Methane Detector

*Please note we can only ship RKI products to customers within the United States

IRMX-AA-AC-011-AB-01 IRMAX 0-100% UEG Methan Detector, M20 Kabeleinführung, ATEX-zugelassen, 4-20mA Stromquelle, festeAnzeige by Crowcon

IRmax is a compact, low power and highly rugged infrared (IR) gas detector, that delivers rapid, fail-safe detection of methane, butane, propane and many other hydrocarbon gases and vapours. The IRmax infrared gas detection system offers the choice of a detector only, a local gas/status display, a remote gas/status display or non-intrusive calibration via an I.S. calibration tool or hand-held HART communicator.

Dependability in all conditions is what makes the IRmax stand out from the crowd, with the reliability of the IRmax hydrocarbon detector proven in hot, cold, wet and saline environments.

IRmax's unique Stay-ClIR optical components are treated with a highly durable coating that completely prevents faults due to condensation, making it ideal for offshore use.

Certified for use in Zone 1 & 2 and EMC compliant*, the IRmax is compatible with virtually any control system, requiring minimal routine maintenance helping keep costs at a minimum. The IRmax also contains no components for artificially heating optical surfaces, meaning power consumption is dramatically reduced, requiring only 1W of power.

The remote display can be mounted up to 30 metres from the IRmax and test gas can be applied without requiring direct access to the detector. It can also be wall mounted, fitted to a 50mm (2 inch) pipe or connected to an auxiliary junction box, making it a reliable and versatile choice for hydrocarbon gas detection.

Ultima X5000 Gas Detector 5% Methane by MSA

The ULTIMA® X5000 Gas Monitor is the future of gas detection for oxygen, toxic and combustible gases. MSA XCell® gas sensors with TruCal® technology offer calibration cycles up to 24 months (local calibration respected). The gas transmitter's advanced, multi-lingual OLED display is easy to read and the unique touch-screen interface makes it simple to navigate.

FEATURES:

• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway
• Three-year warranty on XCell sensors
• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• An industry first, Diffusion Supervision warns if sensor inlet becomes blocked and unable to detect gas
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway

10189546 Altair 5X Mining Multigas Detector by MSA

In the face of potentially dangerous situations, workers need to feel certain that they are protected by the very best safety products on the market. MSA, the Safety Company, provides workers with the security they need to get the job done safely. The Altair 5X Multigas Detector is an industry leader in gas detection and safety features. With high standards of safety and advanced technology to ensure the reliability and longevity of the unit, workers can be certain that the unit represents the most advanced technology in gas detection.

Altair 5X Multigas Detector features

Exclusive features such as the MotionAlert and Instant Alert provide a sense of security when in potentially dangerous settings. When a user is motionless or disabled, MotionAlert activates and transmits an alert to others with the disabled user s location. The Instant Alert feature allows users to manually transmit an alert to others warning of a potentially hazardous situation.

The Altair 5X Multigas detector features an unparalleled flexibility and versatility designed to meet the unique needs of its many users. From high-resolution color displays or monochromatic LED screens to its 18 different language options, the detectors versatility is unmatched by competitors. Users can also find a wide variety of applications, kits, and accessories to better customize the unit.

Cell Sensor technology

Durability

Specifications

With an audible alarm of greater than 95 decibels, a visual alarm of 2 LED lights, and a standard vibrating alarm, the unit is well designed to alert users of potential gases. The devices can also effectively store up to 1000 events.

Users can also minimize risk of user errors by participating in MSA s online training and web content. This includes new Altair 5 X Multigas Detector simulation tutorials designed to simulate instrument operation.

10189797 Altair 5X Mining Multigas Detector by MSA

In the face of potentially dangerous situations, workers need to feel certain that they are protected by the very best safety products on the market. MSA, the Safety Company, provides workers with the security they need to get the job done safely. The Altair 5X Multigas Detector is an industry leader in gas detection and safety features. With high standards of safety and advanced technology to ensure the reliability and longevity of the unit, workers can be certain that the unit represents the most advanced technology in gas detection.

Altair 5X Multigas Detector features

Exclusive features such as the MotionAlert and Instant Alert provide a sense of security when in potentially dangerous settings. When a user is motionless or disabled, MotionAlert activates and transmits an alert to others with the disabled user s location. The Instant Alert feature allows users to manually transmit an alert to others warning of a potentially hazardous situation.

The Altair 5X Multigas detector features an unparalleled flexibility and versatility designed to meet the unique needs of its many users. From high-resolution color displays or monochromatic LED screens to its 18 different language options, the detectors versatility is unmatched by competitors. Users can also find a wide variety of applications, kits, and accessories to better customize the unit.

Cell Sensor technology

Durability

Specifications

With an audible alarm of greater than 95 decibels, a visual alarm of 2 LED lights, and a standard vibrating alarm, the unit is well designed to alert users of potential gases. The devices can also effectively store up to 1000 events.

Users can also minimize risk of user errors by participating in MSA s online training and web content. This includes new Altair 5 X Multigas Detector simulation tutorials designed to simulate instrument operation.

10190086 Altair 5X Mining Multigas Detector by MSA

In the face of potentially dangerous situations, workers need to feel certain that they are protected by the very best safety products on the market. MSA, the Safety Company, provides workers with the security they need to get the job done safely. The Altair 5X Multigas Detector is an industry leader in gas detection and safety features. With high standards of safety and advanced technology to ensure the reliability and longevity of the unit, workers can be certain that the unit represents the most advanced technology in gas detection.

Altair 5X Multigas Detector features

Exclusive features such as the MotionAlert and Instant Alert provide a sense of security when in potentially dangerous settings. When a user is motionless or disabled, MotionAlert activates and transmits an alert to others with the disabled user s location. The Instant Alert feature allows users to manually transmit an alert to others warning of a potentially hazardous situation.

The Altair 5X Multigas detector features an unparalleled flexibility and versatility designed to meet the unique needs of its many users. From high-resolution color displays or monochromatic LED screens to its 18 different language options, the detectors versatility is unmatched by competitors. Users can also find a wide variety of applications, kits, and accessories to better customize the unit.

Cell Sensor technology

Durability

Specifications

With an audible alarm of greater than 95 decibels, a visual alarm of 2 LED lights, and a standard vibrating alarm, the unit is well designed to alert users of potential gases. The devices can also effectively store up to 1000 events.

Users can also minimize risk of user errors by participating in MSA s online training and web content. This includes new Altair 5 X Multigas Detector simulation tutorials designed to simulate instrument operation.

*Please note we can only ship RKI products to customers within the United States

SAMN24B Safe Guardian Methane (CH4): Gas detector with pellistor sensor for CH4; measuring scale: 0..50% LEL by Seitron Americas

The Safe Guardian transmitter is designed to detect concentrations of toxic and explosive gases, with a special focus on simplifying installation and maintenance operations.

• Detected gases: CO, O2, CH4
• Protection degree IP65.
• Three relays to serve as fault detector, low and high-level alarm triggers
• Analog output: 4-20mA, 0-5V, 0-10V, 1-5V, 2-10V – configurable via App.
• Up to 32 devices connectable via Modbus® RTU RS485 interface
• Calibration and bump test with Seitron Guard app.
• Built-in audible and visual alarms for an immediate danger warning

10190085 Altair 5X Mining Multigas Detector by MSA

In the face of potentially dangerous situations, workers need to feel certain that they are protected by the very best safety products on the market. MSA, the Safety Company, provides workers with the security they need to get the job done safely. The Altair 5X Multigas Detector is an industry leader in gas detection and safety features. With high standards of safety and advanced technology to ensure the reliability and longevity of the unit, workers can be certain that the unit represents the most advanced technology in gas detection.

Altair 5X Multigas Detector features

Exclusive features such as the MotionAlert and Instant Alert provide a sense of security when in potentially dangerous settings. When a user is motionless or disabled, MotionAlert activates and transmits an alert to others with the disabled user s location. The Instant Alert feature allows users to manually transmit an alert to others warning of a potentially hazardous situation.

The Altair 5X Multigas detector features an unparalleled flexibility and versatility designed to meet the unique needs of its many users. From high-resolution color displays or monochromatic LED screens to its 18 different language options, the detectors versatility is unmatched by competitors. Users can also find a wide variety of applications, kits, and accessories to better customize the unit.

Cell Sensor technology

Durability

Specifications

With an audible alarm of greater than 95 decibels, a visual alarm of 2 LED lights, and a standard vibrating alarm, the unit is well designed to alert users of potential gases. The devices can also effectively store up to 1000 events.

Users can also minimize risk of user errors by participating in MSA s online training and web content. This includes new Altair 5 X Multigas Detector simulation tutorials designed to simulate instrument operation.

10192837 Altair 5X Mining Multigas Detector by MSA

In the face of potentially dangerous situations, workers need to feel certain that they are protected by the very best safety products on the market. MSA, the Safety Company, provides workers with the security they need to get the job done safely. The Altair 5X Multigas Detector is an industry leader in gas detection and safety features. With high standards of safety and advanced technology to ensure the reliability and longevity of the unit, workers can be certain that the unit represents the most advanced technology in gas detection.

Altair 5X Multigas Detector features

Exclusive features such as the MotionAlert and Instant Alert provide a sense of security when in potentially dangerous settings. When a user is motionless or disabled, MotionAlert activates and transmits an alert to others with the disabled user s location. The Instant Alert feature allows users to manually transmit an alert to others warning of a potentially hazardous situation.

The Altair 5X Multigas detector features an unparalleled flexibility and versatility designed to meet the unique needs of its many users. From high-resolution color displays or monochromatic LED screens to its 18 different language options, the detectors versatility is unmatched by competitors. Users can also find a wide variety of applications, kits, and accessories to better customize the unit.

Cell Sensor technology

Durability

Specifications

With an audible alarm of greater than 95 decibels, a visual alarm of 2 LED lights, and a standard vibrating alarm, the unit is well designed to alert users of potential gases. The devices can also effectively store up to 1000 events.

Users can also minimize risk of user errors by participating in MSA s online training and web content. This includes new Altair 5 X Multigas Detector simulation tutorials designed to simulate instrument operation.

C01955 Xsafe Safe Area Flammable Gas Detector, methane, mV version, M20 cable entry by Crowcon

Xsafe is a cost effective solution for flammable gas detection in safe areas such as boiler rooms, kitchens and commercial buildings.

Features:

Rugged and reliable

• Constructed using corrosion resistant aluminium, 316 stainless steel or glass-reinforced nylon (Type 1 only)
• Ingress protection to IP65 as standard, IP66 with accessory
• IEC61508 SIL compliant

Low cost of ownership

• Plug-in sensor modules for quick and simple replacement
• Long-life sensors

Wide range of approvals

• ATEX, UL, IECEx and MED certified

Flexible installation options

• Wall or ceiling mounting as standard
• Accessories are available for duct mounting and sampling applications
• High temperature models available

C01957 Xsafe Safe Area Flammable Gas Detector, methane, mV version, 1/2" NPT cable entry by Crowcon

Xsafe is a cost effective solution for flammable gas detection in safe areas such as boiler rooms, kitchens and commercial buildings.

Features:

Rugged and reliable

• Constructed using corrosion resistant aluminium, 316 stainless steel or glass-reinforced nylon (Type 1 only)
• Ingress protection to IP65 as standard, IP66 with accessory
• IEC61508 SIL compliant

Low cost of ownership

• Plug-in sensor modules for quick and simple replacement
• Long-life sensors

Wide range of approvals

• ATEX, UL, IECEx and MED certified

Flexible installation options

• Wall or ceiling mounting as standard
• Accessories are available for duct mounting and sampling applications
• High temperature models available

SPSTAXF1 Sensepoint Detector with Junction Box, 0-100%LEL Methane by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

• Flammable, toxic and Oxygen versions available
• Suitable for indoor or outdoor use
• IP65 as standard

Proven Sensor Technology

• Surecell™ electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life

ATEX Certified

• Complies with the latest European standards
• Hazardous area and performance approvals
• Can be used for uncertified applications

Easy to Use

• Factory set operation
• Simple sensor replacement
• Minimal training required

Friendly Installation

• Universal junction box
• One box, three entries
• Metric and NPT compatibility
• Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

• Weather Housing (IP66)
• Flow adaptor
• Collecting cone

XGB-A1-01-A-ZC-ID Xgard Bright Addressable FixedPoint Gas Detector, Infra Red Methane 0-100% LEL by Crowcon

Xgard Bright is a versatile platform offering flammable and toxic gas detection and oxygen monitoring, while providing ease of operation and reduced installation costs.

Lowering the cost of installation, the 4-wire addressable implementation drastically reduces cabling requirements. The large OLED display allows users to easily work with Xgard Bright during install, calibration and routine maintenance without the need to open the housing.

Features

• Supports flammable, toxic, oxygen, sensor
• Explosion-proof housing
• IP65 or IP66 rating (with weatherproof cap)
• Plug-in type terminal blocks for easy wiring
• Choice of M20 or 1/2" NPT conduit connection
• Configuring via magnetic key
• Non-intrusive calibration without removing access
• MODBUS or Hart communication for remote access
• Low power requirement (-3W max)

GD-A8-CH4 GD-A8 Diffusion Detector Assembly, 0 - 100% LEL, Methane by RKI Instruments

Features

• Compact & lightweight
• Easy maintenance
• Quick-fit sensor replacement
• Compatible sensor for diffusion sampling and sample drawing detector heads
• Long life sampling pump (GD-D8V series)
• Explosion proof
• Wide variety of accessories

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

C01960 Xsafe Safe Area Flammable Gas Detector, 4-20mA Version, M20, Methane by Crowcon

Xsafe is a cost effective solution for flammable gas detection in safe areas such as boiler rooms, kitchens and commercial buildings.

Features:

Rugged and reliable

• Constructed using corrosion resistant aluminium, 316 stainless steel or glass-reinforced nylon (Type 1 only)
• Ingress protection to IP65 as standard, IP66 with accessory
• IEC61508 SIL compliant

Low cost of ownership

• Plug-in sensor modules for quick and simple replacement
• Long-life sensors

Wide range of approvals

• ATEX, UL, IECEx and MED certified

Flexible installation options

• Wall or ceiling mounting as standard
• Accessories are available for duct mounting and sampling applications
• High temperature models available

C011115 Xsafe Safe Area Flammable Gas Detector, methane, 4-20mA version, 1/2" NPT cable entry, Calibration: 100%LEL= 5%vol CH4 by Crowcon

Xsafe is a cost effective solution for flammable gas detection in safe areas such as boiler rooms, kitchens and commercial buildings.

Features:

Rugged and reliable

• Constructed using corrosion resistant aluminium, 316 stainless steel or glass-reinforced nylon (Type 1 only)
• Ingress protection to IP65 as standard, IP66 with accessory
• IEC61508 SIL compliant

Low cost of ownership

• Plug-in sensor modules for quick and simple replacement
• Long-life sensors

Wide range of approvals

• ATEX, UL, IECEx and MED certified

Flexible installation options

• Wall or ceiling mounting as standard
• Accessories are available for duct mounting and sampling applications
• High temperature models available

C011117 Xsafe Safe Area Flammable Gas Detector, methane, 4-20mA version, M20 cable entry, Calibration: 100%LEL= 5%vol CH4 by Crowcon

Xsafe is a cost effective solution for flammable gas detection in safe areas such as boiler rooms, kitchens and commercial buildings.

Features:

Rugged and reliable

• Constructed using corrosion resistant aluminium, 316 stainless steel or glass-reinforced nylon (Type 1 only)
• Ingress protection to IP65 as standard, IP66 with accessory
• IEC61508 SIL compliant

Low cost of ownership

• Plug-in sensor modules for quick and simple replacement
• Long-life sensors

Wide range of approvals

• ATEX, UL, IECEx and MED certified

Flexible installation options

• Wall or ceiling mounting as standard
• Accessories are available for duct mounting and sampling applications
• High temperature models available

SD-1DRI-CH4 SD-1DRI Detector Head, methane (CH4) 0 - 100% LEL, 4-20 mA transmitter with sample adapter (flow through chamber) by RKI Instruments

RKI Instrument's model SD-1 Series smart combustible gas, toxic gas, oxygen, and organic vapor detector/transmitter is a robust and reliable explosion proof design for detecting LEL and ppm levels of hazardous atmospheres. In addition to measuring the common %LEL levels of methane, hexane and isobutane, for example, the SD-1 Series also has the capability of measuring a wide variety of toxic organic compounds in a PPM range such as acrylonitrile, ethylene oxide, n-methyl pyrolidone, methylene chloride and many others. This gives the SD-1 Series a unique niche in RKI's gas detector line-up. The SD-1 has an ATEX/IECEX approval for the explosion class ExdIICT5 and has an IP-65/67 ingress protection rating.

The SD-1 has a 4-20mA signal output as well as relay contacts for interfacing with other control systems or monitoring facilities. All SD-1 types are also available with HART communication instead of 4-20mA relay. SIL2 is available for the IR, EC and OX types. In facilitating non-intrusive conditions in hazardous atmospheres, the SD-1 can be calibrated and it's menus navigated with magnetic switches and a magnetic key.

Features

• Wide range of detectable gases: % LEL Combustibles, catalytic; % LEL Combustibles, IR; H2S, CO, & O₂; PPM for acrylonitrile, hydrogen, ethylene oxide, n-methyl pyrolidone, methylene chloride, and many others
• Sensor types include: Catalytic, Galvanic Cell, MOS, IR, & Electrochemical
• Direct digital display of gas readings
• HART Communication protocol or 4-20 linear output
• Available with SIL2 approval (IR, EC, OX versions)
• Easy maintenance using a magnetic key
• Self-diagnosis by microprocessor
• Low power operation (Maximum: 3W)
• Explosion proof: ATEX, IECEx, ExdIICT5

Applications

• LNG Terminal
• Petrochemical/Chemical plants
• Power plant
• Utilities
• Iron and steel works

*Please note we can only ship RKI products to customers within the United States

1316-002 G313 Single Gas Detector for Methane (Natural Gas), Propane, Refrigerant and other MOS Detectable VOCs, with NiMH Rechargeable Battery Pack by GfG

Pinpoint the Smallest Leaks

Small leaks in pipes or storage tanks can release enough gas to build up dangerous concentrations. The careful inspection of flanged, threaded and soldered connections before and after installation will ensure equipment and worker safety. The G300 leak detector will make leakage sprays a thing of the past

Clear and simple displays and warnings

Changing gas concentrations are indicated audibly and visually. The frequency of the audible warning rises with gas concentrations, allowing the user to pinpoint leaks. The bar graph display will warn the user if dangerous gas concentrations arise.

Light, compact and durable

Designed for one-handed operation, the G300 reacts to concentrations as small as 5 ppm and measures up to more than 10,000 ppm or 1% volume. The sensor is located at the end of a flexible gooseneck or a helix cable to allow the user to reach difficult or unreachable locations. The G300 is available with or without explosion protection for ammonia and combustible gases. The G311 operates on four "AA" alkaline batteries. All others have a rechargeable battery with run times of more than eight hours.

Features

• Small, light, and durable leak detector
• For combustible gases and ammonia
• More than 8 hours of continuous operation
• Explosion-proof models available

Standard Accessories

• G300 Detector
• Specified sensor
• Alkaline batteries or rechargeable NiMH battery pack as specified
• Charger (with rechargeable battery pack only)
• Fixed gooseneck (with alkaline battery pack only)
• Manual

1316009 G311 Single Gas Detector for Methane (Natural Gas), Propane, and Other MOS Detectable VOCs, with 4 AA Alkaline Batteries by GfG

Pinpoint the Smallest Leaks

Small leaks in pipes or storage tanks can release enough gas to build up dangerous concentrations. The careful inspection of flanged, threaded and soldered connections before and after installation will ensure equipment and worker safety. The G300 leak detector will make leakage sprays a thing of the past

Clear and simple displays and warnings

Changing gas concentrations are indicated audibly and visually. The frequency of the audible warning rises with gas concentrations, allowing the user to pinpoint leaks. The bar graph display will warn the user if dangerous gas concentrations arise.

Light, compact and durable

Designed for one-handed operation, the G300 reacts to concentrations as small as 5 ppm and measures up to more than 10,000 ppm or 1% volume. The sensor is located at the end of a flexible gooseneck or a helix cable to allow the user to reach difficult or unreachable locations. The G300 is available with or without explosion protection for ammonia and combustible gases. The G311 operates on four "AA" alkaline batteries. All others have a rechargeable battery with run times of more than eight hours.

Features

• Small, light, and durable leak detector
• For combustible gases and ammonia
• More than 8 hours of continuous operation
• Explosion-proof models available

Standard Accessories

• G300 Detector
• Specified sensor
• Alkaline batteries or rechargeable NiMH battery pack as specified
• Charger (with rechargeable battery pack only)
• Fixed gooseneck (with alkaline battery pack only)
• Manual

C01961 Xsafe Safe Area Flammable Gas Detector, 4-20mA Version, 1/2" NPT, Methane by Crowcon

Xsafe is a cost effective solution for flammable gas detection in safe areas such as boiler rooms, kitchens and commercial buildings.

Features:

Rugged and reliable

• Constructed using corrosion resistant aluminium, 316 stainless steel or glass-reinforced nylon (Type 1 only)
• Ingress protection to IP65 as standard, IP66 with accessory
• IEC61508 SIL compliant

Low cost of ownership

• Plug-in sensor modules for quick and simple replacement
• Long-life sensors

Wide range of approvals

• ATEX, UL, IECEx and MED certified

Flexible installation options

• Wall or ceiling mounting as standard
• Accessories are available for duct mounting and sampling applications
• High temperature models available