All Products

DEP-01-XX-R Detective + Transportable 4-Gas Area Monitor, CH4 % LEL, O2, H2S, CO (H2 Filtered) Pumped, Extended Battery with Rigid Legs by Crowcon

Detective+ is now wireless. Detective Net is a wireless module that gives you up to 100 meters range excluding the use of cables. The Detective Net modules can also be used as a repeater giving you a stronger signal in those areas that are built up and that have issues with signal strength. Detective Net is backwards compatible enabling use with all version of Detective and Detective+, so it can be used on your existing fleet.

Designed for group protection, area monitoring and providing a virtual fenceline, Detective+ is a rugged, interconnectable, multigas temporary area monitor.

Building on Crowcon's experience in pioneering this category of detector, Detective+ has earned a reputation for reliability and versatility in demanding environments stretching from offshore platforms to the sands of the Middle East.

Rugged and robust, Detective+ features either fixed or folding legs and a protective frame that allows stacking for easier storage.

Available with an optional internal pump for sampling versatility, alarms are announced with an extremely loud sounder, while multiple beacons ensure 360 degree visibility.

Detective+ may now also be equipped with infra-red (IR) sensors, providing either CO2 detection, or allowing higher levels of flammable gas monitoring. IR sensors also provide immunity to the poisoning effects which standard flammable gas sensors can suffer from. This extends sensor life and further increases measurement confidence in tough applications such as water treatment plants and certain chemical or hydrocarbon processing facilities.

Versatile and user friendly

• Infrared sensors available
• Built in pump option
• Clear display
• Allows sampling of highly flammable gas levels and carbon dioxide
• Unaffected by poisoning
• Provides fast response and extra sensor protection
• Provides sampling versatility
• Provides clear information, allows identification of gas hazard

Rugged, tripod design

• Raised sensor apertures
• Folding or fixed leg options
• IP65 specifications
• Prevents water ingress
• Allows stacking for easier storage and transportation
• Provides excellent sensor protection

Loud and clear alarms

• 25 Detective+ units may be linked together, up to 100m from adjacent units
• Units sending an alarm flash faster
• Audible and visible confidence blip
• Vivid red LED clusters for visual alarm
• Multiple beacons
• All linked Detective+ units indicate an alarm sensed by any one unit
• Provides effective warning of gas hazards
• Ensures 360° visibility

DSP-07-XX-R Detective + Transportable 4-Gas Area Monitor, Flammable IR CH4 0-100% LEL, O2, H2S,CO (H2 filtered) Pumped, Standard with Rigid Legs by Crowcon

Detective+ is now wireless. Detective Net is a wireless module that gives you up to 100 meters range excluding the use of cables. The Detective Net modules can also be used as a repeater giving you a stronger signal in those areas that are built up and that have issues with signal strength. Detective Net is backwards compatible enabling use with all version of Detective and Detective+, so it can be used on your existing fleet.

Designed for group protection, area monitoring and providing a virtual fenceline, Detective+ is a rugged, interconnectable, multigas temporary area monitor.

Building on Crowcon's experience in pioneering this category of detector, Detective+ has earned a reputation for reliability and versatility in demanding environments stretching from offshore platforms to the sands of the Middle East.

Rugged and robust, Detective+ features either fixed or folding legs and a protective frame that allows stacking for easier storage.

Available with an optional internal pump for sampling versatility, alarms are announced with an extremely loud sounder, while multiple beacons ensure 360 degree visibility.

Detective+ may now also be equipped with infra-red (IR) sensors, providing either CO2 detection, or allowing higher levels of flammable gas monitoring. IR sensors also provide immunity to the poisoning effects which standard flammable gas sensors can suffer from. This extends sensor life and further increases measurement confidence in tough applications such as water treatment plants and certain chemical or hydrocarbon processing facilities.

Versatile and user friendly

• Infrared sensors available
• Built in pump option
• Clear display
• Allows sampling of highly flammable gas levels and carbon dioxide
• Unaffected by poisoning
• Provides fast response and extra sensor protection
• Provides sampling versatility
• Provides clear information, allows identification of gas hazard

Rugged, tripod design

• Raised sensor apertures
• Folding or fixed leg options
• IP65 specifications
• Prevents water ingress
• Allows stacking for easier storage and transportation
• Provides excellent sensor protection

Loud and clear alarms

• 25 Detective+ units may be linked together, up to 100m from adjacent units
• Units sending an alarm flash faster
• Audible and visible confidence blip
• Vivid red LED clusters for visual alarm
• Multiple beacons
• All linked Detective+ units indicate an alarm sensed by any one unit
• Provides effective warning of gas hazards
• Ensures 360° visibility

64032 PS200 3-Gas Personal Safety Monitor - LEL/O2/CO, Non-Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

64132 PS200 3-Gas Personal Safety Monitor - LEL/O2/CO, Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

18100060-2 Gasbadge Pro Single Gas Monitor, H2S by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.

44522 Gasurveyor 522 4 Button Portable Gas Detector - PPM, LEL, VOL, O2 by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

73-0041RK-02 Gaswatch 2, Model GW2X Single Gas Personal Monitor, 0 - 40% vol. O2 with Watch Band by RKI Instruments

RKI Instruments utilizes the latest technology and research to develop a wide range of workplace safety products. As an industry leader in advanced micro sensor technology, their designs are typically compact, efficient, and affordable. The company has a long-standing track record for innovative technologies and their robust research and development team is constantly seeking new ways to meet the needs of hazardous jobsites. The new GasWatch 2 by RKI Instruments is paving the way for workplace safety products. Its compact design and high portability ensure that the device is always accessible and its dependence on advanced technology guarantees its reliability and accuracy.

GasWatch 2

The GasWatch 2 features an easy and convenient method for monitoring single gases. With three gases to choose from (carbon monoxide, oxygen, and hydrogen sulfide), users can receive a fast and accurate response. Each individual gas sensor is color coded for quick reference and convenience. The unique space saving device fits directly on the wrist similar to a watch. The hands free device monitors the environment for the atmospheric condition and alerts the wearer in accordance with its settings. Its micro sensors use galvanic and electrochemical technology to monitor the air quality. They are inexpensive and are made to be easily replaced while in the field. They also have a life expectancy of over 2 years.

Features

The GasWatch 2 is regulated by advanced microprocessor technology for reliable and accurate readings. Additionally, the gas watch has a triple alarm feature to notify wearers of dangerous conditions. The flashing lights, audible buzzer, and vibration alert is sure to be noticed on the jobsite. The large digital LCD display screen with a backlight will also automatically activate and provide a readout of the gas conditions, PEAK, TWA, and STEL readings. The unit also notifies wearers of possible equipment malfunction. As can be expected, it also tells time.

Although the GasWatch 2 is designed for convenient use on the wrist, the device may also be worn on a belt, hard hat, or protective gear. RKI Instruments makes compatible clips for customers to use when wearing the GasWatch 2.

GasWatch 2 Specifications

Weighing in at approximately 2 ounces, the GasWatch 2 is extremely compact with dimensions of 2.5 W x 1.7 H x 0.9 D. The power source is one coin lithium battery (CR2450). The long life battery can operate for over 3,000 hours or 1 year of normal use with no alarms or backlighting. A typical response time for the unit is approximately 20 seconds for oxygen and 30 seconds for hydrogen sulfide and carbon monoxide. To preserve the integrity and security of the device, the unit is housed in a high-impact casing that is dust proof and weather proof.

The GasWatch 2 has been rated intrinsically safe and comes standard with a 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

72-PAG-E GX-3R Pro 5 Gas Personal Monitor, LEL/Oxy/H2S/CO/NH3, with Li-Ion battery by RKI Instruments

The GX-3R Pro is the world's smallest 5-gas monitor weighing only 4.58 ounces and fits in the palm of your hand (2.9" W x 2.6" H x 1.06" D). It simultaneously monitors and displays 5 different gases. In addition to monitoring standard confined space gases, LEL, O₂, CO, & H₂S, the GX-3R Pro has a 5th channel where you can add infrared or toxic sensors. Two of the four sensor slots have interchangeable sensors providing flexible configurations, which can easily be changed in the field.

The GX-3R Pro comes equipped with Bluetooth wireless communication, man-down alarm, the choice of alkaline or rechargeable power supply, and a 3 year warranty. The Lithium-ion battery pack will operate for 25 hours and will fully charge in 3 hours.

The GX-3R Pro utilizes Bluetooth communication to display direct gas readings from the instrument to a phone app, which is available free on either iOS or Android phones. Automatic notifications can be programmed to send text or email messages, if there is an alarm event from the GX-3R Pro.

Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it's 3 LED lights every 30 seconds in the following conditions; if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The 30 second interval is adjustable.

Features

• Smallest & lightest 5 gas monitor: 2.9" W x 2.6" H x 1.06" D , 4.58 ounces
• Simultaneous detection of 5 gases: LEL, O₂, H₂S, CO, and other optional sensors; H₂ Compensated CO sensor available
• Simple 2-button operation
• Bluetooth communication with iOS & Android App
• Non-Compliance Indicator
• 3 user adjustable alarm levels
• Panic Alarm - Tap instrument twice
• Man Down Alarm
• Impact resistant body
• Large full dot, auto-backlit display with auto-rotation
• Stealth mode for law enforcement
• Field replaceable sensors & filters
• Water and dust resistant design, IP66/68
• 3 Year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries/petrochemical
• Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction

*Please note we can only ship RKI products to customers within the United States

3703-100 Dynagard Stand-alone System, Hydrogen Sulfide (H₂S) by GfG

Single-point Area Monitors

Dynagard AutoCal^® monitors are single point detection instruments that accurately measure toxic gases and oxygen levels. Alarm lights on the front panel illuminate and an internal horn sounds when gas concentrations are exceeded.

Simple and effective

The units accurately display values on a large backlit LED and can transmit a linear 4-20 mA output. AutoCal® calibration and maintenance is done effortlessly through front panel push-buttons. Smart sensors enable the user to change measuring ranges or gas types in the field without a need for additional programming. The Dynagard is equipped with onboard relays for two adjustable alarm points. It also has one sensor fault for local connection and activation or deactivation of external devices like strobes, fans, auto dialers etc.

Features

• AutoCal® automatic calibration
• Smart sensor technology
• Digital display / control connection
• Internal push-button alarm settings

M5IR-XWBY-R-D-D-B-N-00 GasAlertMicro 5 IR Detector CO2 (IR), % LEL, O2, H2S, CO - Rechargeable Battery - Black Housing by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5IRXWBYRDDBN00

DOCK2-2-1L-00-N MicroDock II Automatic Test and Calibration Station with GasAlertMicroClip Module (Charging) No Power Supply by BW Technologies

The most cost effective way to manage the calibration and bump testing of BW's portable gas detectors is through the MicroDock II automated test and calibration system. Fully portable and easily expandable, the MicroDock II requires no computer and provides simultaneous management of up to ten modules. Minimize expenses and maximize productivity with the MicroDock II.

• Quick and easy compliance - automatically maintain accurate records
• Automatic bump testing, calibration, record keeping and charging
• One base station with one AC outlet supports up to ten modules to suit your application

MicroDock II Features:

• Fully automatic "hands-free" calibration and functional bump testing
• Automatically verifies performance of audible and visual alarms
• Stores and updates calibration records in the MicroDock II, as well as in datalogging instruments
• Entirely self-contained with no computer required
• Lightweight and fully portable with optional wall mount
• Operates via 6V line power or a set of four C-cell batteries
• Fully customizable
• Add extra self-contained docking modules to system via simple, plug-in connections - no external pressure transducers or gas lines necessary
• Simple, accurate record keeping and fleet management
• Verifies proper performance of detectors
• Reduces maintenance costs
• Multiple MicroDock II systems can be connected via a LAN
• Includes BW Fleet Manager software for easy data analysis
• Multi-language support in English, French, German, Spanish and Portuguese

Part Number: DOCK221L00N

M5IR-XWBH-R-P-D-Y-N-00 GasAlertMicro 5 IR Detector CO2 (IR), %LEL, O2, H2S - NiMH Battery, Pump and Datalogging by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5IRXWBHRPDYN00

65-2442RK-1000 S2 Series Hydrogen (H2) Specific 0 - 1,000 ppm Sensor/Transmitter with Explosion Proof J-box, UL Version by RKI Instruments

Having a reliable gas sensor is detrimental to the safety and security of workers in potentially unstable work environments. In many cases, the decision to use a gas detection device with a reliable sensor can be the difference between life and death. RKI Instruments understands the reliability of gas sensors should be a top priority for workplace safety managers. Their team of experts works diligently to incorporate the most advanced technologies with the highest industry standards.

For nearly 20 years, RKI Instruments has worked in the gas detection industry. Its line of products leads the industry in innovation and technology. Every year, the company commits to achieving a higher level of productivity and delivering the best gas detection products on the market. With the introduction of their high performing, low cost S2 Sensor Transmitter, RKI is fulfilling that commitment.

S2 Sensor/Transmitter

The RKI S2 Sensors and Transmitters use state of the art sensor technology to detect common gas hazards. Their efficient design and cost effectiveness make them an industry choice for atmospheric monitoring. The sensor transmitters can be used in both indoor and outdoor conditions and are designed to interface with RKI controllers or PLC/DCS systems.

The sensors are available in explosion proof casing for monitoring LEL, H2 specific, oxygen, H2S, CO2, and carbon monoxide. These sensors also have flame arrestors and are approved for use in hazardous environments. The oxygen, H2S, CO, and CO2 sensors are available in non-explosion proof models. The sensors provide highly specific and quick detection and are long lasting. The sensors can be quickly replaced while on the field and do not require any tools.

Explosion proof S2 Sensor/Transmitter

The explosion proof sensors use a variety of detection mechanisms including catalytic for LEL and LEL- H2 specific; metal oxide semiconductor for hydrogen; galvanic cell technology for oxygen; electrochemical for hydrogen sulfide and carbon monoxide; and infrared for carbon dioxide, methane, and hydrocarbons. A hydrogen specific sensor transmitter is not available. Each of these detection methods come with their own measuring range specifications and response times varying from 20 seconds to 45 seconds. These sensors are stainless steel and are housed in a cast aluminum explosion proof J-Box (a stainless steel J-Box is also available).

Non-explosion proof S2 Sensor/Transmitter

The non-explosion proof sensors use galvanic cells for oxygen detection; electrochemical technology for hydrogen sulfide, carbon monoxide, and other toxics; and infrared technology for carbon dioxide detection. The response times vary between 20 seconds and 60 seconds depending on the targeted gas, and the measuring ranges vary as well. These sensors are plastic or aluminum and housed in an explosion proof J-Box.

Accessories

The S2 Sensor/Transmitter has numerous accessories available to meet the individual workplace's needs. Such accessories include calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and data loggers.

Each sensor comes standard with a one year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

64125 PS200 2-Gas Personal Safety Monitor - O2/CO, Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

65-2321RK S2 Series Oxygen (O2) 0 - 25% Sensor/Transmitter, (Capillary Type) Non Explosion Proof with J-Box by RKI Instruments

Having a reliable gas sensor is detrimental to the safety and security of workers in potentially unstable work environments. In many cases, the decision to use a gas detection device with a reliable sensor can be the difference between life and death. RKI Instruments understands the reliability of gas sensors should be a top priority for workplace safety managers. Their team of experts works diligently to incorporate the most advanced technologies with the highest industry standards.

For nearly 20 years, RKI Instruments has worked in the gas detection industry. Its line of products leads the industry in innovation and technology. Every year, the company commits to achieving a higher level of productivity and delivering the best gas detection products on the market. With the introduction of their high performing, low cost S2 Sensor Transmitter, RKI is fulfilling that commitment.

S2 Sensor/Transmitter

The RKI S2 Sensors and Transmitters use state of the art sensor technology to detect common gas hazards. Their efficient design and cost effectiveness make them an industry choice for atmospheric monitoring. The sensor transmitters can be used in both indoor and outdoor conditions and are designed to interface with RKI controllers or PLC/DCS systems.

The sensors are available in explosion proof casing for monitoring LEL, H2 specific, oxygen, H2S, CO2, and carbon monoxide. These sensors also have flame arrestors and are approved for use in hazardous environments. The oxygen, H2S, CO, and CO2 sensors are available in non-explosion proof models. The sensors provide highly specific and quick detection and are long lasting. The sensors can be quickly replaced while on the field and do not require any tools.

Explosion proof S2 Sensor/Transmitter

The explosion proof sensors use a variety of detection mechanisms including catalytic for LEL and LEL- H2 specific; metal oxide semiconductor for hydrogen; galvanic cell technology for oxygen; electrochemical for hydrogen sulfide and carbon monoxide; and infrared for carbon dioxide, methane, and hydrocarbons. A hydrogen specific sensor transmitter is not available. Each of these detection methods come with their own measuring range specifications and response times varying from 20 seconds to 45 seconds. These sensors are stainless steel and are housed in a cast aluminum explosion proof J-Box (a stainless steel J-Box is also available).

Non-explosion proof S2 Sensor/Transmitter

The non-explosion proof sensors use galvanic cells for oxygen detection; electrochemical technology for hydrogen sulfide, carbon monoxide, and other toxics; and infrared technology for carbon dioxide detection. The response times vary between 20 seconds and 60 seconds depending on the targeted gas, and the measuring ranges vary as well. These sensors are plastic or aluminum and housed in an explosion proof J-Box.

Accessories

The S2 Sensor/Transmitter has numerous accessories available to meet the individual workplace's needs. Such accessories include calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and data loggers.

Each sensor comes standard with a one year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

G460-01-01-02-61-40 G460 Multi-Gas Detector With NiMH Battery with Flashlights, O2, Infrared LEL Sensor, CO, H2S by GfG

For over 50 years, GfG Instrumentation has worked to develop the most reliable and effective equipment for gas detection and measurement technology. Developed by a team of highly experienced scientists and specially trained engineers, GfG products are high quality reliable instruments designed to meet the unique needs of potentially hazardous worksite. With the introduction of the G460 Multi-Gas Detector, GfG Instrumentation is continuing the trend.

G460 Multi-Gas Detector

The G460 Multi-Gas Detector is a compact and robust system with the capabilities of detecting up to six different gases and simultaneously displaying the readings. The portable detector features a user friendly and intuitive interface to simplify the day to day operations.

Ease of Use

For typical daily operations, the G460 Multi-Gas Detector operates with a single button. The complete user interface can provide access to advanced setup options with three buttons. The unit also features easy calibration operation. Simply attach the calibration adapter and apply gas. The G460 will automatically perform the appropriate adjustments. The detector will then store the dates of the three most recent calibrations for each sensor.

The G460 also features a large easy to read tricolor display which uses a color code to indicate the alarm severity. From green to orange to red, the tricolor display is intuitive and incredibly user friendly. The display feature can also flip or zoom with the touch of a button. The G460 multi-faceted alarm system also includes an ultra loud audible buzzer at 103 dB, a standard vibration mechanism, and 360 bright LED alerts (the LED alerts can also be equipped to function as flashlights). This multi-faceted system is sure to alert users and those nearby of the potential hazardous conditions. For smooth and continuous operations, the G460 Multi-Gas Detector uses interchangeable alkaline and rechargeable battery packs that provide up to 25 hours of continuous operation. Using a drop in cradle charger, the rechargeable pack can completely recharge in less than 4 hours.

G460 Multi-Gas Detector Features

The G460 Multi-Gas Detector features a motorized pump with a built-in diffusion or sample draw mode switch. The hose is easily attachable and can draw from 100 feet away. The hose is powered by its own battery pack that provides 20 hours of continuous operation. The multi-gas detector also features the widest range of sensors on the market. The compatible long lasting (and interchangeable) smart sensors include LEL, SO2, O2, H2, H2S, NO, CO, O3, HF, NH3, CIO2, CI2, PH3, ETO, HCN, and NO2. Users can purchase additional sensors to help customize the unit such as infrared sensors for the measurement of CO2 and photoionization sensors for volatile organic chemical hazards. The G460 has standard data logging capabilities that store up to 55 hours of the most recent activities. Alarm activations gas thresholds and stored permanently in the internal memory. Employers can download all internal information to generate reports and monitor results.

Simple to operate and reliable tight area gas detection adds more protection with enhanced features

5 gas protection with the Honeywell BW™

Made for confined or tight areas

Are you concerned with worker safety? Honeywell joins you in this concern, and this is the reason we designed the Honeywell BW™ Ultra. It is one of the easiest and most effective ways to maintain worker safety on the job. The Honeywell BW™ Ultra monitors and checks gases in small and confined areas. Honeywell technology gives you advanced sensors, increased comfort, connectivity, and it's easy to read. It is one of the toughest and more durable monitors available.

Why Choose the Honeywell BW™ Ultra?

• You can monitor gases remotely
• LCD screen is simple to use and easy to read
• Manage your instruments with TouchConnect™ technology
• 1-Series sensors give you enhanced reliability
• Better awareness for monitoring environments

Do you need the best possible gas monitoring for confined or tight spaces? Consider the pump driven Honeywell BW™ Ultra and here is why:

• Protect your people from five kinds of problem gases
• Keep up with the latest regulations
• Confidently enter confined areas with possible gas issues

A better way to prevent on the job gas-related incidents – the Honeywell BW™ Ultra. Here are some of its benefits:

• Monitor from remote locations
• Better gas safety in a user-friendly package. Confined or tight spaces are its specialty.
• Enhanced hole watch options
• Bigger LCD screen for easier readings
• 1-Series sensor delivers enhanced safety and dependability
• TouchConnect™ gives you faster instrument reading and management.

Internal pump runs continuously. This simplifies the process of taking in gases and analyzing them. Your instrument is very easy to operate, and it offers valuable protection from hazardous environments.

An innovative way to monitor dangerous gases in confined space. Simple and easy to read gives you outstanding protection.

If you have people working in a potentially volatile atmosphere, you need to keep constant watch on the gases in the air. The Honeywell BW™ Ultra makes monitoring very easy with its high-resolution screen. You have no delays so you can take action immediately to protect your crew.

Gas Detection on the Go

Your Honeywell BW™ Ultra is one of the toughest and most durable gas monitors on the market. You have a great deal of protection from dust ingress and moisture penetration (even in high-pressure spraying and total water submersion at 3.9 feet). It has a rating of IP66/68. Even if you accidentally abuse this unit, it can take a beating and keep on working. Works well in the dustiest and wettest of environments.

Ergonomic design is easy to use

You do not have to wear the Honeywell BW™ Ultra.

It is made for handheld operation as you check the safety of the atmosphere. This unit is one of the most comfortable detectors you can buy because it perfectly fits into the hand. The profile is nice and slim, and it does not weigh a lot. This is a good way to lessen the fatigue factor while increasing productivity.

It operates by just using a single button. This is the kind of experience Honeywell is famous for. Wearing your Honeywell BW™ Ultra is easy and perfect for working in confined areas. Because the pump is inside, your instrument stays in one position and moves when you move. No snagging or getting in the way.

5 Sensors are Better Than 4

Do you have more than one gas to monitor in an environment? Your Honeywell BW™ Ultra can sense these gases:

Oxygen
Hydrogen sulfide
Carbon monoxide
LEL – lower explosive limit levels

Maybe chlorine is a hazard where you work. Perhaps you have to watch conditions for sulfur dioxide levels. Are some of your workers around VOCs (volatile organic compounds)? You can choose a fifth selection for gas monitoring.

The Honeywell BW™ Ultra is a good choice for people working in water treatment facilities and chemical plants. Those in the marine and paper industries can also benefit because you have so many choices for gas monitoring.

Monitor possible dangerous situations in real-time for faster action when needed

Industrial businesses pay out a lot of money every year on safety issues like dangerous gases in the air. Often times, they spend more than they need to because they are not proactive with safety management.

With the help of equipment like the Honeywell BW™ Ultra, many volatile gas incidents can be avoided. It's user-friendly and simple to operate design makes it a breeze to use. In fact, you can keep someone just outside a dangerous area to monitor gases. This lets you take care of most issues before they become problems. It lowers work stress levels because your people know someone has their backs and they are safer and more productive.

Real-time remote monitoring for high risk workers

Just because the Honeywell BW™ Ultra is made for confined spaces doesn't mean you cannot use it anywhere. You only need the Honeywell Safety Communicator app to start taking important gas readings where needed, and this can be done remotely.

Do you need to monitor a high-risk area in a tight or small space? You can send vital readings via Bluetooth to your gas monitoring software from Honeywell. This info is easily accessed from control rooms or any remote location. This gives you an extra monitoring function in case of trouble or emergency issues.

Simple Design and Operation Simplifies Hole Watch

When you monitor vital gas readings where people are working you have their lives in your hands. There is no room for guesswork or using equipment which doesn't measure up to the task. Thanks to the Hole Watch function, your Honeywell BW™ Ultra can give you accurate and constant gas readings of a designated area. With Hole Watch you see all gas readings in real-time. For example, you also have a graph next to each gas so you can see immediate changes in concentrations. As soon as a hazardous gas gets close to dangerous levels, you can take the needed action to keep everyone safe from harm.

Only Honeywell lets You check gas levels as they happen

You can have the best people with the right kind of training, but if they have poorly designed gas monitoring equipment, they cannot do their jobs. They need the Honeywell BW™ Ultra.

Honeywell – setting the standard for sensor reliability

The 1-Series sensor was a product of a combined effort between Honeywell and City Technology, a worldwide producer of gas sensors for over four decades. This sensor came from the same technology that brought you the GasAlert detector with its 40XV oxygen sensor and the GasAlertMicroClip X3 with its 40xLL high quality sensor you can depend on this technology to give you the most accurate and dependable service.

Great Performance and no false alarms to worry about – even in high risk areas.

Our 1-Sensor is not large, but it is powerful.
This compact sensor delivers some of the most precise and accurate readings no matter what the ambient temperature is. For example, it performs just as well in extreme cold (-40C) as it does in very warm temperatures (60C). You get the same reliability even in the most extreme conditions.

Extended Sensor Life

Not all gas detectors can give you long service without interruption. In fact, some gas sensors wear out fast, and you have to replace them at the most inconvenient times. This costs money and valuable time on the job. When you buy the Honeywell BW™ Ultra, you can receive as much as 5 years (60 months) of service, and it comes with a full 3-year guarantee. This is the best way to maintain a lean and efficient operation without sacrificing quality.

Honeywell Technology – giving you The Honeywell BW™ Ultra for more uptime and lower costs: Bump Tests Made Simple

How often do you bump test your gas detectors? Do you need a docking station for the task? Many people do. However, with TouchConnect™ you do not need docking stations. It finds all your units in range and takes care of matters.

Do you have an entire fleet of Detectors to look after?

TouchConnect™ can do more than just Bump tests. Suppose you want to update your set points for dangerous gas level alarms. This is done automatically when you use the TouchConnect™ device.

How many detectors are in your fleet? The larger the fleet, the easier it is when you have TouchConnect™.
No docking station needed. Just send TouchConnect™ where you need it, and it handles the updating task thanks to its Bluetooth capabilities.

Are you monitoring many gases at once?

Some confined spaces have multiple risks due to a combination of dangerous gases. This is where the Honeywell BW™ Ultra is very handy. You can set it up to handle a wide range of gases like LEL, CO, H2S, and O2. But this is not all. You have the option of monitoring a fifth dangerous gas. For instance:

SO2 (Sulfur Dioxide)

NH3 (Ammonia)

CL2 (Chlorine)

VOCs (Volatile Organic Compounds)

CO2 (Carbon Dioxide)

NO2 (Nitrogen Dioxide)

HCN (Hydrogen Cyanide)

Inert Atmospheres Solutions

What is Intelligent Inert Mode from the Honeywell BW™ Ultra? Suppose you need to check for low levels of oxygen in the air. This is a dangerous condition and must be constantly monitored. The Honeywell BW™ Ultra can automatically adjust alarms for inert environments and for normal environments.

The Value of Versatility More than just confined areas

Use your Honeywell BW™ Ultra for dependable gas monitoring in the most confined areas you have. Yet, it also works well as an everyday gas detector.

Do you have people working around ammonia refrigeration systems or chlorine gas? Maybe someone uses solvents for cleaning and the danger of VOCs exists. You only need to remove the Honeywell BW™ Ultra's sampling hose, and it becomes a valuable piece of protection gear. This cuts your equipment costs.

The Honeywell BW™ Ultra protects your business and crew with its innovative technology

Do you need to protect your workers from dangerous gases? You can turn to Honeywell Industrial Safety for help. We are the leading source for industrial safety gear and equipment. You can depend on Honeywell for the latest in cost effective and high-quality personal protection gear for all kinds of uses.

We help you lower your safety gear costs, risk factors, and you can enjoy fewer downtime issues and a more productive workforce. We also offer safety administration and analytics in addition to our other safety and safety monitoring equipment.

Part Number: HU-X1W1H1M1Q1-B-N

MCXL-00HM-Y-OR GasAlertMicroClip XL Detector, Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Yellow Housing, OR Version (Other Regions, 3-pin UK plug) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXL00HMYOR