Oakton Instruments

WD-35419-12 pH 700 Benchtop Meter Only with Stand, 110/220 VAC, 50/60 Hz by Oakton

The easy-to-use, microprocessor-based pH 700 benchtop meter measures pH, mV, relative mV, and temperature. The large, dual-display LCD provides excellent visibility even from a distance. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. Meter features HOLD, ATC, and electrode diagnostics. The convenient pull-out quick reference card keeps procedures handy at all times. Meter accepts any pH or ORP electrodes with a BNC connector.

As always, our waterproof meters are IP67-rated for both dust and water intrusion. Even with no probes attached!

• Compact footprint is over 40% smaller than other benchtop meters
• Large display permits easier readout viewing
• Datalogging allows you to store and recall up to 100 data sets

WD-35604-05 CON 6+ Handheld Conductivity Meter Kit, -10 to 110°C Temperature Range and 0 to 20.00, 0 to 200.0, 0 to 2000 µS, with NIST Traceable Certificate of Calibration by Oakton

Features five measuring ranges up to 200.0 mS

These meters feature easy, push-button operation, a convenient HOLD function, and Auto-off function that shuts meter off after 20 minutes of non-use.

Meters offer two modes of five-point calibration. For quick and easy calibrations, use automatic mode with preset calibration points at the most popular values. For more flexibility, calibrate in the manual mode and set your calibration point at any value.

Set-up functions let you customize automatic temperature compensation and cell constant. The protective rubber boot helps shield your meter from drops and dings, and features a built-in stand.

CON 6+ features automatic or manual ranging across five ranges for a wide variety of applications ranging from pure water to boiler blow down water.

• High accuracy in changing temperature conditions
• Temperature readout and automatic temperature compensation (ATC)
• Calibrate the CON 6 at one point and all five ranges are covered

WD-35805-27 Gold Disk Sensor, Double-junction, Epoxy-body, Gel-filled ORP Electrode (Use with all OAKTON pH meters except pH Wand and pH/CON 10) by Oakton

Use with any meter with a BNC connector

Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

All electrodes have a BNC connector, and are 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer many other pH and ORP electrodes for specialty applications.

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Use ORP electrodes with meters that read mV to take REDOX readings

WD-35607-90 CON 150 Portable Waterproof Conductivity Meter Kit by Oakton

The CON 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you view the conductivity or TDS measurement simultaneously with temperature. Convenient auto-ranging and auto-cal functions for one calibration point per measurement range. Select a two-cell probe with a 0.1, 1.0, or 10 cell constant and automatic temperature compensation (ATC). ATC ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and probe status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

• Intuitive, user-friendly icons probe status displays cell constant
• Grip-Clip holder quickly and easily secures the probe to your beaker or container
• Expanded data logging for up to 150 data sets
• 700 hours battery life or optional universal power adapter
• Built-in stand and wall-mount option allow for easy laboratory measurement or storage

WD-35812-12 Chloride CI- Double-junction Ion-Selective Electrode (ISE) by Oakton

Double junction makes these electrodes ideal even for rugged applications

Use these economical Ion Selective Electrodes (ISEs) with the ION 510 meter, pH 2500 Ion benchtop meter, or the Ion Acorn meters. They also are suitable for use with any other ion meter, or with any meter with 0.1 mV resolution. All ISEs feature a BNC connector and 3-ft cable.

ISE solution kits contain the solutions and accessories needed for calibration, sample preparation and measurement of ion concentration and activity. All solutions are supplied with MSDS (Material Safety Data Sheet) and have a value of 1000 ppm.

• Each features a BNC connector and 3-ft cable

WD-35414-01 PC 2700 Meter with pH Electrode, Conductivity/Temp Probe, Electrode Stand, and Software, NIST Traceable Certificate of Calibration by Oakton

Your all-in-one solution for multiparameter research work in the lab!

The PC 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips

• PC 2700 measures pH, ORP, ion, conductivity, total dissolved solids (TDS), salinity, resistivity, and temperature
• Measures salinity from 0.0 to 80 ppt and resistivity from 2.000 ohms to 20.0 Mohms
• Brilliant backlit display with dynamic stability indication
• Up to 500 point memory with date-time stamp for GLP
• Output data to printer or PC
• Accepts either 2-cell or 4-cell electrodes
• Features auto-standardization, auto-calibration, and autoranging
• Calibration due alarm with password protection for setup and calibration
• Temperature coefficient of 0.000 to 10.000%
• Automatic or manual temperature compensation

WD-00654-04 pH 7.00 Calibration Buffer Solution 500 mL (1-pint) Bottle by Oakton

Choose from economical solution bottles or individually sealed pH buffer pouches.

All Oakton pH buffer solutions are freshness dated, and standardized against NIST-traceable references to ensure quality. ±0.01 pH at 25°C.

OAKTON pH buffer solution bottles are labeled with the name and CAS number for all ingredients (for Right-to-Know requirements), and are supplied with an MSDS (Material Safety Data Sheet).

OAKTON pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration. Each box contains twenty 20 mL pouches. Dimensions: 4.5"L x 5"W x 4.5"H (box). Shpg wt 1 lb per box.

• NIST traceable materials
• Labeled with pH vs temperature tables for accurate calibration

WD-35811-71 Single-junction, Epoxy-body, Gel-filled pH Electrode (Use with pH 5, pH 6, pH 510, Ion 510, pH 1100, pH 2100 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

Each All-in-One Acorn electrode features a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable.

• Includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a phono jack connector for temperature