ScichemTech

SCT-108.005.31 SCT-DO-MAXI Dissolved Oxygen Controller by ScichemTech

Includes:

• DO sensor
• Fixation clamps
• Instruction manual

Features:

• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS uses Low power consumption and produce less internal heat.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are has the polagraphic type DO electrode. This oxygen electrode is a diaphragm polarographic (clark) electrode. The conductibility electrolyte makes the polarization between cathode and anode. Between the cathode and the anode, the proper polarization voltage can deoxidize the O2 at the Cathode electrode. Cathode reaction: O2+ 2H2O +4e -- 4OH-, Anode reaction : 4AG +4Cl- -- 4AgCl + 4e. These chemical reactions produce the current which is proportional to the O2 in the test solution.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS has an isolated 4-20 mA current output
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are panel mount type of controllers.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the In line measurement and control of accurate CHLORINE value.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS has a major advantage that, no reagents are used. it has the direct measurement and readings

SCT-108.001.30 SCT-THER-PEN-1 LCD Digital Multi-Thermometer by ScichemTech

Features:

• Reliable SCT Tester for Temperature measurement.
• Small design and display.
• Option to select °F/°C.
• Option to hold / test data.
• Auto shut-off in 60 minutes.
• Sensing time 1 second .
• 133mm. Stainless steel sensor probe protective plastic sleeve with clip.
• Battery operated with low battery indicator.

SCT-108.003.14 SCT BEN-CON-4 Precision Conductivity/DO Benchtop Meter by ScichemTech

SCT precision conductivity DO meter for high precision measurement of the conductivity and dissolved oxygen in laboratory.

Suitable for bio-technology, aqua culture, power plant and environmental protection industries.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Conductivity electrode
• DO electrode
• 1413us/cm conductivity standard solution
• 9V power adapter
• 6V power adapter
• Membrane cap
• DO electrode inner solution
• Cathode polish paper
• B628 stirring bead
• Battery
• RS232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• The new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each DO electrode equips with three spare diaphragms caps.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.09 SCT BEN-pH-8 Benchtop pH/DO Meter by ScichemTech

Sct benchtop pH/DO meter is the high precision pH/do double parameter measurement meter which is suitable for precision measurement.

DO measurement as ATC/automatic salinity compensation and automatic air pressure compensation.

Polaro graphic type oxygen electro, the polarization time is short, fast response and accurate measurement.

Instrument resolution pH 0.001.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• DO electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50ml)
• 9V power adapter
• 6V power adapter membrane cap
• DO electrode inner solution
• Cathode polishing paper
• Stirring bead
• Battery
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series.
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Equips new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each do electrode equips with three spare diaphragms caps.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.15 SCT BEN-DO-1 Benchtop DO/Temperature Meter by ScichemTech

SCT benchtop DO temperature meter with automatic salinity compensation and automatic air pressure compensation.

Equipped with intelligent stirrer, flexible electrode holder and operation instruction.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• DO electrode
• DO electrode inner solution
• Membrane cap (for DO electrode use)
• Cathode polishing paper
• 9V power adapter (for meter use)
• 6V power adapter (for stirrer use)
• RS-232 communication cable
• Communication software CD
• Stirring bead
• AA battery
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure dissolved oxygen and temperature.
• SCT DO measurement has ATC, automatic salinity compensation and automatic air pressure compensation.
• The new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make do measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Electrode adopts combination diaphragm cap, assembling sensitive membrane with diaphragm cap, which very convenient to replace the sensitive membrane. The user only needs to screw the new membrane cap on the electrode.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.13 SCT-BEN-CON-3 Precision Benchtop Conductivity Meter by ScichemTech

Sct precision benchtop conductivity meter for precision conductivity Measurement of research and quality control.

With wide measurement range, high accuracy conductivity measurement Mode can be switch to TDS, salinity and resistivity.

Instrument resolution 1.0

Includes:

• Flexible electrode holder
• Plastic three-in-one combination electrode
• 1413 us/cm conductivity standard solution (50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT bench precision conductivity meter, suitable for high precision conductivity measurement of science research and quality control, with accuracy 0.5%.
• Equips conductivity/ATC glass electrode. Its measurement result is fast and precise. Can choose 25°c, 20°c and 18°c three kinds of basis temperature.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series
• Equipped conductivity/ATC electrode for quick and precise results.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.003.F3 Reference electrode by ScichemTech

• Reference electrode
• The first and second salt bridge solution can be chosen
• For all measurement occasions
• Banana plugs

SCT-108.001.17 SCT-CON-PEN-3 Waterproof Handheld Cond/TDS/Salinity/Temp Meter by ScichemTech

Includes:

• Handheld Cond/TDS/Salinity/Temp Meter
• Standard Solution
• Storage Solution (pH4 & pH7)
• Lanyard Connection
• Battery
• Instruction Manual

Features:

• Reliable SCT Tester for Conductivity, TDS, Salinity and Temperature measurements.
• Microprocessor based for fast and accurate measurements.
• Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
• Large LCD display Conductivity, TDS, Salinity and Temperature Simultaneously.
• Simple to calibrate by one keyboard and automatic temperature compensation (ATC), Manual Salinity (MSC) and Altitude (MAC) Compensation.
• Multi-functions with Data-hold, Max/Min and shows PTS after calibration. Degree °C/°F are switchable.
• Auto power shut off after 10 minutes of non use.
• Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
• Battery operated. Low battery and consumption indicator.

SCT-108.002.11 SCT DEON pH/ORP/Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combination electrode
• Plastic ORP combination electrode
• Plastic conductivity electrode
• DO electrode
z
• pH standard buffer solution
• 1413us/cm conductivity standard solution
• Membrane cap
• DO electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP, conductivity and dissolved oxygen measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Multi-parameter meter, equipped with pH electrode, ORP electrode, conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Automatic identification of 12 pH standard calibration solutions, three options of standard buffer solutions: Europe and America series & nist series
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.07 SCT-BUD Portable pH/ORP/DO Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Do electrode
• pH standard buffer solution
• Membrane cap
• Do electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case.

Features:

• A complete portable SCT-meter for pH, ORP and dissolved oxygen measuements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Double-parameter meter, equipped with ph electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Automatic identification of 12 pH standard buffer solutions, three options of Standard buffer solutions: Europe and America series & nist series.
• Able to set pH measurement modes of high purity water and pure water with Ammonia.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, ce standards and water proof IP57.

SCT-108.002.25 SCT LUCKY Lux Meter by ScichemTech

Includes:

• Battery
• Carrying Case

Features:

• A complete portable SCT meter for intensity of light measurements.
• Good design with high precision.
• Measuring intensities of illumination in lux or foot candles.
• Measuring lights source includes all visible.
• Multi-function for data hold, max. And zero adjustment.
• Cosine angular corrected.
• Battery operated.

SCT-108.003.17 SCT-BEN-CAL-01 Benchtop Calcium Ion Concentration Meter by ScichemTech

SCT benchtop calcium ion meter widely used in detecting the concentration of calcium ions in water.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Calcium ion combination electrode
• Calcium electrode inner solution
• Calcium electrode measuring head
• Tool for filling calcium electrode inner solution
• Temperature electrode
• PCA 1.00 standard solution
• 9v power adapter
• 6v power adapter
• Battery
• RS-232 communication cable
• MP518 communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features upto automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Calcium electrode range.
• Calcium ion combination electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.002.04 SCT-BEA DO Meter by ScichemTech

Includes:

• DO Meter
• DO electrode
• Membrane cap (DO electrode use)
• DO electrode inner solution cathode polishing paper
• Screw-Driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for dissolved oxygen measurements.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, data storage, function set-up, automatic power-off and low voltage display.
• Combined diaphragm cap, replaceable sensitive membrane, screw new diaphragm cap to electrode, easy to use.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.001.15 SCT-DO-PEN-1 Handheld DO/O2/Temp Meter by ScichemTech

Includes:

• Handheld DO/O₂/Temp Meter
• Storage Solution
• LAN Connection
• Battery
• Instruction Manual

Features:

• Reliable SCT tester for Dissolved Oxygen, Oxygen and Temperature measurements.
• Microprocessor based for fast and accurate measurements 0.01 mg/L resolution.
• Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
• Large LCD display DO and Temperature simultaneously.
• Easy to calibrate by one keyboard and Automatic Temperature Compensation (ATC), Manual Salinity (MSC) and Altitude (MAC) Compensation.
• Multi-functions with Data-hold, Max/Min and shows PTS after calibration. Degree °C/°F are switchable.
• Auto power shut off after 10 minutes of non use.
• Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
• Battery operated. Low battery and consumption indicator.

SCT-108.005.26 SCT-CL-MAXI Chlorine Controller by ScichemTech

Includes:

• Chlorine sensor
• Fixation clamps
• Instruction manual

Features:

• SCT-CL (Chlorine) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance
• SCT-CL (Chlorine) MAXI controllers are an industrial instrument used for online analysis and monitoring.
• SCT-CL (Chlorine) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-CL (Chlorine) MAXI CONTROLLERS has Microprocessor based controllers, which gives stable and accurate readings.
• SCT-CL (Chlorine) MAXI CONTROLLERS has Low power consumption and produces less internal heat.
• SCT-CL (Chlorine) MAXI CONTROLLER S has an isolated 4-20 mA current output
• SCT-CL (Chlorine) MAXI CONTROLLERS has a RS 485 communication interface
• SCT-CL (Chlorine) MAXI CONTROLLERS has an automated sensor cleaning control output.
• SCT-CL (Chlorine) MAXI CONTROLLERS has diaphragm polagraphic electrodes. The electrode consists of cathode, anode, electrolyte and a layer of gas permeability diaphragm on the cathode. The measured residual chlorine diffuse to the cathode through diaphragm. The proper polarization voltage between the cathode and the anode, which can deoxidize the residual chlorine on the cathode. These chemical actions proportional to the residual chlorine which is in the measured medium. which gives reliable measurements.
• SCT-CL-(Chlorine) MAXI CONTROLLERS are panel mount type of controllers.
• SCT-CL-(Chlorine) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the In line measurement and control of accurate CHLORINE value.
• SCT-CL-(Chlorine) MAXI CONTROLLERS has a major advantage that, no reagents are used. It has the direct measurement and readings

SCT-108.002.06 SCT-BONO Portable pH/Conductivity/TDS/Salinity/Resistivity Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic conductivity electrode
• pH standard buffer solution
• 1413us/cm conductivity standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT meter for pH, conductivity / TDS / salinity / resistivity Measurements.
• Double-parameter meter, equipped with pH electrode and conductivity electrode, Automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, Automatic temperature compensation, data storage, function set-up, self-diagnose Information, automatic power-off and low voltage display.
• Automatic identification of 12 pH standard buffer solutions, three options of Standard buffer solutions: Europe and America series & NIST series
• Able to set pH measurement modes of high purity water and pure water with Ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two Options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode Of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full Scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.005.13 SCT-EC-MAXI EC (Electrical Conductivity) Maxi Controller by ScichemTech

Includes:

• Conductivity sensor
• Fixation clamps
• Calibration solution
• Instruction manual

Features:

• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are supplied with the suitable electrode with SCT standard 10 meters cable. (New series) 3 ranges of EC can be adjusted in a single controller and the ranges can be switched easily.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS uses Low power consumption and produces less internal heat.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS has an isolated 4-20 mA current output.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the in line measurement and control of accurate EC value and it give the direct measurement and readings.

SCT-108.002.56 SCT-STORM K-Type Thermocouple Thermometer by ScichemTech

Includes:

• Batteries
• Instruction Manual

Features:

• A complete portable SCT meter for temperature measurements.
• One hour auto shut off
• Temperature sensing time 1 second.
• PVC holster with flip-out stand at the back of unit
• Battery operated with low battery indication.