Bluelab

PENSTP pH and Conductivity Starter Pack by Bluelab

Perfect for quick and easy pH and temperature readings direct from your solution. The Bluelab® pH Pen is the preferred option for hand held pH meters. It provides a compact, quick and handy way to manage the success of your crops to ensure maximum uptake of nutrients.

A key parameter that affects nutrient uptake is whether your solution is acid or alkaline. We measure this in pH. Teamed with our Bluelab® Conductivity Pen you have a robust, convenient and accurate measurement system.

Features

• Measures pH and temperature
• Selectable units for temperature
• Fully waterproof
• Backlit LCD display
• Double junction probe (not replaceable)
• Simple two point calibration process with 30 day calibration indicator
• Hold reading function
• Low battery indicator
• Auto off function
• Automatic temperature compensation
• 1 AAA replaceable battery included

PH4250BL pH 4.0 Calibration Solution 250ml. carton of 6 by Bluelab

Calibration and conductivity standard solutions... a must in every grower's toolbox.

The Bluelab® calibration and conductivity standard solutions are essential for use with all Bluelab® products.

Bluelab® solutions are manufactured specifically for Bluelab® products and are referenced to high laboratory standards to ensure your Bluelab® products last longer and maintain accuracy.

POWERPODNA Powerpod by Bluelab

Electronic mains switching box designed to activate mains powered equipment. The Bluelab® PowerPod™ is an electronically controlled mains switching box that is designed to activate mains powered equipment via control signals from a Bluelab® controller.

The Bluelab® PowerPod™ is ideal for use when using a Bluelab® Pro Controller™ with third party mains powered pumps, heaters and coolers for temperature control.

Features

• 4 x IEC mains outputs (15A max inrush current)
• 100V~-240V~, 50/60Hz compatible
• Adds temperature control to Bluelab® Pro Controller and some Bluelab® Dosetronic™ models1
• Compatible with Bluelab® Pro Controller and Bluelab® Dosetronic™ models1

803250 EC Shroud (for all Bluelab Conductivity Probes) by Bluelab

The 'Shroud' (found at the probe) is very important for the accuracy and protection of the meter.

The shroud carries out three crucial functions:

• Protects the probe tip from damage
• Slows the movement of the solution to get a more accurate reading
• The slots allow an even flow of solution to pass through to avoid air bubbles on the probe surface

The shroud is removed prior to the cleaning process.

CONSTICK Connect Stick by Bluelab

Collects information wirelessly from Bluelab® Connect™ devices to your computer.

One Bluelab® Connect™ Stick receives data wirelessly from multiple Bluelab® Connect™ devices.

Download the free Bluelab® Connect™ software, to get grow site data direct to your local computer and mobile app. Get connected

Features

• Data logging capability (when used with Bluelab® Connect™ products, sold separately)
• Free Bluelab® Connect™ Software available online
• View data and current status remotely (A computer with permanent internet access is required)
• Installation instructions

Ideal for use with

• Bluelab® Guardian Monitor Connect™
• Bluelab® Connect™ Range Extender

PENGTB Grower's Toolbox by Bluelab

The essential tools you need to easily measure your crop's nutrient solution.

These clever pens make it easy to measure the nutrient uptake (pH), the amount of food available (EC/ ppm) and the solution temperature (°C / °F), so you can create the best nutrient environment for your plants' growth.

With these tools and essentials in one value added pack, the Grower's Toolbox is a complete simple crop management system that helps you get it right, from the start.

Features

• Bluelab pH Pen
• Bluelab Conductivity Pen
• Bluelab Grow Book
• Bluelab pH & Conductivity Probe Care Kit
• Grower's Wall Chart

PROBTEMP Temperature Probe by Bluelab

Use the temperature probe in the same solution as the Bluelab® pH Probe. The probe provides a temperature reading and automatic temperature compensation (ATC) for pH measurements.

Features

• Robust and easy to clean stainless steel body
• Waterproof cable joint
• Quality 3.5mm connection
• No calibration required
• Bluelab 'EarthLink' compatible to reduce interference
• 2 meter / 6.5 foot standard cable
• Use with Bluelab® pH Controller and Bluelab® pH Controller Connect

SPOTKIT Sample Pot by Bluelab

Perfect for reservoirs located more than 2 meters / 3.3 feet from your controller unit.

Place probes directly into the chamber for direct measurement of nutrient solution. Fittings include

PENCON Conductivity Pen by Bluelab

The go-to for hand held conductivity meters.

The Bluelab® Conductivity Pen simply tells you the amount of nutrient in your solution. Conductivity is automatically compensated with the integrated temperature sensor.

Providing a compact, quick and accurate way to measure two key parameters for crop health.

Teamed with our Bluelab® pH Pen you have a robust, convenient and accurate measurement system.

Features

• Measures conductivity and temperature
• Selectable units for conductivity and temperature
• Shows conductivity scales CF, EC, PPM 500 & PPM 700 at the touch of a button
• Fully waterproof
• Backlit LCD display
• Calibration optional
• Successful 30 day calibration indicator
• Hold reading function
• Low battery indicator
• Auto off function
• Automatic temperature compensation
• 1x AAA replaceable battery included

PENPH pH Pen by Bluelab

Perfect for quick and easy pH and temperature readings direct from your solution.

The Bluelab® pH Pen is the preferred option for hand held pH meters. It provides a compact, quick and handy way to manage the success of your crops to ensure maximum uptake of nutrients.

A key parameter that affects nutrient uptake is whether your solution is acid or alkaline. We measure this in pH.

Teamed with our Bluelab® Conductivity Pen you have a robust, convenient and accurate measurement system.

Features:

• Measures pH and temperature
• Selectable units for temperature
• Fully waterproof
• Backlit LCD display
• Double junction probe (not replaceable)
• Simple two point calibration process with 30 day calibration indicator
• Hold reading function
• Low battery indicator
• Auto off function
• Automatic temperature compensation
• 1 AAA replaceable battery included

PROBPH pH Probe by Bluelab

The Bluelab® pH Probe is a replacement pH probe suitable for use with Bluelab® products that use a BNC fitting.

pH probes have a limited lifespan, they age with everyday use. With proper care and use (keeping the probe tip hydrated and cleaning once a month) you can extend the probe life.

The pH probe tip should be stored in KCl solution to minimise the contamination of the gel.

Features

• Easy to clean
• Gel filled (non-refillable)
• Double junction reference
• Waterproof cable joint
• Probe holder included - keeps probe secure
• Quality BNC connection
• 2 meter / 6.5 foot standard cable

CONTPH pH Controller by Bluelab

Fine-tunes the reservoir pH levels for you. Confidence - your pH is taken care of.

Automatic measuring and adjusting to pre-set pH levels with optional alarms. Provides consistent control of pH in growing sytems.

Intuitive "on time" and "off time" allows the solution to dose and mix before the controller measures and doses again.

Reassurance with safety lockouts to prevent over delivery of pH.

Probe cable length: 2 meters / 6.5 feet

Features

• Automatic control of pH level in systems with reservoirs up to 200 gallons / 760 litres
• Dose either pH up or pH down adjusters
• Replaceable double junction pH probe & peristaltic pump
• Plant-safe green backlit LCD with adjustable brightness
• Large, easy to read display
• Easy to navigate menu to adjust settings
• Simple push button pH calibration with on screen instructions
• Flashing high and low alarms with control lockouts
• Water resistant, wall mount design
• Separate Bluelab® Temperature Probe (for pH ATC)

MONGUA Guardian Monitor by Bluelab

See your desired levels of pH, conductivity and temperature - 24/7.

Monitoring your crops 24 hours a day, with the ability to set high and low alarms for each parameter. A flashing display lets you know if your parameters move away from the optimum, allowing you to make the important adjustments quickly and effectively. The large, clear display allows readings to be viewed from a distance.

The Bluelab® Guardian Monitor is mains powered and is either mounted to the wall or hung on a support and probes positioned inside your reservoir / solution.

Probe cable length: 2 meters / 6.5 feet

Features

• Wall mount for continuous viewing
• Plant-safe green LEDs, with adjustable brightness
• Large easy to read displays
• Replaceable double junction pH probe included
• Easy to navigate menu to program & adjust settings
• Selectable conductivity and temperature scales
• No calibration required for conductivity and temperature
• Simple push button pH calibration
• Flashing high and low alarms (non-audible)
• Built with greater tolerance to RF / electronic interference
• International power supply
• Non-volatile memory

METCOM Combo Meter by Bluelab

A convenient and portable solution pH, conductivity, and temperature meter all in one.

Easy to read screen and push button operation, choose your preferred parameter to display.

Portable with no external power supply required, this meter can be used anytime and anywhere to help manage your plant's daily nutrient requirements.

Team with Bluelab® solutions and the convenient Bluelab® Carry Case.

Probe cable length: 2 meters / 6.5 feet

Features

• Replaceable double junction pH probe included
• Shows conductivity scales CF, EC, PPM 500 & PPM 700 at the touch of a button
• Lightweight and portable
• Large easy to read, backlit LCD display
• No calibration required for conductivity and temperature (factory calibrated)
• Simple two point pH calibration process with 30 day calibration indicator
• Over range and under range indicators
• Low battery indicator
• 2x AAA alkaline batteries included
• Auto off function

TRUNV2 Truncheon Meter by Bluelab

Displaying all the conductivity scales EC, CF, PPM 500 & PPM 700 on a single line.

Each time you feed your plants it's essential to know the nutrient levels of your solution. Simply done with the Bluelab® Truncheon® Nutrient Meter.

Flashing lights indicate your conductivity reading, which is automatically compensated with the integrated temperature sensor. Removable shroud for easy cleaning.

Meter length: 40cm / 16 in.

Features

• Conductivity range up to 3.6 EC, 36 CF, 1800 ppm 500 and 2520 ppm 700
• Fully waterproof
• Provided with EC, CF, ppm 700 and ppm 500 scales
• Auto on/off function
• No calibration required (factory calibrated)
• Daylight readable blue LEDs, visible in bright or dark environments
• No buttons or switches
• Battery operated (3x AA batteries included)
• Measure while mixing nutrients in your reservoir

CONEXTEND Connect Range Extender by Bluelab

Simply plug the Bluelab® Connect™ Range Extender into a power supply between Bluelab® Connect™ Devices and Bluelab® Connect™ Stick to increase the signal.

For extra-long distances multiple Bluelab® Connect™ Range Extenders can be used.

Features

• Bluelab® Connect™ Range Extender
• International Power Supply *may differ from image shown
• Increases range or signal strength Bluelab® Connect™ products
• Installation instructions included

Ideal for use with

• Bluelab® Guardian Monitor Connect™
• Bluelab® Connect™ Stick

PWRSCONTPH pH Controller Power Supply by Bluelab

Use the international power supply pack with any Bluelab pH Controller or Pro Controller.

PWRSGUAR Guardian Monitor Power Supply by Bluelab

Use the international power supply pack with any Bluelab Guardian Monitor.

Power Out: 5V DC, 1Amp

CONEXTEND2 Connect Range Extender 2 by Bluelab

Product Features / Benefits

• Increases Connect wireless range by a further 100 metres/330 feet (typically indoors)
• Link multiple Range Extenders for extra-long range (up to 700 metres/2300 feet)
• Water resistant for peace of mind
• International power supply included for easy use anywhere
• Easy access to Bluelab Connect software

CONSTICK2 Connect Stick 2 by Bluelab

Product Features / Benefits

• Receive wireless data from Bluelab Connect devices to your computer and smartphone
• View data and device status remotely (required: computer with permanent internet access)
• View data and get alerts on your smartphone or tablet
• Send wireless data up to 100 m/330 ft (typically indoors)
• Send wireless data up to 400 m/1312 ft in open space (line of sight)
• Receive data from up to 50 Connect devices with one Connect Stick
• Easy access to Bluelab Connect software