can gang together as many as five IntelliDoX to manage a large fleet of gas detectors at the same time. Five units can bump test as many as 50 detectors in less than three minutes. And each module can work on its own.

The IntelliDoX can work by itself or can be networked with an Ethernet connection. Keeping track of records has never been easier. For example, you will enjoy quick and easy access to peak exposures, bump test results, and other important detection data.

Fast bump only takes 10 seconds. Standard bump is 40 seconds, and it can be placed in hibernation mode. The IntelliDoX comes with a complete 2 year warranty.

Features

• Peak reading display
• Time of peak reading
• High alarm set point
• Low alarm set point
• Alarm with gas readings
• Clock
• Bump test reminder
• Noncompliance indication
• Engage hibernation mode

Your IntelliDoX Comes with:

• Wall mount - also works as a stand and is retractable
• Ethernet port
• USB port
• Guide for quick reference
• Manual with CD
• ntelliDoX module - nest for portable gas detector has been installed at the factory.
• Software CD - Fleet Manager II

You will need to purchase an enabler kit for every five units banked together. The kit comes with power supply and hoses.

Part Number: DX-MAXXT