Calibration Kit

WD-35661-70 Deluxe Testr Calibration Kit by Oakton

Ideal for plant and field uses.

Each kit contains TDS Singles calibration pouches (two each of 447 µS, 1413 µS, 2764 µS, 15,000 µS, and rinse water); sample jar; and screwdriver all in a hard shell carrying case with room for your TDSTestr (order Testr separately).

TDS Singles are handy, single use pouches that each contain 20 ml of fresh calibration solution. Accuracy is ±1% at 25°C.

• Protective carrying case organizes meter and materials
• Includes everything you need for convenient calibration
• Calibration standards are made with NIST traceable materials

*Please note we can only ship RKI products to customers within the United States

M5-CK-DL GasAlertMicro 5 Series Deluxe Confined Space Kit

The GasAlertMicro5 Series is BW Technologies flagship multi-gas monitor. This kit houses any of the three versions of the GasAlertMicro5 series, including the PID and IR versions and pumped or non-pumped versions.

As a gas monitoring professional you can have peace of mind knowing that you have all of the parts and accessories to properly test your instrument and keep it in good working order. Bump checks and calibration are an essential part of any safety protocol and this kit makes it easy knowing that all of the necessary equipment is in one location. In addition routine maintenance is easier since auxiliary filters and quick connect fittings can be changed when necessary using the spares in the kit. The 1.0 LPM regulator is more versatile than the 0.5 LPM regulator found in other kits since the 1.0 LPM has a greater flow rate for "sticky" gasses such as Chlorine and Nitrogen Dioxide.

In addition the included holster makes it easy to wear your GasAlertMicro 5 on your body. This holster attaches to your belt and holds the instrument display upside down. The advantage of this is that you don't need to remove it from your belt in order to see the readings. When you lift the end of the instrument the display will now be facing you in the correct orientation.

Other parts of the kit include a 10 ft sampling hose for increased sampling range, a sample probe for taking readings from hard to reach areas, calibration cap, and a durable aluminum carry case that houses everything in custom sized foam cut-outs.

Note: Calibration gas not included. Since the GasAlertMicro5 series has so many possible sensor combinations finding the right cylinder(s) can be tricky. Please give us a call at 1-866-455-7832 and we will ensure that we find the correct cylinder for you.

*Please note we can only ship RKI products to customers within the United States

B125 ORP Calibration Kit by Sensorex

The B125 ORP Calibration kit can be used for a simple calibration of both pH and ORP sensors. Use this kit for pH calibration, then convert the pH buffers into stable ORP buffers by saturating with quinhydrone. The B125 ORP calibration kit is a complete, ready-to-use package and can be used for up to 30 calibrations.

Features:

• Simple calibration of pH and ORP simultaneously
• Fast response time
• Mix and prepare the calibration buffers in seconds
• Instantly ready for use and ships with plastic beakers and stirring sticks
• One year shelf life guaranteed

*Please note we can only ship RKI products to customers within the United States

10051155 Sirius Multigas Detector Kit by MSA

MSA is a leading manufacturer of workplace safety products. With a worldwide reputation as the Safety Company, MSA takes great pride in developing quality and reliable products that protect men and women from hazardous workplace conditions. The commitment to safety, efficiency, and dependability is unparalleled. Using the most advanced technology, MSA research and development is constantly developing new safety solutions that streamline productivity and provide quality and affordable safety products that are leaders in the industry. The Sirius Multigas Detector does just that as it combines a photoionization detector (PID) with multigas monitoring into one efficient and user friendly portable device.

Photoionization detection

Multigas detection

User friendly

The user-friendly software is another incredible feature offered by MSA, the Safety Company. The software allows for easy preprogramming and customization of display screen characters along with detector readings.

Alarms

Compatibility and calibration

Sirius Multigas Detector Kits

Enables data download, calibration and changes to instrument settings. Requires PC Interface Kit (See C011305).

*Please note we can only ship RKI products to customers within the United States

TRU-01-NU-Z/K Triple Plus+ Portable 4-Gas Monitor Kit, CH4 % LEL, O2, H2S, CO Non-pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

Kit Includes:

• Triple Plus+ Portable 4-Gas Monitor, Non-pumped with the standard accessories
• Communications software
• Computer lead
• Charger/interface and carrying (brief) case with foam liner

Automatic Test and Calibration Station by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

*Please note we can only ship RKI products to customers within the United States