Amplifier

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

MA906BR/1 Amplified pH Electrode - pH/Temp Combination Electrode with BNC & RCA Connectors and 1 meter cable for MW105 & MW106 Portable Meter only by Milwaukee

The Milwaukee MA906BR/1 Amplified pH/mV/Temp replacement probe for Milwaukee MW105 pH/Temp and MW106 pH/mV/temp meters. The MA906BR/1 has a rugged body (Epoxy) designed to take hits, comes with a 1 meter (3') cable and a BNC connector (meter(s) sold separately). The MA906BR/1 will read mV of pH. OPR probes for MW105 or MW106 sold separately.

The probe connects quickly and tightly with a BNC connector. No worries of slipping off.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

79-1017-07 Model 1017 Explosion Proof Combustible Sample Draw, 0-100 %LEL with IR HC Sensor, RKI type by RKI Instruments

The Model 1017 series is a compact sample draw direct connect LEL sensor assembly with a built-in pump that accepts a 24VDC input. This unit features a watertight cast aluminum alloy housing which is rated as explosion proof for Class I, Division I, Groups B, C, & D. The Model 1017 has a detection range of 0-100% LEL and can draw a sample from 100 feet away.

The Model 1017 can interface to any RKI Beacon 110, 200, 410, or M2 controllers, Beacon 800, Riken Kieki, or third party control system utilizing optional amplifier with 4-20 mA feedback signal. The stainless steel inlet and exhaust fittings on the bottom of the housing allow the gas sample to enter and exit. This is a very cost effective way of monitoring LEL with a sample draw direct connect sensor.

Features

• Monitors 0-100% LEL
• Sample-draw with long life internal pump
• Cast aluminum alloy housing
• Stainless steel inlet and outlet fittings with flame arrestors
• Housing and flame arrestors CSA and UL classified for use in hazardous locations Class I, Division I, Groups B, C, & D.
• Also available for oxygen monitoring, 0-25% volume
• Operates on 24VDC input

Industry Applications

• Gas Fired Electrical Generation Plants
• Refineries
• Water & Wastewater Treatment Plants
• Manufacturing Facilities

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

MA852 pH/EC/TDS/°C Amplified Probe With 1 Meter Cable for use with MW805/MW806 by Milwaukee

The Milwaukee MA852D/1 Pre-Amplified replacement pH/EC/TDS/Temp Probe for MW805 & MW806 portable pH/EC/TDS/Temp meters. The MA852D/1 has a rugged body (ABS) designed to take hits, comes with a 1 meter (3') cable, DIN connector and can withstand up to 1 bar of pressure (meter(s) sold separately).

The probe connects quickly and tightly with a screw on DIN. No worries of slipping off.

65-2424RK M-Series Hydrogen Sulfide (H2S) Sensor/Transmitter in Plastic Enclosure (Not Explosion Proof) by RKI Instruments

Some gas monitoring requirements are basic but important. The RKI M-Series transmitter is a highly reliable and very cost-effective 4-20 mA transmitter for the detection of carbon monoxide and hydrogen sulfide. This transmitter operates from a 24 VDC (11 VDC to 30 VDC) power source and provides a 4 20 mA output signal, which can be connected to a wide variety of RKI or third party controllers. The M-Series transmitters are built for use in either indoor or semienclosed areas.

The electronics are protected inside a plastic enclosure to avoid damage from mechanical abuse, water, dust or corrosion. Sensors for the M-Series have a long life-span that typically last two to three years.

Field calibrations are very basic and can be completed by a single person. The zero and calibration functions for the MSeries are performed by simply adjusting potentiometers on the amplifier board. The amplifier board is equipped with easily accessible test jacks for the connection of a voltmeter. The voltmeter is used to view sensor response while the calibration gas is being applied and the potentiometers are adjusted with a screwdriver.

Features

• Water/dust resistant housing
• Available for CO and H2S
• Long life sensors (2 + years typical)
• Competitively priced
• Compact design

Applications

• Water & wastewater treatment plants
• Pulp & paper mills
• Gas, telephone & electric utilities
• Parking garages
• Manufacturing facilities
• Loading docks

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

79-1017-03M2AXL Model 1017 explosion proof combustible sample draw, 0-100 %LEL with NC-6245 sensor & M2A-XL Display, RKI type by RKI Instruments

The Model 1017 series is a compact sample draw direct connect LEL sensor assembly with a built-in pump that accepts a 24VDC input. This unit features a watertight cast aluminum alloy housing which is rated as explosion proof for Class I, Division I, Groups B, C, & D. The Model 1017 has a detection range of 0-100% LEL and can draw a sample from 100 feet away.

The Model 1017 can interface to any RKI Beacon 110, 200, 410, or M2 controllers, Beacon 800, Riken Kieki, or third party control system utilizing optional amplifier with 4-20 mA feedback signal. The stainless steel inlet and exhaust fittings on the bottom of the housing allow the gas sample to enter and exit. This is a very cost effective way of monitoring LEL with a sample draw direct connect sensor.

Features

• Monitors 0-100% LEL
• Sample-draw with long life internal pump
• Cast aluminum alloy housing
• Stainless steel inlet and outlet fittings with flame arrestors
• Housing and flame arrestors CSA and UL classified for use in hazardous locations Class I, Division I, Groups B, C, & D.
• Also available for oxygen monitoring, 0-25% volume
• Operates on 24VDC input

Industry Applications

• Gas Fired Electrical Generation Plants
• Refineries
• Water & Wastewater Treatment Plants
• Manufacturing Facilities

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States