ScichemTech

SCT-108.003.03 SCT BE-pH-3 Benchtop pH/ORP/Temp Meter by ScichemTech

SCT basic benchtop ph/ORP/temp meter with ATC and with RS232 suitable for general pH measurement in laboratory.

Equipped with plastic 3 in 1 pH combination electrode and stirring type electrode holder easier to use.

Automatic calibration, automatic temperature compensation Instrument with pH resolution 0.01.

Includes:

• Plastic pH combination electrode
• Temperature electrode
• pH 4.00,7.00,10.01 (50 ml) standard solution
• 9V power adapter
• Stirring type electrode holder
• pH link communication software
• RS232 communication cable
• Operation manual.

Features:

• SCT benchtop meter is designed to measure pH/ORP/temperature.
• Large LCD with blue background can display both pH and temperature value at the same time.
• It has intelligent functions for automatic calibration, automatic temperature compensation, data storage/recall, and memory max. and min. value etc.
• 1~3 point automatic calibration, and it can automatically display the percentage of slope after finishing calibration
• Equips tempearature electrode and stirring type electrode holder, which is more suitable for using.
• °C and °F can be switched freely.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.002.54 SCT SOLAR Portable Solar Power Meter by ScichemTech

Includes:

• 9V battery
• Instruction Manual

Features:

• A complete portable SCT meter for solar power measurements.
• End-mount light sensors.
• Select either power or transmission.
• Select either W/M2 or BTU/(FT2XH) units
• Data hold/max/min modes

SCT-108.007.01 SCT-TANK-1 SCT Dosing Tank (LDPE) - 100 Litre by ScichemTech

SCT dosing tanks are with red screw fitting lid with a raised section to mount dosing pumps, mixers, level sensors etc. Made of high quality LDPE (low density polyethylene) cylindrical in shape

SCT-108.005.14 SCT-TDS-MAXI TDS Maxi Controller by ScichemTech

Includes:

• TDS sensor
• Fixation clamps
• Calibration solution
• Instruction manual

Features:

• SCT -TDS (Total Dissolved Solids) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance.
• SCT -TDS (Total Dissolved Solids) MAXI CONTROLLERS are supplied with the suitable electrode with SCT standard 10 meters cable. (New series).
• SCT -TDS (Total Dissolved Solids) MAXI CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT -TDS (Total Dissolved Solids) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT -TDS (Total Dissolved Solids) MAXI CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT -TDS (Total Dissolved Solids) MAXI CONTROLLERS uses Low power consumption and produces less internal heat.
• SCT -TDS (Total Dissolved Solids) MAXI CONTROLLERS has an isolated 4-20 mA currentoutput.
• SCT -TDS (Total Dissolved Solids) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the In line measurement and control of accurate TDS value and it give the direct measurement and readings.

SCT-108.005.01 SCT-pH-MINI pH Mini Controller by ScichemTech

Includes:

• pH probe
• Fixation clamps
• Solution
• Instruction manual

Features:

• SCT pH MINI online pH controller is an accurate instrument used for Industrial online measurement and pH control
• Simple and compact design
• Meets all the international standards
• Easy to Install , Operates safely with less maintanence
• Output Insulated 4- 20 mA
• Large and Clear LCD Display
• In line measurement and control of pH values
• pH electrode Supplied with standard 10 meter cable

SCT-108.002.35 SCT MANS Tachometer (Non-Contact) by ScichemTech

Includes:

• Reflective Tape
• User manual
• Carrying case
• 9V Battery

Features:

• A complete portable SCT meter for rotational speed (rev) measurements.
• Non-contact and contact mode
• Highly reliable and accurate reading
• Non-contact and contact mode
• Laser sighting operating range up to 40 inches/100 cm (laser)
• Auto ranging/fixed decimal
• Tripod mounting bushing
• Contact adaptors
• Battery operated with low battery indication

SCT-108.002.75 SCT ZIARRE Infrared Thermometer (Medium Spot Ratio 30:1, High Temp -32°C to 1300°C) by ScichemTech

Includes:

• 9V DC Battery
• Case
• Manual

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Temperature range : (-32°c to 1300°c)
• Rugged & ergonomic design.
• High DS ratio/spot ratio 30:1
• Adjustable emissivity from 0.1 till 1.0
• Backlight dual display LCD.
• New series for general purposes.
• Ultra low power consumption in shutdown mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• Option to select °C/°F
• Electronic trigger lock.
• Temperature data storage.
• Audible alarms.
• Battery operated.

SCT-108.005.02 SCT-ORP-MINI ORP Mini Controller by ScichemTech

Includes:

• ORP probe
• Fixation clamps
• Solution
• Instruction manual

Features:

• SCT ORP MINI online ORP controller is an Industrial online analysis and monitoring instruments
• Simple and Compact design
• Meets all the International Standards
• Easy to Install, Operates safety with less maintenance.
• ORP Electrode Supplied with standard 10 meter cable, Measurement up to 40 meters.
• Large and clear display for easy reading
• Inlin e measurement and control of ORP values

SCT-108.002.80 SCT MALIN High Performance Infrared Thermometer With K Type Thermocouple and USB Data Output by ScichemTech

Includes:

• K Thermocouple
• 9V DC Battery
• Instruction
• Carrying Case

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Supplied with K type thermocouple to have contact temperature measurement.
• USB data output.
• Temperature range : (-52°C to 1000°C)
• Rugged & ergonomic design.
• High DS ratio/spot ratio 50:1
• Adjustable emissivity from 0.1 till 1.0
• Backlight dual display LCD.
• New series for general purposes.
• Ultra low power consumption in shutdown mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• Option to select °C/°F
• Electronic trigger lock.
• Temperature data storage.
• Audible alarms.
• Battery operated.

SCT-108.001.04 SCT-CON-PEN-2 Handheld Conductivity Meter with High Resolution by ScichemTech

Includes:

• Handheld Conductivity Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic easy Conductivity measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 1 μS/CM resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• With better Conductivity resolution 1 μS/CM.
• With Automatic Temperature Compensation (ATC).
• Battery operated.

SCT-108.001.01 SCT-PH PEN-1 Handheld pH Meter by ScichemTech

Includes:

• Handheld pH Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic & easy pH measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 0.1 pH resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• Battery operated.

SCT-108.003.19 SCT-BEN-HARD-1 Benchtop Water Hardness Meter by ScichemTech

Includes:

• Water hardness electrode stirring type electrode holder
• Water hardness calibration solution (B1,B2 & B23) 20 ml
• Test cup pedestal in a solution for water hardness electrode tools for filling reference solution
• WH - link communication software
• RS-232 communication cable
• Operation manual

Features:

• SCT benchtop meter is for measurement of water hardness (the total concentration of calcium ion and magnesium ion).
• Electrode adopts water hardness combination electrode with patent structure. It consists of measurement electrode, reference electrode and temperature probe. Replaceable measuring head, steady potential, fast response, easy to use.
• Meter adopts intelligent chip design, automatic calibration, automatic temperature compensation, time display, data storage RS232 output, etc.
• Ability to switch among eight units: mmol/l, mg/l (caco3), mg/l (cao), mmol/l (boiler) and mg/l (ca). Three options of three units: °FH France °DH Germany and °EH UK from WH-link communication software
• Equipped with B1 B2 and B3 calibration solutions.
• Equipped with WH-link communication software, connect testing data of meter to computer.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.002.81 SCT ZEN High Performance Infrared Thermometer (50:1) 50 ~ 1500°C by ScichemTech

Includes:

• 9V DC Battery
• Instruction
• Carrying Case

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Temperature range: (-50°C to 1500°C)
• Rugged & ergonomic design.
• High DS ratio/spot ratio 50:1
• Adjustable emissivity from 0.1 till 1.0
• Backlight dual display LCD.
• New series for general purposes.
• Ultra low power consumption in shutdown mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• Option to select °C/°F
• Electronic trigger lock.
• Temperature data storage.
• Audible alarms.
• Battery operated.

Temperature: -100°C ~ +400°C OR -148°F ~ +752°F

SCT-108.002.68 SCT VAND Infrared Thermometer (High Performance 12:1) by ScichemTech

Includes:

• 9V DC Battery
• Instruction Manual
• Carrying Case

Features:

• A complete portable SCT meter for non contact temperature measurements.
• New series includes high performance, general purpose.
• Temperature range -32°C to 535°C.
• Fixed emissivity @ 0.95.
• Ultra low power consumption in shut down mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• High DS ratio.
• Backlight LCD display.
• Option to select °C/°F
• Electronic trigger lock.
• Temperature data storage.
• Audible alarms.
• Battery operated.

SCT-108.002.46 SCT NEO UV-A Meter by ScichemTech

Includes:

• Sensor Probe
• User Manual
• Color Box
• Hard Carrying Case
• 9V Battery

Features:

• A complete portable SCT meter for intensity of ultra violet rays measurement (UV-A, C+AB)
• Backlight LCD and 4 digits dual display
• High and low measurements
• Range in a unit MW/cm2 or UW/cm2
• Socket of tripod mounting
• Automatic measuring
• Magnetic mount
• 20 points memory
• Battery operated with low battery indication.

SCT-108.002.48 SCT RICKY UV-AB Meter by ScichemTech

Includes:

• Sensor Probe
• User Manual
• Color Box
• Hard Carrying Case
• 9V Battery

Features:

• A complete portable SCT meter for intensity of ultra violet rays measurement (UV-A, C+AB)
• Backlight LCD and 4 digits dual display
• High and low measurements
• Range in a unit MW/cm2 or UW/cm2
• Socket of tripod mounting
• Automatic measuring
• Magnetic mount
• 20 points memory
• Battery operated with low battery indication.

SCT-108.004.01 SCT SEDIMENT-1 Portable Manual Silt Density Index Meter by ScichemTech

Includes:

• ASTM instructions for measuring silt density index
• Filter Holder
• Pressure Gauge
• Pressure Regulator
• Ball Valve
• Graduated Cylinder
• Thermometer
• Tubing
• Filter Tweezers

Features:

• SCT SDI METER is completely assembled in a portable COMPACT case ready for on-site testing
• Includes ASTM instructions for measuring silt density index
• Feed pressure required: Min 40 psi
• Assembled with Filter Holder, Pressure Gauge, Pressure Regulator Ball Valve, Graduated Cylinder, Thermometer, Tubing, Filter Tweezers.
• Filters not included