All Products

90002-03 Traceable Time and Date Digital Thermometer with Calibration; 1 5-mL Bottle Probe by Digi-Sense

Ideal for monitoring temperature in the lab, home or office. Thermometer includes a remote probe with 6-ft (1.8m) cable to measure outdoor temperature and an internal sensor to measure indoor temperature. Display can be changed to show probe or ambient temperature, time of day, and month/day.

Thermometer can also display the exact time and date when the minimum and maximum temperature occurred. The temperature sensor performs accurately in most environments even including under water. Use rear stand to place unit on table or attach to wall via hook-and-loop strip or the two rear-mounted screw holes.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Model 90002-03 is supplied with a 5 mL bottle probe specifically designed to fit into a tray. The temperature sensor is enclosed in a bottle, which protects it from rapid temperature changes when refrigerator door is opened.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Simultaneously displays temperatures and time
• Wire mounting bracket permits easy probe placement
• Features a 5 mL bottle probe

Includes

NIST-traceable calibration certificate with data and one AAA alkaline battery

4421-1-2 4400-C 4-channel Controller Panel with Two ZD 21 Transmitters by GfG

The 4100 one-channel and the 4-channel 4400 gas warning systems offer safe and reliable gas detection.

Alarm points

Each alarm can be adjusted separately. False alarms are eliminated with the adjustable alarm delay. The alarm point values can be freely adjusted within the detection range of the transmitter. Every alarm point value can be selected to be latching / non-latching or resettable / non resettable.

Alarm relays

The controller provides four voltage-free relays for the three alarms in addition to one fault warning. The relays may be used to control additional alarm devices like lights or horns. They can even prompt specific counter measures to prevent or limit dangers from gases or vapors.

Features

• Complete 1-to-4 channel controller / gas monitoring system
• 110 VAC or 24 VAC
• Case-mounted horn / strobe
• Security lock
• Slim-line design

Additional features

The 4100 control panel stores peak values and offers an additional 4-20 mA output. The 4400 control panel offers the ability to connect up to 4 transmitters and comes standard with an additional 24 VAC output for solenoid control.

DOCK2-2-1N-00-N MicroDock II Automatic Test and Calibration Station and Docking Module without Charging Cable by BW Technologies

BW Technologies Base Station and Docking Module without charging cable is a BW Technologies accessory that improves the operation and lifespan of the compatible gas detection device. The docking station safely houses the device during calibration, charging, and testing. It will also indicate the charging status on the device. BW Technologies manufactures a variety of accessories for its product offerings. Consult your devices specifications to see which accessories are offered.

Part Number: DOCK221N00N

Monitor 4ECUSB Handheld Radiation Alert Detector with Mini-USB Option by SE International

The M4 and M4EC are compact, ergonomic, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more linear reading for gamma and x-rays (above 40 keV). Click here for Monitor 4 without USB option.

6010MK Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 600P pH electrode

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

Part Number: S104930VN

GHS1268 Exploding Bomb Pictogram Placard (10.75" x 10.75") by GHS Safety

These large format HazCom GHS Pictograms are 10.75" x 10.75" (273 mm x 273 mm) and perfect for marking your containment vessels or tanks. Printed on outdoor grade peel and stick vinyl with durable fade resistant inks, these pictograms are made to withstand the elements.

They come with a back split liner for easy application and are sold individually or in packages of 100.

3015-5532 CO2-MZ 8 Zone Carbon Dioxide Monitor with Remote Display, 120-240 VAC / 50/60Hz Input Power by Bacharach

Bacharach's Multi-Zone Gas Leak Monitors offer superior performance, flexibility and functionality for low level continuous monitoring of refrigerant gases used in most commercial systems including: Chlorofluorocarbons (CFC), Hydrochlorofluorocarbons (HCFC), Hydrofluorocarbons (HFC), Ammonia (NH3) and Carbon Dioxide (CO2). These state-of-the-art fixed gas monitors lead the industry in performance, integration capabilities, initial cost and cost of ownership. Capable of detecting more than 38 refrigerant gases, the Multi-Zone system is compliant with ASHRAE standard 15-2007, is ETL Energy Saving Listed, meets California Code Regulations for Refrigerant Monitors and is EN 14624 and CE certified.

Bacharach Multi-Zone Monitors provide continuous detection of refrigerant gas levels in up to 16 separate test zones and can be fitted with an optional two channel 4-20 mA current loop board for connection to remote monitoring equipment. Multi-Zone monitors retain a log of previous readings that can be easily accessed for analysis. Four relay contacts are provided that can be programmed to trigger external alarm devices in the event of a system fault, or if a leak (small), spill (medium) or evacuation (large) level of gas is detected, while audible and visual front panel indicators show alarm and fault conditions. With only minor periodic maintenance, such as the occasional replacement of filters, and active diagnostics that continuously check the system for proper operation, Multi-Zone monitors help maintain your equipment efficiency, promote safety and protect the environment.

Ideal for Chillers, Grocery Stores, Mechanical Rooms Physical Plants, Refrigeration Racks, Walk-In Freezers

Features & Benefits:

• Proprietary infrared sensing technology virtually eliminates false alarms and extends sensor life
• No calibration required
• Low detection limits enable leaks to be found early reducing energy and refrigerant consumption
• Fastest sampling rate with the longest sampling distance in the industry at 1,200 feet
• Large Graphic LCD for easy set-up and real-time monitoring

6383 Differential Pressure Panel Transmitter with optional T/RH - standard panel housing metal by Testo

The differential pressure transmitter testo 6383 was developed specially for monitoring low differential pressures in the measuring range from 10 Pa to 10 hPa. In cleanroom technology, the maintenance of positive pressure prevents the entry of contaminated air in critical zones. Thanks to an optional internal or external probe from the probe series 6610, the additional recording of humidity and temperature with one instrument is also possible.

The testo 6383 is particularly outstanding thanks to the automatic zero-point adjustment which ensures high accuracy and long-term stability.

The integrated self-monitoring and early warning function also guarantees the operator high system availability.

• Measurement of differential pressure; optional: humidity and temperature
• Flat housing allows flush surface integration in the cleanroom wall
• Ethernet, relay and analog outputs allow optimum integration into individual automation systems
• Self-monitoring of the transmitter and early warning function guarantee high system availability
• The P2A software for parameterization, adjustment and analysis saves time and costs in commissioning and maintenance
• Configurable alarm management with adjustable response delay and alarm acknowledgement

1316009 G311 Single Gas Detector for Methane (Natural Gas), Propane, and Other MOS Detectable VOCs, with 4 AA Alkaline Batteries by GfG

Pinpoint the Smallest Leaks

Small leaks in pipes or storage tanks can release enough gas to build up dangerous concentrations. The careful inspection of flanged, threaded and soldered connections before and after installation will ensure equipment and worker safety. The G300 leak detector will make leakage sprays a thing of the past

Clear and simple displays and warnings

Changing gas concentrations are indicated audibly and visually. The frequency of the audible warning rises with gas concentrations, allowing the user to pinpoint leaks. The bar graph display will warn the user if dangerous gas concentrations arise.

Light, compact and durable

Designed for one-handed operation, the G300 reacts to concentrations as small as 5 ppm and measures up to more than 10,000 ppm or 1% volume. The sensor is located at the end of a flexible gooseneck or a helix cable to allow the user to reach difficult or unreachable locations. The G300 is available with or without explosion protection for ammonia and combustible gases. The G311 operates on four "AA" alkaline batteries. All others have a rechargeable battery with run times of more than eight hours.

Features

• Small, light, and durable leak detector
• For combustible gases and ammonia
• More than 8 hours of continuous operation
• Explosion-proof models available

Standard Accessories

• G300 Detector
• Specified sensor
• Alkaline batteries or rechargeable NiMH battery pack as specified
• Charger (with rechargeable battery pack only)
• Fixed gooseneck (with alkaline battery pack only)
• Manual

0563 2065 206 pH1 Starter Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH1 probe head for liquids, incl. storage cap with gel, calibration dosing bottles 250 ml pH 4 and 7
• TopSafe
• Belt/wall holder
• Aluminium case

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

VTS-M1233001101 Ventis MX4 Personal Gas Monitor, CH4 (0-5%), CO, H2S, O2, Alkaline Battery, No Pump, Orange, UL/CSA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

810 Fiber Optic Inspection Tool by Test Products International

Use the 810 to perform non-invasive visual inspections of equipment including heat exchangers.

The 810 is a fiber optic inspection tool used to look in confined or internal constricted areas previously deemed inaccessible. The 810 has a built-in LED light source for illuminating the viewing area and a 45 degree mirror for looking at sides and walls. Is is easy to use and fits comfortably in your hand

Features

• Hi-resolution 8,000 pixel image offers enhanced vision and clarity
• Obedient wand maintains position after adjustment and protects fiber optic bundle
• Sealed tip for use in for noncorrosive liquids
• Optional LED light source to detect UV dye
• Machined aluminum housing is rugged and durable
• Super bright LED flashlight light source provides longer battery life with no bulb replacement necessary
• Coated flexible fiber optic cable for accessibilityto tight areas with bends and curves
• 45° Glass inspection mirror for side viewing
• One-hand focus adjustment
• Compact aluminum carrying case with locking latches
• One year limited warranty

HVAC

• Perform non-invasive inspections of heat exchangers
• Examine heating and cooling ductwork integrity
• Check for blocked evaporator coils in air conditioning equipment
• Inspect boilers without costly disassembly
• Look inside oil burning furnaces for igniter components
• Use to show customers visual evidence of a cracked heat exchanger

Industrial

• Inspect the integrity of weld in pipes and tanks
• Examine gear and bearing surfaces without equipment disassembly
• Perform motor inspection and diagnostics

Home Inspection

• Check the quality of pipes and ducts
• Inspect wire integrity and placement
• Look inside walls and crawl spaces
• View insulation in walls or attics

*Please note we can only ship RKI products to customers within the United States

8100-3B STRIKER EP High Performance LED Lighthead, All in One Long Handle, 100' Cable, Explosion Proof Plug by Western Technology

Shine a light on the darkest of work site conditions with The STRIKER™: 8100 LED, the ultimate explosion proof long handle work light. From typical hand-held use to hook mounting this versatile light harnesses the best of portability and durability for almost any application! Part of our Kick-It Tough™ Explosion Proof Lighting!

Features

• Blasting, Drop Light, Inspection, Painting ... One Work Light, Many Applications!
• Approved for: Class I, Div 1 & 2; Groups C & D
• Approved for: Class II, Div 1 & 2; Groups E, F, & G
• Approved for: CSA Zones 1 & 2; Zones 20, 21, & 22
• Rated for use in Canada
• Certified portable luminary
• Complies with explosion proof/hazardous location requirements
• XP-G Cree LED
• 7 Cool White LEDs emitting color at ~6000K with CRI of 70
• >1,750 lumens
• Standard Optic 50 degree refractive
• Optional Optics: 30, 45, or 60 reflective
• Temperature Rating: T5 (-40C to +40C) / T4 (-40C to + 100C)
• Options: Mounting Hook, Diffuser