ScichemTech

SCT-108.002.09 SCT CADY pH/ORP/Conductivity/TDS/Salinity/Resistivity/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic ORP combined electrode
• Plastic conductivity electrode
• pH standard buffer solution
• 1413us/cm conductivity standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for ph, ORP and conductivity measurements.
• Multi-parameter meter, equipped with ph electrode, ORP electrode and conductivity electrode, automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function setup, self-diagnose information, automatic power-off and low voltage display.
• Automatic identification of 12 ph standard buffer solutions, three options of standard buffer solutions: Europe and America series & nist series
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.40 SCT NASH CO₂ Detector - I by ScichemTech

Includes:

• User Manual
• Sleeve
• Carrying case
• 9V battery

Features:

• A complete portable SCT meter for carbon dioxide measurements.
• Large dual LCD display for co₂, % RH humidity and temperature.
• Precise adjustment in different barometric levels (or pressures).
• Co₂: 0 ~ 9,999 PPM range, diffusion sampling mode.
• Continuous data logging with time/date.
• Energy efficiency by sampling time modulation.
• Data hold & maximum/minimum with time stamp.
• USB power supply.
• Data memory and recall function.
• Easy to use USB interface and user friendly software.
• Fast warm up time/audible alarm.

Temperature: -100°C ~ +400°C OR -148°F ~ +752°F

SCT-108.005.01 SCT-pH-MINI pH Mini Controller by ScichemTech

Includes:

• pH probe
• Fixation clamps
• Solution
• Instruction manual

Features:

• SCT pH MINI online pH controller is an accurate instrument used for Industrial online measurement and pH control
• Simple and compact design
• Meets all the international standards
• Easy to Install , Operates safely with less maintanence
• Output Insulated 4- 20 mA
• Large and Clear LCD Display
• In line measurement and control of pH values
• pH electrode Supplied with standard 10 meter cable

Length(MM) & Diameter : 213 X Ø15.00
Temperature: -100°C ~ +400°C OR -148°F ~ +752°F

SCT-108.003.C3 Plastic Conductivity Electrode by ScichemTech

• Plastic conductivity electrode
• K=1.0 cm-1 automatic temperature compensation for laboratory and field testing
• 4-pin plug

SCT-108.003.19 SCT-BEN-HARD-1 Benchtop Water Hardness Meter by ScichemTech

Includes:

• Water hardness electrode stirring type electrode holder
• Water hardness calibration solution (B1,B2 & B23) 20 ml
• Test cup pedestal in a solution for water hardness electrode tools for filling reference solution
• WH - link communication software
• RS-232 communication cable
• Operation manual

Features:

• SCT benchtop meter is for measurement of water hardness (the total concentration of calcium ion and magnesium ion).
• Electrode adopts water hardness combination electrode with patent structure. It consists of measurement electrode, reference electrode and temperature probe. Replaceable measuring head, steady potential, fast response, easy to use.
• Meter adopts intelligent chip design, automatic calibration, automatic temperature compensation, time display, data storage RS232 output, etc.
• Ability to switch among eight units: mmol/l, mg/l (caco3), mg/l (cao), mmol/l (boiler) and mg/l (ca). Three options of three units: °FH France °DH Germany and °EH UK from WH-link communication software
• Equipped with B1 B2 and B3 calibration solutions.
• Equipped with WH-link communication software, connect testing data of meter to computer.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.18 SCT-BEN-FLU-1 Benchtop Fluoride Ion Concentration Meter by ScichemTech

SCT benchtop fluoride ion meter suitable for detecting fluoride ion in the water samples.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Fluoride ion electrode
• Reference electrode
• Temperature electrode
• PF1.00 standard solution
• 9V power adapter
• 6V power adapter
• Battery
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Electrode range.
• Fluoride ion electrode, reference electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.D1 Temperature Electrode by ScichemTech

• Temperature electrode
• Stainless steel housing
• Fast response
• High accuracy
• RCA plugs

SCT-108.002.D2 DO Electrode Accessory by ScichemTech

• DO electrode membrane cap
• Combined membrane cap
• Special for DO electrode
• Specification: 3 units per group

SCT-108.002.03 SCT-AVARI Portable Conductivity/TDS/Salinity/Resistivity Meter by ScichemTech

Includes:

• Portable Conductivity/TDS/Salinity/Resistivity Meter
• Plastic conductivity electrode
• 1413uS/CM conductivity standard solution
• Screw-Driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for coductivity measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, automatic power-off and low voltage display.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Plastic conductivity electrode with automatic temperature compensation, fast response and accurate result.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

Temperature: -100°C ~ +400°C OR -148°F ~ +752°F

SCT-108.003.10 SCT BEN-ISE-2 pH/MV/ISE/Cond/DO Meter by ScichemTech

Sct benchtop pH/MV/ISE/Conductivity/DO meter is the high precision multi parameter measurement instrument.

It has high pure water pH/Conductivity measurement mode.

It has large measurement range and high accuracy conductivity measurement mode can be switch to TDS salinity and resistivity.

DO measurement has ATC, automatic salinity compensation and automatic air pressure compensation.

10 kinds of common ion can be selected in the ion concentration measuring mode. User can self define other ions.

Can switch 4 kinds of concentration unit px, mol / l, mg/l and ppm.

Instrument resolution pH 0.001, conductivity 0.5, ISE 0.01.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• Conductivity electrode
• DO electrode
• Double salt bridge reference electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50 ml)
• 1413us/cm conductivity standard solution
• 9V power adapter
• 6V power adapter
• Membrane cap
• DO electrode inner solution
• Cathode polishing paper stirring bead
• AA battery
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international glp standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Automatically select conductivity measurement range, when measuring high pure water, equipment automatically enters into temperature compensation of nonlinear mode.
• Equips new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each DO electrode equips with three spare diaphragms caps.
• There are 10 kinds of common ions can be selected in the ion concentration measuring mode, user also can self-define other ions.
• Can switch 4 kinds of concentration unit : px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.002.30 SCT LEN LCD Digital Anemometer by ScichemTech

Includes:

• On/off
• H/T
• °F/°C
• 10 memories
• Air velocity unit
• Avg (multi point)
• Air flow volume measurement
• Avg/max/min reading

Features:

• A complete portable SCT meter for air / wind velocity and temperature measurements.
• Instant display of the air velocity and temperature
• Maximum, minimum and average value calculation
• Easy airflow volume calculation (CFM/CMM)
• 10 memories data storage/ recalling/clearing
• Data hold/test function
• One hour auto shut off function
• Battery operated with low battery indication.

SCT-108.001.02 SCT-PH PEN-2 Handheld pH/Temp Meter with ATC by ScichemTech

Includes:

• Handheld pH/Temp Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic & easy pH measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 0.1 pH resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• With Automatic Temperature Compensation (ATC).
• Battery operated.