Single Gas Clip On

10076728 Altair Pro Single Gas-Detector Alternate Set Point Models - Hydrogen Sulfide (H2S) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

BWC2-H515 BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 5 ppm / High - 15 ppm by BW Technologies

Hydrogen sulfide (H2S) is flammable and toxic at relatively low concentrations. It is essential to keep this potentially dangerous gas at safe levels, at all times. That is why many workers trust the BWC2-H515 by BW Technologies. This portable H2S detector is one of the most reliable and cost effective models you can buy, and it will perform constantly for two solid years, without any maintenance. You do not have to be concerned with battery charging or sensor replacement. The BWC2-H515 has a high alarm when H2S levels reach 15 ppm and a low alarm at 5 ppm (these are default settings).

If you put your BWC2-H515 in storage, it will prolong its life. For instance, 60 days on the shelf provides an additional 60 days of service (up to one year).

Your BWC2-H515 will seamlessly fit in with Fleet Manager II software and MicroDock II systems. In addition, it works especially well with IntelliDoX instrument management systems, and here are some of the things you receive:

• Test as many as 5 sensors at once
• Quick and efficient recordkeeping
• Fast bump testing capabilities
• Parameter and alarm set adjustment

BW Clip Technology

Standard features:

• Light and easy to carry
• Virtually maintenance free
• Operates with a single push button
• Self-testing sensor and battery
• 95 db alarm can also flash or vibrate
• Can withstand extreme working environment
• Affordable operating cost
• Remembers 35 bump tests and gas events

Configuring Your BWC2-H515

Part Number: BWC2H515

BWC2-X BW Clip 2 Year Single Gas Detector, Oxygen (O2), Low - 19.5% vol. / High - 23.5% vol. by BW Technologies

If you must monitor the oxygen in a work environment, you need the most accurate monitors you can buy. However, it's also necessary to have something that is light, portable, and simple to use. This makes it much easier on your workforce. The BW Clip BWC2-X is designed with these features in mind, and it is an affordable solution for portable O2 monitoring, that meets OHSA specifications.

The BWC2-X operates with the touch of a button and is so easy to use. Some monitors require battery charging and sensor changing periodically, but not the BWC2-X. Everything is built in and the monitor lasts for 2 full years of operation. Plus you also have six months of storage that extends its life, if needed. Once you activate and turn on the unit, it works constantly checking the air for oxygen levels. If they get below 19.5 percent, you receive an alarm, and over 23.5 percent sounds an alarm (default settings).

Compatible with MicroDock II and Fleet Manager II

• No computer necessary
• Testing for 5 monitors
• Simple fleet management
• Parameters and alarms can be adjusted
• Fast bump tests

Reflex Technology™ and Surecell™

• Surecell™ - Monitors oxygen levels in a wide range of temperatures. Functions in temperatures up to 122 Fahrenheit and cold environments with temperatures -4F (-20C).
• Reflex Technology™ - auto testing provides increased worker confidence and safety. Every day the monitor performs on board diagnostics.

Features:

• 2 year warranty
• Small, light, and compact
• Affordable
• One button operation that is tamper proof
• Loud 95 decibel alarm vibrates and flashes red can be seen 360 degrees.
• Tracks as many as 35 tests and readings

Options

Part Number: BWC2X

• Single Gas monitor which detects one of the following gases: CO, H2S, O2, SO2, PH3, CL2, NH3, NO2, HCN, ETO, CLO2, O3, NO

• Multiple language and datalogging option
• Rugged, IP-66/67 highly water-resistant design
• Built-in concussion-proof boot
• Continuous LCD shows real-time gas concentration with backlight in low light (auto and on demand); in alarm (auto)
• LOW, HIGH, TWA and STEL alarms with adjustable set points
• Provides 95 dB tone and bright LED indication on alarm (typical)
• Internal vibrating alarm
• Compact (1.1 x 2.0 x 3.75 in. / 28 x 50 x 95 mm) and Lightweight (2.9 oz. / 82 g)
• 2-year battery life (typical) with replaceable 3V camera battery
• Simple auto-zero and calibration procedure
• Full function self-test of: sensor, battery, and circuitry integrity

How easy is the Gas Alert Extreme to use?

Alligator Clip

Highly Water Resistant

Durable

Calibration

72-0008RK-01 OX-01 Single Gas Personal Monitor, 0-40% O2 with Alkaline and Alligator Clip by RKI Instruments

Certain working environments cannot avoid the potentially unsafe and hazardous conditions. In those situations, it is imperative that employees be equipped with the very best in workplace safety. The types of dangers resulting from hazardous conditions are vast, and the presence of dangerous gases can result in a number of undesirable outcomes such as asphyxia, fire or explosions, spontaneous combustion, and on a smaller scale, damage to the human body or equipment. Using state of the art gas detection technology, RKI Instruments developed the Single Gas Clip-On Personal Monitor to detect nearby atmospheric hazards and alert users in a quick and timely manner.

Single Gas Clip-On Personal Monitor

The Single Gas Clip-On Personal Monitor by RKI Instruments is a top of the line gas detection system that clips easily into place on a belt, pocket, helmet, or shirt. Its sensor detects the presence of four gases (oxygen, carbon monoxide, hydrogen sulfide, and combustible gas) and immediately alerts the user and those nearby. The device is small enough to be highly portable and is available at a very affordable price.

The Single Gas Clip-On Personal Monitor is available in four different models, each of which have been deemed safe for workplace use by CSA to U.S. and Canadian Standards for Class I, Division I, Groups A, B, C, and D atmospheres.

Triple Alarm System

When potentially hazardous atmospheric conditions have been detected, the Single Gas Clip-On Personal Monitor will activate its triple alarm system. The triple alarm is designed to alert the user and everyone within the vicinity. Once the alarm is activated, the backlight will turn on, the LED lights will flash, the audible alert will initiative, and the device will being to vibrate. The triple system is designed to be noticeable during a variety of working conditions when a user may not have full use of senses.

In addition to hazardous atmospheric conditions, the device will alert users when the battery is low, the sensors are malfunctioning, and more.

Specifications

The Single Gas Clip-On Personal Monitor has a response time of 20 seconds for oxygen levels and 30 seconds for carbon monoxide, hydrogen sulfide, and combustible gas. The unit is powered by alkaline dry cell batteries (2 AAA batteries) with a battery life of over 3,000 hours (except model GP-01 which has a battery life of 16 hours). The unit is also equipped with a Peak hold function and STEL & TWA function. Its pocket size dimensions (1.4 W x 4.1 H x 0.8 D) and light weight (3.5 ounces) renders the device highly portable.

Accessories

The Single Gas Clip-On Personal Monitor is compatible with a number of accessories that help to customize the unit to meet a specific workplace's needs. The unit comes standard with rubber protective boots, alkaline batteries, belt clip or alligator clip, and wrist strap. Optional accessories can also be purchased such as a calibration cap, calibration kit, charger unit, and battery pack.

*Please note we can only ship RKI products to customers within the United States

BWC2R-M30200 BW Clip RT 2 Year Single Gas Detector, Carbon Monoxide (CO), (Low 30 ppm / High 200 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-M30200

MCXL-XW00-Y-NA GasAlertMicroClip XL Detector Combustible (%LEL), Oxygen (O2) - Yellow Housing by BW Technologies

Do you require portable dual gas monitor equipment that measures oxygen and LEL (lower explosive limit) for maximum worker safety? Is cost very important? How about ease of use and convenience? You should check out all the features and price of the GasAlertMicroClip XL.

Maybe you have heard of the GasAlertMicroClip XT or you might even be using some of them. The GasAlertMicroClip XL has all the great functions and benefits of the XT with one addition. It is made to provide longer battery life. In fact, it is 8 hours longer than the XT model (18 hrs). This is an important feature for long shifts and cold environments.

Compliance checking is simple and easy because the GasAlertMicroClip XL uses the latest IntelliFlash™ technology. In addition, a gas monitor that is simple to wear and lightweight, allows for working without distractions. And, training is very quick and simple because you only have to operate a single button. All throughout the shift, the GasAlertMicroClip works, monitoring O2 and LEL.

If you use the MicroDock II or Fleet Manager II you are in luck. The GasAlertMicroClip XL is specifically designed to work with them. You can even use XL and XT models together.

Why Include GasAlertMicroClip XL in Your Fleet?

• Light and easy to carry around it weighs just 6.7 ounces
• Full 2 year warranty (including the sensors)
• Works in temps as low as -4F
• Affordable can save you money over time
• Water resistant
• Easy and quick compliance verification
• Automatic instrument calibration
• Checks its own vital functions on start up
• Continuous O2 monitoring
• Checks LEL (lower explosive limit)
• Resistant to concussion and impacts
• Supports Spanish, English, German, French, and Portuguese
• IP 66 compliant

GasAlertMicroClip XL Comes with:

• Lithium polymer battery
• AC charger
• Stainless steel alligator clip
• Test hose and calibration cap
• Operating manual with CD

Part Number: MCXLXW00YNA

BW Clip RT 2 Year Single Gas Detector by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

BWC2R-M25100 BW Clip RT 2 Year Single Gas Detector, Carbon Monoxide (CO), (Low 25 ppm / High 100 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-M25100

BWC2-M50200 BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 50 ppm / High - 200 ppm by BW Technologies

When you need accurate and dependable CO (carbon monoxide) detection, you can rely on the BW Clip BWC2-M50200. With some portable detectors you have to worry about charging or even changing batteries, but not with the BWC2-M50200. This portable gas detector is made to last for entire 2 years and it runs continuously. Simple to use and operate, you'll find the BWC2-M50200 maintenance free. The sensor never needs changing and the low alarm sounds at 35 ppm (parts per million). High alarm at 200 ppm (default).

The two years of operation can be as long as three years, if you need to store the unit. In fact, storage is proportional to longevity, and six months of hibernation gives you an additional six months of operation.

Compatibility

• Alarms and parameters are adjustable
• Test as many as five sensors at once
• Simple recordkeeping
• Fast bump testing

Gas Monitoring Technology

• Surecell™ by Honeywell has been extensively tested and designed to deliver quick performance in all kinds of environments. This assures worker safety and fewer problems.
• Reflex Technology™ - your gas monitor will automatically perform daily self testing.

Simple Configuration

7 Reasons to Purchase the BWC2-M50200

• Lightweight and easy to carry around.
• Affordable price
• Simple one button operation
• Easy to hear alarm (95db)
• Tracks last 35 bump tests and CO readings
• Made to perform flawlessly in damp and extreme temperature environments.
• Sensor and battery are self testing

Part Number: BWC2M50200

Single Gas Clip

The Single Gas Clip is one of the most advanced portable disposable personal gas monitoring systems in the world. Thanks to Gas Clip Technologies dedication to customer focused designs, the single gas clip has many user friendly features to improve reliability and convenience. The low-maintenance device performs a variety of automatic functions while protecting the user with its unmatched sensor technology. Continuing with its tradition of durable and reliable products, Gas Clip Technologies has produced one of the best single gas monitoring systems on the market.

Single Gas Clip Features

The Single Gas Clip includes numerous features to enhance user experience and reduce maintenance. One such feature is the automatic testing. The clip performs a full function self test at every activation. The same test is also performed every 20 hours. The self test will notify users if there and operability or functional problems with the device. The monitor will also notify users when it is time to perform a bump check. For the reminder, an icon will flash across the screen when the unit is powered on, and a TEST icon will stay fixed at the top of the screen until the user has performed the bump test.

In addition to the testing and reminding features, the Single Gas Clip also includes

• Bump check and calibration identification and confirmation
• User adjustable alarm specifications
• Real-time gas readings or time display capabilities
• A 50% larger battery capacity that competitors
• Docking capabilities with the Gas Clip Technologies Clip Dock
• Infrared communication technology for downloads, configurations, tests, and updates
• Personal 6 digit identification codes

Rugged and Extra Tough

From the hottest to the coldest climates, the Single Gas Clip is designed to withstand the elements. The ergonomically designed casing can withstand accidental drops and common worksite abuse. Its bright yellow outer coating is an added feature intended to be recognizable and distinguishable in the workplace. This helps to reduce the possibility that a user may leave the unit behind instead of bringing it with him. While the outer casing is built to last and can withstand the harshest environments, the entire unit is cost efficient and disposable at the end of its life.

Single Gas Clip Specifications

The portable disposal handheld unit is compact and lightweight. It has dimensions of 3.37 x 1.97 x 1.15 inches and weighs less than 3 ounces. The unit is cased in a durable hard outer casing to protect the internal circuitry. The unit is operable in a wide range of temperatures (generally about -40 to +122 degrees Fahrenheit) and humidity (5% to 95% non-condensing relative humidity). The unit features a triple alarm system with bright visual alarms, a very loud audible alarm at 95 decibels, and a vibrating alarm. This helps to ensure that despite the environmental conditions (loud worksite, bright worksite, hearing protection equipment, etc.) the user can be immediately notified of prospective dangers. Each Single Gas Clip comes with a 2 year warranty (from date of activation) and a 1 year shelf life.

BWC2R-H515 BW Clip RT 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), (Low 5 ppm / High 15 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-H515

BW Technologies Chest Harness

BW Technologies has a wide range of accessories designed to improve the usability of their product lines. The BW Technologies Chest Harness does just that. Simply secure the harness to your body and insert the monitor into the harness. The monitor will fit securely in place on your chest and near your breathing zones. The chest harness is comfortable and tough enough to withstand modern work environments. With the chest harness, the device can continue to be hands free.

Part Number: GACH2

73-0046RK-03 HS-01 Single Gas Personal Monitor, 0-100 PPM with Alkaline and Belt Clip by RKI Instruments

Certain working environments cannot avoid the potentially unsafe and hazardous conditions. In those situations, it is imperative that employees be equipped with the very best in workplace safety. The types of dangers resulting from hazardous conditions are vast, and the presence of dangerous gases can result in a number of undesirable outcomes such as asphyxia, fire or explosions, spontaneous combustion, and on a smaller scale, damage to the human body or equipment. Using state of the art gas detection technology, RKI Instruments developed the Single Gas Clip-On Personal Monitor to detect nearby atmospheric hazards and alert users in a quick and timely manner.

Single Gas Clip-On Personal Monitor

The Single Gas Clip-On Personal Monitor by RKI Instruments is a top of the line gas detection system that clips easily into place on a belt, pocket, helmet, or shirt. Its sensor detects the presence of four gases (oxygen, carbon monoxide, hydrogen sulfide, and combustible gas) and immediately alerts the user and those nearby. The device is small enough to be highly portable and is available at a very affordable price.

The Single Gas Clip-On Personal Monitor is available in four different models, each of which have been deemed safe for workplace use by CSA to U.S. and Canadian Standards for Class I, Division I, Groups A, B, C, and D atmospheres.

Triple Alarm System

When potentially hazardous atmospheric conditions have been detected, the Single Gas Clip-On Personal Monitor will activate its triple alarm system. The triple alarm is designed to alert the user and everyone within the vicinity. Once the alarm is activated, the backlight will turn on, the LED lights will flash, the audible alert will initiative, and the device will being to vibrate. The triple system is designed to be noticeable during a variety of working conditions when a user may not have full use of senses.

In addition to hazardous atmospheric conditions, the device will alert users when the battery is low, the sensors are malfunctioning, and more.

Specifications

The Single Gas Clip-On Personal Monitor has a response time of 20 seconds for oxygen levels and 30 seconds for carbon monoxide, hydrogen sulfide, and combustible gas. The unit is powered by alkaline dry cell batteries (2 AAA batteries) with a battery life of over 3,000 hours (except model GP-01 which has a battery life of 16 hours). The unit is also equipped with a Peak hold function and STEL & TWA function. Its pocket size dimensions (1.4 W x 4.1 H x 0.8 D) and light weight (3.5 ounces) renders the device highly portable.

Accessories

The Single Gas Clip-On Personal Monitor is compatible with a number of accessories that help to customize the unit to meet a specific workplace's needs. The unit comes standard with rubber protective boots, alkaline batteries, belt clip or alligator clip, and wrist strap. Optional accessories can also be purchased such as a calibration cap, calibration kit, charger unit, and battery pack.

*Please note we can only ship RKI products to customers within the United States

10115521 Altair 4X Multigas Detector Kit by MSA

The Altair 4X Multigas Detector with MSA XCell Sensor Technology manufactured by MSA is a vision of safety and stability offering the very best technology in deadly gas detection. Workers in potentially dangerous situations can rely on the multigas detector to meet their unique needs. With a commitment to safety and excellence, the multigas detector offers a number of unique and exclusive features that help to ensure the safety of the user.

Inside the Altair 4X Multigas Detector with MSA XCell Sensor Technology, users will find the most advanced technology in lifesaving multigas detection systems. MSA XCell Sensors have a lifespan of double the industry average and is a breakthrough in mechanical sensor design. The sensors reliability and accuracy ensure that user will spend less time and money on calibration and bump tests. Most importantly, the sensors accuracy and fast response times can mean the difference between life and death.

Utilizing a rough and tough exterior casing, the Altair 4X Multigas Detector with MSA XCell Sensor Technology can survive a 20 foot drop. With durable rubber grips, a stainless steel clip, LED lights, a 24-hour battery the detector is heavy-duty and functional. The typical lifespan of the detector is greater than 4 years, and its state of the art design ensures that the multigas detector with advanced sensor technology will outlive poisons and other hazards. The life sensors will also give warnings and alert the user when the unit s sensor is reaching the end of its life. Providing comfort to users, the unit, sensors, and batteries come with a 3 year warranty and is both dust-tight and water-tight. MSA also produces a portable gas detector casing that glows in the dark for use in mining situations or confined spaces.

The Altair 4X Multigas Detector with MSA XCell Sensor Technology can also come equipped with two exclusive life saving safety features: MotionAlert and Instant Alert. When a user becomes immobile for more than 30 seconds, the MotionAlert sensor will activate and sends alerts to others with the immobile user s location. In other situations, users may find Instant Alert necessary in order to alert others of a potentially dangerous situation. With simply a push of a button, a user can manually warn others of possible hazardous conditions.

At slightly under 8 ounces, the Altair 4X Multigas Detector with MSA XCell Sensor Technology is lightweight and easy to carry. With an audible alarm of over 95 decibels, a vibrating alarm, and a visual alarm of 4 strategically placed ultra-bright LED lights, a necessary alert is certain to be noticed by the user and those nearby. The multigas detectors are equipped with high contrast LCD displays, rechargeable li-polymer batteries with a 24 hour lifespan, and standard 3 year warranties to ensure that users have the most sophisticated and reliable product on the market.

Using an Altair 4X Multigas Detector with MSA XCell Sensor Technology can save time, money, and lives. In industries where seconds can mean lives, MSA s most advanced sensor design is revolutionizing sensor technology and improving performance. With advanced safety features, state of the art sensors, tough exteriors, extended warranties, and incredible durability, MSA is committed to providing the best protection possible and building a leading portable gas detector that is built to last.

BW Clip 2 Year Single Gas Detector by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

BWC2R-H510 BW Clip RT 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), (Low 5 ppm / High 10 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-H510

10076719 Altair Pro Single Gas-Detector Alternate Set Point Models - Carbon Monoxide (CO) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

BW Clip 3 Year Single Gas Detector by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Single Gas Clip

The Single Gas Clip is one of the most advanced portable disposable personal gas monitoring systems in the world. Thanks to Gas Clip Technologies dedication to customer focused designs, the single gas clip has many user friendly features to improve reliability and convenience. The low-maintenance device performs a variety of automatic functions while protecting the user with its unmatched sensor technology. Continuing with its tradition of durable and reliable products, Gas Clip Technologies has produced one of the best single gas monitoring systems on the market.

Single Gas Clip Features

The Single Gas Clip includes numerous features to enhance user experience and reduce maintenance. One such feature is the automatic testing. The clip performs a full function self test at every activation. The same test is also performed every 20 hours. The self test will notify users if there and operability or functional problems with the device. The monitor will also notify users when it is time to perform a bump check. For the reminder, an icon will flash across the screen when the unit is powered on, and a TEST icon will stay fixed at the top of the screen until the user has performed the bump test.

In addition to the testing and reminding features, the Single Gas Clip also includes

• Bump check and calibration identification and confirmation
• User adjustable alarm specifications
• Real-time gas readings or time display capabilities
• A 50% larger battery capacity that competitors
• Docking capabilities with the Gas Clip Technologies Clip Dock
• Infrared communication technology for downloads, configurations, tests, and updates
• Personal 6 digit identification codes

Rugged and Extra Tough

From the hottest to the coldest climates, the Single Gas Clip is designed to withstand the elements. The ergonomically designed casing can withstand accidental drops and common worksite abuse. Its bright yellow outer coating is an added feature intended to be recognizable and distinguishable in the workplace. This helps to reduce the possibility that a user may leave the unit behind instead of bringing it with him. While the outer casing is built to last and can withstand the harshest environments, the entire unit is cost efficient and disposable at the end of its life.

Single Gas Clip Specifications

The portable disposal handheld unit is compact and lightweight. It has dimensions of 3.37 x 1.97 x 1.15 inches and weighs less than 3 ounces. The unit is cased in a durable hard outer casing to protect the internal circuitry. The unit is operable in a wide range of temperatures (generally about -40 to +122 degrees Fahrenheit) and humidity (5% to 95% non-condensing relative humidity). The unit features a triple alarm system with bright visual alarms, a very loud audible alarm at 95 decibels, and a vibrating alarm. This helps to ensure that despite the environmental conditions (loud worksite, bright worksite, hearing protection equipment, etc.) the user can be immediately notified of prospective dangers. Each Single Gas Clip comes with a 2 year warranty (from date of activation) and a 1 year shelf life.

Single Gas Clip

The Single Gas Clip is one of the most advanced portable disposable personal gas monitoring systems in the world. Thanks to Gas Clip Technologies dedication to customer focused designs, the single gas clip has many user friendly features to improve reliability and convenience. The low-maintenance device performs a variety of automatic functions while protecting the user with its unmatched sensor technology. Continuing with its tradition of durable and reliable products, Gas Clip Technologies has produced one of the best single gas monitoring systems on the market.

Single Gas Clip Features

The Single Gas Clip includes numerous features to enhance user experience and reduce maintenance. One such feature is the automatic testing. The clip performs a full function self test at every activation. The same test is also performed every 20 hours. The self test will notify users if there and operability or functional problems with the device. The monitor will also notify users when it is time to perform a bump check. For the reminder, an icon will flash across the screen when the unit is powered on, and a TEST icon will stay fixed at the top of the screen until the user has performed the bump test.

In addition to the testing and reminding features, the Single Gas Clip also includes

• Bump check and calibration identification and confirmation
• User adjustable alarm specifications
• Real-time gas readings or time display capabilities
• A 50% larger battery capacity that competitors
• Docking capabilities with the Gas Clip Technologies Clip Dock
• Infrared communication technology for downloads, configurations, tests, and updates
• Personal 6 digit identification codes

Rugged and Extra Tough

From the hottest to the coldest climates, the Single Gas Clip is designed to withstand the elements. The ergonomically designed casing can withstand accidental drops and common worksite abuse. Its bright yellow outer coating is an added feature intended to be recognizable and distinguishable in the workplace. This helps to reduce the possibility that a user may leave the unit behind instead of bringing it with him. While the outer casing is built to last and can withstand the harshest environments, the entire unit is cost efficient and disposable at the end of its life.

Single Gas Clip Specifications

The portable disposal handheld unit is compact and lightweight. It has dimensions of 3.37 x 1.97 x 1.15 inches and weighs less than 3 ounces. The unit is cased in a durable hard outer casing to protect the internal circuitry. The unit is operable in a wide range of temperatures (generally about -40 to +122 degrees Fahrenheit) and humidity (5% to 95% non-condensing relative humidity). The unit features a triple alarm system with bright visual alarms, a very loud audible alarm at 95 decibels, and a vibrating alarm. This helps to ensure that despite the environmental conditions (loud worksite, bright worksite, hearing protection equipment, etc.) the user can be immediately notified of prospective dangers. Each Single Gas Clip comes with a 2 year warranty (from date of activation) and a 1 year shelf life.