Testo

0563 8314 830-T4 IR Thermometer Kit with Surface Probe and Pouch with Belt Clip by Testo

This universal infrared thermometer is designed to perform fast and accurate surface temperature measurements in the HVAC area and industry. At a distance of 1 m the point diameter is only 3.6 cm. From a secure distance even smaller, difficult to access or dangerous targets can be measured without any problems. The new high resolution processor enables measurement results of unbelievable accuracy. And due to the min./max. function you can define your temperature limit values according to your needs. To control the limits with the help of an audible and visual alarm has never been easier.

Kit includes:

• Infrared thermometer with protective leather case
• Cross-band surface probe (0602 0393)
• Batteries
• Factory calibration certificate

• 30:1 optics for measuring temperature at a distance, even on small objects
• 2-point laser for spot sighting
• Display of current value and Hold value
• Emissivity determination with external temperature probe
• Audible and optical alarm when limit values are exceeded
• Fast measurement value recording at two measurements per second
• Display illumination
• °C contact measurement with connectable TC probe
• Input of upper and lower limit value

0555 6721 Dewpoint Switch (includes 0554 0647 sintered stainless steel fileter as standard) - 30 to + 30°C temperature pressure dewpoint (tpd) by Testo

The testo 6721 is a low-budget dewpoint guard with two switch contacts for controlling and monitoring refrigeration and adsorption dryers.

The continuous monitoring and control of compressed air dryers was up to now often not economically viable. The testo 6721 closes this gap. Whether integrated as a component in the dryer or pneumatic machine, or installed by the customer: With this compact solution, you increase the efficiency of your dryer. At the same time, you avoid follow-on damage to systems and products caused by excessive humidity in the compressed air.

• Measurement of dewpoints in the measuring range -45 to +30 °Ctd
• Inexpensive solution for monitoring cooling dryers
• Two switch outputs for monitoring limit values are available as outputs
• Long term stable and condensation-proof Testo humidity sensor (polymer sensor) guarantees highest process security
• P2A software for parameterization, adjustment and analysis saves time and costs in commissioning and maintenance
• Low-budget solution for monitoring refrigeration dryers
• Compact design allows easy integration into a refrigeration dryer or pneumatic machine
• Parameterization of unit and scale
• Setting 2 limit values and hysteresis
• testo 6721 adjustment: 1-point
• Reset to factory settings
• Testing of switch outputs
• Requesting of max./min. values
• Parameterization and adjustment history
• Serial number and firmware version can be called up

0563 2066 206 pH2 Starter Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH2 probe head for semisolid substances, incl. storage cap with gel
• TopSafe
• Belt/wall holder
• Aluminium case

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

0563 3371 70 330-1G Long Life Kit #1 - Residential Analyzer Kit (with case) by Testo

Thanks to the new instrument functions, the Testo flue gas analyzers of the new testo 330-LL series now offer you even more professional and reliable support.

Kit Includes:

• 0632 3306 00 - 330-1G LL Combustion Analyzer
• 0600 9763 - 12" flue gas probe, 1/4" dia., w/ 7' hose
• 0554 1096 - Power supply / recharger (North American cord)
• 0554 3385 - Particle filters - pack of 10
• 0516 3330 - Standard case

• Graphic processing of measurement data
• Instrument diagnosis function uses easy "traffic light" presentation to enable comprehensive instrument diagnosis
• Pressure measurement up to 300 mbar
• User-defined fuels
• TÜV-tested according to 1. BImSchV / EN 50379 Part 2 for O2, °C, hPa and CO with H2-compensation
• Powerful memory management: 500,000 readings
• IrDa/ Bluetooth interface for data transfer to Pocket-PC / laptop / printer
• USB interface for data readout to a PC software
• ZIV (Central Guild Association) driver for all standard industry software packages

0563 2062 206 pH2 Instrument Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH2 probe head for semi-solid substances, incl. storage cap with gel
• TopSafe
• Belt/wall holder

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

0563 2065 206 pH1 Starter Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH1 probe head for liquids, incl. storage cap with gel, calibration dosing bottles 250 ml pH 4 and 7
• TopSafe
• Belt/wall holder
• Aluminium case

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

6621 HVAC Temperature & Humidity Transmitter by Testo

A broad variety of the testo 6621 transmitter is available. Depending on the application in a room or in a duct, the corresponding designs can be selected. A display and an external probe are available as options. You can choose between the housing colours grey and white. The testo 6621 is persuasive in technical terms thanks to the patented humidity sensors that guarantee the highest accuracy. The sensors and the analog outputs can be adjusted, analyzed and parameterized via the external interface using the P2A software.

The testo 6621 is a high-performance transmitter for a low price. It meets the increasing requirements in automated building services in terms of accuracy, reliability and safety and thereby saves energy costs.

• Highly accurate testo humidity sensor with long-term stability (±2.0% RH)
• Optional 2-line LCD display
• P2A software for parameterization, adjustment and analysis, saves time and costs in commissioning and maintenance
• Optimum calibration concept thanks to adjustment of the entire signal chain (1-point, 2-point and analog adjustment)
• Adjustment without dismantling the transmitter
• 2 analog outputs (humidity/temperature), option of 1 passive humidity and temperature analog output

0563 3110 310 Residential Analyzer Kit with Printer by Testo

The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structure. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy even if you only have one hand free.

Kit Includes:

• testo 310 analyzer
• probe & hose
• silicon tubing
• extra particulate filters (5)
• pressure plugs (5)
• AC power supply/recharger (USB)
• calibraton certificate
• IR printer
• 2 rolls of thermal paper
• hard case

• Robust and light instrument for daily use
• 30 seconds sensor zeroing
• O2 and CO measurement
• Integrated magnets for easy fixing to burner

Applications:

• Flue gas measurement
• Draught measurement
• Ambient CO measurement
• Pressure measurement

0563 2061 206 pH1 Instrument Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• Protection class IP68, incl. storage cap with gel
• TopSafe
• Belt/wall holder

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

0560 0540 540 Pocket Pro Light Meter by Testo

The sensor of the testo 540 is adapted to the spectral sensitivity of the eye. This makes testo ideal for the measurement of light intensity. The Hold function allows an easy readout of the measurement values. Max. and min. values are displayed at the press of a button. testo 540 is very handy, small and easy to operate.

• Hold function and max./min. values
• Incl. calibration protocol
• Protective cap for safe storage
• Including wrist strap and belt holder
• Sensor adapted to spectral sensitivity of the eye
• Display light

0563 2052 205 Starter Kit by Testo

The testo 205 is a robust food penetration measuring instrument for temperature and pH values, with automatic temperature compensation. The robust penetration measurement tip is exchangeable and insenstitive to dirt thanks to the hole diaphragm.

The instrument is especially well suited to pH measurements in semi-solid media such as meat. The storage cap filled with electrolyte gel is used for storing the probe between measurements.

Kit includes:

• One-hand pH/°C measuring instrument
• Penetration probe
• Storage cap
• Gel and calibration bottles 250 ml pH 4+7
• Belt/wall holder
• Aluminium case

• pH tip embedded in breakage-proof plastic
• Combined penetration tip with temperature probe
• Maintenance-free gel electrolyte
• Measurement tip exchangeable by user
• Automatic final value recognition (auto-hold)
• 2-line, illuminated display
• 1, 2 or 3 point calibration possible

0563 5703 570-1 Refrigeration System Analyzer (RSA) Kit by Testo

Your toolcase is probably heavy, and filled with many useful helpers for your daily work. In the future, the new testo 570 will replace several of these tools. Because it is the robust expert for all imaginable measurements on a refrigeration system or heat pump with one instrument. Whether for pressure, temperature or current, you benefit from the extensive analysis possibilities and numerous technical features for all measurement tasks on a system. The testo 570-1 set contains one clamp probe, a calibration protocol and batteries.

One instrument, multiple benefits

The digital manifold testo 570 offers you all you need for your work on refrigeration systems and heat pumps. The internal data store of the testo 570 replaces manual work steps, thanks to the clear and easily understood documentation option of a measurement. Carry out long-term measurements or record data in real time, and present them graphically. The easy operation of testo 570 makes this possible. Apart from this, errors can be found and rectified more quickly in cases of malfunction. Manual documentation is a thing of the past. Measurement results can be traced, and reports called up, at any time.

Kits includes:

• 570 Refrigeration System Analyzer
• 0613 5505 - 2 Clamp probes (NTC)
• 0449 0047 - USB cable
• 0516 5700 - Hard carry case

• 4-way valve block with 4 connections, 4 hose parkers and sight glass
• Integrated vacuum measurement supports evacuation of the system
• Heat pump mode and display of high and low pressure as well as temperature
• Temperature-compensated tightness testing
• Additional calculation of superheating and subcooling
• Computer-supported monitoring of a system with up to 999h of measurement value recording
• EasyKool software with extended features
• Refrigerant management and administration of exact filling levels
• 40 refrigerants stored

0563 3371 70 330-1G Long Life Kit #2 - Residential Analyzer Kit (with case & printer) by Testo

Thanks to the new instrument functions, the Testo flue gas analyzers of the new testo 330-LL series now offer you even more professional and reliable support.

Kit Includes:

• 0632 3306 00 - 330-1G LL Combustion Analyzer
• 0600 9763 - 12" flue gas probe, 1/4" dia., w/ 7' hose
• 0554 1096 - Power supply / recharger (North American cord)
• 0554 0549 - Fast IR printer
• 0554 0568 - Thermal printer paper - 6 rolls (10 year legibility)
• 0554 3385 - Particle filters - pack of 10
• 0516 3330 - Standard case

• Graphic processing of measurement data
• Instrument diagnosis function uses easy "traffic light" presentation to enable comprehensive instrument diagnosis
• Pressure measurement up to 300 mbar
• User-defined fuels
• TÜV-tested according to 1. BImSchV / EN 50379 Part 2 for O2, °C, hPa and CO with H2-compensation
• Powerful memory management: 500,000 readings
• IrDa/ Bluetooth interface for data transfer to Pocket-PC / laptop / printer
• USB interface for data readout to a PC software
• ZIV (Central Guild Association) driver for all standard industry software packages

0563 2063 206 pH3 Instrument Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH3 probe head with BNC interface
• TopSafe
• Belt/wall holder

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

0563 8312 830-T2 IR Thermometer Kit with Surface Probe and Pouch with Belt Clip by Testo

The testo 830 is a universally applicable infrared thermometer for non-contact measurement of surface temperatures in trade and industry. Thanks to a new processor, and therefore better resolution, even more precise measurements are now possible. Temperature can now be recorded to an accuracy of 0.1 °C. Thanks to the min./max. function, the limit values of the last measurement can be displayed and even better monitored.

Kit includes:

• Infrared thermometer with protective leather case
• Cross-band surface probe (0602 0393)
• Batteries
• Factory calibration certificate

• 10:1 focus
• Backlit display
• Audible/visual alarm
• Emissivity adjustable from 0.2 to 1.0
• Fast readings
• Laser sighting
• Adjustable alarm limits
• Audible and visual alarm if limits are exceeded
• User-friendly thanks to "pistol design"
• Backlit display
• Adjustable emission factor (0.1 to 1.0)
• Display of current value and Hold value

0563 2305 230 pH Meter Set by Testo

The testo 230 combines a complete pH measuring instrument and a full-value temperature measuring instrument in one compact splashproof housing. It reliably records pH values, reduction voltages and temperature in watery solutions as well as in semi-solid to solid media.

The instrument has an automatic temperature compensation, and can be calibrated with standard as well as DIN buffers in the pH area. Thanks to the possibility of connecting different pH probes, the testo 230 is universally applicable, not only for applications in the pharmaceutical industry, but also in the food sector and the field of HVAC.

Kit includes:

• Analysis instrument
• 2 electrode clips and battery
• Testo buffer set pH 4 7.50ml each
• Universal plastic electrode with temperature sensor plastic set case
• Batteries

• Measurement of pH and temperature in one instrument
• Display of calibration data and error reports
• Robust and splashproof according to protection class IP54
• Easily legible, 2-line display
• 1, 2, or 3-point calibration possible

0563 2051 205 Instrument Kit by Testo

The testo 205 is a robust food penetration measuring instrument for temperature and pH values, with automatic temperature compensation. The robust penetration measurement tip is exchangeable and insenstitive to dirt thanks to the hole diaphragm.

The instrument is especially well suited to pH measurements in semi-solid media such as meat. The storage cap filled with electrolyte gel is used for storing the probe between measurements.

Kit includes:

• One-hand pH/°C measuring instrument
• Penetration probe
• Storage cap
• Belt/wall holder

• pH tip embedded in breakage-proof plastic
• Combined penetration tip with temperature probe
• Maintenance-free gel electrolyte
• Measurement tip exchangeable by user
• Automatic final value recognition (auto-hold)
• 2-line, illuminated display
• 1, 2 or 3 point calibration possible