ScichemTech

SCT-108.002.01 SCT-AIRA Portable pH Meter by ScichemTech

Includes:

• Portable pH Meter
• Plastic pH/ATC Three-in-One combination Electrode
• pH standard buffer solution (pH4.00, pH7.00 and pH10.01/50ML)
• Screw-Driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Automatic identification of 12 pH standard calibration solutions, three options of standard buffer solutions: Europe and American series and NIST series.
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Calibration solution and portable case and suited in field and on site.
• SCT meter meets ISO 9001:2000, CE standards and water proof IP57.

SCT-108.002.02 SCT-ALLY Portable ORP Meter by ScichemTech

Includes:

• Portable ORP Meter
• ORP Electrode
• Plastic ORP combination electrode
• 222MV ORP standard solution
• Screw-Driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP measurements.
• Built-in microprocessor chips, intelligent functions such as data storage, function set-up, automatic power-off and low voltage display.
• Equipped with plastic ORP electrode, fast response and accurate result.
• Equipped with ORP standard solution and portable case.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.08 SCT CADE Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic conductivity electrode
• DO electrode
• 1413us/cm conductivity standard solution
• Membrane cap (DO electrode use)
• DO electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for conductivity and dissolved oxygen measurements.
• Double-parameter meter equipped with conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, automatic power-off and low voltage display.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.003.08 SCT BEN-ISE-1 Benchtop pH/ISE Meter by ScichemTech

SCT benchtop pH/ISE meter is the high precision pH + ISE double parameter measurement meter which is suitable for precision measurement research and quality control.

10 kinds of common ions can be selected in the ion concentration measuring mode user also can self defend other ions.

Can switch 4 kinds of concentration unit px, mol/l, mg/l and ppm.

Instrument resolution pH 0.001, ISE 0.01

Includes:

• Flexible electrode holder
• Intelligent stirrer
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode double salt bridge reference electrode
• pH standard buffer solution 50 ml
• 9V power adapter
• 6V power adapter
• Stirring bead
• Battery
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 13 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• There are 10 kinds of common ions can be selected in the ion concentration measuring mode, user also can self-define other ions.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.15 SCT BEN-DO-1 Benchtop DO/Temperature Meter by ScichemTech

SCT benchtop DO temperature meter with automatic salinity compensation and automatic air pressure compensation.

Equipped with intelligent stirrer, flexible electrode holder and operation instruction.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• DO electrode
• DO electrode inner solution
• Membrane cap (for DO electrode use)
• Cathode polishing paper
• 9V power adapter (for meter use)
• 6V power adapter (for stirrer use)
• RS-232 communication cable
• Communication software CD
• Stirring bead
• AA battery
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure dissolved oxygen and temperature.
• SCT DO measurement has ATC, automatic salinity compensation and automatic air pressure compensation.
• The new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make do measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Electrode adopts combination diaphragm cap, assembling sensitive membrane with diaphragm cap, which very convenient to replace the sensitive membrane. The user only needs to screw the new membrane cap on the electrode.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.07 SCT BEN-pH-7 Precision GLP pH/Conductivity Meter by ScichemTech

SCT benchtop precision GLP pH/Conductivity meter is suitable for precision measurement research and quality control, resolution pH 0.001 and conductivity 0.5.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• Conductivity electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50 ml) 1413us/cm
• Conductivity standard solution 50ml
• 9V power adapter
• RS-232 communication cable
• Communication software disk
• Operation manual and packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Automatically recognize 8 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series
• Adopt advanced and original conductivity measurement technology, use 1pc of conductivity electrode (K=1) it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Automatically select conductivity measurement range, when measuring high pure water, equipment automatically enter into temperature compensation of nonlinear model.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.001.18 SCT-pH-PEN-4 Waterproof Handheld PH/mV/Cond/TDS/Salt/Temp Meter by ScichemTech

Includes:

• Handheld PH/mV/Cond/TDS/Salt/Temp Meter
• Standard Solution (pH4, pH7 & 1413uS)
• Lanyard Connection
• Battery
• Instruction Manual

Features:

• Reliable SCT Multi Tester for pH, ORP, Conductivity, Salinity and Temperature measurements.
• Microprocessor based for fast and accurate measurements.
• Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
• Large LCD display for pH / ORP / Conductivity /TDS / Salinity and Temperature simultaneously.
• Easy to calibrate by one keyboard and Automatic Temperature Compensation (ATC), Manual Salinity(MSC) and Altitude(MAC) Compensation.
• Multi-functions with Data-hold, Max/Min and shows PTS after calibration Degree °C/°F are switchable. World best combination handhled meter.
• Auto power shut off after 10 minutes of non use.
• Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
• Battery operated. Low battery and consumption indicator.

SCT-108.002.05 SCT-BUCK Portable pH/ORP/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic ORP combined electrode
• pH standard buffer solution,220mv ORP
• Standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable sct meter for pH & ORP measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration,automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Double-parameter meter, equipped with three-in-one combination ph electrode and ORP electrode, automatic identification of electrode by meter.
• Automatic identification of 12 ph standard calibration solutions, three options of standard buffer solutions: europe, america series &nist series.
• Able to set pH measurement modes of high purity water and pure water with ammonia
• Sct meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.003.05 SCT BEN-pH-5 Precision pH/ORP/Temp Meter by ScichemTech

SCT precision pH/ORP/Temp meter suitable for precise pH measurements for research and quality control.

(Resolution 0.001 pH)

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• pH standard buffer solution pH 4.00, 7.00, 10.01 (50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series.
• High purified water and ammonia added purified water ph measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.003.18 SCT-BEN-FLU-1 Benchtop Fluoride Ion Concentration Meter by ScichemTech

SCT benchtop fluoride ion meter suitable for detecting fluoride ion in the water samples.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Fluoride ion electrode
• Reference electrode
• Temperature electrode
• PF1.00 standard solution
• 9V power adapter
• 6V power adapter
• Battery
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Electrode range.
• Fluoride ion electrode, reference electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.10 SCT BEN-ISE-2 pH/MV/ISE/Cond/DO Meter by ScichemTech

Sct benchtop pH/MV/ISE/Conductivity/DO meter is the high precision multi parameter measurement instrument.

It has high pure water pH/Conductivity measurement mode.

It has large measurement range and high accuracy conductivity measurement mode can be switch to TDS salinity and resistivity.

DO measurement has ATC, automatic salinity compensation and automatic air pressure compensation.

10 kinds of common ion can be selected in the ion concentration measuring mode. User can self define other ions.

Can switch 4 kinds of concentration unit px, mol / l, mg/l and ppm.

Instrument resolution pH 0.001, conductivity 0.5, ISE 0.01.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• Conductivity electrode
• DO electrode
• Double salt bridge reference electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50 ml)
• 1413us/cm conductivity standard solution
• 9V power adapter
• 6V power adapter
• Membrane cap
• DO electrode inner solution
• Cathode polishing paper stirring bead
• AA battery
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international glp standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Automatically select conductivity measurement range, when measuring high pure water, equipment automatically enters into temperature compensation of nonlinear mode.
• Equips new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each DO electrode equips with three spare diaphragms caps.
• There are 10 kinds of common ions can be selected in the ion concentration measuring mode, user also can self-define other ions.
• Can switch 4 kinds of concentration unit : px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.002.07 SCT-BUD Portable pH/ORP/DO Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Do electrode
• pH standard buffer solution
• Membrane cap
• Do electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case.

Features:

• A complete portable SCT-meter for pH, ORP and dissolved oxygen measuements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Double-parameter meter, equipped with ph electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Automatic identification of 12 pH standard buffer solutions, three options of Standard buffer solutions: Europe and America series & nist series.
• Able to set pH measurement modes of high purity water and pure water with Ammonia.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, ce standards and water proof IP57.

SCT-108.003.12 SCT-BEN-CON-2 GLP Benchtop Conductivity Meter by ScichemTech

SCT GLP conductivity benchtop meter suitable for normal conductivity measurement.

Advanced and original conductivity measurement technology wide measurement range, high accuracy, conductivity measurement mode can be switch to TDS, salinity and resistivity.

Instrument resolution 1.0.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• 1413 us/cm conductivity standard solution
• 9V power adapter
• Rs-232 communication cable
• Communication software cd
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure conductivity and temperature.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Equips conductivity/ATC electrode. Its measurement result is fast and precise.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity,TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.002.06 SCT-BONO Portable pH/Conductivity/TDS/Salinity/Resistivity Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic conductivity electrode
• pH standard buffer solution
• 1413us/cm conductivity standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT meter for pH, conductivity / TDS / salinity / resistivity Measurements.
• Double-parameter meter, equipped with pH electrode and conductivity electrode, Automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, Automatic temperature compensation, data storage, function set-up, self-diagnose Information, automatic power-off and low voltage display.
• Automatic identification of 12 pH standard buffer solutions, three options of Standard buffer solutions: Europe and America series & NIST series
• Able to set pH measurement modes of high purity water and pure water with Ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two Options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode Of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full Scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.003.13 SCT-BEN-CON-3 Precision Benchtop Conductivity Meter by ScichemTech

Sct precision benchtop conductivity meter for precision conductivity Measurement of research and quality control.

With wide measurement range, high accuracy conductivity measurement Mode can be switch to TDS, salinity and resistivity.

Instrument resolution 1.0

Includes:

• Flexible electrode holder
• Plastic three-in-one combination electrode
• 1413 us/cm conductivity standard solution (50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT bench precision conductivity meter, suitable for high precision conductivity measurement of science research and quality control, with accuracy 0.5%.
• Equips conductivity/ATC glass electrode. Its measurement result is fast and precise. Can choose 25°c, 20°c and 18°c three kinds of basis temperature.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series
• Equipped conductivity/ATC electrode for quick and precise results.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.003.09 SCT BEN-pH-8 Benchtop pH/DO Meter by ScichemTech

Sct benchtop pH/DO meter is the high precision pH/do double parameter measurement meter which is suitable for precision measurement.

DO measurement as ATC/automatic salinity compensation and automatic air pressure compensation.

Polaro graphic type oxygen electro, the polarization time is short, fast response and accurate measurement.

Instrument resolution pH 0.001.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• DO electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50ml)
• 9V power adapter
• 6V power adapter membrane cap
• DO electrode inner solution
• Cathode polishing paper
• Stirring bead
• Battery
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series.
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Equips new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each do electrode equips with three spare diaphragms caps.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.14 SCT BEN-CON-4 Precision Conductivity/DO Benchtop Meter by ScichemTech

SCT precision conductivity DO meter for high precision measurement of the conductivity and dissolved oxygen in laboratory.

Suitable for bio-technology, aqua culture, power plant and environmental protection industries.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Conductivity electrode
• DO electrode
• 1413us/cm conductivity standard solution
• 9V power adapter
• 6V power adapter
• Membrane cap
• DO electrode inner solution
• Cathode polish paper
• B628 stirring bead
• Battery
• RS232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• The new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each DO electrode equips with three spare diaphragms caps.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.