Oakton Instruments

WD-35808-71 Single-junction, Epoxy-body, Gel-filled pH Electrode by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One Waterproof electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable.

• Includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a waterproof 6-pin connector for temperature

WD-35419-22 Ion 700 Meter with Electrode Stand, 110/220 VAC, 50/60 Hz by Oakton

Large display allows you to see measurement values at a glance

Ion 700 meter measures pH, mV, relative mV, and temperature while adding ion measurement capabilities. Ion concentration is directly read in ppm for easy use. Verify electrode operation while taking measurements with the dual ppm and mV display. Up to three ion-concentration standards (choose from 0.1, 1.0, 10.0, 100.0, or 1000.0 ppm) may be calibrated.

The easy-to-use, microprocessor-based meter features HOLD, ATC, recorder output, and electrode diagnostics. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. The convenient pull-out quick reference card keeps procedures handy at all times. The large, dual-display LCD provides excellent visibility even from a distance. Meter accepts pH, ORP, or ion-selective electrodes with BNC connectors.

• Custom 3-1/4" x 2-7/16" LCD display
• Small size conserves valuable benchspace
• Store and recall up to 100 data sets

WD-35640-30 DO 450 Portable Waterproof DO Meter and Probe by Oakton

The RDO 450 meter uses optical measurement technology offering fast response times and long-term stability with minimal maintenance. Plus automatic temperature compensation (ATC), barometric pressure compensation, and salinity correction to further ensure measurement accuracy. The large, backlit LCD lets you view % saturation or mg/L (ppm) simultaneously with temperature.

Rugged, IP67-rated waterproof housing make the meter ideal for plant or field testing. Additional features include ready (stability) indicator, smart averaging, hold function, calibration alarm, and battery-life indicator.

Perform data logging with manual or timed collection of up to 500 data sets with real-time clock time/date stamp. Order optional data cables for USB and RS-232 connectivity.

• Eliminates costly, tiresome membranes and solutions
• Rugged, IP67-rated housing for plant and field applications
• USB and RS-232 output for up to 500 data sets
• 500 hours battery life, or optional universal power adapter
• Built-in stand with wall mount allows for easy benchtop measurement or storage

WD-35625-15 Food TempTestr Mark-I IR Thermometer by Digi-Sense

Ensure your food is at the proper temperature without contamination worries!

Our TempTestr IR Food model is optimized for the food preparation industry. It offers ±1%/1°C (2°F) accuracy in the HACCP critical temperature range of 0 to 60°C (32 to 150°F). This tester s high spectral response lets you take readings through steam. Laser sighting lets you pinpoint your exact target.

• Offers high ±1°C accuracy at HACCP critical temperature ranges
• Infrared temperature measurement provides safe, noncontact readings
• Laser sighting pinpoints your exact target
• °F/°C selectable
• Simple one-handed operation just point and press button! Extremely rapid response time 1/2 second for 95% response

WD-35801-80 Flushable, Double-junction, Epoxy-body, Refillable pH Electrode (Use with pH 10, pH 100, pH 500, pH 1000, pH 2500 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer other All-in-One electrodes

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a mini phono plug connector for temperature

WD-35807-25 Solution Ground, Teflon-junction, Ryton-body pH Electrode (Use with pH 100, 200, 800, and 1000 controllers) by Oakton

A. In-line submersible electrodes feature a probe guard to protect sensor from damage. They can be placed in a tee fitting for in-line use. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

B. Submersible electrodes are permanently encapsulated in a 3-ft pipe - perfect for tank installation. ABS plastic body withstands temperatures up to 80°C.

C. Semi-domed bulb electrodes with solution ground have a unique surface design that protects electrode from particulates and increases flow across the junction to keep the bulb clean. Graphite body acts as a solution ground. Withstand temperatures up to 100°C.

D. Self-cleaning flat electrodes have an innovative flat surface that prevents solids buildup. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

E. PTFE junction electrodes are excellent for simple wastewater applications. PTFE junction and polymer gel reference electrolyte resist clogging. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

F. PTFE junction electrodes with solution ground are excellent for tough wastewater applications. Solution ground pin eliminates ground loop and electrical noise problems. PTFE junction and polymer gel reference electrolyte resist clogging. Ryton body with 3/4" NPT thread on both ends withstands temperatures up to 100°C.

• Include BNC connector
• Built-in Pt RTD sensor with stripped ends for temperature (ATC) element
• ORP electrodes feature Pt band sensor
• Use electrodes with solution ground with our pH 200, 800, or 1000 controllers in areas with high electrical noise

WD-35625-45 TempTestr® Infrared IR Food Thermometer by Digi-Sense

Ensure your food is at the proper temperature without contamination worries!

Our TempTestr IR Food model is optimized for the food preparation industry. It offers ±1%/1°C (2°F) accuracy in the HACCP critical temperature range of 0 to 60°C (32 to 150°F). This tester s high spectral response lets you take readings through steam. Laser sighting lets you pinpoint your exact target.

• Includes 9V battery, wrist strap and Instruction Manual
• Offers high ±1°C accuracy at HACCP critical temperature ranges
• Infrared temperature measurement provides safe, noncontact readings
• Laser sighting pinpoints your exact target
• °F/°C selectable
• Simple one-handed operation just point and press button! Extremely rapid response time 1/2 second for 95% response

WD-35625-41 Economic 2-in-1 Food Safety IR Thermometer by Digi-Sense

A combination contact/noncontact thermometer for all food applications

Check critical food temperatures and monitor HACCP food safety zones with this combination contact/noncontact thermometer. LED s rapidly indicate if food temperature is in the bacterial growth safety zone. Green lights indicate safe temperatures below 40°F (4°C) and above 140°F (60°C). Red light indicates the HACCP danger zone between 40 to 140°F (4 to 60°C). The contact probe swings out for internal temperature checks, then folds in for storage. IR mode provides quick, noncontact surface measurements and stores maximum reading. Target illumination indicates target measurement area and is ideal for close working distances of 2 to 12 . Countdown timer with alarm monitors cooking and cooling intervals and HACCP exposure times set countdown timer to a maximum of 8 hours.

• Go/no-go LEDs provide quick check of HACCP food zones
• Sealed IP54 housing make for easy cleaning

WD-35613-82 Ion 6+ Meter Kit, 0.0 to 100.0°C Temperature Range, 0.00 to 14.00 pH Range, ±1999 mV Range, and 0.01 to 1999 ppm by Oakton

Direct readout of ion concentration at economical prices

These rugged, economical meters are very easy to use. Features include all push-button calibration, hold function,auto-off, and splash-resistantkeypad. Read concentration in ppm and mV as well as pH and temperature in ºC. The included protective rubber boot also acts as a meter stand for benchtop use. Order ISE electrodes separately.

• Works with almost all ion selective electrodes with BNC connectors
• Reads ion concentration (ppm) pH, mV, and temperature
• Preprogrammed ion calibration points let even beginners take readings in minutes
• Hold function; Auto-off

WD-35807-20 Solution Ground, Teflon-junction, Ryton-body pH Electrode with PT 100 temp (Use with pH 100, 200, 800, and 1000 controllers) by Oakton

A. In-line submersible electrodes feature a probe guard to protect sensor from damage. They can be placed in a tee fitting for in-line use. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

B. Submersible electrodes are permanently encapsulated in a 3-ft pipe - perfect for tank installation. ABS plastic body withstands temperatures up to 80°C.

C. Semi-domed bulb electrodes with solution ground have a unique surface design that protects electrode from particulates and increases flow across the junction to keep the bulb clean. Graphite body acts as a solution ground. Withstand temperatures up to 100°C.

D. Self-cleaning flat electrodes have an innovative flat surface that prevents solids buildup. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

E. PTFE junction electrodes are excellent for simple wastewater applications. PTFE junction and polymer gel reference electrolyte resist clogging. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

F. PTFE junction electrodes with solution ground are excellent for tough wastewater applications. Solution ground pin eliminates ground loop and electrical noise problems. PTFE junction and polymer gel reference electrolyte resist clogging. Ryton body with 3/4" NPT thread on both ends withstands temperatures up to 100°C.

• Include BNC connector
• Built-in Pt RTD sensor with stripped ends for temperature (ATC) element
• ORP electrodes feature Pt band sensor
• Use electrodes with solution ground with our pH 200, 800, or 1000 controllers in areas with high electrical noise

WD-35700-10 Low-Cost Wall Mount Thermo-Hygrometer by Digi-Sense

Our most economical wall-mount thermohygrometer

This economical thermohygrometer features easy-to-read dial indicators for both humidity and temperature. Use for monitoring indoor room conditions.

• Monitor humidity and temperature
• Requires no batteries or power!

WD-35806-01 Submersible, Double-junction pH Electrode with Bulb Guard (Use with pH 100, 200, 800, and 1000 controllers) by Oakton

A. In-line submersible electrodes feature a probe guard to protect sensor from damage. They can be placed in a tee fitting for in-line use. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

B. Submersible electrodes are permanently encapsulated in a 3-ft pipe - perfect for tank installation. ABS plastic body withstands temperatures up to 80°C.

C. Semi-domed bulb electrodes with solution ground have a unique surface design that protects electrode from particulates and increases flow across the junction to keep the bulb clean. Graphite body acts as a solution ground. Withstand temperatures up to 100°C.

D. Self-cleaning flat electrodes have an innovative flat surface that prevents solids buildup. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

E. PTFE junction electrodes are excellent for simple wastewater applications. PTFE junction and polymer gel reference electrolyte resist clogging. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

F. PTFE junction electrodes with solution ground are excellent for tough wastewater applications. Solution ground pin eliminates ground loop and electrical noise problems. PTFE junction and polymer gel reference electrolyte resist clogging. Ryton body with 3/4" NPT thread on both ends withstands temperatures up to 100°C.

• Include BNC connector
• Built-in Pt RTD sensor with stripped ends for temperature (ATC) element
• ORP electrodes feature Pt band sensor
• Use electrodes with solution ground with our pH 200, 800, or 1000 controllers in areas with high electrical noise

WD-39643-00 Digi-Sense Palm-Sized Infrared Thermometer by Digi-Sense

Laser sighting and adjustable emissivity at an economical price

This infrared thermometer provides quick and accurate temperature measurements. View the current temperature, temperature scale (°F or °C), and battery life icon on the large LCD. Two battery compartments provide power to the thermometer and laser separately.

This gives the flexibility to measure temperature without the laser sighting if the laser battery is weak. Other features include selectable °F/°C, min/max measurements, lock function for continuous monitoring, automatic data hold, auto off, and battery life icon.

• Includes CR2032 batteries (2)
• Compact, ergonomic design provides a comfortable fit during use
• Fits perfectly in your hand or pocket

WD-35700-00 Wall Mount Thermo-Hygrometer with Digital Thermometer by Digi-Sense

Features a digital, °F/°C selectable thermometer

Monitor both the humidity and temperature of your office, laboratory, greenhouse, food storage or computer room. This thermohygrometer remains accurate and stable without maintenance or adjustments. Analog humidity display; 1/2"H LCD temperature display with F or C readout. Supplied with one AA 1.5 V battery, corrosion-resistant plastic case, mounting bracket, and instructions.

• Monitor humidity and temperature
• Digital temperature display with 0.1 degree resolution

WD-35700-20 Large Dial Wall Mount Thermo-Hygrometer by Digi-Sense

Huge 10" diameter display is easy to read from a distance

This large dial thermohygrometer features an attractive plastic case and blue and white dial design to make it a decorative and functional addition to the lab or office.

• Monitor humidity and temperature
• Dual °F/°C display
• Requires no batteries or power!

WD-35807-35 Teflon-junction, CPVC-body pH Electrode with Pt 100 temp (Use with pH 100, 200, 800, and 1000 controllers) by Oakton

A. In-line submersible electrodes feature a probe guard to protect sensor from damage. They can be placed in a tee fitting for in-line use. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

B. Submersible electrodes are permanently encapsulated in a 3-ft pipe - perfect for tank installation. ABS plastic body withstands temperatures up to 80°C.

C. Semi-domed bulb electrodes with solution ground have a unique surface design that protects electrode from particulates and increases flow across the junction to keep the bulb clean. Graphite body acts as a solution ground. Withstand temperatures up to 100°C.

D. Self-cleaning flat electrodes have an innovative flat surface that prevents solids buildup. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

E. PTFE junction electrodes are excellent for simple wastewater applications. PTFE junction and polymer gel reference electrolyte resist clogging. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

F. PTFE junction electrodes with solution ground are excellent for tough wastewater applications. Solution ground pin eliminates ground loop and electrical noise problems. PTFE junction and polymer gel reference electrolyte resist clogging. Ryton body with 3/4" NPT thread on both ends withstands temperatures up to 100°C.

• Include BNC connector
• Built-in Pt RTD sensor with stripped ends for temperature (ATC) element
• ORP electrodes feature Pt band sensor
• Use electrodes with solution ground with our pH 200, 800, or 1000 controllers in areas with high electrical noise