Temperature Probe

0632 1552 CO2 Probe includes Temperature and Humidity Sensor, Fixed Cable by Testo

Use the probe with the compatible testo multifunction measuring instrument (please order separately) to determine CO₂ concentration, air humidity and air temperature. Wet bulb temperature, dew point and absolute humidity are calculated at the same time.

CO₂ probe including temperature and humidity sensor - features

Use the probe to check the indoor climate, for example in offices, production areas or storage facilities. To ensure accurate measurement results, air density compensation is carried out via the integrated absolute pressure measurement.

Use the fixed cable on the handle to connect the CO₂ probe to the measuring instrument (please order separately).

Particularly useful: store individual readings directly in the measuring instrument by pressing the button on the probe. The clearly structured measurement menu for long-term measurement enables the measuring instrument to be operated intuitively. Reading trends are reliably recorded thanks to the convenient input of measurement time and measuring cycle. You can use these trends to evaluate changes in the indoor air quality.

Space-saving: more applications, less equipment

Endlessly versatile: a universal handle can be connected to all probe heads - so you can master more applications using less equipment and save space.

Order the Bluetooth® handle to make it more convenient to carry out your measurement and guarantee less cable clutter in the case. This transmits the readings to the measuring instrument from a distance of up to 20 metres. If the sensors (CO₂, humidity, temperature) need to be replaced in the distant future, you can change the probe head.

Intelligent calibration concept

You will get exceptionally accurate measurement results with the digital probe, because the measuring instrument makes measurement uncertainty a thing of the past. You only need to send the probe head in for calibration - so the measuring instrument remains in continuous use.

Areas of application for the CO₂ probe

Use the CO₂ probe including temperature and humidity sensor to check the indoor climate (indoor air quality), e.g. in offices, production areas or storage facilities.

The CO₂ concentration is a primary indicator of indoor air quality. Poor air quality due to excessive CO₂ concentration results in tiredness and lack of concentration, and can even cause illnesses. The CO₂ concentration should therefore not normally exceed 1,000 ppm.

• Intuitive: clearly structured measurement menu for long-term measurement and parallel determination of CO₂ concentration, humidity and air temperature in indoor areas
• Precise: calculation of wet bulb temperature, dew point and absolute humidity
• Convenient: a universal handle can easily be connected to other probe heads
• Intelligent calibration concept

Includes:

CO₂ probe including temperature and humidity sensor (consisting of CO₂ probe head and cable handle (cable length 1.4 m); 4 x AA batteries, table stand and calibration protocol.

08113-31 High Temperature Thermocouple Probe, Fiberglass Insulated Wire, 20G, Exposed, Stripped Leads, Type K; 120" L by Digi-Sense

Fiberglass wire is not recommended for use in moist or wet environments.

Exposed-junction probes are not recommended for use with aqueous solutions.

Do not subject type J exposed-junction probes to moisture as they will rust

• Response Time: 1 seconds or greater
• All insulated-wire probes include straight insulated cable with no handle and stripped leads.
• Custom designs or changes to this product are available upon request

90446-34 Temperature Probe, Type J, 6" L, 1/8" Dia, Fiberglass, Stripped Leads, 1/8" Comp by Digi-Sense

Magnesium Oxide insulated thermocouples, commonly referred to as MgO thermocouples, are used in many process and laboratory applications. Many desirable characteristics make them an excellent choice for general and special purpose applications. They are available in all thermocouple element types, single or dual elements, a wide variety of sheath diameters / materials, rugged in nature, bendable, and have fairly high temperature ratings.

• 316 stainless steel sheath

GND-25 1/4" I.D. Probe Gland (temperature probes) by Agrowtek

Probe glands allow installation of pH, ORP, EC and temperature probes directly inline with pump feeds or a dedicated recirculating pump loop. Inline installation extends probe life by washing away debris and keeping probes clean. Increased accuracy also results from recirculation of liquid to provide a more homogenous mixture.

• 1/2" NPT Male Pipe Thread
• Nylon body

18526-24 Type J Economic Bolt On Thermocouple Probe #8 Screw 12" Fiberglass Ext. Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Available in #6 (M3.5) or #8 (M4) screw sizes and different lead lenghts
• Response Time: 2-4 seconds or greater
• Each probe comes with a color coded ANSI mini connector or stripped leads: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

90446-33 Temperature Probe, Type J, 10" L, 1/8" Dia, Fiberglass, Leads by Digi-Sense

Magnesium Oxide insulated thermocouples, commonly referred to as MgO thermocouples, are used in many process and laboratory applications. Many desirable characteristics make them an excellent choice for general and special purpose applications. They are available in all thermocouple element types, single or dual elements, a wide variety of sheath diameters / materials, rugged in nature, bendable, and have fairly high temperature ratings.

• 316 stainless steel sheath

Temperature: -100°C ~ +400°C OR -148°F ~ +752°F

Temperature: -100°C ~ +400°C OR -148°F ~ +752°F