Calibration Station

8005942 Protege MasterDock II Auto Bump & Calibration Station with SG Cradle by 3M

The Protege MasterDock II (MD II) is an expandable smart docking station that is compatible with the complete line of Protege portable monitors. The device features an intuitive touch screen interface and can accommodate up to six gas bottles simultaneously.

Up to 6 of the docking stations can be networked to bump, calibrate or charge 6 identical monitors or any combination of the Protege family of monitors simultaneously. The MD II includes line power or an optional rechargeable battery pack for remote locations. The docking station can be connected to a PC by either USB or Ethernet cable for remote access to data. Data is also easily retrievable from the easy-to-read LCD interface on the docking station.

Features

• Highly configurable
• Multiple language options
• Bump and calibration programming
• Data storage with global access
• USB printer attachment

81-SDM2009-11 SDM-2009 Calibration Station, Flash Drive, USB Cable, Tubing, CD, without AC Adapter by RKI Instruments

RKI's new SDM-2009 calibration station for the GX-2009 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2009 inside the SDM-2009 calibration module, the GX-2009's display will indicate whether it's transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Stand Alone Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charging
• Calibration
• Bump Test
• Save Bump Test and Calibration records
• Bump test and calibration records copy to USB jump drive
• Includes PC software for viewing/ archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Automatic calibration/bump test option
• Configure GX-2009 parameters
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

T01-0100-000 AutoRAE Lite Automated Test and Calibration Station for ToxiRAE 3 by RAE Systems

The AutoRAE Lite high-speed, low-operating-cost bump test and calibration station stores data in a text file that can be opened by any spreadsheet or editor. Providing the lowest cost of ownership, the AutoRAE Lite allows you to bump test 700 monitors on one set of batteries.

In addition, the AutoRAE Lite operates on a low-pressure system with a built-in pump.

AutoRAE Lite includes

• AutoRAE Lite as specified
• USB cable for PC set up
• 12-volt power supply
• Demand-flow regulator (installed)
• SD memory card 512MB
• Quick-start guide
• Inlet filter
• CD includes: Operation manual, Drivers, Utility software

Key Features

• Fully automated bump and calibration
• Bump test in 12 seconds
• Full calibration in 2 minutes
• Gas usage only 70 cm³ per bump test
• Tamper-proof data files
• Configures monitor
• "No gas flow" alarm
• Hidden tubing
• Demand-flow system with included regulator

Applications

• Emergency response
• Environmental
• Fire service
• Industrial safety
• Oil and gas

T01-0001-000 AutoRAE Lite for QRAE II Bump Test and Calibration Station by RAE Systems

The AutoRAE Lite high-speed, low-operating-cost bump test and calibration station stores data in a text file that can be opened by any spreadsheet software or text editor.

In addition, the AutoRAE Lite operates on a low-pressure system with a built-in pump.

AutoRAE Lite includes

• AutoRAE Lite as specified
• USB cable for PC set up
• Universal power supply
• Demand-flow regulator (installed)
• SD memory card 512MB
• Quick-start guide
• Inlet filter
• Diffusion adapter
• CD includes: Operation manual, Drivers, Utility software

Key Features

• Fully automated bump and calibration
• Bump test in 12 seconds
• Full calibration in 2 minutes
• Tamper-proof data files
• Configures monitor
• "No gas flow" alarm
• Demand-flow system with included regulator

Applications

• Emergency response
• Environmental
• Fire service
• Industrial safety
• Oil and gas

MicroDock II Automatic Test and Calibration Station

The MicroDock II Test/Calibration Docking System is a cost-effective way to manage calibration, bump testing and datalogging of Honeywell Analytics X5 and XD portable gas detectors.

The MicroDock II packs advanced technology within a compact design to offer the industry s foremost automatic calibration, testing and data management system for portable gas detection equipment. Compatible with the Honeywell Analytics XD and X5 portable gas detectors, the MicroDock II expands up to 10 docking modules (including up to 6 charging units).

Fully portable, lightweight and self-contained, the MicroDock II requires no computer. Instrument records are stored for easy retrieval in the MicroDock II and each individual gas detector. Each MicroDock II system can be connected to a LAN.

Cost and time requirements for routine maintenance are reduced through the MicroDock II s sophisticated automatic calibration and test procedures.

The MicroDock II System includes Honeywell s Fleet Manager software, which consolidates MicroDock II s information into a central database, taking the work out of data analysis and management. This software tool enables users to:

• Create reports automatically
• Sort, format and export data
• View history
• Archive easily
• Customize with user-definable fields

User-friendly, flexible and expandable, the MicroDock II provides the ultimate solution for managing Honeywell Analytics high-performance XD and X5 portable gas detectors.

• Test, pass and fail led indicators
• Large, alphanumeric status lcd
• Fully automatic Hands Free test and calibration
• Built-in pumped inlets for gas delivery
• Easy expansion for multiple modules

Automatic Operation

• Automatic hands-free calibration and functional bump test
• Automatically checks performance of audible and visual alarms
• Simplified record keeping stores and updates calibration data
• Low Maintenance

Easy to Use

• No computer required
• Entirely self-contained
• Lightweight and mobile

Flexible & Expandable Applications

• Operates via line power or set of four C-cell batteries
• Additional self-contained docking modules added to system via simple, plug-in connections no external pressure transducers or gas lines necessary
• Minimized cost of ownership

Networking Support

• Multiple MicroDock II systems can be connected via a LAN
• Multi-language support in English, French, German, Spanish and Portuguese

T01-0100-000 AutoRAE Lite Automated Test and Calibration Station for ToxiRAE 3 by RAE Systems

The AutoRAE Lite high-speed, low-operating-cost bump test and calibration station stores data in a text file that can be opened by any spreadsheet or editor. Providing the lowest cost of ownership, the AutoRAE Lite allows you to bump test 700 monitors on one set of batteries.

In addition, the AutoRAE Lite operates on a low-pressure system with a built-in pump.

AutoRAE Lite includes

• AutoRAE Lite as specified
• USB cable for PC set up
• 12-volt power supply
• Demand-flow regulator (installed)
• SD memory card 512MB
• Quick-start guide
• Inlet filter
• CD includes: Operation manual, Drivers, Utility software

Key Features

• Fully automated bump and calibration
• Bump test in 12 seconds
• Full calibration in 2 minutes
• Gas usage only 70 cm³ per bump test
• Tamper-proof data files
• Configures monitor
• "No gas flow" alarm
• Hidden tubing
• Demand-flow system with included regulator

Applications

• Emergency response
• Environmental
• Fire service
• Industrial safety
• Oil and gas

*Please note we can only ship RKI products to customers within the United States

M003-0003-000 CaliCase MP300T1 Bump Test and Calibration Station by mPower Electronics

The UNI Docking Box (MP100T) and UNI CaliCase (MP300T1) are docking and calibration stations for the UNI and UNI 321 Single Gas Detectors. The MP100T is a single docking box for one instrument and the MP300T1 handles up to four a UNIs simultaneously. They both provide the three functions of 1) semi-automated calibration or bump testing, 2) data downloading and 3) uploading instrument configuration. In addition, all calibrations and bump tests performed on the docking units are stored in on-board memory as a compliance record. The docking stations are designed to handle the most commonly measured gases such as oxygen (O₂), carbon monoxide (CO), hydrogen sulfide (H₂S), ammonia (NH₃) hydrogen cyanide (HCN) and sulfur dioxide (SO₂). Both docking systems have rechargeable batteries and are portable for remote use.

Features, Functions and Benefits

• Bump testing, calibration, configuration and data recording on a single platform
• Simple, single-button operation
• Fast – up to 4 units bumped or calibrated simultaneously (on MP300T1)
• 1999 or 100,000 calibration or bump record storage
• Portable, using battery power for up to 1000 bump tests
• Robust – All-in-one hard case

81-SM2003U Single Point Calibration Station for GX-2003, Model SM-2003U by RKI Instruments

The SM-2000 single module calibration station for the GX-2009 and GX-2003 portable gas monitors is a stand alone station that can calibrate, bump test, charge, and archive data without the need of a computer to operate. The module has 4 operating modes, which include bump test only, % volume methane bump/calibration (for the GX-2003), calibration only, and bump with automatic calibration (if the bump test fails). The SM-2000 modules are capable of storing up to 200 bump test or calibration records. To download the data each module includes a 1 GB USB flash drive. Also included is a software package to import the data from the USB drive and manage records by serial #, user ID, or station ID. Each module has user adjustable test times and tolerances to meet specific testing requirements. The charger within the module quick charges battery packs within 90 minutes and will recognize alkaline batteries. The Calibration Station power requirements are 115/230 VAC, 50/60Hz.

Features:

• Stand alone system, no PC needed for operation
• Calibrate, bump test, charge, and archive data
• Software manages records by serial #, user ID, or station ID
• Each station is equipped with configuration control and status indicators
• User adjustable test times and tolerances
• Automatic quick charge of instrument in 90 minutes or less
• Exhaust line connection for test gas venting
• Records are stored as a tab delineated text file (.txt format can be imported into a spreadsheet)
• Software is Windows Vista, and XP compatible
• Operates on any Pentium II or higher PC
• USB port for downloading data to a USB flash drive
• USB flash drive included

*Please note we can only ship RKI products to customers within the United States

DOCK2-2-1N-00-N MicroDock II Automatic Test and Calibration Station and Docking Module without Charging Cable by BW Technologies

BW Technologies Base Station and Docking Module without charging cable is a BW Technologies accessory that improves the operation and lifespan of the compatible gas detection device. The docking station safely houses the device during calibration, charging, and testing. It will also indicate the charging status on the device. BW Technologies manufactures a variety of accessories for its product offerings. Consult your devices specifications to see which accessories are offered.

Part Number: DOCK221N00N

81-SDM2009 SDM-2009 Single Point Calibration Station for with AC Adaptor by RKI Instruments

RKI's new SDM-2009 calibration station for the GX-2009 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2009 inside the SDM-2009 calibration module, the GX-2009's display will indicate whether it's transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Stand Alone Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charging
• Calibration
• Bump Test
• Save Bump Test and Calibration records
• Bump test and calibration records copy to USB jump drive
• Includes PC software for viewing/ archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Automatic calibration/bump test option
• Configure GX-2009 parameters
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

DOCK2-2-1C1N-00-N MicroDock II Automatic Test and Calibration Station and Docking Module with Charging Cable by BW Technologies

BW Technologies designs and manufactures a range of accessories and replacement parts for its product lines. These accessories and replacement pieces help to prolong the lifespan and effectiveness of your gas detection devices. The BW Technologies Base Station and Docking Module with charging cable easily fits your gas detection device. Load the device into the docking station and it will begin to charge the unit.

Part Number: DOCK221C1N00N

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States