Honeywell Wireless Gas Sensor

1309A0059 E3Point Gas Monitor with Remote Sensor, Hydrogen (H2) by Honeywell Analytics

Toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line.

Product Overview:

E3Point is capable of detecting the widest range of toxic and combustible gases found in commercial building spaces and outbuildings, including CO, NO2, O2, H2, H2S, CH4 and C3H8. It can be used as a standalone unit with single or dual-gas detection (i.e. using a remote sensor) or deployed as a networkable device (interoperable with BACnet, Modbus or other Building Automation System): E3Point also functions with existing controller-based gas monitoring systems and wired-wireless gas monitoring system components.

E3Point uses Demand Control Ventilation—through relays, Building Automation System (BAS) or controller—to increase energy savings, extend fan life and align with green building best practices. In its network configuration, E3Point also optimizes HVAC, fire/smoke, surveillance and other building systems performance.

Intelligent product design reduces the unit's cost of ownership while increasing flexibility of application. Smart sensors are pre-calibrated, auto-configure upon set-up and operate continuously on patented Reflex© technology which continuously monitors sensor cell condition and alerts user to fault status. The plug-n-play sensor cartridge, user-friendly menu and wiring options simplify installation and maintenance, and reduce the cost of gas monitoring over the life of the unit.

Flexible Operation:

• Comes in standalone, standalone with remote (dual gas mode) or network versions
• Connects to analog or digital systems
• Works with virtually any BAS including BACnet and Modbus
• Connects to wired or wireless system (via 301CW wireless controller)
• Wall or duct mount
• Factory-calibrated cartridges

Cost Effective:

• Saves energy through Demand Control Ventilation (DCV)
• Simplifies installation/maintenance through plug-n-play sensor
• Remote sensor option provides dual gas monitoring (standalone version only)
• Optimizes BAS, fire, ventilation and other security systems

Versatile Communications:

• Works through BAS to improve fault diagnostics and collect data on gas concentration levels, sensor condition, etc.
• Couple with 301C to log data and daisy-chain up to 96 E3Point units

Advanced Sensing Technology:

• Detects CO, NO2, O2, H2, H2S, CH4, C3H8
• Advanced electrochemical (for toxic gases)and catalytic bead (for combustible gases) sensor performance
• Uses patented Reflex® and smart cartridge technologies

Electrical Certifications:

• US (ANSI/UL 61010-1)
• Canada (CSA C22.2 No. 61010-1)

Features & Benefits:

• Standalone, standalone with remote (dual gas mode) or network versions available
• Saves energy through Demand Control Ventilation

Quick Specs:

• Complete toxic and combustible gas detection system with onboard sounder
• Available in single point or dual gas options
• Analog 4-20 mA or Digital outputs (Bacnet, Modbus, and Lonworks)

CP-I-0000H1S3-B-00 BW Icon+ Multi-Gas Detector, H2S SO2 Black by BW Technologies

Serviceable four-gas detector with a choice of six sensors — Honeywell BW™ Icon+ delivers an icon-based experience in a serviceable package. It enables you to maximize the lifespan of your four-gas detectors, optimize long-term cost of ownership and select from multiple gas sensors for flexible applications.

ICON DISPLAY FOR FAST DECISIONS

Like the fixed-life Honeywell BW™ Icon, Honeywell BW™ Icon+ is named for its firstin-the-industry display of simple icons for gas levels and device status. That means no live gas readings for workers to interpret and no time-consuming training. Instead, when there's a gas alarm, the bell icon on the display will illuminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area.

INTELLIGENT SENSORS FOR PREDICTIVE MAINTENANCE

How much life is remaining in the H₂S sensor, based on its age and gas exposure? When does the O₂ sensor need to be calibrated? Honeywell BW™ Icon+ has i-Series intelligent sensors that answer these kinds of questions, so you can take action and prevent unexpected downtime.

REPORTING AND ANALYSIS FROM YOUR SMARTPHONE

Want to see the full concentration of a gas or other information not on the icon-based display? Need to report a gas alarm? Simply download the Honeywell Safety Suite Device Configurator app, use Bluetooth® to pair your smartphone with the detector, and open the app to see the data — all organized in a report that's ready to send.

FEATURES AND BENEFITS

• RELIABLE: Two months of battery runtime on a 4.5-hour charge — and up to four months if you turn off the detector at the end of each shift. No daily charging, no unexpected downtime.
• COMPATIBLE: The Honeywell BW™ Icon+ is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite and also with TouchConnect™ using Bluetooth® for wireless configuration.
• ACCURATE: Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
• EASY TO MANAGE: The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.
• RESPONSIVE: 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
• EASY TO USE: Small, lightweight and wearable. One-button operation.

Part Number: CP-I-0000H1S3-B-00

HRR-C303100ABK-000 BW RigRat Transportable Multi-gas Area Monitor - Enhanced Diffusion I/O-Wireless, Americas, Mesh 2.4,NDIR LEL LP, CO, H2S, O2 by BW Technologies

Honeywell BW™ RigRat is so easy to use that workers can operate it with confidence, trusting it to alert them to gas threats in their proximity — indoors and out, in temperatures from -40 to +140°F (-40 to +60°C). Honeywell BW™ RigRat delivers:

• Up to 8 weeks of runtime on a single charge. Longer runtime than any area monitor in its class.
• Up to six slots for interchangeable gas sensors. Choice of electrochemical, PID, infrared, and catalytic bead sensors (measuring percent LEL and percent by volume).
• Integrated Noise sensor and Metrological data sensors.
• Enhanced configurations with programmable input and output.
• Approval for explosive atmosphere. Certified for ATEX/IECEx Zone 0 and CSA C1D1.
• Flexible applications. Zone declassification, turnarounds, confined space, routine maintenance, fence line and more. Available with pump for remote sampling.
• One-button operation. Grab and go. No expertise required.
• Simple setup with a smartphone. Easy mobile app for alarm set points, calibration records and more.
• Added protection. Alerts workers to nearby gas leaks, whereas personal detectors cover only the breathing zone.

FEATURES AND BENEFITS

• WIRELESS SAFETY PERIMETER: Position several Honeywell BW™ RigRat monitors to form a wireless safety perimeter.
• REMOTE MONITORING: Use with Honeywell's remote monitoring software to see gas readings, location and other data from any device with an internet connection — for fast, informed decisions. Add an optional noise sensor or meteorological sensor.
• HONEYWELL TOUCHPOINT™ PLUS COMPATIBLE: Use with the Honeywell Touchpoint™ Plus controller for visibility on Honeywell BW™ RigRat monitors and workers' personal detectors.

OTHER HONEYWELL BWTM RIGRAT FEATURES:

• Line power for extended runtime in the field
• I/O ports providing additional input capabilities and local executive activation.
• Inert mode that prevents alarm in normal ambient air.
• Large, easy-to-read display
• Rugged, weatherproof design, with optional protective cage

Part Number: HRR-C303100ABK-000

HRR-H301009ABK-000 BW RigRat Transportable Multi-gas Area Monitor - Enhanced Pump I/O-Wireless/Noise, Americas, Mesh 900, Cat LEL, CO, H2S, O2 by BW Technologies

Honeywell BW™ RigRat is so easy to use that workers can operate it with confidence, trusting it to alert them to gas threats in their proximity — indoors and out, in temperatures from -40 to +140°F (-40 to +60°C). Honeywell BW™ RigRat delivers:

• Up to 8 weeks of runtime on a single charge. Longer runtime than any area monitor in its class.
• Up to six slots for interchangeable gas sensors. Choice of electrochemical, PID, infrared, and catalytic bead sensors (measuring percent LEL and percent by volume).
• Integrated Noise sensor and Metrological data sensors.
• Enhanced configurations with programmable input and output.
• Approval for explosive atmosphere. Certified for ATEX/IECEx Zone 0 and CSA C1D1.
• Flexible applications. Zone declassification, turnarounds, confined space, routine maintenance, fence line and more. Available with pump for remote sampling.
• One-button operation. Grab and go. No expertise required.
• Simple setup with a smartphone. Easy mobile app for alarm set points, calibration records and more.
• Added protection. Alerts workers to nearby gas leaks, whereas personal detectors cover only the breathing zone.

FEATURES AND BENEFITS

• WIRELESS SAFETY PERIMETER: Position several Honeywell BW™ RigRat monitors to form a wireless safety perimeter.
• REMOTE MONITORING: Use with Honeywell's remote monitoring software to see gas readings, location and other data from any device with an internet connection — for fast, informed decisions. Add an optional noise sensor or meteorological sensor.
• HONEYWELL TOUCHPOINT™ PLUS COMPATIBLE: Use with the Honeywell Touchpoint™ Plus controller for visibility on Honeywell BW™ RigRat monitors and workers' personal detectors.

OTHER HONEYWELL BWTM RIGRAT FEATURES:

• Line power for extended runtime in the field
• I/O ports providing additional input capabilities and local executive activation.
• Inert mode that prevents alarm in normal ambient air.
• Large, easy-to-read display
• Rugged, weatherproof design, with optional protective cage

Part Number: HRR-H301009ABK-000

1309A0042 E3Point Gas Monitor without Sensor, Wall Mount, Analog, 24VAC/VDC by Honeywell Analytics

Toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line.

Product Overview:

E3Point is capable of detecting the widest range of toxic and combustible gases found in commercial building spaces and outbuildings, including CO, NO2, O2, H2, H2S, CH4 and C3H8. It can be used as a standalone unit with single or dual-gas detection (i.e. using a remote sensor) or deployed as a networkable device (interoperable with BACnet, Modbus or other Building Automation System): E3Point also functions with existing controller-based gas monitoring systems and wired-wireless gas monitoring system components.

E3Point uses Demand Control Ventilation—through relays, Building Automation System (BAS) or controller—to increase energy savings, extend fan life and align with green building best practices. In its network configuration, E3Point also optimizes HVAC, fire/smoke, surveillance and other building systems performance.

Intelligent product design reduces the unit's cost of ownership while increasing flexibility of application. Smart sensors are pre-calibrated, auto-configure upon set-up and operate continuously on patented Reflex© technology which continuously monitors sensor cell condition and alerts user to fault status. The plug-n-play sensor cartridge, user-friendly menu and wiring options simplify installation and maintenance, and reduce the cost of gas monitoring over the life of the unit.

Flexible Operation:

• Comes in standalone, standalone with remote (dual gas mode) or network versions
• Connects to analog or digital systems
• Works with virtually any BAS including BACnet and Modbus
• Connects to wired or wireless system (via 301CW wireless controller)
• Wall or duct mount
• Factory-calibrated cartridges

Cost Effective:

• Saves energy through Demand Control Ventilation (DCV)
• Simplifies installation/maintenance through plug-n-play sensor
• Remote sensor option provides dual gas monitoring (standalone version only)
• Optimizes BAS, fire, ventilation and other security systems

Versatile Communications:

• Works through BAS to improve fault diagnostics and collect data on gas concentration levels, sensor condition, etc.
• Couple with 301C to log data and daisy-chain up to 96 E3Point units

Advanced Sensing Technology:

• Detects CO, NO2, O2, H2, H2S, CH4, C3H8
• Advanced electrochemical (for toxic gases)and catalytic bead (for combustible gases) sensor performance
• Uses patented Reflex® and smart cartridge technologies

Electrical Certifications:

• US (ANSI/UL 61010-1)
• Canada (CSA C22.2 No. 61010-1)

Features & Benefits:

• Standalone, standalone with remote (dual gas mode) or network versions available
• Saves energy through Demand Control Ventilation

Quick Specs:

• Complete toxic and combustible gas detection system with onboard sounder
• Available in single point or dual gas options
• Analog 4-20 mA or Digital outputs (Bacnet, Modbus, and Lonworks)

CP-I-00X10000-B-00 BW Icon+ Multi-Gas Detector, O2 Black by BW Technologies

Serviceable four-gas detector with a choice of six sensors — Honeywell BW™ Icon+ delivers an icon-based experience in a serviceable package. It enables you to maximize the lifespan of your four-gas detectors, optimize long-term cost of ownership and select from multiple gas sensors for flexible applications.

ICON DISPLAY FOR FAST DECISIONS

Like the fixed-life Honeywell BW™ Icon, Honeywell BW™ Icon+ is named for its firstin-the-industry display of simple icons for gas levels and device status. That means no live gas readings for workers to interpret and no time-consuming training. Instead, when there's a gas alarm, the bell icon on the display will illuminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area.

INTELLIGENT SENSORS FOR PREDICTIVE MAINTENANCE

How much life is remaining in the H₂S sensor, based on its age and gas exposure? When does the O₂ sensor need to be calibrated? Honeywell BW™ Icon+ has i-Series intelligent sensors that answer these kinds of questions, so you can take action and prevent unexpected downtime.

REPORTING AND ANALYSIS FROM YOUR SMARTPHONE

Want to see the full concentration of a gas or other information not on the icon-based display? Need to report a gas alarm? Simply download the Honeywell Safety Suite Device Configurator app, use Bluetooth® to pair your smartphone with the detector, and open the app to see the data — all organized in a report that's ready to send.

FEATURES AND BENEFITS

• RELIABLE: Two months of battery runtime on a 4.5-hour charge — and up to four months if you turn off the detector at the end of each shift. No daily charging, no unexpected downtime.
• COMPATIBLE: The Honeywell BW™ Icon+ is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite and also with TouchConnect™ using Bluetooth® for wireless configuration.
• ACCURATE: Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
• EASY TO MANAGE: The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.
• RESPONSIVE: 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
• EASY TO USE: Small, lightweight and wearable. One-button operation.

Part Number: CP-I-00X10000-B-00

HRR-D301009ABK-000 BW RigRat Transportable Multi-gas Area Monitor - Enhanced Pump I/O-Wireless, Americas, Mesh 900, Cat LEL, CO, H2S, O2 by BW Technologies

Honeywell BW™ RigRat is so easy to use that workers can operate it with confidence, trusting it to alert them to gas threats in their proximity — indoors and out, in temperatures from -40 to +140°F (-40 to +60°C). Honeywell BW™ RigRat delivers:

• Up to 8 weeks of runtime on a single charge. Longer runtime than any area monitor in its class.
• Up to six slots for interchangeable gas sensors. Choice of electrochemical, PID, infrared, and catalytic bead sensors (measuring percent LEL and percent by volume).
• Integrated Noise sensor and Metrological data sensors.
• Enhanced configurations with programmable input and output.
• Approval for explosive atmosphere. Certified for ATEX/IECEx Zone 0 and CSA C1D1.
• Flexible applications. Zone declassification, turnarounds, confined space, routine maintenance, fence line and more. Available with pump for remote sampling.
• One-button operation. Grab and go. No expertise required.
• Simple setup with a smartphone. Easy mobile app for alarm set points, calibration records and more.
• Added protection. Alerts workers to nearby gas leaks, whereas personal detectors cover only the breathing zone.

FEATURES AND BENEFITS

• WIRELESS SAFETY PERIMETER: Position several Honeywell BW™ RigRat monitors to form a wireless safety perimeter.
• REMOTE MONITORING: Use with Honeywell's remote monitoring software to see gas readings, location and other data from any device with an internet connection — for fast, informed decisions. Add an optional noise sensor or meteorological sensor.
• HONEYWELL TOUCHPOINT™ PLUS COMPATIBLE: Use with the Honeywell Touchpoint™ Plus controller for visibility on Honeywell BW™ RigRat monitors and workers' personal detectors.

OTHER HONEYWELL BWTM RIGRAT FEATURES:

• Line power for extended runtime in the field
• I/O ports providing additional input capabilities and local executive activation.
• Inert mode that prevents alarm in normal ambient air.
• Large, easy-to-read display
• Rugged, weatherproof design, with optional protective cage

Part Number: HRR-D301009ABK-000

HRR-A3005B9K00-000 Rigrat Basic Diffusion, Non-wireless, Infrared CO2, H2S, LEL, O2 by BW Technologies

Honeywell BW™ RigRat is so easy to use that workers can operate it with confidence, trusting it to alert them to gas threats in their proximity — indoors and out, in temperatures from -40 to +140°F (-40 to +60°C). Honeywell BW™ RigRat delivers:

• Up to 8 weeks of runtime on a single charge. Longer runtime than any area monitor in its class.
• Up to six slots for interchangeable gas sensors. Choice of electrochemical, PID, infrared, and catalytic bead sensors (measuring percent LEL and percent by volume).
• Integrated Noise sensor and Metrological data sensors.
• Enhanced configurations with programmable input and output.
• Approval for explosive atmosphere. Certified for ATEX/IECEx Zone 0 and CSA C1D1.
• Flexible applications. Zone declassification, turnarounds, confined space, routine maintenance, fence line and more. Available with pump for remote sampling.
• One-button operation. Grab and go. No expertise required.
• Simple setup with a smartphone. Easy mobile app for alarm set points, calibration records and more.
• Added protection. Alerts workers to nearby gas leaks, whereas personal detectors cover only the breathing zone.

FEATURES AND BENEFITS

• WIRELESS SAFETY PERIMETER: Position several Honeywell BW™ RigRat monitors to form a wireless safety perimeter.
• REMOTE MONITORING: Use with Honeywell's remote monitoring software to see gas readings, location and other data from any device with an internet connection — for fast, informed decisions. Add an optional noise sensor or meteorological sensor.
• HONEYWELL TOUCHPOINT™ PLUS COMPATIBLE: Use with the Honeywell Touchpoint™ Plus controller for visibility on Honeywell BW™ RigRat monitors and workers' personal detectors.

OTHER HONEYWELL BWTM RIGRAT FEATURES:

• Line power for extended runtime in the field
• I/O ports providing additional input capabilities and local executive activation.
• Inert mode that prevents alarm in normal ambient air.
• Large, easy-to-read display
• Rugged, weatherproof design, with optional protective cage

Part Number: HRR-A3005B9K00-000

D01-S006-011 MeshGuard Stainless Steel Detector, Sulfur Dioxide by RAE Systems

The RAE Systems by Honeywell MeshGuard gas detection monitor is a key building block of the MeshGuard intelligent network of connected sensors for gas detection in industrial safety and oil and gas applications.

The MeshGuard system is designed for quick deployment in areas where low cost/high ROI solutions are required. MeshGuard is available with field-replaceable precision sensors specifically designed to sense toxic and flammable gases.

Key Features

• Stainless Steel housing
• Self-forming wireless network; units come online automatically
• Compact and lightweight
• IP-65 rated weather resistant, and splash guard equipped for sensor protection
• Multiple controller options for realtime wireless data collection and viewing
• Self-healing network automatically routes data back to controller through best wireless path available
• Battery powered operation for up to 6 months
• SolarPak provides 24/7 uptime
• Intrinsically Safe
• Magnetic mounting option for quick and easy MeshGuard installation

Applications

• Oil and gas drilling operations
• Oil and gas production
• Plant maintenance turnarounds
• Industrial safety
• Tank farms
• Shipyards and maritime
• Fast deployment and decommissioning time
• Simple to install and operate
• Rugged and reliable
• Versatile to accommodate many applications

MeshGuard Detector Includes:

• MeshGuard detector with sensor as specified
• Operation and maintenance manual
• Calibration gas test adapter
• Enhanced-capacity Lithium battery installed
• Maintenance tool

1309A0037 E3Point Gas Monitor, Nitrogen dioxide (NO2); -40° to 50°C (-40° to 122°F) by Honeywell Analytics

Toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line.

Product Overview:

E3Point is capable of detecting the widest range of toxic and combustible gases found in commercial building spaces and outbuildings, including CO, NO2, O2, H2, H2S, CH4 and C3H8. It can be used as a standalone unit with single or dual-gas detection (i.e. using a remote sensor) or deployed as a networkable device (interoperable with BACnet, Modbus or other Building Automation System): E3Point also functions with existing controller-based gas monitoring systems and wired-wireless gas monitoring system components.

E3Point uses Demand Control Ventilation—through relays, Building Automation System (BAS) or controller—to increase energy savings, extend fan life and align with green building best practices. In its network configuration, E3Point also optimizes HVAC, fire/smoke, surveillance and other building systems performance.

Intelligent product design reduces the unit's cost of ownership while increasing flexibility of application. Smart sensors are pre-calibrated, auto-configure upon set-up and operate continuously on patented Reflex© technology which continuously monitors sensor cell condition and alerts user to fault status. The plug-n-play sensor cartridge, user-friendly menu and wiring options simplify installation and maintenance, and reduce the cost of gas monitoring over the life of the unit.

Flexible Operation:

• Comes in standalone, standalone with remote (dual gas mode) or network versions
• Connects to analog or digital systems
• Works with virtually any BAS including BACnet and Modbus
• Connects to wired or wireless system (via 301CW wireless controller)
• Wall or duct mount
• Factory-calibrated cartridges

Cost Effective:

• Saves energy through Demand Control Ventilation (DCV)
• Simplifies installation/maintenance through plug-n-play sensor
• Remote sensor option provides dual gas monitoring (standalone version only)
• Optimizes BAS, fire, ventilation and other security systems

Versatile Communications:

• Works through BAS to improve fault diagnostics and collect data on gas concentration levels, sensor condition, etc.
• Couple with 301C to log data and daisy-chain up to 96 E3Point units

Advanced Sensing Technology:

• Detects CO, NO2, O2, H2, H2S, CH4, C3H8
• Advanced electrochemical (for toxic gases)and catalytic bead (for combustible gases) sensor performance
• Uses patented Reflex® and smart cartridge technologies

Electrical Certifications:

• US (ANSI/UL 61010-1)
• Canada (CSA C22.2 No. 61010-1)

Features & Benefits:

• Standalone, standalone with remote (dual gas mode) or network versions available
• Saves energy through Demand Control Ventilation

Quick Specs:

• Complete toxic and combustible gas detection system with onboard sounder
• Available in single point or dual gas options
• Analog 4-20 mA or Digital outputs (Bacnet, Modbus, and Lonworks)

W01B11010205607901 AreaRAE Plus Portable Gas Monitor, CSA / ISM 900MHz/ Mesh / PID ppm / LEL / O₂ / CO / H₂S / RAEMet by RAE Systems

AreaRAE Plus is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic chemicals, and meteorological factors that affect the speed and direction of the gas.

Whether you need to protect your community by monitoring a fence line, protect your employees during a maintenance turnaround, or protect your fire and hazmat team during emergency response, the AreaRAE Plus alerts you to threats with local audible and visual alarms. Plus, it works with Honeywell's remote monitoring software to give you a real-time view of threat readings from a safe location.

AreaRAE Plus delivers flexibility for your changing requirements:

Up to six 4R+ sensors for toxic and combustible gas.

Choose from a mix of up to 20 sensors based on your needs and switch them out whenever your needs change.

7R+ photoionization detector.

Monitor VOCs in parts per million, with built-in compensation for temperature and humidity.

Optional meteorological sensor for tracking toxic plumes.

Honeywell's compact RAEMet sensor sits at the top of the AreaRAE Plus and measures wind speed, wind direction, temperature and humidity. This information is then modeled in Honeywell's real time monitoring software which integrates the ALOHA hazard monitoring program.

Applications

• Industrial emergency response teams
• Maintenance turnarounds / Shutdowns
• Fence line monitoring
• Clearing a confined space for entry
• Wastewater pipeline rehabilitation
• Site remediation
• Fumigation, excavation and other environmental liabilities

Ease and Fexibility

• Available in Rapid Deployment Kit for quick threat assessment
• User-friendly interface; turn it on and go
• Flexible power options for short and long-term deployments
• Easy to hear and see, with 108-decibel alarm
• Easy USB connection to configuration software
• Built-in Mesh modem for short range comminution with RAE Systems wireless portable detectors.
• Easy USB connection to configuration software
• Device Management with Honeywell Sotera™

Remote Visibility on Threats

• Delivers real-time readings to Honeywell's remote monitoring software, so you can instantly determine the location and severity of a threat
• Map-based display is accessible from any computer with an internet connection or from our laptop as a turnkey host
• Enables coordination and data sharing in joint operations

CPD-W7X1H1S3-Y-00 BW Flex Multi-Gas Detector, LEL-CB Unfiltered/O2/H2S/SO2/Yellow by BW Technologies

Whether you're protecting workers or first responders — in industries from steel and wastewater to paper and pulp — Honeywell BW™ Flex delivers the flexibility you need. Choose from more than 15 sensors to simultaneously detect up to 4 gas hazards.

REAL-TIME GAS READINGS AT A GLANCE

Honeywell BW™ Flex features a large high-resolution display with readings available in a wide range of languages. Vital safety information is conveyed clearly and effectively, enabling faster decision-making to protect lives in hazardous environments. Its innovative design, compact size and ease of use builds on the legacy of Honeywell BW™ gas detection products.

INTELLIGENT SENSORS FOR INCREASED SAFETY & UPTIME

Honeywell BW™ Flex incorporates i-Series intelligent sensors which monitor sensor status and provide advanced predictive calibration, maintenance and end-of-life information in real-time. These advanced alerts help reduce the likelihood of failure and increase awareness so preventive action can be taken to avoid safety incidents and unexpected downtime.

SIMPLIFIED GAS REPORTING AND ANALYSIS

Honeywell BW™ Flex can be paired with a smartphone easily via Bluetooth®. Download the Honeywell Safety Suite Device Configurator app for quick and precise device management, maintenance, reporting and analysis. Increase productivity by simplifying tasks like recording incidents and save time with one-click download for all instrument data.

FEATURES AND BENEFITS

• RELIABLE: Two months of battery runtime on a 4.5-hour charge with our new lowpowered IR LEL sensor. No daily charging, no unexpected downtime.
• COMPATIBLE: The Honeywell BW™ Flex Series is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite using Bluetooth® for wireless configuration.
• ACCURATE: Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
• EASY TO MANAGE: The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.
• RESPONSIVE: 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
• EASY TO USE: Small, lightweight and wearable. One-button operation.

Part Number: CPD-W7X1H1S3-Y-00

1309A9068 E3SMSCO NET MODBUS 24VAC/DC W/CO by Honeywell Analytics

Toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line.

Product Overview:

E3Point is capable of detecting the widest range of toxic and combustible gases found in commercial building spaces and outbuildings, including CO, NO2, O2, H2, H2S, CH4 and C3H8. It can be used as a standalone unit with single or dual-gas detection (i.e. using a remote sensor) or deployed as a networkable device (interoperable with BACnet, Modbus or other Building Automation System): E3Point also functions with existing controller-based gas monitoring systems and wired-wireless gas monitoring system components.

E3Point uses Demand Control Ventilation—through relays, Building Automation System (BAS) or controller—to increase energy savings, extend fan life and align with green building best practices. In its network configuration, E3Point also optimizes HVAC, fire/smoke, surveillance and other building systems performance.

Intelligent product design reduces the unit's cost of ownership while increasing flexibility of application. Smart sensors are pre-calibrated, auto-configure upon set-up and operate continuously on patented Reflex© technology which continuously monitors sensor cell condition and alerts user to fault status. The plug-n-play sensor cartridge, user-friendly menu and wiring options simplify installation and maintenance, and reduce the cost of gas monitoring over the life of the unit.

Flexible Operation:

• Comes in standalone, standalone with remote (dual gas mode) or network versions
• Connects to analog or digital systems
• Works with virtually any BAS including BACnet and Modbus
• Connects to wired or wireless system (via 301CW wireless controller)
• Wall or duct mount
• Factory-calibrated cartridges

Cost Effective:

• Saves energy through Demand Control Ventilation (DCV)
• Simplifies installation/maintenance through plug-n-play sensor
• Remote sensor option provides dual gas monitoring (standalone version only)
• Optimizes BAS, fire, ventilation and other security systems

Versatile Communications:

• Works through BAS to improve fault diagnostics and collect data on gas concentration levels, sensor condition, etc.
• Couple with 301C to log data and daisy-chain up to 96 E3Point units

Advanced Sensing Technology:

• Detects CO, NO2, O2, H2, H2S, CH4, C3H8
• Advanced electrochemical (for toxic gases)and catalytic bead (for combustible gases) sensor performance
• Uses patented Reflex® and smart cartridge technologies

Electrical Certifications:

• US (ANSI/UL 61010-1)
• Canada (CSA C22.2 No. 61010-1)

Features & Benefits:

• Standalone, standalone with remote (dual gas mode) or network versions available
• Saves energy through Demand Control Ventilation

Quick Specs:

• Complete toxic and combustible gas detection system with onboard sounder
• Available in single point or dual gas options
• Analog 4-20 mA or Digital outputs (Bacnet, Modbus, and Lonworks)

1309A0056 E3Point Gas Monitor with Remote Sensor, Oxygen (O2) by Honeywell Analytics

Toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line.

Product Overview:

E3Point is capable of detecting the widest range of toxic and combustible gases found in commercial building spaces and outbuildings, including CO, NO2, O2, H2, H2S, CH4 and C3H8. It can be used as a standalone unit with single or dual-gas detection (i.e. using a remote sensor) or deployed as a networkable device (interoperable with BACnet, Modbus or other Building Automation System): E3Point also functions with existing controller-based gas monitoring systems and wired-wireless gas monitoring system components.

E3Point uses Demand Control Ventilation—through relays, Building Automation System (BAS) or controller—to increase energy savings, extend fan life and align with green building best practices. In its network configuration, E3Point also optimizes HVAC, fire/smoke, surveillance and other building systems performance.

Intelligent product design reduces the unit's cost of ownership while increasing flexibility of application. Smart sensors are pre-calibrated, auto-configure upon set-up and operate continuously on patented Reflex© technology which continuously monitors sensor cell condition and alerts user to fault status. The plug-n-play sensor cartridge, user-friendly menu and wiring options simplify installation and maintenance, and reduce the cost of gas monitoring over the life of the unit.

Flexible Operation:

• Comes in standalone, standalone with remote (dual gas mode) or network versions
• Connects to analog or digital systems
• Works with virtually any BAS including BACnet and Modbus
• Connects to wired or wireless system (via 301CW wireless controller)
• Wall or duct mount
• Factory-calibrated cartridges

Cost Effective:

• Saves energy through Demand Control Ventilation (DCV)
• Simplifies installation/maintenance through plug-n-play sensor
• Remote sensor option provides dual gas monitoring (standalone version only)
• Optimizes BAS, fire, ventilation and other security systems

Versatile Communications:

• Works through BAS to improve fault diagnostics and collect data on gas concentration levels, sensor condition, etc.
• Couple with 301C to log data and daisy-chain up to 96 E3Point units

Advanced Sensing Technology:

• Detects CO, NO2, O2, H2, H2S, CH4, C3H8
• Advanced electrochemical (for toxic gases)and catalytic bead (for combustible gases) sensor performance
• Uses patented Reflex® and smart cartridge technologies

Electrical Certifications:

• US (ANSI/UL 61010-1)
• Canada (CSA C22.2 No. 61010-1)

Features & Benefits:

• Standalone, standalone with remote (dual gas mode) or network versions available
• Saves energy through Demand Control Ventilation

Quick Specs:

• Complete toxic and combustible gas detection system with onboard sounder
• Available in single point or dual gas options
• Analog 4-20 mA or Digital outputs (Bacnet, Modbus, and Lonworks)

W01A11110105607911 AreaRAE Pro Portable Gas Monitor, CSA / ISM 900MHz/ Wi-Fi / Mesh / PID ppb / LEL / O₂ / CO / H₂S / Gamma / RAEMet by RAE Systems

AreaRAE Pro is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic compounds, radiation and meteorological factors. Whether you're carrying it into a hazmat response, setting up perimeter at a fire or protecting a public venue, the AreaRAE Pro works with Honeywell's remote monitoring software to give you a real-time view of threat readings so you can make real time decisions to ensure the safety of your teams and the general public.

AreaRAE Pro delivers maximum flexibility and versatility in one device:

Up to six 4R+ sensors for toxic and combustible gas.

AreaRAE Pro offers more than 20 interchangeable sensors that can be swapped at a moments notice to meet the changing needs of first responders.

7R+ photoionization detector.

Monitor VOCs in parts per billion, with built-in compensation for temperature and humidity.

Meteorological station for tracking toxic plumes.

Honeywell's compact RAEMet sensor sits at the top of the AreaRAE Pro and measures wind speed, wind direction, temperature and humidity. This information is then modeled in Honeywell's real time monitoring software which integrates the ALOHA hazard monitoring program.

Optional gamma sensor for radiation detection.

Detect and measure gamma radiation with increased sensitivity and faster response without using an additional sensor slot.

Applications

• First responders
• Hazmat
• Civil Defense & Military
• Public Venue Protection

Ease and Fexibility

• Available in Rapid Deployment Kit for quick threat assessment
• User-friendly interface; turn it on and go
• Supports long-distance remote monitoring
• Built-in mesh modem for short-range monitoring - no external router required
• Flexible power options for short and long-term deployments
• Easy to hear and see, with 108-decibel alarm
• Easy USB connection to configuration software
• Device Management with Honeywell Sotera™

Remote Visibility on Threats

• Delivers real-time readings to Honeywell's remote monitoring software, so you can instantly determine the location and severity of a threat
• Map-based display is accessible from any computer with an internet connection or from our laptop as a turnkey host
• Enables coordination and data sharing in joint operations

BWS1-S-Y BW Solo Single-Gas Detector, (SO2) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-S-Y

W01B11110205607900 AreaRAE Plus Portable Gas Monitor, CSA / ISM 900MHz/ Wi-Fi / Mesh / PID ppm / LEL / O₂ / CO / H₂S by RAE Systems

AreaRAE Plus is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic chemicals, and meteorological factors that affect the speed and direction of the gas.

Whether you need to protect your community by monitoring a fence line, protect your employees during a maintenance turnaround, or protect your fire and hazmat team during emergency response, the AreaRAE Plus alerts you to threats with local audible and visual alarms. Plus, it works with Honeywell's remote monitoring software to give you a real-time view of threat readings from a safe location.

AreaRAE Plus delivers flexibility for your changing requirements:

Up to six 4R+ sensors for toxic and combustible gas.

Choose from a mix of up to 20 sensors based on your needs and switch them out whenever your needs change.

7R+ photoionization detector.

Monitor VOCs in parts per million, with built-in compensation for temperature and humidity.

Optional meteorological sensor for tracking toxic plumes.

Honeywell's compact RAEMet sensor sits at the top of the AreaRAE Plus and measures wind speed, wind direction, temperature and humidity. This information is then modeled in Honeywell's real time monitoring software which integrates the ALOHA hazard monitoring program.

Applications

• Industrial emergency response teams
• Maintenance turnarounds / Shutdowns
• Fence line monitoring
• Clearing a confined space for entry
• Wastewater pipeline rehabilitation
• Site remediation
• Fumigation, excavation and other environmental liabilities

Ease and Fexibility

• Available in Rapid Deployment Kit for quick threat assessment
• User-friendly interface; turn it on and go
• Flexible power options for short and long-term deployments
• Easy to hear and see, with 108-decibel alarm
• Easy USB connection to configuration software
• Built-in Mesh modem for short range comminution with RAE Systems wireless portable detectors.
• Easy USB connection to configuration software
• Device Management with Honeywell Sotera™

Remote Visibility on Threats

• Delivers real-time readings to Honeywell's remote monitoring software, so you can instantly determine the location and severity of a threat
• Map-based display is accessible from any computer with an internet connection or from our laptop as a turnkey host
• Enables coordination and data sharing in joint operations

CPD-W6X1H1S3-Y-00 BW Flex Multi-Gas Detector, LEL-CB Filtered/O2/H2S/SO2/Yellow by BW Technologies

Whether you're protecting workers or first responders — in industries from steel and wastewater to paper and pulp — Honeywell BW™ Flex delivers the flexibility you need. Choose from more than 15 sensors to simultaneously detect up to 4 gas hazards.

REAL-TIME GAS READINGS AT A GLANCE

Honeywell BW™ Flex features a large high-resolution display with readings available in a wide range of languages. Vital safety information is conveyed clearly and effectively, enabling faster decision-making to protect lives in hazardous environments. Its innovative design, compact size and ease of use builds on the legacy of Honeywell BW™ gas detection products.

INTELLIGENT SENSORS FOR INCREASED SAFETY & UPTIME

Honeywell BW™ Flex incorporates i-Series intelligent sensors which monitor sensor status and provide advanced predictive calibration, maintenance and end-of-life information in real-time. These advanced alerts help reduce the likelihood of failure and increase awareness so preventive action can be taken to avoid safety incidents and unexpected downtime.

SIMPLIFIED GAS REPORTING AND ANALYSIS

Honeywell BW™ Flex can be paired with a smartphone easily via Bluetooth®. Download the Honeywell Safety Suite Device Configurator app for quick and precise device management, maintenance, reporting and analysis. Increase productivity by simplifying tasks like recording incidents and save time with one-click download for all instrument data.

FEATURES AND BENEFITS

• RELIABLE: Two months of battery runtime on a 4.5-hour charge with our new lowpowered IR LEL sensor. No daily charging, no unexpected downtime.
• COMPATIBLE: The Honeywell BW™ Flex Series is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite using Bluetooth® for wireless configuration.
• ACCURATE: Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
• EASY TO MANAGE: The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.
• RESPONSIVE: 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
• EASY TO USE: Small, lightweight and wearable. One-button operation.

Part Number: CPD-W6X1H1S3-Y-00

TPPLWAEA8SNBRT Touchpoint Plus Wireless Controller for up to 64 Wireless Channels, 900MHz, with AC Supply and Wall Mounted Enclosure - Supplied with 8x 4-20 mA Input, 12x Relays, Backup Battery and Modbus RTU and TCP - North America by RAE Systems

The Touchpoint™ Plus Wireless is a multi-channel controller with a built-in wireless modem that is designed for integration with RAE Systems by Honeywell Mesh-intelligent network of connected sensors combined with traditional hard wired sensors.

The Touchpoint™ Plus Wireless is the command-and-control element of the Mesh system that gathers data and monitors alarms from Mesh-enabled toxic and flammable gas monitors. The built-in wireless modem automatically links with Mesh-enabled monitors, and the controller has built-in security safeguards to resist tampering. The Touchpoint™ Plus Wireless does have additional 8 analogue 4-20 mA inputs for combination of traditional wired products and wireless products.

• Quick and easy installation
• Simple, intuitive operation
• Rugged and reliable
• Flexible to handle a variety of data processing and communication needs

Key Features

• Built-in wireless modemfor use in Mesh networks
• Manages up to 64 channels
• Up to 15 programmable SPDT relay outputs
• RS-485 and Ethernet interface
• 8 analogue 4-20 mA inputs
• Meteorological data sensors
• IP 65 rated

Easy to Use

• Backup battery for up to 12 hours of operation depending on configuration
• Built-in data logging
• C1D2 certified

Applications

• Drilling rigs
• Petrochemical plants
• Tank farms
• Shipyards and maritime
• Steel mills
• Industrial safety

W01B11010205607900 AreaRAE Plus Portable Gas Monitor, CSA / ISM 900MHz/ Mesh / PID ppm / LEL / O₂ / CO / H₂S by RAE Systems

AreaRAE Plus is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic chemicals, and meteorological factors that affect the speed and direction of the gas.

Whether you need to protect your community by monitoring a fence line, protect your employees during a maintenance turnaround, or protect your fire and hazmat team during emergency response, the AreaRAE Plus alerts you to threats with local audible and visual alarms. Plus, it works with Honeywell's remote monitoring software to give you a real-time view of threat readings from a safe location.

AreaRAE Plus delivers flexibility for your changing requirements:

Up to six 4R+ sensors for toxic and combustible gas.

Choose from a mix of up to 20 sensors based on your needs and switch them out whenever your needs change.

7R+ photoionization detector.

Monitor VOCs in parts per million, with built-in compensation for temperature and humidity.

Optional meteorological sensor for tracking toxic plumes.

Honeywell's compact RAEMet sensor sits at the top of the AreaRAE Plus and measures wind speed, wind direction, temperature and humidity. This information is then modeled in Honeywell's real time monitoring software which integrates the ALOHA hazard monitoring program.

Applications

• Industrial emergency response teams
• Maintenance turnarounds / Shutdowns
• Fence line monitoring
• Clearing a confined space for entry
• Wastewater pipeline rehabilitation
• Site remediation
• Fumigation, excavation and other environmental liabilities

Ease and Fexibility

• Available in Rapid Deployment Kit for quick threat assessment
• User-friendly interface; turn it on and go
• Flexible power options for short and long-term deployments
• Easy to hear and see, with 108-decibel alarm
• Easy USB connection to configuration software
• Built-in Mesh modem for short range comminution with RAE Systems wireless portable detectors.
• Easy USB connection to configuration software
• Device Management with Honeywell Sotera™

Remote Visibility on Threats

• Delivers real-time readings to Honeywell's remote monitoring software, so you can instantly determine the location and severity of a threat
• Map-based display is accessible from any computer with an internet connection or from our laptop as a turnkey host
• Enables coordination and data sharing in joint operations

CPD-W6X1S3M1-B-00 BW Flex Multi-Gas Detector, %LEL(F), Oxygen (O2), Sulfur Dioxide (SO2), Carbon Monoxide (CO), Black by BW Technologies

Whether you're protecting workers or first responders — in industries from steel and wastewater to paper and pulp — Honeywell BW™ Flex delivers the flexibility you need. Choose from more than 15 sensors to simultaneously detect up to 4 gas hazards.

REAL-TIME GAS READINGS AT A GLANCE

Honeywell BW™ Flex features a large high-resolution display with readings available in a wide range of languages. Vital safety information is conveyed clearly and effectively, enabling faster decision-making to protect lives in hazardous environments. Its innovative design, compact size and ease of use builds on the legacy of Honeywell BW™ gas detection products.

INTELLIGENT SENSORS FOR INCREASED SAFETY & UPTIME

Honeywell BW™ Flex incorporates i-Series intelligent sensors which monitor sensor status and provide advanced predictive calibration, maintenance and end-of-life information in real-time. These advanced alerts help reduce the likelihood of failure and increase awareness so preventive action can be taken to avoid safety incidents and unexpected downtime.

SIMPLIFIED GAS REPORTING AND ANALYSIS

Honeywell BW™ Flex can be paired with a smartphone easily via Bluetooth®. Download the Honeywell Safety Suite Device Configurator app for quick and precise device management, maintenance, reporting and analysis. Increase productivity by simplifying tasks like recording incidents and save time with one-click download for all instrument data.

FEATURES AND BENEFITS

• RELIABLE: Two months of battery runtime on a 4.5-hour charge with our new lowpowered IR LEL sensor. No daily charging, no unexpected downtime.
• COMPATIBLE: The Honeywell BW™ Flex Series is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite using Bluetooth® for wireless configuration.
• ACCURATE: Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
• EASY TO MANAGE: The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.
• RESPONSIVE: 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
• EASY TO USE: Small, lightweight and wearable. One-button operation.

Part Number: CPD-W6X1S3M1-B-00

1309A9063 E3SASCO 4-20MA 24VAC/DC W/CO by Honeywell Analytics

Toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line.

Product Overview:

E3Point is capable of detecting the widest range of toxic and combustible gases found in commercial building spaces and outbuildings, including CO, NO2, O2, H2, H2S, CH4 and C3H8. It can be used as a standalone unit with single or dual-gas detection (i.e. using a remote sensor) or deployed as a networkable device (interoperable with BACnet, Modbus or other Building Automation System): E3Point also functions with existing controller-based gas monitoring systems and wired-wireless gas monitoring system components.

E3Point uses Demand Control Ventilation—through relays, Building Automation System (BAS) or controller—to increase energy savings, extend fan life and align with green building best practices. In its network configuration, E3Point also optimizes HVAC, fire/smoke, surveillance and other building systems performance.

Intelligent product design reduces the unit's cost of ownership while increasing flexibility of application. Smart sensors are pre-calibrated, auto-configure upon set-up and operate continuously on patented Reflex© technology which continuously monitors sensor cell condition and alerts user to fault status. The plug-n-play sensor cartridge, user-friendly menu and wiring options simplify installation and maintenance, and reduce the cost of gas monitoring over the life of the unit.

Flexible Operation:

• Comes in standalone, standalone with remote (dual gas mode) or network versions
• Connects to analog or digital systems
• Works with virtually any BAS including BACnet and Modbus
• Connects to wired or wireless system (via 301CW wireless controller)
• Wall or duct mount
• Factory-calibrated cartridges

Cost Effective:

• Saves energy through Demand Control Ventilation (DCV)
• Simplifies installation/maintenance through plug-n-play sensor
• Remote sensor option provides dual gas monitoring (standalone version only)
• Optimizes BAS, fire, ventilation and other security systems

Versatile Communications:

• Works through BAS to improve fault diagnostics and collect data on gas concentration levels, sensor condition, etc.
• Couple with 301C to log data and daisy-chain up to 96 E3Point units

Advanced Sensing Technology:

• Detects CO, NO2, O2, H2, H2S, CH4, C3H8
• Advanced electrochemical (for toxic gases)and catalytic bead (for combustible gases) sensor performance
• Uses patented Reflex® and smart cartridge technologies

Electrical Certifications:

• US (ANSI/UL 61010-1)
• Canada (CSA C22.2 No. 61010-1)

Features & Benefits:

• Standalone, standalone with remote (dual gas mode) or network versions available
• Saves energy through Demand Control Ventilation

Quick Specs:

• Complete toxic and combustible gas detection system with onboard sounder
• Available in single point or dual gas options
• Analog 4-20 mA or Digital outputs (Bacnet, Modbus, and Lonworks)

D01-S00E-011 MeshGuard Stainless Steel Detector, Hydrogen Fluoride by RAE Systems

The RAE Systems by Honeywell MeshGuard gas detection monitor is a key building block of the MeshGuard intelligent network of connected sensors for gas detection in industrial safety and oil and gas applications.

The MeshGuard system is designed for quick deployment in areas where low cost/high ROI solutions are required. MeshGuard is available with field-replaceable precision sensors specifically designed to sense toxic and flammable gases.

Key Features

• Stainless Steel housing
• Self-forming wireless network; units come online automatically
• Compact and lightweight
• IP-65 rated weather resistant, and splash guard equipped for sensor protection
• Multiple controller options for realtime wireless data collection and viewing
• Self-healing network automatically routes data back to controller through best wireless path available
• Battery powered operation for up to 6 months
• SolarPak provides 24/7 uptime
• Intrinsically Safe
• Magnetic mounting option for quick and easy MeshGuard installation

Applications

• Oil and gas drilling operations
• Oil and gas production
• Plant maintenance turnarounds
• Industrial safety
• Tank farms
• Shipyards and maritime
• Fast deployment and decommissioning time
• Simple to install and operate
• Rugged and reliable
• Versatile to accommodate many applications

MeshGuard Detector Includes:

• MeshGuard detector with sensor as specified
• Operation and maintenance manual
• Calibration gas test adapter
• Enhanced-capacity Lithium battery installed
• Maintenance tool

W01A11010105607901 AreaRAE Pro Portable Gas Monitor, CSA / ISM 900MHz/ Mesh / PID ppb / LEL / O₂ / CO / H₂S / RAEMet by RAE Systems

AreaRAE Pro is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic compounds, radiation and meteorological factors. Whether you're carrying it into a hazmat response, setting up perimeter at a fire or protecting a public venue, the AreaRAE Pro works with Honeywell's remote monitoring software to give you a real-time view of threat readings so you can make real time decisions to ensure the safety of your teams and the general public.

AreaRAE Pro delivers maximum flexibility and versatility in one device:

Up to six 4R+ sensors for toxic and combustible gas.

AreaRAE Pro offers more than 20 interchangeable sensors that can be swapped at a moments notice to meet the changing needs of first responders.

7R+ photoionization detector.

Monitor VOCs in parts per billion, with built-in compensation for temperature and humidity.

Meteorological station for tracking toxic plumes.

Honeywell's compact RAEMet sensor sits at the top of the AreaRAE Pro and measures wind speed, wind direction, temperature and humidity. This information is then modeled in Honeywell's real time monitoring software which integrates the ALOHA hazard monitoring program.

Optional gamma sensor for radiation detection.

Detect and measure gamma radiation with increased sensitivity and faster response without using an additional sensor slot.

Applications

• First responders
• Hazmat
• Civil Defense & Military
• Public Venue Protection

Ease and Fexibility

• Available in Rapid Deployment Kit for quick threat assessment
• User-friendly interface; turn it on and go
• Supports long-distance remote monitoring
• Built-in mesh modem for short-range monitoring - no external router required
• Flexible power options for short and long-term deployments
• Easy to hear and see, with 108-decibel alarm
• Easy USB connection to configuration software
• Device Management with Honeywell Sotera™

Remote Visibility on Threats

• Delivers real-time readings to Honeywell's remote monitoring software, so you can instantly determine the location and severity of a threat
• Map-based display is accessible from any computer with an internet connection or from our laptop as a turnkey host
• Enables coordination and data sharing in joint operations