Gas Monitors

Single Gas

Available for the following gases:

• Versions available for combustible gas, oxygen and toxic gases
  
• Rechargeable versions for all gas types
  
• Non rechargeable versions for oxygen and toxic gases
  
• Ultra lightweight – just 80g for toxic versions
  
• Loud 95dBA audible alarm
  
• Dual colour visual alarm, red blue twin flashing LEDs
  
• Vibrating alarm
  
• IP65 and IP67 ingress protection
  
• Real time TWA and Peak display options
  
• Optional datalogging

Are your workers tired of lugging around large, bulky, heavy gas detection equipment? Are you tired of dealing with repeated equipment failures and units that are always in the shop?

• Available in CO, H2S, O2, LEL configurations
• CO, H2S, O2 models run for 3000 hours on alkaline batteries
• LEL model runs for 16 hours
• 2 year warranty
• Small and Lightweight
• High Quality and Low Cost
• Peak, STEL, and TWA alarms
Now both of these problems are a thing of the past. The 01 series are single gas monitors that are exceptionally easy to operate, with unmatched reliability. Simply install the batteries and the units are ready to operate. No complicated set up, and no hassles. Workers will be protected with three levels of alarms. Audible, Visual, and Vibration will make sure users are alerted to a dangerous condition no matter what the environment is. For example if a worker is in a particularly noisy environment they may not hear the audible alarm but they will feel the vibration and see the bright LED visual alarms. The alarms are user adjustable and can be set to any level to meet your particular situation, but come defaulted to OSHA recommended set point levels.

Are your workers constantly trashing their gas monitors by leaving them out in the rain, dunking them in water, or dropping them on the ground resulting in costly repairs?

Features

• One button operation. Works just like a computer mouse. Either single click or double click. No complicated functions to learn allows workers to start using the Tetra almost instantly.
  
• 12 hours of operation. No more instruments going dead at the end of a work shift
  
• 30 day calibration timer. Never again forget to calibrate and risk a large OSHA fine
  
• Field changeable intelligent sensor modules allows you to replace sensors without having to send the unit in for repair
  
• Rechargeable Lithium Ion or AA Alkaline versions available
  
• Rubberized casing to absorb shock, and keep dust and water out
  
• Loud and bright - 90 dba audible alarms and Red/Blue high intensity LED visual alarms will get noticed by your workers
  
• Internal Vibrating alarm at no charge
  
• TWA (time weighted average) and STEL (Short Term Exposure Limit) alarms. Now you can monitor for these two important levels set by OSHA. This is usually a costly extra feature on other monitors
  
• Datalogging capability - can be downloaded to a computer via infrared connection for doing reports and data analysis
  

• Single Gas monitor which detects one of the following gases: CO, H2S, O2, SO2, PH3, CL2, NH3, NO2, HCN, ETO, CLO2, O3, NO

• Multiple language and datalogging option
• Rugged, IP-66/67 highly water-resistant design
• Built-in concussion-proof boot
• Continuous LCD shows real-time gas concentration with backlight in low light (auto and on demand); in alarm (auto)
• LOW, HIGH, TWA and STEL alarms with adjustable set points
• Provides 95 dB tone and bright LED indication on alarm (typical)
• Internal vibrating alarm
• Compact (1.1 x 2.0 x 3.75 in. / 28 x 50 x 95 mm) and Lightweight (2.9 oz. / 82 g)
• 2-year battery life (typical) with replaceable 3V camera battery
• Simple auto-zero and calibration procedure
• Full function self-test of: sensor, battery, and circuitry integrity

How easy is the Gas Alert Extreme to use?

Alligator Clip

Highly Water Resistant

Durable

Calibration

GasAlertQuattro multi gas monitor by BW Technologies

After many years of intense research and development, BW Technologies by Honeywell introduces the state of the art Gas Alert Quattro Multigas Detector. BW Technologies aspires to be the world s leading supplier of gas detection equipment and consistently produces some of the world s greatest gas detection systems. This unit fits in perfectly with its previous designs and features an easy to operate and read user interface, intelligent flash system, and system durability. The simple portable design helps to reduce training time and costs while ensuring the highest standards of workplace safety.

One Button Operation and Easy to Read Display

The easy to use one button operation system is effective and cost efficient by reducing training costs and training time. The one button system is glove friendly and complemented by an easy to read user interface. The user interface provides intuitive constant readings of gas levels and battery status. The simple design is ideal for hazardous working conditions when users need to be aware of their environment and less concerned with complicated equipment. The easy to read user interface displays consistent and simultaneous readings of all gases, battery status, and sensor status. This information is displayed on a very easy to read display that is free of any distractors and unnecessary information.

Standard features

The IntelliFlash feature is one of the more unique aspects of the Gas Alert Quattro multigas detector. The easily identifiable illuminated indicator signals to users and those nearby that the detector is operational and functioning correctly. The top mounted flash system provides a steady and consistent green light signal at regular intervals during the time when the unit is operational. This feature eliminates the need for guesswork when in potentially hazardous working conditions.

Powered by SureCell Sensors

Utilizing the most advanced technology available, Honeywell s SureCell Sensor is a revolution in electrochemical technology. The patented cell technology is designed to detect a wide range of toxins while maintaining a resistance to common industrial gas interference errors. This focus on detection integrity improves sensor performance and reliability.

Rugged and Durable

This multigas detector was made with the high standards of durability in mind. The built in concussion proof boot protects the detector from regular every day hazards and accidental drops. The unit features durable bumpers to protect the internal circuitry and render the device resilient against abusive working conditions. As an added safety feature, the heavy-duty outer casing is dyed a vivid yellow hue. This reduces the likelihood that users might accidentally set down the device while on the workplace and walk away. The bright color is not likely to blend in to the background and acts as an additional safety feature for one of BW Technologies most intelligent gas detection designs.

Gas Alert Quattro Specifications

The Gas Alert Quattro Multigas Detector is portable (with dimensions of 5.1 x 3.2 x 1.9 inches) and lightweight (weighing less than 12 ounces). The device is also compatible with AA alkaline batteries of rechargeable battery packs. With alkaline batteries, users can expect approximately 14 hours of runtime, and with rechargeable batteries, users can expect between 18 and 20 hours. The Gas Alert Quattro is compatible with sensors for Hydrogen Sulfide, Carbon Monoxide, Oxygen, and Combustible gases at various detection and resolution ranges. The device and all of its sensors include a full two year warranty.

5 Gas Monitor with optional sampling pump

Build to order

World's most versatile and economical multi-gas monitor

• Integrated sampling pump
• SmartSample technology and powerful diaphragm pump provide reliable block detection and consistent, uniform flow
• Easy-to-read, multi-language LCD displays all four gas concentrations (H2S, CO, O2 and combustibles) simultaneously
• Visual, vibrating and audible alarm indicators
• Low, High, TWA (time weighted average) and STEL (short-term exposure limit) alarms
• LCD icons help with fast and easy notification of detector operation
• Built-in concussion-proof boot
• Simple auto-calibration procedure
• Rechargeable batteries provide enough power for a 13-hour shift
• Best in class block detection with semi-conductor pressure sensor
• Easy, one-button interface for simple operation
• Flexible user options minimize training
• Tamper-proof field operation
• Multi-language support in English, French, German, Spanish and Portuguese
• Compatible with MicroDock II automated test and calibration system
• Confined space includes Concusision-proof boot with aliigator clip, carrying holster, 1 ft. sampling probe, 10 Ft. hose and quick disconnect, 3 ft. calibration hose with quick connect, IR connectivity kit with Fleet Manager II software, 0.5 LPM Regulator, Location for 34 Liter calibration gas cylinder and detector

• Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
• Simple one-button operation
• Standard datalogger (16 hours) and eventlogger (10 events)
• Durable, stainless steel alligator clip
• Integral concussion-proof boot for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
• Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
• Provides 95 dB alarm tone and bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Backlight: in alarm (auto) and on demand reactivation
• Four alarm levels: Instant Low and High Alarm for all gases;TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
• Simple automatic calibration procedure
• Fully compatible with BW's MicroDock II automatic test and calibration system
• Records TWA, STEL and maximum exposures to gas and displays readings on command
• User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
• Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
• Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions

MCB3-04067FS-02N Multirae Pro Gas Monitor by RAE Systems

The MultiRAE Pro is the industry's only portable wireless multithreat monitor. The MultiRAE Pro's ability to simultaneously detect gamma radiation and toxic industrial chemicals (TICs/TIMs) enables responders to reduce the equipment footprint and achieve greater agility when operating downrange.

The MultiRAE Pro's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• All-in-one monitoring capabilities for radiation, VOCs, oxygen, toxic and combustible gases, up to 6 threat types at a time
• Over 25 interchangeable sensor options, including parts-per-billion PID and gamma radiation
• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface

Applications

• Civil defense (search and rescue)
• Homeland security
• HazMat response
• Military
• Semiconductor manufacturing
• Environmental

MAB3-B4C112E-421 MultiRae Lite Gas Monitor by RAE Systems

The MultiRAE Lite is the optimal one-to-six1-gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and features the broadest selection of sensor options in its class. The MultiRAE Lite can be configured to exactly meet the detection needs and compliance requirements of various countries, industries, and applications.

The MultiRAE Lite's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Over 25 interchangeable sensor options, including PID for VOCs, NDIR and catalytic for combustibles, and NDIR for CO₂
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Chemical
• Food and beverage
• Oil and gas (downstream)
• Pharmaceutical
• Telecommunications
• Wastewater treatment
• Fire overhaul

GasAlertMicro 5 IR Multi Gas Monitor by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

18100060-1 Gasbadge Pro Single Gas Monitor, CO by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

18100060-2 Gasbadge Pro Single Gas Monitor, H2S by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

18100060-3 Gasbadge Pro Single Gas Monitor, O2 by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

18100060-4 Gasbadge Pro Single Gas Monitor, NO2 by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

18100060-5 Gasbadge Pro Single Gas Monitor, SO2 by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

18100060-6 Gasbadge Pro Single Gas Monitor, NH3 by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

18100060-7 Gasbadge Pro Single Gas Monitor, CL2 by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

18100060-8 Gasbadge Pro Single Gas Monitor, CLO2 by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible