Ph Meter

SCT-108.002.11 SCT DEON pH/ORP/Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combination electrode
• Plastic ORP combination electrode
• Plastic conductivity electrode
• DO electrode
z
• pH standard buffer solution
• 1413us/cm conductivity standard solution
• Membrane cap
• DO electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP, conductivity and dissolved oxygen measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Multi-parameter meter, equipped with pH electrode, ORP electrode, conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Automatic identification of 12 pH standard calibration solutions, three options of standard buffer solutions: Europe and America series & nist series
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

BU1245-P Buffer, pH 12.45, 500mL by AquaPhoenix

• ± 0.01 at 25°C

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 500 mL
• pH Value: 12.45

BU5006-Q Buffer, pH 6.00, 1L by AquaPhoenix

• ± 0.02 at 25°C

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 1.00 L
• pH Value: 6.0

SCT-108.003.02 SCT BEN-pH-2 pH Meter with ATC & RS232 by ScichemTech

SCT basic benchtop pH/ORP/temp meter with ATC and with RS232 suitable for general pH measurement in laboratory

Includes:

• Plastic pH combination electrode
• Standard solution pH 4.00, 7.00, 10.01 (50 ml)
• 9V power adapter
• Electrode holder
• Operation manual

Features:

• SCT benchtop meter is designed to measure pH,ORP, temperature.
• Large LCD with blue background can display both pH and temperature value at the same time.
• It has intelligent functions for automatic calibration, automatic temperature compensation, data storage/recall, and memory max. and min. value etc.
• 1~3 point automatic calibration, and it can automatically display the percentage of slope after finishing calibration
• °C and °F can be switched freely.
• SCT benchtop meter meets ISO9001:2008 & CE standards

Mi151 pH / ORP / Temperature Laboratory Bench Meter by Milwaukee

This high performance economy microprocessor-based pH/ORP/Temp Bench meter is an ideal tool in schools, laboratories and production plants. It is provided with a series of new diagnostic features which add an entirely new dimension to the measurement of pH, by allowing the user to dramatically improve the reliability of the measurement:

• Automatic Temperature Compensation (ATC) for good accuracy under fluctuating temperatures
• Hold Function freezes reading for easy viewing
• Easy to read large custom LCD
• Stability Indicator prompts whenever reading stabilizes
• 7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45) for calibration
• Messages on the LCD to make the calibration easy and accurate
• User-selectable �calibration time out� to remind when a new calibration is necessary

Mi151 can also measure with ORP electrodes, thanks to its capability to measure mV with a resolution up to 0.1 mV. For accurate measurements, use the electrode holder supplied with the meter.

WD-35418-00 pH 600 Portable Waterproof pH Meter with All-in-One pH/Temperature Probe by Oakton

Expanded range, resolution and accuracy, increased memory, and advanced communications

These waterproof handheld meters feature a 2.00 to 19.99 pH range expandable to 0.001 pH resolution. Combined with accuracies up to ±0.002 pH, these meters provide a new benchmark in our pH meter line.

Store up to 500 data sets in the meters memory. Time-and-date-stamping meets Good Laboratory Practice (GLP) standards.

The pH 600 meters offer the latest in calibration capabilities including up to 6 calibration points, a user-settable calibration due alarm, and up to 15 buffer options with auto buffer recognition of USA, NIST, DIN, and PWB standards.

The infrared IrDA wireless technology makes PC downloading more convenient and easier. Dual power up allows you to use batteries while out in the field or the optional AC power adapter while in the lab.

As always, our waterproof meters are IP67-rated for both dust and water intrusion. Even with no probes attached!

• No more excuses for missing data! Out-of-date or unperformed calibrations are now things of the past!

BU5002-P Buffer, pH 2.00, 500mL by AquaPhoenix

• ± 0.02 at 25°C

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 500 mL
• pH Value: 2.0

BU1245-Q Buffer, pH 12.45, 1L by AquaPhoenix

• ± 0.01 at 25°C

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 1.00 L
• pH Value: 12.45

5005KA pH Meter Kit by Jenco

pH/mV/Temp. handheld meter with build in tabletop stand with LCD digital display. Meter has both ATC and manual temperature compensation. pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Features include a voltage recorder output, reference input pin and BNC input connector. AC/DC Powered.

Includes:

• 5005 pH/mV/Temp. handheld meter
• 600P pH electrode
• 5005F carrying case with pH 4 & 7 capsules

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Greater than 100db 50/60hz rejection
• Battery low indicator
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output
• Rugged carrying case
• UL approved ac line adaptor
• Aconventional 9v battery
• Manual and ATC for pH measurement
• 0 to 100.0 °C range of temperature measurement
• 0.5 high liquid crystal display readable under bright ambient conditions

PH700 Benchtop pH Meter by Apera

The Apera Instruments PH700 benchtop pH meter provides quick and stable pH readings for basic laboratory testing and educational purposes at an outstanding cost-effectiveness.

Reliable Measurement: With its quality 3-in-1 Combination pH electrode and the advanced digital processing technology, the measuring of pH and temperature is quick, accurate and stable (accuracy: ±0.01 pH, range: 0 to 14.00 pH). Splash-proof and Dust-proof structure design, ideal for use in harsh environment.

Intelligent Functions: Quick& Easy Auto Calibration: automatically recognizes 6 types of pH standard solutions. 0 to 100°C auto temperature compensation. 50 groups of data storage. Max/Min measuring mode available, alternately displaying the maximum and minimum readings.

Comes with an easy-to-install electrode holder and 3 bottles of premixed pH calibration solutions (4.00, 7.00, 10.01). The product is CE certified and comes with a Two-Year warranty for the meter; 6 months for the electrode.

• Equipped with 201T-S 3-in-1 Combination pH Electrode, Auto Temp. Compensation, measuring pH and temperature simultaneously
• Advanced Auto Calibration Mode with Calibration Guide and Self-Diagnosis
• Advanced digital processing technology helps generate quick and stable readings
• IP54 Spill-proof and Dust-proof, durable and reliable
• Comes with easy-to-install electrode holder and pre-mixed calibration solutions
• 50 Groups of Data Storage

397 Pen Style pH Meter by Test Products International

TPI Model 397 Pen Style pH Meter. Accurate pH Tester Pen.

Features

• Wide pH range of 0.10-14.00pH covers most applications
• Operating temperature from 40 -120 °F (5 - 50 °C); for temperature compensated readings
• Waterproof design protects the meter during use
• Low power consumption extends battery life for low operation costs
• Auto-off function turns power off automatically after 10 minutes
• Replaceable Glass Test Tip Electrode that screws on for ease of use
• Protective case included for storage

Applications

• Boiler water testing for proper pH level to avoid internal material degradation
• Check automotive radiators to avoid acid level build up resulting from dissimilar metals
• Onsite water testing for wells and septic systems; saving lad testing time
• Quickly and easily test aquariums, spas and swimming pools for proper pH levels

WD-35418-12 pH 610 Portable Waterproof pH Meter by Oakton

Expanded range, resolution and accuracy, increased memory, and advanced communications

These waterproof handheld meters feature a 2.00 to 19.99 pH range expandable to 0.001 pH resolution. Combined with accuracies up to ±0.002 pH, these meters provide a new benchmark in our pH meter line.

Store up to 500 data sets in the meters memory. Time-and-date-stamping meets Good Laboratory Practice (GLP) standards.

The pH 600 meters offer the latest in calibration capabilities including up to 6 calibration points, a user-settable calibration due alarm, and up to 15 buffer options with auto buffer recognition of USA, NIST, DIN, and PWB standards.

The infrared IrDA wireless technology makes PC downloading more convenient and easier. Dual power up allows you to use batteries while out in the field or the optional AC power adapter while in the lab.

As always, our waterproof meters are IP67-rated for both dust and water intrusion. Even with no probes attached!

• No more excuses for missing data! Out-of-date or unperformed calibrations are now things of the past!

BU5006-G Buffer, pH 6.00, 4L by AquaPhoenix

• ± 0.02 at 25°C

pH Buffer should be used regularly, typically every day the meter is used to calibrate your pH meters. Pour buffer into a clean separate container and never return used or unused buffer back into the container. Always keep tightly capped and adhere to the expiration date which is printed on the label.

Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 4.00 L
• pH Value: 6.0

WD-35801-80 Flushable, Double-junction, Epoxy-body, Refillable pH Electrode (Use with pH 10, pH 100, pH 500, pH 1000, pH 2500 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer other All-in-One electrodes

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a mini phono plug connector for temperature

BU5007-Q Buffer, pH 7.00 ± 0.01 at 25°C, 1L by AquaPhoenix

• Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 1L
• pH Value: 7.00 (color coded yellow)

PHC20101 Hach IntelliCALZ PHC201 Standard Gel Filled pH Electrode, 1 meter cable by AquaPhoenix

IntelliCAL™ PHC201 is a digital, combination pH probe with a non-refillable, gel-filled double junction reference and built-in temperature sensor. It is available with a 1 or 3 meter cable and is intended for laboratory use. The PHC201 has a ceramic pin reference junction and is ideal for measuring pH in general water quality applications.

• IntelliCAL™ PHC201 provides fast, stable response in water quality applications
• IntelliCAL™ digital probes provide ultimate traceability in measurement history
• IntelliCAL™ digital probes alert the user when re-calibration is needed
• IntelliCAL™ digital probes can be moved between meters without the need to re-calibrate or re-enter measurement settings

PH400 Portable pH Meter by Apera

The Apera Instruments PH400 is the most economical choice for a reliable portable pH meter. Equipped with high quality 3-in-1 combination pH electrode, the meter tests pH and temperature simultaneously in a quick and accurate manner (Accuracy: ±0.01 pH, Range: 0 to 14 pH, 0 to 100°C Auto or Manual Temperature Compensation) Quick & Easy 3-Point pH Auto Calibration. The Smart Self-Diagnosis helps you conduct proper calibrations and determine the condition of your probe. Fully configurable parameter setting: pH buffer standards, temperature unit, backlight time, auto-power off time. The large clear LCD displays pH/Temperature simultaneously along with icons of stable readings and finished calibrations.

Reliable Structure, IP57 Waterproof and Dustproof, ideal for use in harsh environments. It comes with a complete test kit including a meter, a pH electrode, and 3 calibration solutions (pH 4, 7, 10) in a rugged carrying case. Powered by AA Batteries. Two-Year warranty for the meter. CE certified.

• The high quality 3-in-1 Combination pH Electrode generates quick and accurate pH readings
• IP57 Waterproof and Dustproof, ideal for use in harsh environments
• The large clear LCD displays pH/Temperature simultaneously along with icons of stable readings and finished calibrations.
• Smart Self-Diagnosis helps you conduct proper calibrations and determine the condition of your probe
• Comes with a complete test kit in a rugged carrying case. 2-Year Warranty.

WD-35812-48 Water hardness Ca+2,Mg+2 Double-junction Ion-Selective Electrode (ISE) by Oakton

Double junction makes these electrodes ideal even for rugged applications

Use these economical Ion Selective Electrodes (ISEs) with the ION 510 meter, pH 2500 Ion benchtop meter, or the Ion Acorn meters. They also are suitable for use with any other ion meter, or with any meter with 0.1 mV resolution. All ISEs feature a BNC connector and 3-ft cable.

ISE solution kits contain the solutions and accessories needed for calibration, sample preparation and measurement of ion concentration and activity. All solutions are supplied with MSDS (Material Safety Data Sheet) and have a value of 1000 ppm.

• Each features a BNC connector and 3-ft cable

MW101 Standard Portable pH Meter with 0.01 pH Resolution by Milwaukee

Standard portable meters with no frills! Milwaukee's durable meters for quick and reliable measurements.

Milwaukee's Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use.

MW101 performs pH measurements with a 0.01 pH resolution and with manual temperature compensation. The meter is supplied with pH electrode and calibration solutions.

WD-35618-30 pH 450 Portable Waterproof pH Meter and Electrode by Oakton

The pH 450 meter offers an IP67-rated waterproof housing, making it ideal for the manufacturing floor, field testing, and the laboratory. The large, backlit LCD lets you view the main measurement simultaneously with temperature and calibration data with % slope. Calibrate pH and ISE with up to six points from USA, NIST, DIN, PWB and custom pH buffers. Automatic temperature compensation (ATC) ensures measurement accuracy even in fluctuating temperatures. Select temperature reading from degree C or degree F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery-life indicator, and electrode status.

Perform data logging with manual or timed collection of up to 500 data sets with real-time clock time/date stamp. Order optional data cables for USB or RS-232 connectivity.

• Intuitive, user-friendly icons--electrode status displays pH slope
• Grip-Clip electrode holder quickly and easily secures electrode to side of beaker or container
• USB or RS-232 output for up to 500 data sets
• Extended battery life or optional universal power adapter
• 700 hour battery-life, or optional AC power adapter
• Built-in stand with wall mount option allows for easy benchtop measurement or storage