ScichemTech

SCT-108.002.47 SCT QIANA UV-C Meter by ScichemTech

Includes:

• Sensor Probe
• User Manual
• Color Box
• Hard Carrying Case
• 9V Battery

Features:

• A complete portable SCT meter for intensity of ultra violet rays measurement (UV-A, C+AB)
• Backlight LCD and 4 digits dual display
• High and low measurements
• Range in a unit MW/cm2 or UW/cm2
• Socket of tripod mounting
• Automatic measuring
• Magnetic mount
• 20 points memory
• Battery operated with low battery indication.

SCT-108.003.A4 Plastic Three-In-One Combination pH Electrode by ScichemTech

• Plastic three-in-one combination pH electrode
• Simultaneous measurement of pH and temperature
• Automatic temperature compensation
• BNC + RCA plugs

SCT-108.002.48 SCT RICKY UV-AB Meter by ScichemTech

Includes:

• Sensor Probe
• User Manual
• Color Box
• Hard Carrying Case
• 9V Battery

Features:

• A complete portable SCT meter for intensity of ultra violet rays measurement (UV-A, C+AB)
• Backlight LCD and 4 digits dual display
• High and low measurements
• Range in a unit MW/cm2 or UW/cm2
• Socket of tripod mounting
• Automatic measuring
• Magnetic mount
• 20 points memory
• Battery operated with low battery indication.

SCT-108.002.08 SCT CADE Conductivity/TDS/Salinity/Resistivity/DO/Temp Meter by ScichemTech

Includes:

• Plastic conductivity electrode
• DO electrode
• 1413us/cm conductivity standard solution
• Membrane cap (DO electrode use)
• DO electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for conductivity and dissolved oxygen measurements.
• Double-parameter meter equipped with conductivity electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, automatic power-off and low voltage display.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

Length(MM) & Diameter : 225 X Ø16.00
Temperature: -100°C ~ +400°C OR -148°F ~ +752°F

SCT-108.001.32 SCT-THER-PEN-3 Waterproof Digital Pocket Multi-Stem Thermometer by ScichemTech

Features:

• Reliable SCT - Waterproof Tester for Temperature measurement.
• Good - Temperature - max/min range.
• Option to select °F/°C.
• Option to select test / hold date.
• Sensing time 1 second.
• Stainless steel 133 mm probe.
• Protective plastic sleeve with clip for stainless steel.
• Battery operated with low battery indicator.

SCT-108.001.30 SCT-THER-PEN-1 LCD Digital Multi-Thermometer by ScichemTech

Features:

• Reliable SCT Tester for Temperature measurement.
• Small design and display.
• Option to select °F/°C.
• Option to hold / test data.
• Auto shut-off in 60 minutes.
• Sensing time 1 second .
• 133mm. Stainless steel sensor probe protective plastic sleeve with clip.
• Battery operated with low battery indicator.

SCT-108.004.03 SCT SEDIMENT-3 Portable & Automated Silt Density Index Meter 220VAC by ScichemTech

Includes:

• Power Supply
• Battery Charger
• Accessory Case
• Pack of 100 each
• .45 micron 47 mm membrane filters
• Special Tweezers for handling of the membranes
• A 50 micron pre-filter

Features:

• Performs SDI 5, 10 and 15 minute tests with both 100 ml and 500 ml sample size tests provides useful data that s impossible to obtain with the manual method. Especially helpful on high SDI waters.
• Unattended operation. Start the test and return in 15 minutes for the results saves you time.
• Real-time display of results including SDI, current flow rate and elapsed time. End of test display includes SDI 5,10 & 15 with 100 ml and 500 ml results.
• More accurate than hand testing (ASTM D 4189-95) - consistent results provides better information.
• Battery powered for true portability conduct tests anywhere.
• Uses standard 47 mm membrane filters for lower consumable cost and worldwide availability

SCT-108.002.25 SCT LUCKY Lux Meter by ScichemTech

Includes:

• Battery
• Carrying Case

Features:

• A complete portable SCT meter for intensity of light measurements.
• Good design with high precision.
• Measuring intensities of illumination in lux or foot candles.
• Measuring lights source includes all visible.
• Multi-function for data hold, max. And zero adjustment.
• Cosine angular corrected.
• Battery operated.

Probe: 213 x ø3.5
Probe Head: 40mm x 5.5mm
Temperature: -100°C ~ +300°C or -148°F ~ +572°F

Length(MM) & Diameter : 265 X Ø8.00
Temperature: -100°C ~ +400°C OR -148°F ~ +752°F

SCT-108.001.22 SCT-THYG-PEN-2 Handheld LCD Digital Moving Head Thermo Hygrometer by ScichemTech

Features:

• Reliable SCT Tester for Humidity and Temperature measurements.
• Ergonomic Head moving design.
• Humidity / Temperature Dual Display.
• Option to select °F/°C.
• Memory recalling.
• 133 mm Probe.
• Good measuring range.
• Battery operated.

Length(MM) & Diameter : 148 X Ø4
Temperature: -100°C ~ +300°C OR -148°F ~ +572°F

SCT-108.003.03 SCT BE-pH-3 Benchtop pH/ORP/Temp Meter by ScichemTech

SCT basic benchtop ph/ORP/temp meter with ATC and with RS232 suitable for general pH measurement in laboratory.

Equipped with plastic 3 in 1 pH combination electrode and stirring type electrode holder easier to use.

Automatic calibration, automatic temperature compensation Instrument with pH resolution 0.01.

Includes:

• Plastic pH combination electrode
• Temperature electrode
• pH 4.00,7.00,10.01 (50 ml) standard solution
• 9V power adapter
• Stirring type electrode holder
• pH link communication software
• RS232 communication cable
• Operation manual.

Features:

• SCT benchtop meter is designed to measure pH/ORP/temperature.
• Large LCD with blue background can display both pH and temperature value at the same time.
• It has intelligent functions for automatic calibration, automatic temperature compensation, data storage/recall, and memory max. and min. value etc.
• 1~3 point automatic calibration, and it can automatically display the percentage of slope after finishing calibration
• Equips tempearature electrode and stirring type electrode holder, which is more suitable for using.
• °C and °F can be switched freely.
• SCT benchtop meter meets: ISO9001 & CE standards

Length(MM) & Diameter : 265 X Ø18.00
Temperature: -100°C ~ +400°C OR -148°F ~ +752°F

SCT-108.002.12 SCT CHRIS Water Hardness Meter by ScichemTech

Includes:

• Water hardness electrode (with two measuring heads and one screw plug)
• Cell (1.5v)
• 100ml hardness calibration solution (B1, B2 and B3)
• 20ml test cup
• Test cup pedestal
• Reference solution
• Tools for filling reference solution
• Carrying case
• Operation manual

Features:

• A complete portable SCT-meter for calcium and magnesium, ions hardness measurements.
• Portable meter for measurement of water hardness (the total concentration of calcium ion and magnesium ion).
• Electrode adopts water hardness combination electrode with patent structure. It consists of measurement electrode, reference electrode and temperature probe. Replaceable measuring head, steady potential, fast response, easy to use.
• Meter adopts intelligent chip design, automatic calibration, automatic temperature compensation, time display, data storage, low voltage display, etc.
• Ability to switch among eight units: MMOL/L, MG/L (CACO3), MG/L (CAO), MMOL/L (Boiler), MG/L (CA). Three options of three units: ºFH France ºDH Germany and ºEH, UK from WH-link communication software.
• Equipped with B1, B2 and B3 calibration solution.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.