Uv

2704500 UV Lamp Kit 115v AC by AquaPhoenix

Shortwave (254 nm) UV lamps for field or laboratory use. Either lamp can be used in the lab with power supply while Portable Field Pack can only be used with the 1.75" lamp. Portable Field Pack requires a 9-Volt battery (not included) and has a belt clip for easy traveling. Both lamps are physically identical except for bulb and cord length (these are shorter in the 1.75" version). NOTE: Not for use in microbiological applications. UV Lamp contains mercury. Dispose according to state, local or federal regulations.

2113400 UV Spectacles by AquaPhoenix

Protect eyes from extended or high-intensity ultraviolet energy while eliminating "blue haze" interference. Light weight and comfortable, even over prescription glasses.

412 Hydrogen Sulphide Open Path Detector (7-25 m), UV Flash by Crowcon

Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

Features:

• Hydrocarbon and H2S versions available
• Explosion proof to ATEX, UL and GOST-R Standards
• Choice of models for ranges of 0.6m up to 140m
• Aluminium or stainless steel construction
• 4-20mA or RS-485 operation, with alarm and fault relays available

2671000 UV Lamp, Shortwave, 254 nm, 2.125" by AquaPhoenix

Shortwave (254 nm) UV lamps for field or laboratory use. Either lamp can be used in the lab with power supply while Portable Field Pack can only be used with the 1.75" lamp. Portable Field Pack requires a 9-Volt battery (not included) and has a belt clip for easy traveling. Both lamps are physically identical except for bulb and cord length (these are shorter in the 1.75" version). NOTE: Not for use in microbiological applications. UV Lamp contains mercury. Dispose according to state, local or federal regulations.

Contains mercury. Dispose of according to local, state and federal regulations.

FSL100-UV FSL100 UV Flame Detector, Red Housing by Honeywell Analytics

The FSL100 Series of flame detectors from Honeywell delivers robust, fast, and reliable detection of flaming fires in a wide range of applications.

The range consists of UV, UV/IR and IR3 flame detectors. All utilize sophisticated sensing and signal analysis to detect fires quickly while also rejecting false alarms.

The FSL100 may be small and lightweight for easy installation but it is designed to work in tough indoor/outdoor environments, as well as potentially explosive atmospheres.

With a large field of view it can detect a range of different types of fire including hydrocarbon and non-hydrocarbon sources. Available in UV, UV/IR and 3IR we have your application covered.

Suitable for Many Applications

• UV, UV/IR and IR3 available
• Hydrocarbon and non-hydrocarbon sources
• Use in potentially explosive atmospheres
• Indoor and outdoor operation
• High visibility red or discrete white models available

Great Performance

• Approved to EN54-10 and FM3260 flame detector standards
• Comprehensive automatic self test
• Remote manual self test option

Fast & Reliable

• High speed sensors and microprocessor
• Sophisticated analysis algorithms
• Continuous health monitoring
• False alarm rejection

Reduced Life Cost

• Long life elements
• Pressure compensation to avoid contamination
• 2 year warranty
• Buy with confidence

Ease of Installation and Use

• Relay and mA outputs as standard
• Lightweight GRP housing
• Pre-formed knockouts
• Optional swivel mounting bracket
• Long range test lamp available

FSL100-UV

• Suitable for indoor applications; for example fume hoods and hydrogen storage areas
• Effective solution for materials burning with low temperatures, e.g. Sulphur
• Alarms to fires from heavy hydrocarbons (wood, paper, petroleum, etc.), light hydrocarbons (methanol, methane, etc.), and hydrogen
• Good resistance against the influences of: 1) Direct and reflected sunlight, 2) Artificial light, such as fluorescent tubes and glass covered halogen lamps

FSL100-UV/IR

• Analysis of the flame flicker-frequency for improved false alarm rejection
• Dual sensing methodology enables a wide range of hydrocarbon and non-hydrocarbon fires to be effectively detected
• Good resistance against the influences of: 1) Direct and reflected sunlight, 2) Artificial light, such as fluorescent tubes and glass covered halogen lamps, 3) Arcs and electric discharges (staticor from e.g. electric motors), 4) The radiation from electric welding provided that the electric welding takes place at a distance more than 10 feet from the flame detector (a welding rod contains organic compounds which may produce a small flame)

FSL100-IR3

• Analysis of the flame flicker frequency for improved false alarm rejection
• Particularly suited to liquid hydrocarbon and dirty fires
• Affected less by window contamination or smoky fires
• Good resistance against the influences of: 1) Direct and reflected sunlight, 2) Artificial light, such as fluorescent tubes and glass covered halogen lamps, 3) Arcs and electric discharges (static or from e.g. electric motors), 4) The radiation from electric welding provided that the electric welding takes place at a distance more than 10 feet from the flame detector (a welding rod contains organic compounds which may produce a small flame)
• Especially suitable fires that emit large amounts of smoke

1385-1 UV High Temperature Flame Detector (660) - Aluminium by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

2087-1 UV Flame Detector (20/20U) by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

2060-1 UV Flame Detector (660) - Aluminium by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

FSL100-UV-W FSL100 UV Flame Detector, White Housing by Honeywell Analytics

The FSL100 Series of flame detectors from Honeywell delivers robust, fast, and reliable detection of flaming fires in a wide range of applications.

The range consists of UV, UV/IR and IR3 flame detectors. All utilize sophisticated sensing and signal analysis to detect fires quickly while also rejecting false alarms.

The FSL100 may be small and lightweight for easy installation but it is designed to work in tough indoor/outdoor environments, as well as potentially explosive atmospheres.

With a large field of view it can detect a range of different types of fire including hydrocarbon and non-hydrocarbon sources. Available in UV, UV/IR and 3IR we have your application covered.

Suitable for Many Applications

• UV, UV/IR and IR3 available
• Hydrocarbon and non-hydrocarbon sources
• Use in potentially explosive atmospheres
• Indoor and outdoor operation
• High visibility red or discrete white models available

Great Performance

• Approved to EN54-10 and FM3260 flame detector standards
• Comprehensive automatic self test
• Remote manual self test option

Fast & Reliable

• High speed sensors and microprocessor
• Sophisticated analysis algorithms
• Continuous health monitoring
• False alarm rejection

Reduced Life Cost

• Long life elements
• Pressure compensation to avoid contamination
• 2 year warranty
• Buy with confidence

Ease of Installation and Use

• Relay and mA outputs as standard
• Lightweight GRP housing
• Pre-formed knockouts
• Optional swivel mounting bracket
• Long range test lamp available

FSL100-UV

• Suitable for indoor applications; for example fume hoods and hydrogen storage areas
• Effective solution for materials burning with low temperatures, e.g. Sulphur
• Alarms to fires from heavy hydrocarbons (wood, paper, petroleum, etc.), light hydrocarbons (methanol, methane, etc.), and hydrogen
• Good resistance against the influences of: 1) Direct and reflected sunlight, 2) Artificial light, such as fluorescent tubes and glass covered halogen lamps

FSL100-UV/IR

• Analysis of the flame flicker-frequency for improved false alarm rejection
• Dual sensing methodology enables a wide range of hydrocarbon and non-hydrocarbon fires to be effectively detected
• Good resistance against the influences of: 1) Direct and reflected sunlight, 2) Artificial light, such as fluorescent tubes and glass covered halogen lamps, 3) Arcs and electric discharges (staticor from e.g. electric motors), 4) The radiation from electric welding provided that the electric welding takes place at a distance more than 10 feet from the flame detector (a welding rod contains organic compounds which may produce a small flame)

FSL100-IR3

• Analysis of the flame flicker frequency for improved false alarm rejection
• Particularly suited to liquid hydrocarbon and dirty fires
• Affected less by window contamination or smoky fires
• Good resistance against the influences of: 1) Direct and reflected sunlight, 2) Artificial light, such as fluorescent tubes and glass covered halogen lamps, 3) Arcs and electric discharges (static or from e.g. electric motors), 4) The radiation from electric welding provided that the electric welding takes place at a distance more than 10 feet from the flame detector (a welding rod contains organic compounds which may produce a small flame)
• Especially suitable fires that emit large amounts of smoke

MISC-MP3-UV-c4 Model MiScope Megapixel MP3 Handheld Digital Microscope with added UV LEDs by Zarbeco

Depending on the image size and resolution quality you need, the MiScope Megapixel MP3 and MiScope Megapixel MP4K both have a range of optional tools and accessories. Video ToolBox imaging software is included with both, enabling you to view live images on your computer screen and capture still pictures or movies which can be emailed or later displayed on a computer projector.

MiScope Megapixel MP3 Features

• 10-180x magnification
• View live and capture images on the computer screen
• Portable with a laptop computer, touch-screen, tablet or mobile device
• Optional Extended Field (EF) with up to 2 1/2" view @6-123x
• USB 3.0 (backward compatible with USB 2.0 at slower speed)
• Optional IR and/or UV illumination (Multi-spectral imaging)
• Optional filter set or filter wheel for IR Luminescence imaging
• Includes our Video Toolbox PRO PC Software for capturing still and moving images, time lapse, enhanced measurement, labeling, draw-on features and digital zoom
• Includes varying thickness Ushim set for fixed magnifications
• Optional VTB Premier Software Includes: calibrated overlays, side by side comparisons, edge detection, optional CAD overlay

MiScope Megapixel MP4K Features

• Ultra high resolution lens
• Resolution to 1 micron with up to 400x magnification
• Connects to the USB port of your desktop or laptop computer
• Includes our upgraded Video Toolbox Premier PC Software with all PRO features plus side by side comparison, calibrated overlays, low-light frame averaging, enhanced measurement tools, pixel level adjustment, magnifier window, edge detection, and optional CAD file import/export
• Optional IR and/or UV illumination (Multi-spectral imaging)
• Includes varying thickness Ushim set, for fixed magnifications
• Working distance up to 2.5 inches, for up to a 1.5 inch field of view
• Adjust the slider arm on the side of the MiScope MP4K to simultaneously control focus and zoom
• Frame rate up to 60 frames/second at HD resolution using USB3; 30 frames/second at 4k resolution with barely perceptible lag (dependent on PC performance)

Computer Requirements for MiScope Megapixel MP3

Minimum system requirements: Pentium IV 1.5 GHz or faster, Windows 7/8/10, DirectX 8.1 or greater, USB 2.0 Port (USB 3.0 port suggested), 2+ GB of Free Memory, Video card with 256 MB of video RAM, minimum 1280 x 1024 resolution at 16-bit color (contact Zarbeco for recommended system requirements). MiTools Mac® Software optional. Android™ 4.2 or higher; compatible with third-party app.

Computer Requirements for MiScope Megapixel MP4K

Minimum system requirements: Pentium IV (4th generation or higher) 1.5 GHz or faster, Windows 7/8/10, DirectX 8.1 or greater, USB 2.0 Port (USB 3.0 port suggested), 2+ GB of Free Memory, Video card with 256 MB of video RAM, minimum 1280 x 1024 resolution at 16-bit color (contact Zarbeco for recommended system requirements).

SP-0174-UV UV Lamp, Splitter by AquaPhoenix

UV Splitter for using two lamps.

MISC-UV-s2 MiScope Digital Microscope with White and UV Illumination by Zarbeco

The MiScope (pronounced My-Scope) now brings portable UV imaging to a new level. It combines a digital movie camera, precision optics, white and UV LEDs into a microscope that fits in the palm of your hand.

Magnification of 40-140X lets you view a larger area in white or UV light to identify an area of interest, then zoom in to view fluorescent inks, dyes, or tracer fibers. Capture images or movies, easily add labels, make measurements, and even draw right on the live video image.

The 3-position switch lets you choose between visible and UV illumination. Or turn the LEDs off and use an external light source or light table.

Features

• View live and capture images on the computer screen (or use a computer projector for large groups)
• 40 - 140x magnification
• 3 position switch: white LEDs/all off/UV LEDs
• Completely portable with a laptop computer
• Save still images, movies and time lapse
• Labels, markers, time stamps, measurement
• Draw directly on the live image
• Print, e-mail, or import into other programs such as Power Point, Word, and Photoshop
• Includes Video ToolBox PC Software (optional Video Toolbox PRO Software)

Application

• Forensic Sciences
• Manufacturing
• Field Sciences
• Collectibles
• Education

Computer Requirements

• Pentium III 500MHz or greater
• Windows 2000/XP/VISTA/7/8
• MAC OS X 10.6+ (Mac Software Optional)
• DirectX 8.1 or greater
• Internet Explorer 5.0 or greater USB port

UVT-LED-SW Submersible UV Transmittance Monitor by Sensorex

Sensorex's UVT-LED transmittance monitors are the first UVT monitors in the world to use a UV-C LED light source. This technology offers advantages over traditional mercury lamp UVT instrumentation, including stable output with zero warm up time. The result is more accurate UVT measurements over a longer period of time, without the need for frequent recalibration or light source replacement.

Automatic Cleaning and Calibration

Maintenance is minimal thanks to our patented wiper technology, which delivers a swift cleaning cycle and automatic calibration to a quartz reference standard.

Effortless Installation or Retrofitting

We offer several different mounting kits - perfect for new installs in an open channel, retrofits for Hach⪚ models, or various in-line configurations using a sanitary connection.

Simple Connectivity

The sensor directly outputs a 4-20mA signal for tuning the power of a UV disinfection system or monitoring with a data logger.

• Stable measurements driven by UV-C LED technology
• Patented automatic cleaning and calibration
• Simple connectivity with direct 4-20mA output
• Reduced maintenance with no field servicable parts
• Continuous monitoring for UV disinfection control

UVT-LED-H Handheld UV Transmittance Monitor by Sensorex

Sensorex's UVT-LED transmittance monitors are the first UVT monitors in the world to use a UV-LED light source. This technology offers advantages over traditional mercury lamp UVT instrumentation, including stable output with zero warm up time. Field users will benefit from reduced maintenance: LED technology eliminates the need for replacement cuvettes or lamps.

Our UVT-LED-H Handheld UV Transmittance Monitor is ergonomic and lightweight at just 0.9 lbs (0.41 kg). Obtain incredibly accurate UV Transmittance data on water samples with easy one-button operation. Calibration is equally quick and easy, and only requires a small amount of deionized (DI) water. Designed for reliability in the field, the unit is built with a Nickel-Cadmium (NiCad) battery and can take up to 350 readings on a single charge.

Features:

• Ergonomic, lightweight, and portable
• Fast readings with zero warm up time
• Quick and easy calibration with DI water
• No replacement cuvettes or lamps
• Stable measurements driven by UV-C LED technology
• Take up to 350 measurements per battery charge