All Products

67400 GT-40 Portable Gas Detector - ppm / LEL / GAS / CO by GMI

Designed for the gas industry, the GT Series are multi-application instruments, satisfying all the needs of service technicians within a single unit. With 7 modes of operation, the GT Series is the most versatile instrument available for working with gas.

The GT 40 series offers technicians and workers a single instrument that can be used throughout the gas distribution and transmission pipelines for all measurements needed for leak testing, and confined space entry. Bright LED alarm lights illuminate as gas levels increase, and audible alarms are activated at preset levels should they be programmed. Completely programmable, the GT is an industry standard throughout the Americas and Europe and allows companies to utilize only one instrument for all their monitoring needs. The GT series is available with an optional docking station for full calibration and testing capabilities, and printed cal certificates if needed.

Features

• Measures up to 4 gases
• Gas leak detection
• Confined space monitoring
• Surveying and purging
• PPM, LEL and Volume Methane flammable gas ranges for leak detection
• Manual and automatic datalogging
• Loud audible and high visual 'ticker' (Geiger) on ppm range
• Integral flashlight
• Alkaline or rechargeable battery options
• Charging via simple power cable or docking station
• Rugged polycarbonate case, sealed to IP54

7 Application Modes

• Leak Test Mode measures methane in three different distinct ranges (ppm/LEL/%Volume). Autoranging between all three ranges, audible, visual, and gieger alarms, and ergonomical design allows for easy one handed operation. Also ideal for carbon monoxide investigations.
• Confined Space Mode measures up to 4 gases (O2, LEL, CO, H2S) simultaneously with audible visual alarms, datalogging, and min/max values.
• Bahole Mode for testing undrerground leaks. In this mode the GT measures gas beginning in the LEL range and autoranges to % Volume. Barhole probe included with instrument.
• Carbon Monoxide Mode measures CO directly in ppm. Menu items for air free CO (O2 correction) when fitted with an O2 sensor, and differential CO.
• Purge Mode for measuring methane from 0-100% Volume in inert atmospheres.
• Sniffer Mode enables rapid leak detection by measuring methane 0-10000 ppm with the semi-conductor fitted at the end of the flexi probe. Audible/visual gieger allows for easy pinpointing of leaking pipes.
• Pressure Mode measures from 0-60" of water column via a pressure sensor on the back of the instrument. Ideal for tightness tests on gas systems up to 2 PSI.

Includes

• User Handbook
• Quick OP Instructions
• Calibration Certificate
• Configuration Report

CL-H-5 Clip SGD Maintenance Free Single Gas Disposable Monitor, H2S 5/10ppm by Crowcon

Clip Single Gas Detector (SGD) is designed for use in hazardous areas and offers reliable and durable fixed life span monitoring in a compact, lightweight and maintenance-free package. Clip SGD has a 2-year life and is available for hydrogen sulphide (H₂S), carbon monoxide (CO) or oxygen (O₂).

Clip SGD is designed to withstand the harshest industrial working conditions and delivers industry leading alarm time, changeable alarm levels and event logging as well as user-friendly bump test and calibration solutions.

Easy to maintain

• Changeable alarm levels - ensures compliance with changing regulations or company procedure
• Clip SGD docking station - keeps monitors correctly configured without service or technician team
• 'Bump test due' indication - alerts the user and team members that the monitor is not compliant and requires a bump test

User-friendly

• Compact and lightweight - non-intrusive and comfortable to wear, perfect for any length of shift
• Single button operation - delivers simplicity for users and reduces training time

Efficient

• Wide operating temperature range - effective in a wide variety of harsh environments
• Water and dust resistant to IP66 and IP67

T02-0103-000 AutoRAE 2 Cradle for MultiRAE Pumped Models by RAE Systems

The AutoRAE 2 Automatic Test and Calibration System for RAE Systems portable monitors makes instrument testing and calibration compliance as easy as pressing a button. Simply cradle the monitor, and the system takes care of calibration, testing, and battery recharging.

The AutoRAE 2 system is flexible and modular, and can be configured to efficiently meet your calibration and records management requirements. An AutoRAE 2 system can be as simple as a single cradle deployed in stand-alone mode to calibrate one instrument at a time, or as powerful as a networked, controller-based system supporting 10 instrument cradles and 5 distinct calibration gases or gas mixtures.

Key Features

• Automatic testing, calibration, charging system
• Deployable as a stand-alone cradle or a controller-based system with up to 10 cradles
• Controller with a large, color LCD display
• Networking capability
• Up to 5 calibration gas cylinders can be connected at the same time
• Automatic instrument FW update option
• Instruments datalogging file recorded automatically on controller SD card
• Bench-top or wall-mounted use
• Instruments supported: ToxiRAE Pro Series/QRAE3, MicroRAE/MultiRAE Series (except diffusion model)
• Single Cradle for all Handheld PID, QRAE 3 and ToxiRAE Pro family instruments

Industries

• Oil and Gas
• Industrial
• Environmental
• Fire Service
• National Security

Part Number: U105325PN

Part Number: 116L-111-50

Part Number: U1053500PA

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.

EC22-710 EC 22 Fixed Transmitter with Hydrogen Sulfide (H₂S) Sensor, 0 - 500 ppm Range, No Display / 4-20 mA by GfG

The EC 22 Series are innovative and cost-effective transmitters for the detection of toxic gases or oxygen levels, but without the need for explosion protection.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Universal signal transmission

Either an analog or digital output signal can be transmitted by the EC 22 by means of a Modbus interface. Due to the different types of signal transmission, a transmitter from the 22 series can be connected to almost any gas detecting system, also as a supplementary or replacement transmitter on existing systems.

Signal processing

The embedded software of the EC 22 linearizes the measuring signal and compensates for the effects of temperature. As a result, correct readings are transmitted even with weather related fluctuations in temperature. In addition, the transmitter also offers the option of transmitting service, maintenance, and error messages to a connected gas measuring computer.

Weather protection

A weatherproof housing not only protects transmitters against exposure to wind and weather, but also against contamination and excessive temperatures caused by direct sunlight.

Optional colored graphic display and horn

The clear graphic display of the EC 22 is self explanatory and allows you to read the current status and other important information with ease. The display enables you to navigate effortlessly through the unit s concise menu and to change settings or even calibrate, depending on your user authorization. In the event of an alarm the display changes color from green to red. Two LEDs indicate the status.

Operation buttons

The buttons on the transmitter allow the unit to be calibrated and settings to be adjusted through the menu as needed.

Calibration adapter

In order to perform regular bump tests, a calibration adapter is used on the transmitter, which ensures a uniform and secure supply of gas.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Features

• Long service life of the sensors
• High efficiency and low follow-up costs
• Sturdy plastic housing (IP-54)
• Cost effective single-man adjustment
• Affordable solution for many measuring tasks

Part Number: HOSE120

DP-ACAGCNCS-D001-B Detective + Transportable Area Monitor, 4 Gas - PENT % LEL, O2, H2S, CO (H2 filtered), Pumped, Standard Battery with Rigid Legs English ATEX by Crowcon

Detective+ is a multi-gas temporary area monitor for use in turnaround/shutdown procedures, hotwork maintenance, confined space entry work and many other utility, construction and oil and gas industry applications. Go solo or link together using Detective Net or cables to form a perimeter, Detective+ gives a loud and clear alarm providing effective warning of gas hazards. The rugged, water and impact resistant design make Detective+ the ideal choice for your transportable gas detection needs.

Versatile and user friendly

• Infrared sensors available - Allows sampling of highly flammable gas levels and carbon dioxide Unaffected by poisoning and has a very fast response time
• Built in pump option - Provides sampling versatility
• Built-in display - Provides clear information, allows identification of gas hazard

Rugged, tripod design

• Raised sensor apertures - Prevents water ingress
• Triple leg design - Increases unit physical visibility and is the perfect height to allow 360 gas inlet
• Folding leg option - Allows stacking for easier storage and transportation
• IP65 specifications - Provides excellent sensor protection for use in challenging environments

Loud and clear alarms

• Network ready - Detective NET 25 units: 25 units can be networked together forming effective perimeter defence. When one alarms, all units on the network alarm. Detective+ with cables 12 units
• Intelligent & flexible - Units on the network can be placed up to 100m from each other. When in alarm the unit which triggered the alarm flashes faster than the others
• Audible and visible confidence blip - Provides guarantee to the user that the unit is functioning properly and that they are protected
• High visibilty - Vivid red LED clusters combine with an extra loud siren to give very clear alarm notifications
• Multiple beacons - Ensures 360° visibility

Part Number: J1016.5PA

*Please note we can only ship RKI products to customers within the United States

Part Number: 17L-50-200

BW Technologies GasAlertMax XT II Replacement Screw Kit (40 Screws)

The GasAlertMax XT II Replacement Screw Kit comes complete with 40 screws that are compatible with the BW Technologies GasAlertMax XT II portable gas detection system. The replacement screw kit includes enough screws for several replacement incidents. BW Technologies offers a full range of portable gas detection systems and manufactures a wide variety of accessories and replacement parts that extend the lifespan of your BW Technologies device. For more information about your device's compatible replacement parts and accessories, please consult your product's specification sheet.

Part Number: XTSCREWK1

SPXCDULNFX UL/CSA/INMETRO approved SP XCD Flammable CAT 0-100%LEL (20 to 100%LEL, 10%LEL) with LM25, 3/4 NPT Entry by Honeywell Analytics

Honeywell can trace its company roots back nearly 125 years. What started off as a company dedicated to heating technologies has blossomed into an enterprise dedicated to a variety ofsafety, security, and energy solutions. By integrating the most advanced technologies with intuitive designs, Honeywell has established itself as an industry leader in workplace safety products and gas detection solutions. The company s commitment to advancement and growth help pave the way for innovation and creativity in design. The Sensepoint XCD detection system is the epitome of product advancement. Building on 125 years of industry experience, Honeywell has introduced a comprehensive monitoring system that is reliable, dependable, and state of the art.

Sensepoint XCD

With the Sensepoint XCD detection system, Honeywell provides easy to use, low maintenance sensory devices for monitoring explosive atmospheric conditions in a variety of industrial settings. The Sensepoint XCD system monitors for explosive oxygen gas, toxic gas, and flammable conditions and constantly relays status through transmitters utilizing a simply traffic light LCD system which can be easily seen and understood from a distance.

Superb Versatility

The Sensepoint XCD system provides a catch all-detection system which has worldwide industry approvals and is compliant with all relevant standards. Suited for indoor use as well as the harshest outdoor conditions, the Sensepoint XCD systemis a versatile product for use in any potentially dangerous industrial atmosphere. The unit is available in both stainless steel and aluminum housing options, both of which are resistant to explosions. The XCD transmitter systems are for three separate environmental conditions (flammable, toxic, and oxygen). Each transmitter has a variety of sensors available for use. Each transmitter will automatically recognize the sensor within its category. The plug-in design of the sensors allows users to simply plug the sensor into the transmitter. The transmitter will automatically adjust and configure for the appropriate sensor settings.

Simplicity in Design

The Sensepoint XCD system is easy to install with a simple plug-in design, a built-in mounting system, and comes equipped with versatile wiring receptions to limit compatibility issues for the end user. Once installed, the system utilizes a traffic light type display of green for normal, yellow for warning, and red to alert an atmospheric issue. The maintenance of the system is just as user-friendly with routine maintenance easy and ergonomic enough to be done by one person. The system is also simple enough that it can be used and maintained with little training.

Cost Savings

The Sensepoint XCD system provides a business with cost reductions in both hardware and staffing. The versatile usage and low maintenance of the system reduces the resources needed to monitor conditions and allows personnel to focus on their tasks at hand. The system also provides personnel, and any other parties in the area, peace of mind that their conditions are being constantly monitored for danger and relayed in a way that anyone can detect and bring awareness to dangerous conditions.