All

0554 2117 Vacuum hose low loss by Testo

The vacuum hoses are compatible with all common refrigerants and offer a high level of safety thanks to their robust construction. Made of high-quality materials, they meet SAE J2196 standards and minimize refrigerant loss.

• Compatible with all common refrigerants
• Robust construction and pressure resistance: Working pressure of 55 bar / 800 psi, burst pressure of 276 bar / 4000 psi for safe performance
• Made of high-quality materials for maximum reliability, meets SAE J2196 standards
• Permeation barrier: Minimizes refrigerant loss for precise evacuation
• Thread: 3/8" SAE
• Length: 1.5 m

Includes:

• Vacuum hose 3/8" SAE

7710-KIT 7710 Rechargeable Hard Hat Safety Light, Cord Free, Lightweight, Includes Charger by Western Technology

The 7710 - HALO LED Hard Hat Light is a Personal Active Safety System that attaches to any hard hat and produces a ring of light around the wearer enabling him or her to See and Be Seen in all directions at all times. The Halo was specifically designed for people working in tough environments.

*Includes 1 x 18650 Rechargeable Lithium-Ion battery.

Features

• Lightweight and cord-free
• Visible over 1/4 mile away in all directions at all times
• Powerful flood task light for improved work efficiency
• Fully illuminates the task area out to the visual periphery
• Eliminates shadows no matter where you move
• Four light modes: Halo, HI-Alert, Task, Dim
• Built tough to survive in rough work environments
• Rechargeable battery runtime of 5.5-34 hrs (mode dependent)
• Connects securely to any hard hat
• IP Rating of 67 to protect against dust, dirt, and water
• Easy single button functionality
• One year warranty

5933-0109 GDC-350 Gas Sensor Monitor, NEMA 4 Housing, CO/SO2 by Bacharach

Bacharach's all new GDC-350 full-featured fixed gas monitors provide superior operation - standalone or as part of a larger system utilizing the standard analog outputs. This state-of-the-art instrument can detect a wide range of gases including carbon monoxide (CO), oxygen (O2), combustible gases, refrigerants and total volatile organic compounds (TVOCs). The GDC-350 provides a unique two sensor interface, allowing for multiple gases to be detected with onboard or remote sensors. Sensors can be located integral to the unit or remotely allowing for sensors to be placed directly in areas where potential leaks can occur. Bacharach s proprietary calibration algorithms extend the amount of time required between calibrations, reducing maintenance costs and lowering the overall cost of ownership for non-critical applications.

The GDC-350 has all the features and functionality for any application. LED alarm indicators visually indicate when alarm conditions are met and an audible alarm alerts nearby personnel. An onboard alpha numeric display shows gas readings in real time for each sensor. Integral dry contact relays are available to drive external audible / visual alarms, activate fans, or connect to building management and control systems. Installation and maintenance is simple and easy, reducing overall system cost. A pre-wired plug-in option is available for out-of-the-box operation. Simply plug the unit into any standard AC outlet for immediate detection and protection.

6150-2112 MGD-100 Gas Detection System, R600a: 0 - 2,000 ppm, 4 Sensors, 2 Alarms, IP66 Housing, 110 VAC by Bacharach

Bacharach's MGD-100 Series is a robust and scalable gas detection system used for reliable real-time monitoring of refrigerant, combustible, and toxic gases. It's a stand-alone system that alarms when pre-set thresholds are exceeded. The MGD-100's alarms are monitored by a centralized controller, which can alert personnel of potential hazardous conditions via an onboard buzzer and LED alarm indicators.

MGD-100 Systems can be configured from single-sensor, one-alarm level systems to larger scale systems consisting of 6 sensors with 2 alarm levels. This flexibility allows the platform to be used for both small and large systems.

Ideal for Chiller Rooms, Supermarkets, Brewing and Bottling Facilities, Industrial Refrigeration, Arenas, Food Storage and Processing Facilities.

Features & Benefits:

• Stand-alone, out-of-the-box solution with quick and easy installation - the most cost-effective system available.
• Fast-response sensors detect leaks quickly, which minimize refrigerant gas usage and environmental impact.
• Infrared (NDIR) CO2 detection
• Long-life semiconductor sensors for detection of all refrigerants, ammonia, halocarbons, combustibles & VOCs
• Robust design allows units to be placed directly in areas where detection is needed.
• Available in a variety of housings, including IP66 and duct mount.
• Select from 1, 2, 4 or 6 remote sensors and 1 or 2 pre-set alarm levels, which can be connected to BMS systems.

WD-35441-70 DO 600 Portable Waterproof Dissolved Oxygen Meter with Kit by Oakton

Fast dissolved oxygen measurement with automatic pressure compensation

• Includes probe with 10-ft cable, electrolyte solution, rubber boot, replacement membrane caps, hard carrying case, and batteries
• Durable waterproof and dustproof design with IP67 rating Even with no probes attached
• Single or multipoint calibration Fast, trouble-free calibration in air
• Large backlit graphic display Multiline display with electrode status indicator, calibration data, and more
• User-settable calibration due alarm Out-of-date or unperformed calibrations are now a thing of the past!
• Built-in real-time clock Time-and-date stamping meets Good Laboratory Practice (GLP) standards
• Advanced data management Store up to 500 data sets and download via IrDA wireless interface
• Set point alarms Audible warning when readings are outside set points limit
• No meter warm-up required Galvanic probe design lets you take measurements immediately without the typical 15-minute wait!
• Password protection Security for calibration and setup menus
• Rugged rubber boot Protects meter when out in the field

37803-92 Traceable® RTD Thermometer with Calibration; -58 to 752F/-50 to 400C by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Size: 7 x 3 x 1.25"; probe dimensions are 6 x 0.13" diameter, overall stem length 12"; cable length 40"; weight: 9.5 oz

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Temperature range is -58° to 752°F and -50° to 400°C
• Accuracy is ±0.15°C and resolution is 0.01°C across the entire temperature range
• Min/Max memory/HOLD/platinum probe
• IP67 waterproof housing for rugged applications
• Increase versitility with timer and alarm functions
• Green and red light HACCP indicator
• Removal of PC serial interface

Includes

Platinum probe, 9-volt battery, and NIST-traceable calibration certificate with data.

6130-2121 MGD-100 Gas Detection System, VOC: 0 - 2,000 ppm, 2 Sensors, 2 Alarms, IP66 Housing, 110 VAC by Bacharach

Bacharach's MGD-100 Series is a robust and scalable gas detection system used for reliable real-time monitoring of refrigerant, combustible, and toxic gases. It's a stand-alone system that alarms when pre-set thresholds are exceeded. The MGD-100's alarms are monitored by a centralized controller, which can alert personnel of potential hazardous conditions via an onboard buzzer and LED alarm indicators.

MGD-100 Systems can be configured from single-sensor, one-alarm level systems to larger scale systems consisting of 6 sensors with 2 alarm levels. This flexibility allows the platform to be used for both small and large systems.

Ideal for Chiller Rooms, Supermarkets, Brewing and Bottling Facilities, Industrial Refrigeration, Arenas, Food Storage and Processing Facilities.

Features & Benefits:

• Stand-alone, out-of-the-box solution with quick and easy installation - the most cost-effective system available.
• Fast-response sensors detect leaks quickly, which minimize refrigerant gas usage and environmental impact.
• Infrared (NDIR) CO2 detection
• Long-life semiconductor sensors for detection of all refrigerants, ammonia, halocarbons, combustibles & VOCs
• Robust design allows units to be placed directly in areas where detection is needed.
• Available in a variety of housings, including IP66 and duct mount.
• Select from 1, 2, 4 or 6 remote sensors and 1 or 2 pre-set alarm levels, which can be connected to BMS systems.

0572 1844 184 T4 Dry Ice Temp Logger by Testo

The data logger testo 184 T4 is designed for lowest temperatures down to -80 °C, such as occur in dry-ice cooled transports (e.g. blood plasma). Special components are used, allowing monitoring at operating temperatures of -80 °C.

At their destination, you see at a glance whether the configured limit values have been adhered to. In order to obtain detailed information, it is sufficient to connect the logger to a PC - a PDF report is immediately generated with all relevant data.

In order for you to be able to work even more efficiently and conveniently with the data loggers, all required files and information are stored directly and securely in the testo 184 T4: Configuration file, acceptance test certificate, instruction manual and PDF report of your recorded data.

• Clear alarm indication
• Easiest operation
• Easiest configuration without software installation
• Convenient readout thanks to automatic PDF report
• Specially for transports up to -80 °C

90452-19 Precision Industrial PRT, 0.187" x 9", -60~300C, 5-Pin Din by Digi-Sense

AM1620 Series - Precision industrial PRT/RTD probes: Conform to the standard 385 curve, letting you use your DIN/IEC RTD meters fully. Manufactured using a coil suspension element design for increased shock and vibration resistancealong with flexibility and durability. All have an accuracy of 35 mK at 0°C and short-term stability of 10 mK at 0°C. The AM1620 has a range of -60 to 300°C (-76 to 572°F)

72-9HBAXB-B GX-9000H Multi Gas Detector, O2/low H2S/high H2S/IR CH4, Li-ion with AC adapter by RKI Instruments

The GX-9000 Marine Gas Monitor sets the new industry standard for rugged, reliable portable gas detection. It's tough, water proof design utilized features based on years of gas detection design experience, to assure that the instrument will operate properly to protect workers and property in all kinds of harsh gas detection applications.

Features

• Simultaneous detection of up to 6 gases
• Sensor warranty up to 3 years
• Explosion-proof, dust-proof and waterproof (equivalent to IP66/68), 1.5m drop durability
• Equipped with Bluetooth, Easy data management via smartphone
• Suitable for marine/onshore/underground work environments

Applications

• Confined Space Entry
• Refineries, Petrochemical, Chemical Plants
• Oil Tanker, Gas Carrier, Bulk Carrier
• Chemical Tanker
• Wastewater Treatment
• Fire Services
• Telecommunication Services
• Power Plants
• Gas Plant, Gas Supplier Services
• Utilities
• Coating Field
• Fuel Cell Facilities

*Please note we can only ship RKI products to customers within the United States

WD-35614-32 pH 150 Portable Waterproof pH Meter by Oakton

The pH 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you simply view the pH or mV measurement simultaneously with temperature and calibration % slope. Auto buffer recognition identifies the correct pH buffer for rapid, reliable calibration.

Calibrate meter with up to six points from USA, NIST, and DIN pH buffer sets. Automatic temperature compensation (ATC) ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and electrode status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

• Intuitive, user-friendly icons--electrode status displays pH slope
• Grip-Clip holder quickly and easily secures the electrode to your beaker
• Expanded data logging for up to 150 data sets
• mV offset for calibration of ORP standards, zeroing mV, and pH diagnostics
• 700 hour battery-life, or optional AC power adapter
• Built-in stand and wall mount option allow for easy benchtop measurement

AI1129-L pH 11.00 Calibration Buffer Solution 16oz by Apera

The Apera Instruments pH 11.00 Calibration Buffer Solution is standardized against NIST certified pH references within 0.01 pH at 25°C (77°F). It's ideal for the calibration of pH meters that have customized calibration functions (e.g. Apera PH800, PH820, SX811).

pH value is affected by temperature variations. A temperature/pH reference chart is provided on the bottle label for reference.

All the solutions are double-sealed, not subject to the DOT shipping restrictions, and have a 2-year shelf life. The expiration date is printed on the bottle. MSDS documents are downloadable.

Note: Store at room temperature and away from direct sunlight. Keep the bottle tightly closed when not in use. Keep out of reach of children.

• High Accuracy (±0.01 pH): standardized against NIST certified pH references within 0.01 pH at 25°C (77°F).
• Ideal for the calibration of all kinds of pH meters/testers
• Double-sealed, 2-Year shelf life
• Expiration date and Temperature/pH reference chart provided for reference
• Non-hazardous product (MSDS is downloadable)

6150-1111 MGD-100 Gas Detection System, R507a: 0 - 1,000 ppm, 4 Sensors, 2 Alarms, Standard Housing, 110 VAC by Bacharach

Bacharach's MGD-100 Series is a robust and scalable gas detection system used for reliable real-time monitoring of refrigerant, combustible, and toxic gases. It's a stand-alone system that alarms when pre-set thresholds are exceeded. The MGD-100's alarms are monitored by a centralized controller, which can alert personnel of potential hazardous conditions via an onboard buzzer and LED alarm indicators.

MGD-100 Systems can be configured from single-sensor, one-alarm level systems to larger scale systems consisting of 6 sensors with 2 alarm levels. This flexibility allows the platform to be used for both small and large systems.

Ideal for Chiller Rooms, Supermarkets, Brewing and Bottling Facilities, Industrial Refrigeration, Arenas, Food Storage and Processing Facilities.

Features & Benefits:

• Stand-alone, out-of-the-box solution with quick and easy installation - the most cost-effective system available.
• Fast-response sensors detect leaks quickly, which minimize refrigerant gas usage and environmental impact.
• Infrared (NDIR) CO2 detection
• Long-life semiconductor sensors for detection of all refrigerants, ammonia, halocarbons, combustibles & VOCs
• Robust design allows units to be placed directly in areas where detection is needed.
• Available in a variety of housings, including IP66 and duct mount.
• Select from 1, 2, 4 or 6 remote sensors and 1 or 2 pre-set alarm levels, which can be connected to BMS systems.

WD-37250-20 Long-Cycle Hygrothermograph by Oakton

Record up to 3 months of humidity and temperature readings on one chart!

Unit features a corrosion-resistant acrylic plastic case with tinted cover for easy viewing. Operates on one C battery for up to six months continuous use. Built-in battery test indicates battery condition with a button press. Unit includes red and blue pens, battery, and one roll of 1-month chart paper.

• Includes red felt-tipped pen, blue felt-tipped pen, roll of 1-month paper, C battery (1)
• Quartz controlled drive gives consistant drum rotation speed even as batteries weaken
• Record temperature and humidity on 1 or 3 month rotation
• Quartz-controlled strip chart drive consistently rotates chart drum even when batteries are weak

5201-2303 GDC-150 Gas Sensor Transmitter, NEMA 4 Housing, O2 Sensor, w/Display & Relay by Bacharach

The all new GDC-150 transmitter from Bacharach offers detection and protection for a wide range of hazards including toxic gases such as carbon monoxide (CO), oxygen depletion, combustible gases, refrigerant leaks and total volatile organic compounds (TVOCs). Analog interfaces allow the transmitter to be connected back to Bacharach's GDA Series of controllers (or any other gas detection controller), building management systems or control systems. The GDC-150 features 4-20 mA or 0-10 VDC linear output signals, an automatic thermal resetting fuse, RoHS compliant circuit boards and LED indicators for power and open loop.

The onboard alarm LED's indicate when alarm threshold values are exceeded. The unit can be ordered with an optional alpha numeric LED display that shows gas concentrations in real time while alarm relays alert personnel of potential dangers, avoiding incidents and potential hazards.

The GDC-150 is packaged in a rugged, polycarbonate housing for both indoor and outdoor applications. When leaks occur, the GDC-150 sensors respond quickly and accurately to protect people and property. Automated calibration and simple maintenance procedures performed in the field allow for continuous operation and assurance that areas are monitored and protected at all times.

610-1086-000 Single-Gas Calibration (Isobutylene, 10 PPM, Balance Air), 34 Liters by RAE Systems

Green cylinder technology not only saves the environment, it also saves time and money.

• Gas cylinder size options 34, 58 and 116 liter
• Green Refillable cylinder
• "Strip and Ship" program for easy return of empty cylinders
• Small cylinder footprint
• Cylinder technology offers exceptional gas stability
• All gas cylinders use the same valve

90205-02 Traceable® Pen-Style Digital Thermometer with Calibration, High-Accuracy; 11.5" L, 302F by Digi-Sense

NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money! Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Perfect-sized unit fits into flasks, cuvets, test tubes, and beakers. Read temperatures in foods, gases, samples, reagents, water baths, and semisolids. Stainless-steel probe is resistant to most laboratory chemicals. Long stem allows user to make measurements while stirring solutions in deep vessels. Almost unbreakable plastic and stainless-steel construction (no glass or mercury) makes it safe. Brilliant LCD is 1/4-inch-high. Designed for all ovens and incubators.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.