Oakton Instruments

WD-35640-60 DO 100 Portable Dissolved Oxygen Meter Kit by Oakton

No meter warm-up or polarization required so you can take dissolved oxygen measurements right away

The OAKTON DO 110 meter ensures high accuracy with independent 100% and zero adjustment calibrations, and offset adjustment capabilities. It stores and recalls 100 dissolved oxygen readings with corresponding temperature- great for field readings. This meter even displays electrode diagnostics to help determine when you need to service or replace the probe. The front keypad is water resistant. Includes a dissolved oxygen/ temperature probe, electrolyte solution, and batteries.

• Includes 30-mL of electrolyte solution, two replacement membrane caps, rinse bottle, and hard side carrying case
• Low maintenance dissolved oxygen probe comes with 10 or 25 ft. length cable
• Key in salinity and pressure manually; meter automatically calculates offset values
• Dual display shows mg/L (ppm) or % saturation plus temperature
• Hold function; Auto-off; Ready indicator

WD-00653-00 Zero Oxygen Calibration Solution 500 mL (1-pint) Bottle by Oakton

Galvanic sensing technology provides accurate readings with no warm-up required. Replaceable membrane caps make maintenance easy.

• Choose cable lengths from 10 to 100 feet.

Diameter: 1" Diameter
Dimensions: 6" Long

WD-35661-70 Deluxe Testr Calibration Kit by Oakton

Ideal for plant and field uses.

Each kit contains TDS Singles calibration pouches (two each of 447 µS, 1413 µS, 2764 µS, 15,000 µS, and rinse water); sample jar; and screwdriver all in a hard shell carrying case with room for your TDSTestr (order Testr separately).

TDS Singles are handy, single use pouches that each contain 20 ml of fresh calibration solution. Accuracy is ±1% at 25°C.

• Protective carrying case organizes meter and materials
• Includes everything you need for convenient calibration
• Calibration standards are made with NIST traceable materials

WD-00653-27 2070 µS Conductivity/TDS Calibration Solution 500 mL (1-pint) Bottle by Oakton

Choose from economical 1-pint solution bottles or individually sealed Singles calibration pouches.

All OAKTON Conductivity/TDS calibration solutions are cross checked using different test methods, premixed, and ready to use.

OAKTON conductivity/TDS solution bottles are labeled with the name and CAS number for all ingredients to conform with Right-to-Know requirements, and includes an MSDS. Solutions come in one pint bottles. Dimensions: 7.75"H x 2.25" dia. Shpg wt: 1.1 lbs.

OAKTON Conductivity Singles pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration. Pouches are labeled with equivalent values for ppm in KCl, NaCl and 442 and Conductivity values at 25°C and CAS numbers for Right-to-Know requirements. Each box contains twenty 20 mL pouches. Dimensions: 4.5"L x 5"W x 4.5"H (box). Shpg wt 1 lb per box.

• NIST traceable materials
• ±1% accuracy at 25°C

WD-00653-23 23 µS Conductivity/TDS Calibration Solution 500 mL (1-pint) Bottle by Oakton

Choose from economical 1-pint solution bottles or individually sealed Singles calibration pouches.

All OAKTON Conductivity/TDS calibration solutions are cross checked using different test methods, premixed, and ready to use.

OAKTON conductivity/TDS solution bottles are labeled with the name and CAS number for all ingredients to conform with Right-to-Know requirements, and includes an MSDS. Solutions come in one pint bottles. Dimensions: 7.75"H x 2.25" dia. Shpg wt: 1.1 lbs.

OAKTON Conductivity Singles pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration. Pouches are labeled with equivalent values for ppm in KCl, NaCl and 442 and Conductivity values at 25°C and CAS numbers for Right-to-Know requirements. Each box contains twenty 20 mL pouches. Dimensions: 4.5"L x 5"W x 4.5"H (box). Shpg wt 1 lb per box.

• NIST traceable materials
• ±1% accuracy at 25°C

WD-35643-14 DO 6+ Dissolved Oxygen Meter Kit, 0.0 to 50.0°C Tempature Range and 0.0 to 50.0 ppt, 0 to 20 mg/L Dissolved Oxygen Range by Oakton

High accuracy combined with economical pricing

These meters provide a great value. The ranges work to test water quality in wastewater, surface water, ground water, or drinking water. A clear LCD display shows results in ppm or mg/L with enunciators to aid in use and troubleshooting. Six simple buttons allow for freezing readings, toggling between display units and temperature results, setup, calibration, and automatic barometric and salinity compensation after manual parameter inputs. Additional benefits of the simple design allow you to view electrode slope, zero offset, and millivolt values for electrode diagnostics.

• Includes galvanic DO probe, membrane caps, electrolyte solution, sample bottles, protective rubber boot/stand, batteries,and hard plastic carrying case
• Low-maintenance, Galvanic probe requires no warm-up time

WD-00653-47 447 µS Conductivity/TDS Calibration Solution 500 mL (1-pint) Bottle by Oakton

Choose from economical 1-pint solution bottles or individually sealed Singles calibration pouches.

All OAKTON Conductivity/TDS calibration solutions are cross checked using different test methods, premixed, and ready to use.

OAKTON conductivity/TDS solution bottles are labeled with the name and CAS number for all ingredients to conform with Right-to-Know requirements, and includes an MSDS. Solutions come in one pint bottles. Dimensions: 7.75"H x 2.25" dia. Shpg wt: 1.1 lbs.

OAKTON Conductivity Singles pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration. Pouches are labeled with equivalent values for ppm in KCl, NaCl and 442 and Conductivity values at 25°C and CAS numbers for Right-to-Know requirements. Each box contains twenty 20 mL pouches. Dimensions: 4.5"L x 5"W x 4.5"H (box). Shpg wt 1 lb per box.

• NIST traceable materials
• ±1% accuracy at 25°C

WD-00653-20 2764 µS Conductivity/TDS Calibration Solution 500 mL (1-pint) Bottle by Oakton

Choose from economical 1-pint solution bottles or individually sealed Singles calibration pouches.

All OAKTON Conductivity/TDS calibration solutions are cross checked using different test methods, premixed, and ready to use.

OAKTON conductivity/TDS solution bottles are labeled with the name and CAS number for all ingredients to conform with Right-to-Know requirements, and includes an MSDS. Solutions come in one pint bottles. Dimensions: 7.75"H x 2.25" dia. Shpg wt: 1.1 lbs.

OAKTON Conductivity Singles pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration. Pouches are labeled with equivalent values for ppm in KCl, NaCl and 442 and Conductivity values at 25°C and CAS numbers for Right-to-Know requirements. Each box contains twenty 20 mL pouches. Dimensions: 4.5"L x 5"W x 4.5"H (box). Shpg wt 1 lb per box.

• NIST traceable materials
• ±1% accuracy at 25°C

WD-35408-02 CON 600 Portable Waterproof Conductivity Meter by Oakton

Conductivity, TDS, resistivity, salinity measure from pure water to seawater!

• Durable waterproof and dustproof design with IP67 rating Even with no probes attached
• Single or multipoint calibration; auto or manual Fast, trouble-free calibration for more accurate measurements
• Large backlit graphic display Multi-line display with electrode status indicator, calibration data, and more
• User-settable calibration due alarm Out-of-date or unperformed calibrations are now things of the past!
• Built-in real-time clock Time-and-date stamping meets Good Laboratory Practice (GLP) standards
• Advanced data management Store up to 500 data sets and download via Infrared IrDA wireless interface
• Set point alarms Audible warning when readings are outside set points limit
• Accept 2-cell and 4-cell conductivity probes Measure over a broad conductivity range up to 500 mS/cm
• Password protection Security for calibration and setup menus
• Rugged rubber boot Protects meter from bumps and dings (optional; included with kits)

WD-00653-50 15,000 µS Conductivity/TDS Calibration Solution 500 mL (1-pint) Bottle by Oakton

Choose from economical 1-pint solution bottles or individually sealed Singles calibration pouches.

All OAKTON Conductivity/TDS calibration solutions are cross checked using different test methods, premixed, and ready to use.

OAKTON conductivity/TDS solution bottles are labeled with the name and CAS number for all ingredients to conform with Right-to-Know requirements, and includes an MSDS. Solutions come in one pint bottles. Dimensions: 7.75"H x 2.25" dia. Shpg wt: 1.1 lbs.

OAKTON Conductivity Singles pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration. Pouches are labeled with equivalent values for ppm in KCl, NaCl and 442 and Conductivity values at 25°C and CAS numbers for Right-to-Know requirements. Each box contains twenty 20 mL pouches. Dimensions: 4.5"L x 5"W x 4.5"H (box). Shpg wt 1 lb per box.

• NIST traceable materials
• ±1% accuracy at 25°C

WD-35634-30 pHTestr 30 Portable Waterproof pH Tester by Oakton

Dual Display of pH and Temperature

High ±0.01 pH accuracy in a waterproof pocket-sized instrument! This unique Testr display pH and °C readings on a single large display. It also features a Double-junction electrode ideal for dirty water and solutions with heavy metals or other contaminants. Its waterproof, dustproof housing protects Testr from rugged field or plant environments.

• High ±0.01 pH accuracy
• Simultaneous pH and temperature (°C) display
• Suitable for most ASTM and EPA test procedures
• Double-junction electrode ideal for dirty water, heavy sulfides, tris buffers and organics
• Increased reference gel volume offers significantly longer electrode life
• Certifiable to IP67 standards waterproof and dustproof housing floats
• Replaceable sensor lets you reuse same meter body, saving you money
• Automatic temperature compensation
• Three point push-button calibration