ScichemTech

SCT-108.003.06 SCT BEN-pH-6 pH/Conductivity Benchtop Meter by ScichemTech

SCT benchtop pH/Conductivity meter is the most widely used pH and conductivity double parameter measurement meters.

Resolution pH 0.01/Conductivity 0.1.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Plastic conductivity electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50 ml)
• 1413 us/cm conductivity standard solution 50 ml
• 9v power adapter
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure conductivity, pH and ORP.
• The most widely used pH + conductivity double-parameter measurement meter.
• Meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize pH buffer solution. User can choose anyone from three series of standard buffer solutions: Europe & USA series, & NIST series
• Adopt advanced and original conductivity measurement technology, use 1pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Option to switch conductivity, TDS, salinity and resistivity.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

Handle: 150 X Ø18
Probe: 219 X Ø6.4
Probe Head: Ø16
Temperature: -100°C ~ +400°C OR -148°F ~ +752°F

SCT-108.001.16 SCT-PH-PEN-3 Waterproof Handheld pH/mV/Temp Meter by ScichemTech

Includes:

• Handheld pH/mV/Temp Meter
• Standard Solution
• Storage Solution (pH4 & pH7)
• Lanyard Connection
• Battery
• Instruction Manual

Features:

• Reliable SCT Tester for pH, ORP and Temperature measurements.
• Microprocessor based for fast and accurate measurements.
• Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
• Large LCD display pH, ORP and Temperature simultaneously.
• Easy to calibrate by one keyboard and Automatic Temperature Compensation (ATC), Manual Salinity(MSC) and Altitude(MAC) Compensation.
• Multi-functions with Data-hold, Max/Min and shows PTS after calibration. Degree °C/°F are switchable.
• Auto power shut off after 10 minutes of non use.
• Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
• Battery operated. Low battery and consumption indicator.

Length(MM) & Diameter: Ø18.00
Temperature: -100°C ~ +600°C OR -148°F ~ +1112°F

SCT-108.002.79 SCT-MALAR High Performance Infrared Thermometer (Spot Ratio 50:1) by ScichemTech

Includes:

• 9V DC Battery
• Case
• Manual

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Temperature range : (-52°C to 1000°C)
• Rugged & ergonomic design.
• High DS ratio/spot ratio 50:1
• Adjustable emissivity from 0.1 till 1.0
• Backlight dual display LCD.
• New series for general purposes.
• Ultra low power consumption in shutdown mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• Option to select °C/°F
• Electronic trigger lock.
• Temperature data storage.
• Audible alarms.
• Battery operated

SCT-108.002.PB SCT-GDS-2 pH Titration Hotplate Magnetic Stirrer by ScichemTech

SCT magnetic stirrers and magnetic stirrer & hotplates are made exclusively for SCT water testing / measurement. Benchtop series: however, customer can use these products for your general purposes also.

Includes:

• DC6V Power Adapter
• Instruction Manual

Features:

• Small and compact
• Made of abs plastic
• Range 0 - 2300 rpm
• Stepless speed/regulation
• Stirrer with heating upto 120°c
• 1 liter stirring capacity
• 6v DC - power adapter

SCT-108.003.F3 Reference electrode by ScichemTech

• Reference electrode
• The first and second salt bridge solution can be chosen
• For all measurement occasions
• Banana plugs

SCT-108.002.PA SCT GDS-1 pH Titration Magnetic Stirrer by ScichemTech

SCT magnetic stirrers and magnetic stirrer / hotplates are made exclusively for SCT water testing/measurement. Benchtop series: however, customer can use these products for your general purposes also.

Includes:

• DC6V Power Adapter
• Instruction

Features:

• Small and compact
• Made of ABS plastic
• Range 0 - 2300 rpm
• Stepless speed/regulation
• 1 liter stirring capacity
• 6V - DC - power adapter

SCT-108.002.66 SCT KARAN Infrared Thermometer (General Purpose) by ScichemTech

Includes:

• 9V DC Battery
• Case
• Manual

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Temperature range (-20°C till 320 °C)
• Rugged and ergonomic design for general purposes.
• Ultra low power consumption in shutdown mode.
• Extended long time measuring reliability.
• Backlight LCD display / auto shut-off in 6 seconds
• Laser sighting on/off is switchable.
• Option to select °C/°F
• Battery oeprated.

Length(MM) & Diameter : 175 X Ø3.2
Temperature: -100°C ~ +800°C OR -148°F ~ +1472°F

SCT-108.002.10 SCT DAVY pH/ORP/Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic conductivity electrode
• DO electrode
• pH standard buffer solution
• 1413 us/cm conductivity standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP, conductivity/TDS/salinity/resistivity/dissolved oxygen and temp. measurements.
• Multi-parameter meter, equipped with pH electrode, conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Automatic identification of 12 pH standard buffer solutions, three options of standard buffer solutions: Europe and America series & nist series.
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.74 SCT ZEAL Infrared Thermometer (Medium Spot Ratio 30:1) by ScichemTech

Includes:

• 9V DC Battery
• Case
• Manual

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Rugged & ergonomic design.
• High DS ratio/spot ratio 30:1
• Adjustable emissivity from 0.1 till 1.0
• Backlight dual display LCD.
• New series for general purposes.
• Ultra low power consumption in shutdown mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• Option to select °C/°F
• Electronic trigger lock.
• Temperature data storage.
• Audible alarms.
• Battery operated.

SCT-108.003.12 SCT-BEN-CON-2 GLP Benchtop Conductivity Meter by ScichemTech

SCT GLP conductivity benchtop meter suitable for normal conductivity measurement.

Advanced and original conductivity measurement technology wide measurement range, high accuracy, conductivity measurement mode can be switch to TDS, salinity and resistivity.

Instrument resolution 1.0.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• 1413 us/cm conductivity standard solution
• 9V power adapter
• Rs-232 communication cable
• Communication software cd
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure conductivity and temperature.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Equips conductivity/ATC electrode. Its measurement result is fast and precise.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity,TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.07 SCT BEN-pH-7 Precision GLP pH/Conductivity Meter by ScichemTech

SCT benchtop precision GLP pH/Conductivity meter is suitable for precision measurement research and quality control, resolution pH 0.001 and conductivity 0.5.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• Conductivity electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50 ml) 1413us/cm
• Conductivity standard solution 50ml
• 9V power adapter
• RS-232 communication cable
• Communication software disk
• Operation manual and packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Automatically recognize 8 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series
• Adopt advanced and original conductivity measurement technology, use 1pc of conductivity electrode (K=1) it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Automatically select conductivity measurement range, when measuring high pure water, equipment automatically enter into temperature compensation of nonlinear model.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.002.IB Negative Electrode Polishing Paper by ScichemTech

• Polishing paper special for cleaning negative electrode
• 2 pcs/pack