All Products

WD-35607-53 Conductivity/TDS Cell, Glass Body, K=10 (Use with CON 100, 200, and 500 meters) by Oakton

Feature built-in temperature compensation

Each conductivity/TDS cell features a 3-ft cable and a two-band platinum sensor. Epoxy body cells have a temperature range of 0 to 80°C; glass and stainless steel body cells have a temperature range of 0 to 100°C.

• Epoxy, glass and stainless steel models available

Choose from three different cell constants.

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS).
• K = 0.1 for low conductivity measurements (near or below 20 µS)

1450-401R-3X 3 Unit DS401 Docking Station System by GfG

Easy operation

The operation of the DS400 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS400 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS400 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS400 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS400 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS400 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS400 is the right choice.

The DS400 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS400 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS400 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

The DS400 software includes a module to quickly print official calibration or bump test certificates. Simply download the records from the DS400 and start the "Certificate Generator" it takes only seconds!

Features

• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Cascade multiple docking stations
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates

Features

• Single gas inlet
• Single cradle
• Base plate
• Unit-to-unit power adapters
• Ethernet cables
• Standard accessories
• One demand flow regulator (DFR)

72-0008RK-01 OX-01 Single Gas Personal Monitor, 0-40% O2 with Alkaline and Alligator Clip by RKI Instruments

Certain working environments cannot avoid the potentially unsafe and hazardous conditions. In those situations, it is imperative that employees be equipped with the very best in workplace safety. The types of dangers resulting from hazardous conditions are vast, and the presence of dangerous gases can result in a number of undesirable outcomes such as asphyxia, fire or explosions, spontaneous combustion, and on a smaller scale, damage to the human body or equipment. Using state of the art gas detection technology, RKI Instruments developed the Single Gas Clip-On Personal Monitor to detect nearby atmospheric hazards and alert users in a quick and timely manner.

Single Gas Clip-On Personal Monitor

The Single Gas Clip-On Personal Monitor by RKI Instruments is a top of the line gas detection system that clips easily into place on a belt, pocket, helmet, or shirt. Its sensor detects the presence of four gases (oxygen, carbon monoxide, hydrogen sulfide, and combustible gas) and immediately alerts the user and those nearby. The device is small enough to be highly portable and is available at a very affordable price.

The Single Gas Clip-On Personal Monitor is available in four different models, each of which have been deemed safe for workplace use by CSA to U.S. and Canadian Standards for Class I, Division I, Groups A, B, C, and D atmospheres.

Triple Alarm System

When potentially hazardous atmospheric conditions have been detected, the Single Gas Clip-On Personal Monitor will activate its triple alarm system. The triple alarm is designed to alert the user and everyone within the vicinity. Once the alarm is activated, the backlight will turn on, the LED lights will flash, the audible alert will initiative, and the device will being to vibrate. The triple system is designed to be noticeable during a variety of working conditions when a user may not have full use of senses.

In addition to hazardous atmospheric conditions, the device will alert users when the battery is low, the sensors are malfunctioning, and more.

Specifications

The Single Gas Clip-On Personal Monitor has a response time of 20 seconds for oxygen levels and 30 seconds for carbon monoxide, hydrogen sulfide, and combustible gas. The unit is powered by alkaline dry cell batteries (2 AAA batteries) with a battery life of over 3,000 hours (except model GP-01 which has a battery life of 16 hours). The unit is also equipped with a Peak hold function and STEL & TWA function. Its pocket size dimensions (1.4 W x 4.1 H x 0.8 D) and light weight (3.5 ounces) renders the device highly portable.

Accessories

The Single Gas Clip-On Personal Monitor is compatible with a number of accessories that help to customize the unit to meet a specific workplace's needs. The unit comes standard with rubber protective boots, alkaline batteries, belt clip or alligator clip, and wrist strap. Optional accessories can also be purchased such as a calibration cap, calibration kit, charger unit, and battery pack.

*Please note we can only ship RKI products to customers within the United States

Part Number: X1053250PA

18100060-2 Gasbadge Pro Single Gas Monitor, H2S by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

DP-BUAGCNCS-F007-A Detective + Transportable Area Monitor, 4 Gas - PROP % LEL, O2, H2S, CO (H2 filtered), Non-pumped, Extended Battery with Rigid Legs DUTCH ATEX by Crowcon

Detective+ is a multi-gas temporary area monitor for use in turnaround/shutdown procedures, hotwork maintenance, confined space entry work and many other utility, construction and oil and gas industry applications. Go solo or link together using Detective Net or cables to form a perimeter, Detective+ gives a loud and clear alarm providing effective warning of gas hazards. The rugged, water and impact resistant design make Detective+ the ideal choice for your transportable gas detection needs.

Versatile and user friendly

• Infrared sensors available - Allows sampling of highly flammable gas levels and carbon dioxide Unaffected by poisoning and has a very fast response time
• Built in pump option - Provides sampling versatility
• Built-in display - Provides clear information, allows identification of gas hazard

Rugged, tripod design

• Raised sensor apertures - Prevents water ingress
• Triple leg design - Increases unit physical visibility and is the perfect height to allow 360 gas inlet
• Folding leg option - Allows stacking for easier storage and transportation
• IP65 specifications - Provides excellent sensor protection for use in challenging environments

Loud and clear alarms

• Network ready - Detective NET 25 units: 25 units can be networked together forming effective perimeter defence. When one alarms, all units on the network alarm. Detective+ with cables 12 units
• Intelligent & flexible - Units on the network can be placed up to 100m from each other. When in alarm the unit which triggered the alarm flashes faster than the others
• Audible and visible confidence blip - Provides guarantee to the user that the unit is functioning properly and that they are protected
• High visibilty - Vivid red LED clusters combine with an extra loud siren to give very clear alarm notifications
• Multiple beacons - Ensures 360° visibility

10178357 Altair 4XR Multigas Detector: LEL, O2, H2S & CO with 4-gas Cylinder, Regulator & ALTAIR Pump Probe by MSA

Outfitted with rapid-response MSA XCell® sensors, the ALTAIR 4XR Gas Detector is the toughest 4-gas monitor on the market and is backed by a 4-year warranty. The ALTAIR 4XR can also provide real-time incident awareness to team members, supervisors, safety managers and others when paired with the MSA ALTAIR Connect app via a Bluetooth® wireless connection.

Real-time

• Sense gas 2 times faster than the industry average with our XCell sensors
• Quickly update MSA ALTAIR 4XR settings via the ALTAIR Connect app (available on the Google Play Store)
• Send event notifications via text message with the ALTAIR Connect app

Rugged

• Survives 25 drops from 4 feet (1.2 meters) (MIL-STD-810G drop protection)
• Can survive an incidental 25-foot (7.5-m) drop onto concrete
• Dust- and waterproof IP68 rating (2 meters for at least 1 hour)
• Operating temperature range: -40°F to +140°F (-40°C to +60°C)

Reliable

• 4-year instrument & sensor warranty
• Confirm compliance quickly with the Bump LED & on-screen checkmark
• Bump and calibrate with 1/2 the test gas and in 1/2 the time vs. industry average
• Bump and calibrate at a specified "Time of Day" with your MSA GALAXY® GX2 Automated Test System
• MotionAlert option tells others that user has become immobile
• User-activated InstantAlert notifies others of a potentially dangerous situation

4021-DPX-PR-420-H RAM 4021 Respiratory Air Monitor, Carbon Monoxide (CO) and Dew Point with Power Relay 4-20 mA output, Low H2 Interference CO Sensor by GfG

The RAM 4021 AutoCal® series is the unit of choice where specific and accurate measurement of carbon monoxide, oxygen or dew-point levels are required. Designed to meet OSHA requirements for monitoring of Grade D respirable air, this unit is equipped with a reliable electrochemical sensor that accurately indicates the level of carbon monoxide on an illuminated liquid crystal display. Adding versatility, this unit offers optional oxygen or dew point sensors for applications where detection or measurement is needed.

Calibration and maintenance are simple with our innovative AutoCal® system. Additional features including alarm relay contacts, user adjustable alarm point, low flow alarm indicator and many more make this unit an intelligent choice. The RAM 4021 is available in four models, the 4021 (CO), 4021-1 (CO and O2), 4021-DPX (CO and dew point levels) and 4021-PR (CO and additional relay to signal power loss to monitor, complies with newest NFPA regulation). All models may be purchased with or without airline filter systems

Respiratory air specifications

All GfG Instrumentation RAM Instruments satisfy the requirements of OSHA rule 29 CFR 1910.134 (d) (2) (ii) for carbon monoxide monitoring. They will also monitor Grade E air, generally specified for breathing air in cylinders (SCBA).

Wall mounted filter panel option

The 25, 50 and 100 CFM panels filter out dangerous toxins from supplied air sources and ensure clean, breathable air. The threestage filter system efficiently removes particulates, oil vapors and hydrocarbons from an air supply. After filtration, the regulator sets the pressure for the respiratory equipment and the manifold assembly provides multiple outlets for airline hose quick connections. The model 8025 panel includes two user female quick connect outlets; the 8050 includes four, and the 8100 includes eight. A 1/2" FPT connection is standard on all 50 and 100 CFM panels, and a 3/8" FPT connection is standard on all 25 CFM panels.

Features

• Continuous compressed air CO monitor
• Integrated dew point measurement
• Robust easy-to-operate design

Features

• RAM 4021 Monitor
• Carbon monoxide (CO) sensor
• Other sensors (as specified)
• Manual

G460-11-03-00-00-44 G460 Multi-Gas Detector with Alkaline Smart Pump and NiMH Battery with Flashlights, O2, Catalytic Combustion LEL Sensor, CO and H2S Sensor by GfG

For over 50 years, GfG Instrumentation has worked to develop the most reliable and effective equipment for gas detection and measurement technology. Developed by a team of highly experienced scientists and specially trained engineers, GfG products are high quality reliable instruments designed to meet the unique needs of potentially hazardous worksite. With the introduction of the G460 Multi-Gas Detector, GfG Instrumentation is continuing the trend.

G460 Multi-Gas Detector

The G460 Multi-Gas Detector is a compact and robust system with the capabilities of detecting up to six different gases and simultaneously displaying the readings. The portable detector features a user friendly and intuitive interface to simplify the day to day operations.

Ease of Use

For typical daily operations, the G460 Multi-Gas Detector operates with a single button. The complete user interface can provide access to advanced setup options with three buttons. The unit also features easy calibration operation. Simply attach the calibration adapter and apply gas. The G460 will automatically perform the appropriate adjustments. The detector will then store the dates of the three most recent calibrations for each sensor.

The G460 also features a large easy to read tricolor display which uses a color code to indicate the alarm severity. From green to orange to red, the tricolor display is intuitive and incredibly user friendly. The display feature can also flip or zoom with the touch of a button. The G460 multi-faceted alarm system also includes an ultra loud audible buzzer at 103 dB, a standard vibration mechanism, and 360 bright LED alerts (the LED alerts can also be equipped to function as flashlights). This multi-faceted system is sure to alert users and those nearby of the potential hazardous conditions. For smooth and continuous operations, the G460 Multi-Gas Detector uses interchangeable alkaline and rechargeable battery packs that provide up to 25 hours of continuous operation. Using a drop in cradle charger, the rechargeable pack can completely recharge in less than 4 hours.

G460 Multi-Gas Detector Features

The G460 Multi-Gas Detector features a motorized pump with a built-in diffusion or sample draw mode switch. The hose is easily attachable and can draw from 100 feet away. The hose is powered by its own battery pack that provides 20 hours of continuous operation. The multi-gas detector also features the widest range of sensors on the market. The compatible long lasting (and interchangeable) smart sensors include LEL, SO2, O2, H2, H2S, NO, CO, O3, HF, NH3, CIO2, CI2, PH3, ETO, HCN, and NO2. Users can purchase additional sensors to help customize the unit such as infrared sensors for the measurement of CO2 and photoionization sensors for volatile organic chemical hazards. The G460 has standard data logging capabilities that store up to 55 hours of the most recent activities. Alarm activations gas thresholds and stored permanently in the internal memory. Employers can download all internal information to generate reports and monitor results.

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

BW Technologies Collapsible Sample Probe with Handle (6 feet)

BW Technologies manufactures a range of accessories, attachments, and replacement parts for its devices. To help improve the usability of its detectors, BW Technologies also produces various probes. The BW Technologies Collapsible Sample Probe with Handle extends to approximately 6 feet and can easily fold into a compact unit that will easily fit in a utility belt, work bag, or pocket. This sample probe also has a comfort grip handle for ease of use.

Part Number: GACPROB2

18100060-5 Gasbadge Pro Single Gas Monitor, SO2 by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

Biosystems Multipro Confined Space Gas Detector

The BiosystemsMultipro Confined Space Gas Detector is a compact and efficient confined space detector. Understanding user needs and industrial applications, Sperian designed the detector with numerous features and optional accessories. The unit offers easy to read live gas readings and one button operations. The alarms are effective and unmistakable while on the site. The device is customizable and configurations are easy to adjust. With a durable casing, rubber molding, and a sleek design, the detector is the perfect handheld instrument for onsite gas detection needs.

Versatility and Customization

The gas detector is simple in design and compatible with many accessories designed to improve its versatility while allowing for user customization. Users can purchase accessories to customize the unit to fit their workplaces specific needs. Optional accessories include sampling pumps, calibration adapters, sample draw kits, and sample probes.

Key Features and Accessories

The BiosystemsMultipro Confined Space Gas Detector features a sleek and compact design with one button operation and an easy to read front mounted display with a backlight. An optional slip-on software controlled pump is available. The pump is powered by the BiosystemsMultiPro battery. It will indicate low flow and will perform an automatic leak test before every use. For recordkeeping, an automatic event logger and optional datalogging is available. The unit also features a Black Box recorder with over 40 hours of storage. When purchasing the detector, users will also receive.

• an operator s guide
• a training CD-ROM
• a charger for the rechargeable version
• a clothes clip
• a laminated quick reference guide
• a calibration adapter
• tubing

Sensors and Batteries

The unit is available with 3 sensors. Each sensor is user replaceable. The detector has a one button auto calibration with a calibration due reminder. The sensors are also capable of providing calibration for predictive maintenance. The confined space gas detector uses either interchangeable alkaline or rechargeable (Li-Ion) batteries. It also uses a drop-in charger while fully recharging in less than 6 hours.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation has over 50 years of industry experience in research and development. Because of its global reputation for dependable and reliable personal safety products, Honeywell announced its intent to acquire the company in 2010. Sperian Protection Instrumentation is now owned by Honeywell and has expanded Honeywell s offerings in the personal safety industries and the American market. Sperian is world renowned for design innovation and advanced technologies. With this acquisition, Honeywell intends to carry on Sperian s legacy of delivering innovative and advanced safety products.

Part Number: 116L-430

GHS1026 Trained Vinyl Stickers (10/Pkg) by GHS Safety

These decals are great handouts at the completion of your HazCom GHS training sessions. These decals feature the same design as Fabic Iron On patches. 2.5" in diamter and printed on peel and stick vinyl, these decals come 2 per sheet, 5 sheets per package for a total of 10 stickers per package.

HazCom GHS Safety Trained Stickers feature the same design as Fabric Patches. These decals are great handouts at the completion of your HazCom GHS training sessions. 2.5" in diameter and printed on peel and stick vinyl, these decals come 2 per sheet, 5 sheets per package, 10 stickers per package.