Case

6313 Single Parameter pH or ORP Controller, 2-Relays, IP-65 Case, RS-485 by Jenco

• Clear LCD displays pH or mV, with temperature and relay status simultaneously.
• Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.
• Displays absolute and relative ORP.
• Isolated and reversible 4-20 mA current output for pH or ORP allows it to be used as a proportional output.
• 2 programmable on/off relays: 2 for pH or ORP.
• CE Approved
• Password protection.
• IP65

*Please note we can only ship RKI products to customers within the United States

To house T3 and charger.

X5 5-Gas Detector

Honeywell Analytics X5 Series portable gas detectors simultaneously monitor up to five atmospheric hazards. A wide selection of individual electrochemical toxic sensors is available, along with optional IR sensor for carbon dioxide (% CO2) and PID sensors for detecting volatile organic compounds (VOCs). The X5 has data-logging capabilities and is compatible with MicroDock II, Honeywell s automatic test/calibration docking station.

Compact and lightweight, the X5 activates audible, visual and vibrating alarms in the event of a low, high, TWA or STEL alarm condition. Highly configurable to suit a range of applications, Honeywell Analytics X5 comes as a diffusion or pumped instrument with either alkaline or Lithium Polymer rechargeable hot-swappable battery pack. Standard features include confidence beep, automatic calibration, full function self test, and an extended selection of user-settable field options.

PID Detection

Compact, Rugged & Practical

• Detects VOCs (PID), H2S, CO, O2, SO2, PH3, NH3, NO2, HCN, CI2, CIO2, O3 , CO2 and combustibles
• Small, lightweight design
• Water-resistant, concussion-proof enclosure
• Records TWA, STEL and maximum exposures to gas and displays readings on command

Excellent Performance Features

• 0 - 1000 ppm measurement of VOCs (Volatile Organic Compounds)
• Optional integral pump for remote sampling
• Datalogging and multi-language support in English, French, German, Spanish and Portuguese
• Optional confined space kits
• Compatible with Honeywell Analytics MicroDock II automated test and calibration station

Demanding Alarms

• Audible, vibrating and visual alarms
• Four alarm levels: instantaneous Low and High Alarm for all gases, TWA (time-weighted average) and STEL (short-term exposure limit) for VOCs and toxics

User Friendly Operation

• Continuous LCD shows simultaneous gas concentrations for five gases
• Simple, user selectable field options including PID / combustible correction factor, language selection, confidence beep, span level, set TWA/STEL calculation choice, set calibration due date, pass code protection, latching alarm, SAFE display function, stealth mode, and selectable ppm resolution for some gases
• Self-testing sensor, battery/circuit integrity and audible/visual alarms

*Please note we can only ship RKI products to customers within the United States

E2829 Replacement Battery

If your GasAlertExtreme has a flashing battery icon this means that the battery has been depleted and needs to be replaced. This item number is the battery that is needed. To install the new battery simply remove the 4 screws on the back of the instrument and separate the front case from the back case. Once this is completed you will see the battery, remove it and install the new battery, paying close attention to inserting the battery in the correct polarity. Once the battery is installed reassemble the case. Next you will need to reset the time and date in the user menu. After this your GasAlertExtreme will be ready to use again.

6231MKA pH/mV/Temp Microprocessor Handheld Meter with 3-Point Calibration Kit by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

Includes:

• 6231M: Meter with memory
• Choice of 6230A: Glass Temperature Probe. 3-ft Or 6230AST: Stainless Steel Temperature Probe, 3-ft

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

08080-76 Stainless Steel Bimetal Pocket Thermometer, 1" Dial, Poly Lens, 8" Stem, -40-160F, 2F Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test, and a plastic storage sleeve with pocket clip

08080-89 Stainless Steel Bimetal Pocket Thermometer, 1.75" Dial, Glass Lens, 8" Stem, 50 to 500F, 5F Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test and a beaker clip.

765TF Thermocouple Panel Thermometer, Type T, Range -157°F to 752°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

99F38034 CellarSafe 110V without Oxygen Sensor or Battery - USA 2-Pin Plug by Crowcon

From fermentation through to distribution, Carbon Dioxide is one of the most common hazards to health in breweries, cellars and drinks outlets. It is also the fourth most abundant gas in the atmosphere. Long term exposure to only 0.5% volume represents a toxic health hazard. Concentrations greater than 15% volume can lead to death. CellarSafe has been designed specifically to warn personnel of these hazards.

CellarSafe, the cost effective CO2 and Oxygen monitor you can trust.

Simple to use

• Clear back-lit display for gas readings
• Bright LEDs and loud, distinctive alarms
• Single button for routine operation and testing
• Plug-in repeater units complete with cable
• Calibration unit with automatic sequencing
• No specialist cabling required

Secure and robust

• IP65 protection against dust and water ingress
• Tough polycarbonate case
• Wide operating temperature range
• Battery backup for mains failure (optional)
• Dual-band infrared sensor for carbon dioxide

Protect yourself

• Continuous monitoring for carbon dioxide in cellars and other confined spaces
• Optional oxygen monitoring for other asphyxiation hazards
• Automatically turn on ventilation fans
• Factory set alarm levels

Save money

• Only turn on ventilation fans when they are needed
• Long-term maintenance-free operation
• Minimal sensor calibration requirements
• Minimum of 5 year life sensors

619F pH/Temperature with Graphical Display and Replaceable pH Electrode by Jenco

VisionPlus pH619 fits the gap between the top of the line pH618N and the lower end pH630. With IP67 body, temperature readout, menu driven operation and replaceable electrode module. VisionPlus pH619 is a powerful and easy to use pH tester. Available in two different models: one for °Celsius temperature readout and one for Fahrenheit temperature readout.

VisionPlus pH619 is RoHS compliant.

• Graphical LCD provides on-screen menu selection for manual-free, easy operation.
• On-screen messaging displays useful information such as meter status, buffer selection and operation modes. no more guess work involving cryptic indictors or flashing digits.
• 4-button keypad provides intuitive operation with separate buttons for data hold, calibration, data memory storage and memory retrieval.
• IP67 rated, water-proof dust-proof body.
• Glass bulb electrode exposes more measuring surface to solution for fast response time.
• Surface mounted temperature element improves temperature accuracy and response time.
• Clear LCD displays pH and temperature at the same time, along with meter status, calibrated buffers, status, date and time.
• Large temperature range for wide range of applications.
• 1,2, or 3 point calibration, with automatic buffer recognition of us and nist buffer sets.
• Calibration data is stored in memory, ready for use on power up, even when batteries are removed.
• Readings are automatically compensated for temperature (ATC).
• Data hold for convenient reading.
• Watertight case is ideal for rugged use. protective cover for pH electrode is included.
• Replaceable electrode module ensures extended usefulness.
• Belt clip which also attaches to neck strap.
• 1 year warranty.