Nitrogen

2811-722-001 EC 28 Gas Transmitter with Sensor, Nitrogen Dioxide (NO2), No Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

VPE Basic Kit by Superior AccuTrak

The Patented Superior AccuTrak® VPE represents state-of-the-art technology for pinpointing leaks in air conditioning and refrigeration systems. AccuTrak® is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using a technology called "heterodyning" it translates the sound to a lower frequency which your ear can interpret. AccuTrak maintains the original sound characteristics making it possible to distinguish leaks from other competing background sounds. AccuTrak is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy.

Superior AccuTrak® advanced patented technology has never been so affordable! The AccuTrak® VPE Basic Kit is for technicians who require only the essentials to detect leaks using airborne ultrasound. As with all AccuTrak® instruments, the VPE finds leaks for any kind of gas or refrigerant without changing tips or components. Works equally well to find compressed air leaks, nitrogen leaks even vacuum leaks! AccuTrak® can find leaks as small as the equivalent of 1.5 oz per year of refrigerant, or can hear a 5 psi leak up to 30 feet away.

Kit Includes

• VPE Leak Detector
• Headset
• Battery
• Hard Case

Applications:

• Leak Detection: Air, Vacuum, Refrigerants; ANY GAS!
• Steam Traps: Detect live steam loss in seconds!
• Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!
• Bearing Wear: Hear wear and lubrication problems before damage is done!

Features:

• Audio Output: 0 Hz to 4 kHz Natural Sound conversion allows you to Hear the Leak, and distinguish leaks from mechanical or other background ultrasound.
• Visual Output: 10 element bar graph provides quick and intuitive visual indication to presence of and relative strength of ultrasound.
• Adjustable Sensitivity: allows operator to quickly identify leaks from a distance, and then zero in on the exact location of the leak.

Capabilities:

• Capable of detecting a 5 psi leak out of a 0.005" (5/1000 inch) hole, 20 to 30 feet away depending on background noise.
• Easily detects any gas that generates ultrasonic sound during flow including vacuum leaks.
• Capable of detecting leaks equivalent to 1.5 oz/year of Refrigerant.
• Works equally well for compressed Air or Nitrogen.
• Not affected by wind or high concentrations of leaked gas or refrigerant.

Kits for Every Application

Whether you only need the basic functions of the VPE or you plan to take full advantage of the instrument's diverse capabilities, we have a kit that will meet your needs! Click the "Find Your Kit" tab above to learn more.

Advantages Versus Sniffers

• AccuTrak® VPE is a much more accurate and reliable instrument for detecting single and multiple leaks.
• AccuTrak® VPE can detect any type of refrigerant gas including nitrogen.
• AccuTrak® VPE detects both vacuum and pressure leaks.
• AccuTrak® VPE is effective in gas saturated areas and under windy conditions.
• AccuTrak® VPE does not require the introduction of tracer gases into the system, which can be ozone depleting when vented, and can also be harmful to ones health.
• AccuTrak® VPE is battery powered for cordless operation

Advantages versus other Ultrasonic Leak Detectors

• AccuTrak® VPE is #1 in technology. We wrote the book on ultrasonic leak detection, our patented instruments lead the industry!
• AccuTrak® VPE is the original! it is not a copy.
• AccuTrak® VPE is the most durable unit available, with the best warranty. The face of the unit is sealed with no pin holes/speakers for foreign objects to enter.
• AccuTrak® VPE has more dynamic range, and wont overload in loud areas.
• AccuTrak® VPE gives true audio sound reproduction instead of the "beeps and squeals" of other instruments.

VPE-GN Standard Kit by Superior AccuTrak

The Patented Superior AccuTrak® VPE-GN Gooseneck represents state-of-the-art technology for pinpointing leaks in air conditioning and refrigeration systems. The new 9½ flexible Gooseneck provides better detection in hard-to-reach places, and is great for automotive applications too. AccuTrak® is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using the latest "heterodyning" technology it translates the sound to a lower frequency which your ear can interpret. The VPE-GN maintains the original sound characteristics making it possible to distinguish leaks from other competing background sounds. AccuTrak® is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy. Like all Superior AccuTrak® instruments, the VPE-GN easily detects leaks of ANY gas or refrigerant, compressed air, and even vacuum leaks.

Superior AccuTrak® advanced patented technology has never been so versatile! The AccuTrak® VPE-GN Standard Kit offers all the functionality and features of the VPE Basic Kit but with the sensor on the end of a 9-1/2 long flexible GooseNeck to get into all those hard-to-reach places. The VPE-GN Standard Kit is great for technicians in the Automotive industry, or any others who need to find tough leaks or other airborne ultrasound in tight spaces, behind obstructions, or inside an assembly. As with all AccuTrak® instruments, the VPE-GN finds leaks for any kind of gas or refrigerant without changing tips or components. Works equally well to find compressed air leaks, nitrogen leaks even vacuum leaks! AccuTrak® can find leaks as small as the equivalent of 1.5 oz per year of refrigerant, or can hear a 5 psi leak up to 30 feet away.

Kit Includes:

• VPE-GN Leak Detector
• Headset
• Battery
• Hard Case
• Waveguide

Applications:

• Leak Detection: Air, Vacuum, Refrigerants; ANY GAS!
• Steam Traps: Detect live steam loss in seconds!
• Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!
• Bearing Wear: Hear wear and lubrication problems before damage is done!

Features:

• Gooseneck Configuration: allows operator to get accurate readings in hard to reach places.
• Audio Output: 0 Hz to 4 kHz Natural Sound conversion allows you to Hear the Leak, and distinguish leaks from mechanical or other background ultrasound.
• Visual Output: 10 element bar graph provides quick and intuitive visual indication to presence of and relative strength of ultrasound.
• Adjustable Sensitivity: allows operator to quickly identify leaks from a distance, and then zero in on the exact location of the leak.

Capabilities:

• Capable of detecting a 5 psi leak out of a 0.005" (5/1000 inch) hole, 20 to 30 feet away depending on background noise.
• Easily detects any gas that generates ultrasonic sound during flow including vacuum leaks.
• Capable of detecting leaks equivalent to 1.5 oz/year of Refrigerant.
• Works equally well for compressed Air or Nitrogen.
• Not affected by wind or high concentrations of leaked gas or refrigerant.

Kits for Every Application

Whether you only need the basic functions of the VPE-GN or you plan to take full advantage of the instrument's diverse capabilities, we have a kit that will meet your needs! Click the "Find Your Kit" tab above to learn more.

Advantages Versus Sniffers

• AccuTrak® VPE is a much more accurate and reliable instrument for detecting single and multiple leaks.
• AccuTrak® VPE can detect any type of refrigerant gas including nitrogen.
• AccuTrak® VPE detects both vacuum and pressure leaks.
• AccuTrak® VPE is effective in gas saturated areas and under windy conditions.
• AccuTrak® VPE does not require the introduction of tracer gases into the system, which can be ozone depleting when vented, and can also be harmful to ones health.
• AccuTrak® VPE is battery powered for cordless operation

Advantages versus other Ultrasonic Leak Detectors

• AccuTrak® VPE is #1 in technology. We wrote the book on ultrasonic leak detection, our patented instruments lead the industry!
• AccuTrak® VPE is the original! it is not a copy.
• AccuTrak® VPE is the most durable unit available, with the best warranty. The face of the unit is sealed with no pin holes/speakers for foreign objects to enter.
• AccuTrak® VPE has more dynamic range, and wont overload in loud areas.
• AccuTrak® VPE gives true audio sound reproduction instead of the "beeps and squeals" of other instruments.

VPE Professional Kit by Superior AccuTrak

The Patented Superior AccuTrak® VPE represents state-of-the-art technology for pinpointing leaks is air conditioning and refrigeration systems. AccuTrak® is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using a technology called "heterodyning" it translates the sound to a lower frequency which your ear can interpret. AccuTrak maintains the original sound characteristics making it possible to distinguish leaks from other competing background sounds. AccuTrak is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy.

The AccuTrak® VPE Professional Kit is designed for technicians who work in noisy places, or who regularly need to find smaller leaks. The VPE Professional Kit includes all the great features of our VPE Standard Kit upgraded with professional Noise Cancelling Headphones and a larger case to keep everything together. These high quality headphones eliminate all background noise, allowing a technician to effectively find the smallest leaks even in very loud environments. You can choose the standard style professional headphones, or the hardhat compatible version same price!

Kit Includes

• VPE Leak Detector
• Battery
• Touch Probe
• Waveguide
• Noise Blocking Headphones
• Large Carry Case

Applications:

• Leak Detection: Air, Vacuum, Refrigerants; ANY GAS!
• Steam Traps: Detect live steam loss in seconds!
• Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!
• Bearing Wear: Hear wear and lubrication problems before damage is done!

Features:

• Audio Output: 0 Hz to 4 kHz Natural Sound conversion allows you to Hear the Leak, and distinguish leaks from mechanical or other background ultrasound.
• Visual Output: 10 element bar graph provides quick and intuitive visual indication to presence of and relative strength of ultrasound.
• Adjustable Sensitivity: allows operator to quickly identify leaks from a distance, and then zero in on the exact location of the leak.

Capabilities:

• Capable of detecting a 5 psi leak out of a 0.005" (5/1000 inch) hole, 20 to 30 feet away depending on background noise.
• Easily detects any gas that generates ultrasonic sound during flow including vacuum leaks.
• Capable of detecting leaks equivalent to 1.5 oz/year of Refrigerant.
• Works equally well for compressed Air or Nitrogen.
• Not affected by wind or high concentrations of leaked gas or refrigerant.

Kits for Every Application

Whether you only need the basic functions of the VPE or you plan to take full advantage of the instrument's diverse capabilities, we have a kit that will meet your needs! Click the "Find Your Kit" tab above to learn more.

Advantages Versus Sniffers

• AccuTrak® VPE is a much more accurate and reliable instrument for detecting single and multiple leaks.
• AccuTrak® VPE can detect any type of refrigerant gas including nitrogen.
• AccuTrak® VPE detects both vacuum and pressure leaks.
• AccuTrak® VPE is effective in gas saturated areas and under windy conditions.
• AccuTrak® VPE does not require the introduction of tracer gases into the system, which can be ozone depleting when vented, and can also be harmful to ones health.
• AccuTrak® VPE is battery powered for cordless operation

Advantages versus other Ultrasonic Leak Detectors

• AccuTrak® VPE is #1 in technology. We wrote the book on ultrasonic leak detection, our patented instruments lead the industry!
• AccuTrak® VPE is the original! it is not a copy.
• AccuTrak® VPE is the most durable unit available, with the best warranty. The face of the unit is sealed with no pin holes/speakers for foreign objects to enter.
• AccuTrak® VPE has more dynamic range, and wont overload in loud areas.
• AccuTrak® VPE gives true audio sound reproduction instead of the "beeps and squeals" of other instruments.

GD-K8A-NO2 GD-K8A Diffusion Sensor/Transmitter, Nitrogen Dioxide (NO2) 0 - 15 PPM by RKI Instruments

The GD-K8A is a diffusion style toxic gas detection transmitter ideally suited to meet your toxic gas detection needs. You can choose from a wide variety of toxic sensors to install in this model. The GD-K8A is an ideal solution for many toxic gas monitoring applications. The low profile design is only 1.5 inches thick and is easy to install. The hinged housing makes it easy to maintain. This transmitter can be installed with any RKI controller, or integrated to existing PLC or DCS system via 4-20mA output (24VDC two-wire, loop powered).

The sensors for the GD-K8A are aged and tested over a one to three month period, typically resulting in a three to five year life span, providing a lower cost of ownership for your gas detection system. The sensors are robust electrochemical type that feature higher sensitivity and selectivity. Fast sensor response time and excellent stability make these sensors the most reliable and longest-life electrochemical sensors available today.

At the heart of any gas detector is the sensor. With over 65 years of sensor technology experience, RKI has the knowledge and capability to provide the most advanced detection techniques and manufacture the most stable and long lasting sensors in the world. As a result the GD-K8A is one of the most stable and long lasting toxic transmitters on the market.

Features

• Diffusion style head
• Low profile design
• Quick response sensors
• Many toxic sensors to choose from
• 3 to 5 year typical sensor life
• Easy maintenance
• Selective for target gas
• Low cost of ownership

Applications

• Semiconductor manufacturing
• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Gas, telephone, & electric utilities
• Steel
• Automotive
• Refrigeration
• Food Storage
• Power Plants
• General Leak Detection

*Please note we can only ship RKI products to customers within the United States

VPE-GN Professional Kit by Superior AccuTrak

The Patented Superior AccuTrak® VPE-GN Gooseneck represents state-of-the-art technology for pinpointing leaks in air conditioning and refrigeration systems. The new 9½ flexible Gooseneck provides better detection in hard-to-reach places, and is great for automotive applications too. AccuTrak® is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using the latest "heterodyning" technology it translates the sound to a lower frequency which your ear can interpret. The VPE-GN maintains the original sound characteristics making it possible to distinguish leaks from other competing background sounds. AccuTrak® is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy. Like all Superior AccuTrak® instruments, the VPE-GN easily detects leaks of ANY gas or refrigerant, compressed air, and even vacuum leaks.

The AccuTrak® VPE-GN Professional Kit is designed for technicians who work in noisy places, or who regularly need to find smaller leaks. With the sensor at the end of the 9-1/2 long flexible GooseNeck you get full sensitivity all the way into those hard-to-reach places. The VPE-GN Professional Kit includes all the great features of our VPE-GN Standard Kit upgraded with professional Noise Cancelling Headphones and a larger case to keep everything together. These high quality headphones eliminate all background noise, allowing a technician to effectively find the smallest leaks even in very loud environments. You can choose the standard style professional headphones, or the hardhat compatible version same price!

Kit Includes:

• VPE-GN Leak Detector
• Battery
• Waveguide
• Noise Blocking Headphones
• Large Carry Case

Applications:

• Leak Detection: Air, Vacuum, Refrigerants; ANY GAS!
• Steam Traps: Detect live steam loss in seconds!
• Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!
• Bearing Wear: Hear wear and lubrication problems before damage is done!

Features:

• Gooseneck Configuration: allows operator to get accurate readings in hard to reach places.
• Audio Output: 0 Hz to 4 kHz Natural Sound conversion allows you to Hear the Leak, and distinguish leaks from mechanical or other background ultrasound.
• Visual Output: 10 element bar graph provides quick and intuitive visual indication to presence of and relative strength of ultrasound.
• Adjustable Sensitivity: allows operator to quickly identify leaks from a distance, and then zero in on the exact location of the leak.

Capabilities:

• Capable of detecting a 5 psi leak out of a 0.005" (5/1000 inch) hole, 20 to 30 feet away depending on background noise.
• Easily detects any gas that generates ultrasonic sound during flow including vacuum leaks.
• Capable of detecting leaks equivalent to 1.5 oz/year of Refrigerant.
• Works equally well for compressed Air or Nitrogen.
• Not affected by wind or high concentrations of leaked gas or refrigerant.

Kits for Every Application

Whether you only need the basic functions of the VPE-GN or you plan to take full advantage of the instrument's diverse capabilities, we have a kit that will meet your needs! Click the "Find Your Kit" tab above to learn more.

Advantages Versus Sniffers

• AccuTrak® VPE is a much more accurate and reliable instrument for detecting single and multiple leaks.
• AccuTrak® VPE can detect any type of refrigerant gas including nitrogen.
• AccuTrak® VPE detects both vacuum and pressure leaks.
• AccuTrak® VPE is effective in gas saturated areas and under windy conditions.
• AccuTrak® VPE does not require the introduction of tracer gases into the system, which can be ozone depleting when vented, and can also be harmful to ones health.
• AccuTrak® VPE is battery powered for cordless operation

Advantages versus other Ultrasonic Leak Detectors

• AccuTrak® VPE is #1 in technology. We wrote the book on ultrasonic leak detection, our patented instruments lead the industry!
• AccuTrak® VPE is the original! it is not a copy.
• AccuTrak® VPE is the most durable unit available, with the best warranty. The face of the unit is sealed with no pin holes/speakers for foreign objects to enter.
• AccuTrak® VPE has more dynamic range, and wont overload in loud areas.
• AccuTrak® VPE gives true audio sound reproduction instead of the "beeps and squeals" of other instruments.

GD-K8A4X-NO2 GD-K8A Diffusion Sensor/Transmitter, Nitrogen Dioxide (NO2) 0 - 15 PPM in NEMA 4X Housing by RKI Instruments

The GD-K8A is a diffusion style toxic gas detection transmitter ideally suited to meet your toxic gas detection needs. You can choose from a wide variety of toxic sensors to install in this model. The GD-K8A is an ideal solution for many toxic gas monitoring applications. The low profile design is only 1.5 inches thick and is easy to install. The hinged housing makes it easy to maintain. This transmitter can be installed with any RKI controller, or integrated to existing PLC or DCS system via 4-20mA output (24VDC two-wire, loop powered).

The sensors for the GD-K8A are aged and tested over a one to three month period, typically resulting in a three to five year life span, providing a lower cost of ownership for your gas detection system. The sensors are robust electrochemical type that feature higher sensitivity and selectivity. Fast sensor response time and excellent stability make these sensors the most reliable and longest-life electrochemical sensors available today.

At the heart of any gas detector is the sensor. With over 65 years of sensor technology experience, RKI has the knowledge and capability to provide the most advanced detection techniques and manufacture the most stable and long lasting sensors in the world. As a result the GD-K8A is one of the most stable and long lasting toxic transmitters on the market.

Features

• Diffusion style head
• Low profile design
• Quick response sensors
• Many toxic sensors to choose from
• 3 to 5 year typical sensor life
• Easy maintenance
• Selective for target gas
• Low cost of ownership

Applications

• Semiconductor manufacturing
• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Gas, telephone, & electric utilities
• Steel
• Automotive
• Refrigeration
• Food Storage
• Power Plants
• General Leak Detection

*Please note we can only ship RKI products to customers within the United States

VPE Ultrasonic Leak Detector by Superior AccuTrak

The Patented Superior AccuTrak® VPE represents state-of-the-art technology for pinpointing leaks is air conditioning and refrigeration systems. AccuTrak® is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using a technology called "heterodyning" it translates the sound to a lower frequency which your ear can interpret. AccuTrak maintains the original sound characteristics making it possible to distinguish leaks from other competing background sounds. AccuTrak is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy.

VPE Basic Kit

Superior AccuTrak® advanced patented technology has never been so affordable! The AccuTrak® VPE Basic Kit is for technicians who require only the essentials to detect leaks using airborne ultrasound. As with all AccuTrak® instruments, the VPE finds leaks for any kind of gas or refrigerant without changing tips or components. Works equally well to find compressed air leaks, nitrogen leaks even vacuum leaks! AccuTrak® can find leaks as small as the equivalent of 1.5 oz per year of refrigerant, or can hear a 5 psi leak up to 30 feet away.

Kit Includes:

• VPE Leak Detector
• Headset
• Battery
• Hard Case

VPE Standard Kit

The AccuTrak® VPE Standard Kit offers literally twice the functionality of the Basic Kit with the addition of the AccuTrak® Touch Probe and Waveguide. Utilizing the Touch Probe, the VPE can troubleshoot thermal expansion valves in less than 5 minutes, and find faulty steam traps in just seconds! The Touch Probe can also be used to detect worn bearings and faulty valves. With the Waveguide attachment a technician can gain better access to hard-to-reach places and better determine the location of leaks that would otherwise be inaccessible. This is our most popular kit for a reason!

Kit Includes:

• VPE Leak Detector
• Headset
• Battery
• Hard Case
• Touch Probe
• Waveguide

VPE Professional Kit

The AccuTrak® VPE Professional Kit is designed for technicians who work in noisy places, or who regularly need to find smaller leaks. The VPE Professional Kit includes all the great features of our VPE Standard Kit upgraded with professional Noise Cancelling Headphones and a larger case to keep everything together. These high quality headphones eliminate all background noise, allowing a technician to effectively find the smallest leaks even in very loud environments. You can choose the standard style professional headphones, or the hardhat compatible version same price!

Kit Includes:

• VPE Leak Detector
• Battery
• Touch Probe
• Waveguide
• Noise Blocking Headphones
• Large Carry Case

VPE Plus Kit

The AccuTrak® VPE Plus Kit is designed for technicians looking to take full advantage of all the VPE s many capabilities. The VPE Plus Kit includes everything in our Standard Kit PLUS our powerful Burst Tone Sound Generator! The sophisticated Burst Tone can artificially pressurize any vessel or space with ultrasonic sound, allowing a technician to quickly scan for leaks even where there is no actual pressure differential! The VPE Plus Kit is ideal for technicians who test refrigerator door and window seals, or any other non-pressurized seal or vessel. The VPE Plus Kit is also great for Energy Audits and Surveys, and finding air leaks and sources of air infiltration in homes, aircraft, ships, and buildings.

Kit Includes:

• VPE Leak Detector
• Headset
• Battery
• Hard Case
• Touch Probe
• Waveguide
• Sound Generator

VPE Pro-Plus Kit

The AccuTrak® VPE Pro-Plus Kit is our most comprehensive VPE Kit, for the serious technician who needs the maximum capability from an ultrasonic instrument. The VPE Pro-Plus Kit includes the upgraded professional Noise Cancelling Headphones PLUS the powerful Burst Tone Sound Generator, in the larger case to keep everything together. The VPE Pro-Plus Kit offers unrivaled functionality and versatility for a fraction of the cost of any competitive system with similar performance. Find any kind of leak, troubleshoot internal mechanical problems, find bad gaskets and door seals and do it all well, in any environment! If you do a variety of work, and need a cost effective professional kit that can do it all, the Superior AccuTrak® VPE Pro-Plus Kit is for you.

Kit Includes:

• VPE Leak Detector
• Battery
• Touch Probe
• Waveguide
• Sound Generator
• Noise Blocking Headphones
• Large Carry Case

Applications:

• Leak Detection: Air, Vacuum, Refrigerants; ANY GAS!
• Steam Traps: Detect live steam loss in seconds!
• Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!
• Bearing Wear: Hear wear and lubrication problems before damage is done!

Features:

• Audio Output: 0 Hz to 4 kHz Natural Sound conversion allows you to Hear the Leak, and distinguish leaks from mechanical or other background ultrasound.
• Visual Output: 10 element bar graph provides quick and intuitive visual indication to presence of and relative strength of ultrasound.
• Adjustable Sensitivity: allows operator to quickly identify leaks from a distance, and then zero in on the exact location of the leak.

Capabilities:

• Capable of detecting a 5 psi leak out of a 0.005" (5/1000 inch) hole, 20 to 30 feet away depending on background noise.
• Easily detects any gas that generates ultrasonic sound during flow including vacuum leaks.
• Capable of detecting leaks equivalent to 1.5 oz/year of Refrigerant.
• Works equally well for compressed Air or Nitrogen.
• Not affected by wind or high concentrations of leaked gas or refrigerant.

Kits for Every Application

Whether you only need the basic functions of the VPE or you plan to take full advantage of the instrument's diverse capabilities, we have a kit that will meet your needs! Click the "Find Your Kit" tab above to learn more.

Advantages Versus Sniffers

• AccuTrak® VPE is a much more accurate and reliable instrument for detecting single and multiple leaks.
• AccuTrak® VPE can detect any type of refrigerant gas including nitrogen.
• AccuTrak® VPE detects both vacuum and pressure leaks.
• AccuTrak® VPE is effective in gas saturated areas and under windy conditions.
• AccuTrak® VPE does not require the introduction of tracer gases into the system, which can be ozone depleting when vented, and can also be harmful to ones health.
• AccuTrak® VPE is battery powered for cordless operation

Advantages versus other Ultrasonic Leak Detectors

• AccuTrak® VPE is #1 in technology. We wrote the book on ultrasonic leak detection, our patented instruments lead the industry!
• AccuTrak® VPE is the original! it is not a copy.
• AccuTrak® VPE is the most durable unit available, with the best warranty. The face of the unit is sealed with no pin holes/speakers for foreign objects to enter.
• AccuTrak® VPE has more dynamic range, and wont overload in loud areas.
• AccuTrak® VPE gives true audio sound reproduction instead of the "beeps and squeals" of other instruments.

VPE Plus Kit by Superior AccuTrak

The Patented Superior AccuTrak® VPE represents state-of-the-art technology for pinpointing leaks is air conditioning and refrigeration systems. AccuTrak® is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using a technology called "heterodyning" it translates the sound to a lower frequency which your ear can interpret. AccuTrak maintains the original sound characteristics making it possible to distinguish leaks from other competing background sounds. AccuTrak is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy.

The AccuTrak® VPE Plus Kit is designed for technicians looking to take full advantage of all the VPE s many capabilities. The VPE Plus Kit includes everything in our Standard Kit PLUS our powerful Burst Tone Sound Generator! The sophisticated Burst Tone can artificially pressurize any vessel or space with ultrasonic sound, allowing a technician to quickly scan for leaks even where there is no actual pressure differential! The VPE Plus Kit is ideal for technicians who test refrigerator door and window seals, or any other non-pressurized seal or vessel. The VPE Plus Kit is also great for Energy Audits and Surveys, and finding air leaks and sources of air infiltration in homes, aircraft, ships, and buildings.

Kit Includes

• VPE Leak Detector
• Headset
• Battery
• Hard Case
• Touch Probe
• Waveguide
• Sound Generator

Applications:

• Leak Detection: Air, Vacuum, Refrigerants; ANY GAS!
• Steam Traps: Detect live steam loss in seconds!
• Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!
• Bearing Wear: Hear wear and lubrication problems before damage is done!

Features:

• Audio Output: 0 Hz to 4 kHz Natural Sound conversion allows you to Hear the Leak, and distinguish leaks from mechanical or other background ultrasound.
• Visual Output: 10 element bar graph provides quick and intuitive visual indication to presence of and relative strength of ultrasound.
• Adjustable Sensitivity: allows operator to quickly identify leaks from a distance, and then zero in on the exact location of the leak.

Capabilities:

• Capable of detecting a 5 psi leak out of a 0.005" (5/1000 inch) hole, 20 to 30 feet away depending on background noise.
• Easily detects any gas that generates ultrasonic sound during flow including vacuum leaks.
• Capable of detecting leaks equivalent to 1.5 oz/year of Refrigerant.
• Works equally well for compressed Air or Nitrogen.
• Not affected by wind or high concentrations of leaked gas or refrigerant.

Kits for Every Application

Whether you only need the basic functions of the VPE or you plan to take full advantage of the instrument's diverse capabilities, we have a kit that will meet your needs! Click the "Find Your Kit" tab above to learn more.

Advantages Versus Sniffers

• AccuTrak® VPE is a much more accurate and reliable instrument for detecting single and multiple leaks.
• AccuTrak® VPE can detect any type of refrigerant gas including nitrogen.
• AccuTrak® VPE detects both vacuum and pressure leaks.
• AccuTrak® VPE is effective in gas saturated areas and under windy conditions.
• AccuTrak® VPE does not require the introduction of tracer gases into the system, which can be ozone depleting when vented, and can also be harmful to ones health.
• AccuTrak® VPE is battery powered for cordless operation

Advantages versus other Ultrasonic Leak Detectors

• AccuTrak® VPE is #1 in technology. We wrote the book on ultrasonic leak detection, our patented instruments lead the industry!
• AccuTrak® VPE is the original! it is not a copy.
• AccuTrak® VPE is the most durable unit available, with the best warranty. The face of the unit is sealed with no pin holes/speakers for foreign objects to enter.
• AccuTrak® VPE has more dynamic range, and wont overload in loud areas.
• AccuTrak® VPE gives true audio sound reproduction instead of the "beeps and squeals" of other instruments.

2811-724-001 EC 28 Gas Transmitter with Sensor, Nitrogen Oxide (NO), No Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

SPXCDULNFX UL/CSA/INMETRO approved SP XCD Flammable CAT 0-100%LEL (20 to 100%LEL, 10%LEL) with LM25, 3/4 NPT Entry by Honeywell Analytics

Honeywell can trace its company roots back nearly 125 years. What started off as a company dedicated to heating technologies has blossomed into an enterprise dedicated to a variety ofsafety, security, and energy solutions. By integrating the most advanced technologies with intuitive designs, Honeywell has established itself as an industry leader in workplace safety products and gas detection solutions. The company s commitment to advancement and growth help pave the way for innovation and creativity in design. The Sensepoint XCD detection system is the epitome of product advancement. Building on 125 years of industry experience, Honeywell has introduced a comprehensive monitoring system that is reliable, dependable, and state of the art.

Sensepoint XCD

With the Sensepoint XCD detection system, Honeywell provides easy to use, low maintenance sensory devices for monitoring explosive atmospheric conditions in a variety of industrial settings. The Sensepoint XCD system monitors for explosive oxygen gas, toxic gas, and flammable conditions and constantly relays status through transmitters utilizing a simply traffic light LCD system which can be easily seen and understood from a distance.

Superb Versatility

The Sensepoint XCD system provides a catch all-detection system which has worldwide industry approvals and is compliant with all relevant standards. Suited for indoor use as well as the harshest outdoor conditions, the Sensepoint XCD systemis a versatile product for use in any potentially dangerous industrial atmosphere. The unit is available in both stainless steel and aluminum housing options, both of which are resistant to explosions. The XCD transmitter systems are for three separate environmental conditions (flammable, toxic, and oxygen). Each transmitter has a variety of sensors available for use. Each transmitter will automatically recognize the sensor within its category. The plug-in design of the sensors allows users to simply plug the sensor into the transmitter. The transmitter will automatically adjust and configure for the appropriate sensor settings.

Simplicity in Design

The Sensepoint XCD system is easy to install with a simple plug-in design, a built-in mounting system, and comes equipped with versatile wiring receptions to limit compatibility issues for the end user. Once installed, the system utilizes a traffic light type display of green for normal, yellow for warning, and red to alert an atmospheric issue. The maintenance of the system is just as user-friendly with routine maintenance easy and ergonomic enough to be done by one person. The system is also simple enough that it can be used and maintained with little training.

Cost Savings

The Sensepoint XCD system provides a business with cost reductions in both hardware and staffing. The versatile usage and low maintenance of the system reduces the resources needed to monitor conditions and allows personnel to focus on their tasks at hand. The system also provides personnel, and any other parties in the area, peace of mind that their conditions are being constantly monitored for danger and relayed in a way that anyone can detect and bring awareness to dangerous conditions.