BW Technologies

MCXL-XWHM-Y-NA GasAlertMicroClip XL Detector Combustible (%LEL), Oxygen (O2), Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Yellow Housing by BW Technologies

Do you require a portable and simple to operate gas monitor that can detect and measure (O2) oxygen, (CO) carbon monoxide, and (H2S) hydrogen sulfide? Maybe you need to be sure that lower explosive limits (LEL) levels are monitored constantly for safety. The 4 gas GasAlertMicroClip XL may be the perfect monitor for your needs. Unlike the XT, which has battery power for as much as 10 hours per charge, the XL has enhanced battery life which will last for 18 hours on a charge. This is an excellent feature for workers that have to put in long hours.

Thanks to IntelliFlash™ technology, it is very easy to check for compliance. And the XL will perform well in the coldest of environments and the hottest temperatures. Training your workers is a breeze as they only need to learn how to use one button. Simple operation keeps workers from being distracted on the job and this leads to greater efficiency and fewer accidents. You can use the XL with the latest Fleet Manager II programs and MicroDock II calibration and auto test systems.

• Lightweight weighs in at 190 grams (6.7 ounces)
• Inexpensive can save on equipment costs
• Very little training time required
• Easy compliance verification with IntelliFlash™
• Comfortable enough to wear all day long
• Automatic calibration
• Continuous gas readings
• When you start up the XL, it tests its sensor, battery situation, and the alarms.
• Built-in impact resistant cover
• Supports English, Spanish, French, Portuguese, and German
• IP 66 and EMC Directive 2004/108/EC compliant
• 2 year warranty

Testing Capabilities

1. Moderate danger low level alarm sounds

2. Danger is significant high level alarm

3. Short term exposure limit has been reached (STEL) maximum short period exposure

4. Time weighted average limit maximum amount of exposure for an eight hour day (TWA)

The XL Comes with:

• Clip
• Battery
• AC charger
• Test hose and cap for calibration
• CD and manual

Part Number: MCXLXWHMYNA

XT-XWHM-Y-NA GasAlertMax XT II 4 Gas Detector %LEL, O2, H2S, CO Yellow by BW Technologies

GasAlertMax XT II is the safest and most economical choice for multi-gas detection systems. Utilizing the most advanced technology on the market, the GasAlertMax accurately and reliably monitors up to four hazardous conditions, and offers a simple user friendly device for easy operation. Its standard safety features and compatibility with other instruments ensure that the gas detector is the best instrument for gas monitoring compliance.

GasAlertMax XT II specifications

The lightweight and portable unit is approximately 11.5 ounces, and features the latest technology allowing for a compact design. With an operational temperature range of -4 to 122 degrees Fahrenheit, the monitor is designed to function effectively in many harsh conditions. The cautionary yellow outer shell helps to ensure that the gas detector is carried with the user not left onsite. Additionally, the durable casing is resistant to water and features a built-in concussion proof boot.

Triple alarm system

The GasAlertMax XT II features a triple alarm system designed to alert users of potentially hazardous conditions. When the gas sensors detect specified levels of H2S, CO, O2, or combustible gases, the instrument will begin the triple alarm alert and notify users and those nearby. The device indicates these dangers with a vibrating alarm, an ultra bright visual alarm, and an audible alarm of over 95 decibels. The alarms are also designed to alert users of administrative needs such as battery replacement.

GasAlertMax XT II features

The GasAlertMax XT II has multi-language support features in English, French, Spanish, German, and Portuguese. The gas detector also has state of the art block detection with semi-conductor pressure sensor, and standard data and event logging. Accessories such as the belt holster, multi-unit cradle charger, and concussion proof boot are also available.

Upon activation, the unit will automatically test sensors, pumps, battery, and circuitry. For additional test and calibration, the GasAlertMax XT II is compatible with the MicroDock II automated test and calibration system and Fleet Manager II. Improving on its functionality, the unit is customizable. Users can change options for forced calibration and tests, safety locks, alarm setpoints, safe display mode, language choices, start-up message, and more.

The easy to read LCD screen displays continuous information about real-time gas concentrations and alarms. To maintain simplicity and ease of use, the GasAlertMax XT II also features a user and glove friendly one touch button for operation. The no-frills design has an added benefit of minimizing cost and user training. This simple, portable, and compact detector is the best instrument for confined spaces or potentially dangerous worksites.

Highest standards of reliability

The typical batter life ranges between 8 and 13 hours depending on the temperature. The durable and long lasting batteries can fully recharge in approximately 6 hours. The GasAlertMax XT II and its sensors feature a standard two year warranty. With safety and reliability as a top priority, BW Technologies has developed the multigas detector to utilize the most advanced technology on the market, while maintaining its simplicity and portability. When working in settings with possible gas exposure, users can be certain that the gas levels are being accurately and reliably monitored with the best technology available.

Part Number: XTXWHMYNA

MCXL-XW00-Y-NA GasAlertMicroClip XL Detector Combustible (%LEL), Oxygen (O2) - Yellow Housing by BW Technologies

Do you require portable dual gas monitor equipment that measures oxygen and LEL (lower explosive limit) for maximum worker safety? Is cost very important? How about ease of use and convenience? You should check out all the features and price of the GasAlertMicroClip XL.

Maybe you have heard of the GasAlertMicroClip XT or you might even be using some of them. The GasAlertMicroClip XL has all the great functions and benefits of the XT with one addition. It is made to provide longer battery life. In fact, it is 8 hours longer than the XT model (18 hrs). This is an important feature for long shifts and cold environments.

Compliance checking is simple and easy because the GasAlertMicroClip XL uses the latest IntelliFlash™ technology. In addition, a gas monitor that is simple to wear and lightweight, allows for working without distractions. And, training is very quick and simple because you only have to operate a single button. All throughout the shift, the GasAlertMicroClip works, monitoring O2 and LEL.

If you use the MicroDock II or Fleet Manager II you are in luck. The GasAlertMicroClip XL is specifically designed to work with them. You can even use XL and XT models together.

Why Include GasAlertMicroClip XL in Your Fleet?

• Light and easy to carry around it weighs just 6.7 ounces
• Full 2 year warranty (including the sensors)
• Works in temps as low as -4F
• Affordable can save you money over time
• Water resistant
• Easy and quick compliance verification
• Automatic instrument calibration
• Checks its own vital functions on start up
• Continuous O2 monitoring
• Checks LEL (lower explosive limit)
• Resistant to concussion and impacts
• Supports Spanish, English, German, French, and Portuguese
• IP 66 compliant

GasAlertMicroClip XL Comes with:

• Lithium polymer battery
• AC charger
• Stainless steel alligator clip
• Test hose and calibration cap
• Operating manual with CD

Part Number: MCXLXW00YNA

M5-XWAY-R-D-D-Y-N-00 GasAlertMicro 5 Detector %LEL, O2, H2S, CO, NH3 - NiMH Battery and Datalogging by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5XWAYRDDYN00

QT-CK-DL Deluxe Confined Space Kit for the Gas Alert Quattro

This confined space kit contains the following:

• 0.5 LPM Regulator (this is the piece that attaches to the calibration gas cylinder and allows the gas to flow from the cylinder)
• Calibration cap with 1 ft hose (This item is used for calibration and also bump checks. It snaps onto the front of the instrument over the sensor ports)
• Sampling Probe for getting into those hard to reach spaces
• IR Connectivity Kit with Fleet Manager software for downloading datalogging information and changing instrument settings
• Manual Aspirator Kit for taking remote air samples. Operation is fast and easy, simply snap one end on the instrument and drop the tubing into the confined space. Then just squeeze the bulb repeatedly to draw the air sample back to the monitor.
• Custom cut foam insert keeps everything neat and in it's place
• Durable carrying case

Note: Calibration gas must be ordered separately. If your Quattro is the most popular version containing four gases - CO,H2S,O2,LEL then you will need to order part number CG-Q34-4. If your Quattro is a different configuration please see the calibration gas page to find your correct cylinder.

SR-M-MC Replacement MICROceL Carbon Monoxide (CO) Sensor

• GasAlertMicroClip
• GasAlertMicroClip XT
• GasAlertMicroClip XL
• GasAlertMax XT
• GasAlertMax XT II

BW Technologies IR Connectivity Kit with Fleet Manager II Software

The BW Technologies IR Connectivity Kit connects your BW Technologies device to your computer. The kit also includes the Fleet Manager II Software. The software allows users to download data directly from their device to their computer. Downloading is quick and easy with the connectivity kit. From here, users can create and run a variety of reports that help with site assessments and analysis. The information can also be easily archived for future referencing.

Part Number: GAUSB1IR

Part Number: WMADOCK

Part Number: DXENBLNA

Part Number: CGQ344

Part Number: MC2FC1B

DOCK2-2-1F-00-G MicroDock II Automatic Test and Calibration Station with GasAlertClip Extreme SO2 Module and 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221F00G

• Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
• Simple one-button operation
• Standard datalogger (16 hours) and eventlogger (10 events)
• Durable, stainless steel alligator clip
• Integral concussion-proof boot for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
• Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
• Provides 95 dB alarm tone and bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Backlight: in alarm (auto) and on demand reactivation
• Four alarm levels: Instant Low and High Alarm for all gases;TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
• Simple automatic calibration procedure
• Fully compatible with BW's MicroDock II automatic test and calibration system
• Records TWA, STEL and maximum exposures to gas and displays readings on command
• User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
• Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
• Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions

DOCK2-2-1E-00-G MicroDock II Automatic Test and Calibration Station with GasAlertClip Extreme H2S Module and 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221E00G

Part Number: HOSE165

QT-XWHM-R-Y-EU GasAlertQuattro 4-Gas Detector, % LEL, O2, H2S, CO, Rechargeable Version - Yellow Housing, EU Version (Europe) by BW Technologies

BW Technologies by Honeywell introduces an industry leader in design simplicity and user friendliness. The Gas Alert Quattro multigas detector is backed with years of research and development. The design pays particular attention to the needs of users when on the worksite, and eliminates unnecessary design elements that distract users and complicate equipment training. With this simple and easy to read gas detection system, safety managers can reduce training time and costs with confidence.

User Friendly Features

Alarms and Automatic Tests

Specifications & Compatible Accessories

BW Technologies by Honeywell

Part Number: QTXWHMRYEU

XT-XW00-Y-NA GasAlertMax XT II 2 Gas Detector %LEL, O2 Yellow by BW Technologies

GasAlertMax XT II is the safest and most economical choice for multi-gas detection systems. Utilizing the most advanced technology on the market, the GasAlertMax accurately and reliably monitors up to four hazardous conditions, and offers a simple user friendly device for easy operation. Its standard safety features and compatibility with other instruments ensure that the gas detector is the best instrument for gas monitoring compliance.

GasAlertMax XT II specifications

The lightweight and portable unit is approximately 11.5 ounces, and features the latest technology allowing for a compact design. With an operational temperature range of -4 to 122 degrees Fahrenheit, the monitor is designed to function effectively in many harsh conditions. The cautionary yellow outer shell helps to ensure that the gas detector is carried with the user not left onsite. Additionally, the durable casing is resistant to water and features a built-in concussion proof boot.

Triple alarm system

The GasAlertMax XT II features a triple alarm system designed to alert users of potentially hazardous conditions. When the gas sensors detect specified levels of H2S, CO, O2, or combustible gases, the instrument will begin the triple alarm alert and notify users and those nearby. The device indicates these dangers with a vibrating alarm, an ultra bright visual alarm, and an audible alarm of over 95 decibels. The alarms are also designed to alert users of administrative needs such as battery replacement.

GasAlertMax XT II features

The GasAlertMax XT II has multi-language support features in English, French, Spanish, German, and Portuguese. The gas detector also has state of the art block detection with semi-conductor pressure sensor, and standard data and event logging. Accessories such as the belt holster, multi-unit cradle charger, and concussion proof boot are also available.

Upon activation, the unit will automatically test sensors, pumps, battery, and circuitry. For additional test and calibration, the GasAlertMax XT II is compatible with the MicroDock II automated test and calibration system and Fleet Manager II. Improving on its functionality, the unit is customizable. Users can change options for forced calibration and tests, safety locks, alarm setpoints, safe display mode, language choices, start-up message, and more.

The easy to read LCD screen displays continuous information about real-time gas concentrations and alarms. To maintain simplicity and ease of use, the GasAlertMax XT II also features a user and glove friendly one touch button for operation. The no-frills design has an added benefit of minimizing cost and user training. This simple, portable, and compact detector is the best instrument for confined spaces or potentially dangerous worksites.

Highest standards of reliability

The typical batter life ranges between 8 and 13 hours depending on the temperature. The durable and long lasting batteries can fully recharge in approximately 6 hours. The GasAlertMax XT II and its sensors feature a standard two year warranty. With safety and reliability as a top priority, BW Technologies has developed the multigas detector to utilize the most advanced technology on the market, while maintaining its simplicity and portability. When working in settings with possible gas exposure, users can be certain that the gas levels are being accurately and reliably monitored with the best technology available.

Part Number: XTXW00YNA

BWC2-S BW Clip 2 Year Single Gas Detector, Sulfur Dioxide (SO2), Low - 5 ppm / High - 10 ppm by BW Technologies

Do you need a portable SO2 gas detector that is user friendly and durable? The maintenance free BWC2-S is designed to give you safe and dependable operation for two full years. It contains all you need for accurate sulfur dioxide detection.

To use your gas detector, just turn it on, and that is it. No calibration or battery charging is needed. In fact, you never change batteries. This gives you dependable gas detection without downtime.

You may use your BWC2-S with Fleet Manager II programs, and MicroDock II or IntelliDoX systems for instrument managing. It has Reflex Technology™ for daily self diagnostics and Surecell™ for fast performance.

Configuring the BWC2-S

• Chirp for non compliance
• Adjustable set points and parameters as long as the unit is in operation
• If you want to use the noncompliance indicator feature, it can be set to flash red each time you need a bump test.
• You can adjust the monitor to give you the gas reading when it sounds an alarm.
• The monitor will also function as a clock when you set the display for the time.

Why Invest in the BWC2-S for Gas Detection?

• Easy recordkeeping
• Test multiple units at once
• No maintenance battery and sensor last as long as the unit
• Can perform in all kinds of harsh conditions (122F to -30F)
• Light and convenient to carry weighs less than 1/4 pound
• Easy operation just one button
• Auto-test features
• Easy to see wide angle flashing alarm
• Autolog last 35 events and bump tests
• Low operation and ownership costs
• Audible, vibrating, and visual alarm

The BWC2-S comes with two reservoir Surecell™ sensor technology that delivers improved response time, performance, and long life. Compared to a standard electromechanical sensor, the Surecell™ outperforms hands down.

Part Number: BWC2S

Part Number: M5BAT08

MCXL-00H0-B-AU GasAlertMicroClip XL Detector, Hydrogen Sulfide (H2S) - Black Housing, AU Version (Australia) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXL00H0BAU

Part Number: REG1.0

BWC2-H BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 10 ppm / High - 15 ppm by BW Technologies

Are you looking for a cost effective and reliable H2S detector to keep workers safe and compliant? The BW Clip BWC2-H is one of the easiest to operate and most dependable portable gas detectors on the market today. In fact, it is designed to deliver maintenance free operation for an entire two years. It is simple to use and there is no need to calibrate. It never needs new batteries or battery charging, and the sensor never needs replacing. It provides a low level alarm at 10 ppm and high level at 15 ppm.

MicroDock II and Fleet Manager II compatible and the BW Clip BWC2-H will fit right in with your IntelliDoX instrument management system, and you'll enjoy a host of benefits from BW clip units with IntelliDoX technology, such as:

• Testing for 5 units at one time
• Extremely fast bump tests (fastest in the industry)
• Parameter and alarm set point adjustment
• Email notices and easy recordkeeping

BW Clip includes:

• Self test function thanks to Reflex Technology™ your gas sensor will test itself every day to ensure safety, instill worker confidence, and limit downtime.
• Dual reservoir design with Surecell™ technology, you have much faster response time and performance than standard electromechanical sensors. In addition, you'll receive excellent performance in the harshest of work environments.

Standard features includes:

• Lightweight and compact
• Maintenance free (one push button) operation
• 3 function alarm flashes, vibrates and loud 95 decibel sound
• Self testing battery, electronics, and sensor
• Low operating costs
• Rated for extreme temperatures and environments
• Logs last 35 H2S events and bump tests

Configuration Options:

• Flashing red noncompliance indicator - enable bump test due or gas event
• Set both low and high alarm set points prior to activation
• Gas reading can be given with alarm
• Bump test reminder can be set by user
• Display can include the current time of day

Part Number: BWC2H

BWC2-X BW Clip 2 Year Single Gas Detector, Oxygen (O2), Low - 19.5% vol. / High - 23.5% vol. by BW Technologies

If you must monitor the oxygen in a work environment, you need the most accurate monitors you can buy. However, it's also necessary to have something that is light, portable, and simple to use. This makes it much easier on your workforce. The BW Clip BWC2-X is designed with these features in mind, and it is an affordable solution for portable O2 monitoring, that meets OHSA specifications.

The BWC2-X operates with the touch of a button and is so easy to use. Some monitors require battery charging and sensor changing periodically, but not the BWC2-X. Everything is built in and the monitor lasts for 2 full years of operation. Plus you also have six months of storage that extends its life, if needed. Once you activate and turn on the unit, it works constantly checking the air for oxygen levels. If they get below 19.5 percent, you receive an alarm, and over 23.5 percent sounds an alarm (default settings).

Compatible with MicroDock II and Fleet Manager II

• No computer necessary
• Testing for 5 monitors
• Simple fleet management
• Parameters and alarms can be adjusted
• Fast bump tests

Reflex Technology™ and Surecell™

• Surecell™ - Monitors oxygen levels in a wide range of temperatures. Functions in temperatures up to 122 Fahrenheit and cold environments with temperatures -4F (-20C).
• Reflex Technology™ - auto testing provides increased worker confidence and safety. Every day the monitor performs on board diagnostics.

Features:

• 2 year warranty
• Small, light, and compact
• Affordable
• One button operation that is tamper proof
• Loud 95 decibel alarm vibrates and flashes red can be seen 360 degrees.
• Tracks as many as 35 tests and readings

Options

Part Number: BWC2X