Testo

0560 9250 925 Type K Thermometer by Testo

The one channel temperature measuring instrument for connection to reliable, fast-action thermocouple probes. An additional temperature probe can be displayed in testo 925; data is transmitted by radio, i.e. wirelessly. An audible alarm sounds if limit values are exceeded. Current measurement data as well as max/min data can be printed on site on the Testo fast printer.

• 1 channel measuring instrument with optional radio probe
• Wide range of probes
• Continuous display of max/min values
• Hold button to freeze reading
• TopSafe, indestructible case, protects from dirt and impact (option)
• Display light
• Special probes for industrial kitchen sector
• An audible alarm sounds when limit values are exceeded

Measuring Range: -200 to 40°C

Measuring Range: -20 to +70°C
Measuring Range: 0 to +100 %RH

6381 Differential Pressure Transmitter with optional T/RH- standard housing metal by Testo

The differential pressure transmitter testo 6381 was developed specially for monitoring differential pressure in the measuring range from 10 Pa to 1000 hPa. In cleanroom technology, the maintenance of positive pressure prevents the entry of contaminated air. In addition to this, the flow velocity or the volume flow can be calculated from the measurement of the differential pressure in a Pitot tube. Thanks to an optional probe from the probe series 6610, the additional recording of humidity and temperature with one instrument is also possible.

The testo 6381 is particularly outstanding thanks to the automatioc zero-point adjustment which ensures high accuracy and long-term stability.

The integrated self-monitoring and early warning function also guarantees the operator high system availability.

• Measurement of differential pressure, flow velocity, volume flow; optional: humidity and temperature
• Automatic zero-point adjustment guarantees high, temperature-independent accuracy and long-term stability
• Low measurement range up to 10 Pa ensures very high precision at lowest pressures
• Ethernet, relay and analog outputs allow optimum integration into individual automation systems
• The P2A software for parameterization, adjustment and analysis saves time and costs in commissioning and maintenance
• Configurable alarm management with adjustable response delay and alarm acknowledgement

0554 0549 Fast IR Printer by Testo

The universal printer with IRDA and infrared interface saves you time since it stores the print data prior to printing. Data transfer is completed within 2 seconds. The instrument is then immediately ready for operation. The readings are saved black on white with date and time.

• System compatibility with other Testo measuring instruments (also downward compatibility)
• Fast data transfer, the measuring instrument is ready for use again within 2 sec.
• Fast print function thanks to newest line printer
• Energy-saving Auto-off/Wake-up function
• Testo design with integrated magnetic plate
• Robust housing (adapted to testo 327)
• Mains operation possible (same mains unit as for testo 327/330)

0560 5281 526-2 Differential Pressure Meter (0 to 2000hPa/ 29psi, 0.05% acc.) by Testo

testo 526 is the differential pressure meter for industrial applications. Critical processes can be measured and monitored highly efficiently with an accuracy of up to 0.05% of the full-scale value.

• Temp. compensated differential pressure sensor 0 to 2000 hPa built into instrument
• Available in 2 accuracy classes: 0.1%/0.05% of full-scale value
• Measures leakage rate (drop in pressure per time)
• Checks drop in pressure in containers, cables etc. via the built-in test menu
• 2 probe sockets to connect additional probes for measuring pressure, temperature, current/voltage

0560 5350 535 Ambient CO2 Meter by Testo

testo 535, the efficient CO2 measuring instrument for measuring indoor air quality. Bad air quality in rooms can lead to tiredness, lack of concentration and illness (Sick Building Syndrome) due to high CO2 concentration (greater than 1000 ppm)

• Long-term monitoring based on maximum and mean calculation
• Long-term stable 2 channel infrared sensor
• Highly accurate, highly efficient
• Repeated calibration is unnecessary

0699 6446/14 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

Measuring Range: -60 to 1000°C

0699 6447/6 6447 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0563 7352 735-2 Compact Pro Thermometer with Memory & Software by Testo

The robust and compact measuring instrument with a probe socket for highly accurate Pt100 probes and two sockets for fast-action thermocouple probes. Readings from up to three additional temperature probes can be displayed in the testo 735-2 measuring instrument's clear display; data transmission is by radio, i.e. wireless. The measurement values can be simultaneously transferred to a PC and stored there. In this way, a total of 6 channels is recorded by the measuring instrument. A system accuracy of 0.05 °C with a resolution of 0.001 °C is reached using the plug-in highly accurate Pt100 immersion/penetration probe. The measuring instrument is therefore ideally suited for use as a working standard. Temperature characteristics are recorded in the instrument and then analysed in graphics and tables on your PC/Notebook. Data is printed on site on the Testo fast printer using infrared. Selectable user profiles, i.e. allocation of specific function buttons to an application facilitate intuitive and fast operation. Individual protocols or measurement series can be stored according to site. Up to 99 sites can be stored in the instrument. The storage cycle is user-defined between 0.5 seconds and 24 hours.

• System accuracy up to 0.05 °C
• Instrument memory for up to 10,000 readings
• PC software for filing, analysing and documenting measurement data (included)
• Displays, saves and prints Delta T, min, max and mean values
• Audible alarm if limit values are exceeded
• Protection class IP65
• Instrument memory for 10,000 readings (testo 735-2)
• PC software for filing and documenting measurement data (testo 735-2)
• Freely selectable storage cycle from 1 second to 24 hours
• Accuracy over the entire measurement range thanks to system adjustment
• The measurement values can be displayed in the instrument and simultaneously transferred to a PC and stored (testo 735-2)

0555 6442 Compressed Air Flow Transmitter (1" line) by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. Using the compressed air counters testo 6441 to testo 6444, transparency of consumption is created for compressed air, similarly as for the media current, water or gas, thus increasing the motivation of those responsible for the process regarding cost reduction measures and energy savings. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop. While the thermal, glass-coated ceramic sensor offers a high level of robustness and fast response times, the integrated inflow and outflow pipes ensure optimum accuracy.

• Measurement of norm volume flow in the measuring range 0.25 to 700 m³/h (DN15 to DN50 or 1/2"-2"); consumption quantity in m³; media temperature in °C
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display

0699 6445 1 6445-1 Flowmeter - Totalizer 80m/sec by Testo

• Calibrated to air speed in m/s (calculates the volumetric flow rate Nm³/h if the diameter is entered)
• Choice of measuring range: up to 80 Nm/s or up to 150 Nm/s
• Bar probe design: versatile use for diameters from DN 50 to DN 300
• Output signals: Analog output: 4 to 20 mA (4-wire), Pulse output, RS232 digital output
• Including 5-point calibration certificate
• Robust, thermal silicon chip sensor
• Optional display: Totalizer function (sum display)/speed display/physical units (including volumetric glow rate Nm³/h) can be selected via software

Measuring Range: -200 to +1000°C