All Products

35-3000RKA-IR12 IR Carbon Dioxide, 0 - 5000 ppm, Sample Draw Assembly in NEMA 4X Enclosure with Transmitter by RKI Instruments

The 35-3000RK series is a compact sample draw detector assembly with a built-in pump that accepts a 24VDC input. This unit features a NEMA 4X enclosure making it dust, water and corrosion resistant. It also features a flowmeter with adjustable flow and a low flow alarm which warns of any obstructions or restrictions in the flow system. Combustibles, oxygen, hydrogen sulfide and carbon monoxide versions are available with or without a 4-20 mA transmitter. The 35-3000RK is also available with both LEL and oxygen sensors in one unit.

The 35-3000RK is capable of single person calibrations and remote sampling at up to 5,000 ft. from a controller, and interfacing to any RKI or third party control system (utilizing a 4-20 mA feedback signal). Multigas versions of this efficient sample draw system are available with up to four sensors, LEL, O2, H2S and CO all in one enclosure. This is a very cost effective way of monitoring for several gases that may be in the same place.

Features

• NEMA 4X enclosure
• Long life pump
• Flowmeter and LED's for operational status
• Low flow indication
• Operates on 24VDC input
• Multigas versions available with up to 4 sensor in one enclosure
• Available in LEL, O2, H2S, CO, H2, HC (ppm)
• LEL and O2 available with or without transmittter
• LEL and O2 available together in one standard compact enclosure

Industry Applications

• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Gas, telephone, & electric utilities
• Parking garages
• Manufacturing facilities
• Steel
• Automotive
• HVAC

*Please note we can only ship RKI products to customers within the United States

Easy to use and dependable
Detects gas in tight spaces
Added detection
Enhanced protection

Honeywell BW™ Ultra detects 5 gases Portability for confined space use

Safety is our prime concern at Honeywell, and the Honeywell BW™ Ultra (5 gas detector) lets you put your workers' safety first. It's specifically made for taking samples and gas monitoring in tight areas. Honeywell BW™ Ultra delivers advanced sensor technology, connectivity, comfort, and easy to see readings. This provides enhanced reliability and lets you anticipate and prevent gas related incidents in the workplace.

If you need portable gas monitoring and sampling in confined areas, the Honeywell BW™ Ultra pumped dangerous gas detector can help you:

• Comply with permit regulations and rules for confined space gas sampling.
• Protect workers and your entire operation from gas incidents.
• Make it possible to enter and work in confined spaces safely, while everyone is inside.

Benefits of Using the Honeywell BW™ Ultra:

• User-friendly and dependable method for enhanced gas safety in tight areas
• 1-Series sensor technology provides better reliability on the job
• Enhanced protection with remote monitoring capabilities
• Better situational awareness during your entire work shift
• Manage instruments quickly and easily thanks to our TouchConnect™ Technology
• New LCD screen makes it easy to check gas levels and monitor areas

The pump is internal and never stops running, so the Honeywell BW™ Ultra easily takes in air through its sampling hoses and checks it for hazardous gases. This gives you a simple and easy to use safety tool.

Monitoring the air for dangerous gases is simple and uncomplicated. Sophisticated gas detecting in small spaces and confined areas.

Gas Readings offer enhanced visibility

When you are in an area with volatile, dangerous, or explosive gases, you must constantly monitor the atmosphere. The best way to do this is with the Honeywell BW™ Ultra because the readings are clear and easy to see. High-resolution screen makes it possible to check 5 gas levels quickly and accurately.

Take it Wherever You Go

Made for enhanced durability, your Honeywell BW™ Ultra can stand some of the harshest environments. In fact, the Honeywell BW™ Ultra is rated high for moisture and dust resistance. An IP66/68 rating can withstand submersion in water as deep as 3.9 feet (1.2 meters). Your Honeywell BW™ Ultra can be dropped on the ground, into a vat of liquid, or taken into an extremely dusty area and still give you the reliable, enhanced gas protection you need for the job.

Ergonomic Design Fits Your Hand

Holding or wearing some gas detectors is awkward and uncomfortable. This is why we made the Honeywell BW™ Ultra specifically for holding comfort. It fits the hand perfectly while you take your gas readings. It is not heavy, and its slim design is easy to hold onto. This helps to prevent hand fatigue and give you better efficiency.

Works well with gloves or with bare hands

Simple 1 button operation design is so easy to use and makes gas sampling and monitoring a breeze. This is the kind of equipment you can expect from Honeywell. It is easy to wear as you go about your business. The smooth design does not snag, and internal pump runs all the time. In tight spaces, it can be your best friend.

5 Gas Sensing Capacity for Staying Safe on the Job

With your Honeywell BW™ Ultra you enjoy detection of these gases:

H2S – hydrogen sulfide
O2 – oxygen
Lower explosive limit combustible gases
CO – carbon monoxide (choose% vol, LEL or LEL%)

You can also choose a fifth gas you want to monitor or check. Do you have sulfur dioxide issues? Maybe you need to make sure deadly chlorine gas is not in the air. You can also check for volatile organic compounds, and this is important for those in the oil and gas industries, chemical and paper plants, water treatment facilities, pulp, and other industries.

Situational awareness in real-time – making monitoring gases in tight space fast and easy – helps you make quick decisions on worker safety

Safe air to breathe in confined areas is a major safety concern with many industries today. However, many problems still exist because some companies are reactive as opposed to proactive when it comes to monitoring threats.

With the Honeywell BW™ Ultra, you can prevent many accidents involving dangerous gases. While your people are inside a confined area, you can have someone just outside constantly monitoring the air for hazards. The Honeywell BW™ Ultra makes the entire process of checking for dangerous gases like H2S or CO simple and fast. This lets you correct small problems before they become major issues, giving you enhanced safety and efficiency.

Remote Monitoring (real-time) is Perfect for High-Risk Applications

The Honeywell Safety Communicator App is made to work with the Honeywell BW™ Ultra. It lets you use your gas monitoring tools in places you may not have thought possible, and more people have access too.

Bluetooth Technology gives you more options than ever. Just set up your real-time monitoring with Bluetooth, and you can monitor for possible dangerous conditions from remote locations like your control room. This provides an added layer of protection for your workers.

Hole Watch made easy thanks to Honeywell easy to understand technology

When you have people working in a confined area, your Honeywell BW™ Ultra is there to check for gas concentration changes. Just switch the Honeywell BW™ Ultra to “Hole Watch” This gives you the gas concentrations in real-time to help you maintain maximum safety, hole watch mode gives you a graph reading (ppm) of gas concentrates to help you know when any of them are close to a critical state.

Available only with Honeywell equipment, Hole Watch mode lets you check gases as they rise and fall. This gives you the chance to get all your workers to safety when needed, avoiding accidents, injuries, and downtime.

Honeywell gives you real-time gas change monitoring.

Are you sure your gas detector can do the job? Unless your detector is specifically designed for confined spaces, like the Honeywell BW™ Ultra, you may be taking some unnecessary chances with your workers’ safety.

The Finest sensor reliability and quality in the industry

Working with City Technology, we designed the 1-Series sensor. City Technology has been a worldwide producer or fine gas sensors for over forty years. The 1-Series is an upgrade from the very successful 40 XV O2 sensor in the GasAlert detector and the long-life O2 sensor, 40xLL specially made for our GasAlertMicroClip X3. You can depend on the 1-Series because our sensors have a rich history of gas detection dependability.

Do you need dependability with no nuisance trippig – in the harshest of environments?

Do not let its size fool you. The 1-Series sensor gives you some of the most accurate gas readings even in temperatures as cold as -40 F and as warm as 140 F. Now add other factors like pressure humidity, wind, and precipitation.It does not matter how extreme the conditions, your Honeywell BW™ Ultra is up to the task for dangerous gas detection.

No senor changes for five years

If you invest in some gas detecting equipment you may need to change sensors often. In fact, some may not last you a year and you end up spending a lot of money.

Plus you have to take the units out of service to replace sensors. The Honeywell BW™ Ultra can give you 60 months of continuous sensor service (depending on usage)

In addition, we provide a 36 month warranty on our Honeywell BW™ Ultra models for cost-effective gas detection with few maintenance issues.

Would you like to increase your operating efficiency while reducing your downtime and equipment costs? Consider the Honeywell BW™ Ultra.

Do you spend too much time with bump tests? Our Honeywell BW™ Ultra is designed to facilitate this task.

Bumping is easy, and you do not even need docking stations.

Your TouchConnect™ device can locate your detectors for you and put them into bump mode.

Simple configuration for one unit or an entire fleet

Setting gas concentration alarms is sometimes time-consuming but when you have the Honeywell BW™ Ultra and TouchConnect™ Technology, alarm setting is simplified.

You only need to turn to your TouchConnect™ device to automatically setup your configuration settings.

This is very convenient for companies with many gas detectors (in branches all over the planet) to track and maintain) and you don’t need docking stations or special software programs.

Just contact each branch with your TouchConnect™. Your Bluetooth feature does the work for you.

Detecting Five Hazardous Gases

Do you face multiple gas hazards in your line of work? The Honeywell BW™ Ultra can detect more than just CO and O2. It can also tell if there are unsafe levels of LEL and H2S. In addition, you can also select a fifth setting for your specific applications. Here are some examples:

• SO2 – for those in the oil, gas, paper and pulp industries
• CL2 – wastewater treatment, water treatment, pools, and paper industries
• NH3 – pool systems, chemical, agricultural, refrigeration, and paper industries.
• CO2 – beer and wine industries
• HCN – food and perishables
• NO2 – construction
• VOCs – companies using paints or solvents

Solving Inert Environment Problems

When you use your inert mode on the Honeywell BW™ Ultra, you can check your environment for low O2 levels. Your gas detector automatically adjusts the settings for O2 level alarms, and it can adjust for normal atmospheres or inert atmospheres.

Do you need more than just gas detection for confined spaces?

Your Honeywell BW™ Ultra is specifically made to perform well in the most tightest and confined spaces. However, you can also use it for monitoring and sampling other parts of your work area. For example, are there possible chlorine hazards or do some of your workers have to be around volatile organic compounds for cleanup tasks? You can use your Honeywell BW™ Ultra for these jobs. Simply take out the sample hose, and you have a full-time gas monitor, saving you a lot on operating expenses.

Your Honeywell BW™ Ultra protects you, your crew, and your entire operation

Do you need help with protecting your workers from hazardous or dangerous environments? Honeywell Industrial Safety does much more than just make gas detectors. Our equipment maintains safety, reduces unnecessary downtime issues, and lowers costs, giving you greater efficiency and productivity.

Honeywell is the leading industrial safety equipment suppliers in the world. Our protective gear is all-encompassing, and we offer a complete portfolio for protecting every part of the body. In addition to personal gas detectors, we also provide real-time monitoring, safety administrating, and analytics.

Part Number: HU-X1W1H1M1S1-Y-N

500-2 Handheld Combustion Efficiency Emissions Analyzer includes NO (Nitric Oxide) Sensor, Temperature (Stack/Exhaust) by Enerac

Enerac invented the first electronic portable multi-parameter combustion analyzer in 1979 (in the USA). Enerac still services this analyzer as well as all others Enerac has manufactured. The Enerac Model 500 is a low-cost, easy to use (no technical expertise needed) portable combustion efficiency emissions analyzer. The Enerac 500 is perfect for determining the efficiency of a combustion source as well as for collecting advanced emissions data for internal use, or for local, state and federal emissions reporting requirements.

The Enerac 500 is perfect for testing various combustion sources, such as boilers, burners, engines, turbines, generators, kilns, dryers, heaters and ovens (just to name a few). Equally, with a simple combustion efficiency test, or a more advanced combustion emissions test, the Enerac 500 is designed to provide years of trouble-free service. It is flexible enough to be tailored to meet your specific needs, yet simple enough to be completely maintained in the field. Advanced design, rugged construction and an impressive array of options are its hallmark. Constructed as a field work-horse the Enerac 500 can be upgraded (adding sensors and options to the same unit) to meet your changing needs at any time.

Introduction

The Enerac 500 provides a comprehensive range of automatic emissions calculations, advanced Enercom Windows Software, two-way communications and factory support. From low NOx burners, (0.1ppm NOxresolution) to large rich burn engines (5,000ppm (NOx)/20,000ppm CO) the Enerac 500 is designed to help meet your needs of various monitoring applications at an affordable price.

The Enerac 500 handheld combustion efficiency emissions analyzer, is our newest, low cost, Emissions-Monitoring System, utilizing standard electrochemical sensors. It is designed to help you meet the challenges of a rapidly changing regulatory environment. It is easy to use, comprehensive (O2-CO-NO-NO2-(NOx), SO2, Combustibles, Stack Temperature, Draft), and flexible.

• A micro-sized Combustion-Efficiency analyzer and Emissions-Monitoring System
• Thermoelectric Condenser / Peltier Cooler (sample conditioning system for proper detection and measurement of NO2 and/or SO2 gasses
• Powered by 4xAA Rechargeable batteries
• Built-in Thermal Printer: 2" Character-type
• Our Enercom Windows Software included
• USB and Serial Ports included. Bluetooth Wireless (optional)

Rugged

The Enerac 500 is designed for years of trouble-free service. Housed in a rugged, lightweight aluminum case, its modular design allows end-users the ability to replace a battery or sensor, in a matter of seconds. Reducing both downtime and costs.

• Rugged lightweight aluminum case
• Work-horse of the industry
• Won't warp or crack like plastic models
• Small, lightweight and tough
• 2 Year Warranty
• 24 Hour Service
• Best service and support in the industry

Comprehensive

The Enerac 500 provides an extensive range of data management, and support options. It not only (automatically) performs complicated emission calculations, it can even allow the user the ability to identify specific data sets with a specific customer, dramatically reducing retrieval and processing costs.

Enerac 500 is compatible with Enerac's advanced Enercom for Windows ™ software. All parameters can be continuously displayed; Minimum, Maximum, Averages and Standard Deviations calculated; Multiple plots and graphs can be viewed or printed. With the Enercom software, data management and report writing is now a snap. With the Enerac 500, help is never more than a phone call or email away.

Affordable

With all these capabilities the Enerac 500 is surprisingly affordable.

• Buy only what you need and add options later
• Always upgradeable (anytime)!
• Free software and accessories
• Receive a generous trade-in allowance on your old analyzer
• Loaners available at no charge.

Compliance Level

The Enerac 500 can be configured to a compliance-level analyzer with addition of several key features. The Enerac 500 has the ability to produce Total NOx data for one. With both the NO and NO2 sensors Total NOxis obtained (NOx)=NO+NO2 on stationary combustion sources). The ability to also configure the 500 with High Sensativity sensors allows extreme accuracy over the sensors shorter range etc. Additionally, the 500 has the option to have the Thermoelectric Condenser (also called Peltier Cooler) option installed. This is a sample conditioning system (usually found on our competitors larger more expensive units) essential for proper NO2 and or SO2 gas detection and measurement. With the final addition of the viton hose, sample quality is maintained and compliance level data obtained. Therefore, the Enerac 500 is perfect for meeting your local, state and federal regulatory emissions compliance requirements.

• Free data collection software
• Time-stamped internal data storage
• Total NOx (NO and NO2)
• High Sensitivity / Low Range Sensors Available
• Viton and Teflon hose options
• Sample Conditioning System (for proper NO2 and/or SO2 gas detection and measurement)
• Field replaceable sensors
• Easy field calibrations (if desired)
• Comply with local, state and federal emissions requirements

In a world of downsizing, and increasing workloads, the Enerac 500 can help you simplify your job. With a broad array of available options, the Enerac 500 will provide you with the capabilities you need, when you need them, all within your budget.

725-103-03-P1 Eagle 2 Portable Monitor for LEL & PPM/O2/CO/CO2 5% Volume (IR)/VOC's (0 - 50 ppm, PID) by RKI Instruments

Continuing in its legacy of durable and reliable gas detection and monitoring systems, RKI Instruments is proud to offer a new product in its popular Eagle portable gas detector series. The Eagle 2 can monitor up to 6 different gases and is equipped with several exclusive features that can only be found with the Eagle series. In addition, its large glove friendly push buttons and LCD screen ensure an ease of use when onsite. Rated intrinsically safe, the Eagle 2 is equipped with state of the art technologies that are not available with other competitive gas detectors and monitors.

Specialty Sensors

The Eagle 2 has a variety of available specialty sensors. Workers can use a photoionization detector for low or high range VOC detection and Fence Electrode Technology for humidity and contamination resistance. An infrared sensor is available for Co2, % LEL CH4, % Volume CH4, % LEL HC, and % Volume HC. Thermal conductivity sensors are available for % Volume H2 and % Volume CH4. The unit is also compatible with the smart plug and play toxic sensors for the detection of NH3, AsH3, CI2, HCN, PH3, and SO2. With the wide variety of sensors and gas detection available, the Eagle 2 can be customized to meet almost all worksite gas detection needs.

Exclusive Features

The monitor has a long internal pump that can draw samples for up to 125 feet. The pump features a low flow auto shut off and alarm. This allows operators to respond swiftly from a safe distance. The unit is multilingual with 5 different language preferences, and features an alkaline battery life of 18 hours or a NiMH life of 20 hours. To protect the integrity of the device and the configurations, the unit can be password protected. The Eagle 2 also has standard data logging capabilities for easy research, evaluation, and site monitoring. To reduce calibration costs and time, the unit features an automatic calibration option and a single gas calibration option.

The Eagle 2 is heavily protected from environmental conditions by a weather proof, chemical resistant RFI/EMI coated high impact polycarbonate/PBT blend enclosure. The enclosure also renders the unit water and dust resistant. Because of the enclosure, the Eagle 2 can function in 2 inches of water without leakage.

Eagle 2 Specifications

The portable and durable unit is lightweight at less than 4 pounds. Its dimensions are suitable for convenient carrying (9.5?L x 5.25?W x 5.875?H), and it features a conveniently placed durable top handle. The large easy to read display has a polyurethane overlay backlights on demand and when the alarm is activated. The 2 alarm channels are fully adjustable for the user and can be password protected. With a 95 dB buzzer and 4 high intensity LEDs, the alarm is sure not to be missed. The Eagle 2 is standard with a 2 year warranty for material and workmanship and a 1 year warranty for PID sensor.

*Please note we can only ship RKI products to customers within the United States

2811-720-001 EC 28 Gas Transmitter with Sensor, Hydrogen Sulfide (H2S), No Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

G460-01-01-02-61-14 G460 Multi-Gas Detector with Hand Aspirated Pump and Alkaline Battery, O2, IR LEL, CO, H2S by GfG

For over 50 years, GfG Instrumentation has worked to develop the most reliable and effective equipment for gas detection and measurement technology. Developed by a team of highly experienced scientists and specially trained engineers, GfG products are high quality reliable instruments designed to meet the unique needs of potentially hazardous worksite. With the introduction of the G460 Multi-Gas Detector, GfG Instrumentation is continuing the trend.

G460 Multi-Gas Detector

The G460 Multi-Gas Detector is a compact and robust system with the capabilities of detecting up to six different gases and simultaneously displaying the readings. The portable detector features a user friendly and intuitive interface to simplify the day to day operations.

Ease of Use

For typical daily operations, the G460 Multi-Gas Detector operates with a single button. The complete user interface can provide access to advanced setup options with three buttons. The unit also features easy calibration operation. Simply attach the calibration adapter and apply gas. The G460 will automatically perform the appropriate adjustments. The detector will then store the dates of the three most recent calibrations for each sensor.

The G460 also features a large easy to read tricolor display which uses a color code to indicate the alarm severity. From green to orange to red, the tricolor display is intuitive and incredibly user friendly. The display feature can also flip or zoom with the touch of a button. The G460 multi-faceted alarm system also includes an ultra loud audible buzzer at 103 dB, a standard vibration mechanism, and 360 bright LED alerts (the LED alerts can also be equipped to function as flashlights). This multi-faceted system is sure to alert users and those nearby of the potential hazardous conditions. For smooth and continuous operations, the G460 Multi-Gas Detector uses interchangeable alkaline and rechargeable battery packs that provide up to 25 hours of continuous operation. Using a drop in cradle charger, the rechargeable pack can completely recharge in less than 4 hours.

G460 Multi-Gas Detector Features

The G460 Multi-Gas Detector features a motorized pump with a built-in diffusion or sample draw mode switch. The hose is easily attachable and can draw from 100 feet away. The hose is powered by its own battery pack that provides 20 hours of continuous operation. The multi-gas detector also features the widest range of sensors on the market. The compatible long lasting (and interchangeable) smart sensors include LEL, SO2, O2, H2, H2S, NO, CO, O3, HF, NH3, CIO2, CI2, PH3, ETO, HCN, and NO2. Users can purchase additional sensors to help customize the unit such as infrared sensors for the measurement of CO2 and photoionization sensors for volatile organic chemical hazards. The G460 has standard data logging capabilities that store up to 55 hours of the most recent activities. Alarm activations gas thresholds and stored permanently in the internal memory. Employers can download all internal information to generate reports and monitor results.

BWS1-S-Y BW Solo Single-Gas Detector, (SO2) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-S-Y

65-2423RK-05 Sensor, Hydrogen Sulfide (H2S), Direct Connection (No Transmitter, No J-Box), CSA Version by RKI Instruments

When working on potentially hazardous jobsites, safety managers should look for workplace safety solutions that are dependable and steadfast. When lives are on the line, a workplace cannot afford subpar safety products. That is why, at RKI Instruments, workplace safety is a top priority. Their Research and Development team work daily to integrate the latest technology with the best industry practices. With a reputation for excellent products, RKI Instruments introduces the latest in direct connect sensor technology. Designed for use in Class 1, Division 2 hazardous environments, the Direct Connect Sensors are designed specifically for RKI Beacon 110, 200, and 410 controllers.

Direct Connect Sensors

The RKI Direct Connect Sensors series gas sensors are state of the art gas detection sensors available for LEL, H2 Specific LEL, LEL IR, Oxygen, H2S, CO, CO2, and a variety of toxic gases. To use the Direct Connect Sensors, they can be used for remote detection by mounting them onto explosion proof junction boxes, or they can mount directly onto controllers and be used as a completely standalone system. Their unique plugin design allows for a quick and easy tool free installation on jobsites.

Detection solutions for a variety of hazardous environments

The Direct Connect Sensors are designed to be use in both indoor and outdoor settings. Additionally, some of the sensors are available in explosion proof models. The explosion proof models utilize a patented coating which serves double duty as also being water repellant. Users can also purchase splash guards to protect the sensors from very wet conditions.

Sensor Technology

Each sensor is crafted with stainless steel and housed in cast aluminum (stainless steel housing is available for some sensors). The Direct Connect Sensors are available in 2 forms: explosion proof and non-explosion proof. The explosion proof sensors are available as catalytic sensors for LEL, and LEL H2 specific. For hydrogen sulfide and carbon monoxide, the sensors utilize electrochemical technology which provides incredibly specific accuracy and quick response. Oxygen sensors work with galvanic technology, and infrared sensors for methane, hydrocarbons, and carbon dioxide. Non-explosion proof uses a galvanic sensor for oxygen; electrochemical sensors for hydrogen sulfide, carbon monoxide and other toxic gases; and infrared for carbon dioxide. Both explosion proof and non-explosion proof have 1 year warranties for materials and craftsmanship.

Specifications

The response times are under 30 seconds for all gases except hydrogen sulfide and carbon monoxide in the non-explosion versions (with a response time of 35 seconds) and non-explosion proof model sensor for toxic gases which has a 60 second response time. The life expectancy of all sensors are between 2 and 5 years.

The Direct Connect Sensors are compatible with several RKI Industries' accessories including calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors, and dataloggers.

*Please note we can only ship RKI products to customers within the United States

Compatible sampling tube for Gas-Pro. Select length from list and whether standard or low adsorption material for reactive gases. All include tube insert to enable attachment to flow plate.

MBB3-A1C1R3E-420 MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / CO + H2S / SO2 / O2 / Li-ion / Wireless by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs

BWC3R-H BW Clip RT 3 Year Single Gas Detector, Hydrogen Sulfide (H2S), (Low 10 ppm / High 15 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3R-H

XT-X0H0-B-AU GasAlertMax XT II 2 Gas Detector, Oxygen (O2), Hydrogen Sulfide (H2S) - Black Housing, AU Version (Australia) by BW Technologies

GasAlertMax XT II is the safest and most economical choice for multi-gas detection systems. Utilizing the most advanced technology on the market, the GasAlertMax accurately and reliably monitors up to four hazardous conditions, and offers a simple user friendly device for easy operation. Its standard safety features and compatibility with other instruments ensure that the gas detector is the best instrument for gas monitoring compliance.

GasAlertMax XT II specifications

The lightweight and portable unit is approximately 11.5 ounces, and features the latest technology allowing for a compact design. With an operational temperature range of -4 to 122 degrees Fahrenheit, the monitor is designed to function effectively in many harsh conditions. The cautionary yellow outer shell helps to ensure that the gas detector is carried with the user not left onsite. Additionally, the durable casing is resistant to water and features a built-in concussion proof boot.

Triple alarm system

The GasAlertMax XT II features a triple alarm system designed to alert users of potentially hazardous conditions. When the gas sensors detect specified levels of H2S, CO, O2, or combustible gases, the instrument will begin the triple alarm alert and notify users and those nearby. The device indicates these dangers with a vibrating alarm, an ultra bright visual alarm, and an audible alarm of over 95 decibels. The alarms are also designed to alert users of administrative needs such as battery replacement.

GasAlertMax XT II features

The GasAlertMax XT II has multi-language support features in English, French, Spanish, German, and Portuguese. The gas detector also has state of the art block detection with semi-conductor pressure sensor, and standard data and event logging. Accessories such as the belt holster, multi-unit cradle charger, and concussion proof boot are also available.

Upon activation, the unit will automatically test sensors, pumps, battery, and circuitry. For additional test and calibration, the GasAlertMax XT II is compatible with the MicroDock II automated test and calibration system and Fleet Manager II. Improving on its functionality, the unit is customizable. Users can change options for forced calibration and tests, safety locks, alarm setpoints, safe display mode, language choices, start-up message, and more.

The easy to read LCD screen displays continuous information about real-time gas concentrations and alarms. To maintain simplicity and ease of use, the GasAlertMax XT II also features a user and glove friendly one touch button for operation. The no-frills design has an added benefit of minimizing cost and user training. This simple, portable, and compact detector is the best instrument for confined spaces or potentially dangerous worksites.

Highest standards of reliability

The typical batter life ranges between 8 and 13 hours depending on the temperature. The durable and long lasting batteries can fully recharge in approximately 6 hours. The GasAlertMax XT II and its sensors feature a standard two year warranty. With safety and reliability as a top priority, BW Technologies has developed the multigas detector to utilize the most advanced technology on the market, while maintaining its simplicity and portability. When working in settings with possible gas exposure, users can be certain that the gas levels are being accurately and reliably monitored with the best technology available.

Part Number: XTX0H0BAU

G460-01-01-02-61-20 G460 Multi-Gas Detector With NiMH Battery, O2, Infrared LEL Sensor / % Vol., CO and H2S Sensor, CO2 by GfG

For over 50 years, GfG Instrumentation has worked to develop the most reliable and effective equipment for gas detection and measurement technology. Developed by a team of highly experienced scientists and specially trained engineers, GfG products are high quality reliable instruments designed to meet the unique needs of potentially hazardous worksite. With the introduction of the G460 Multi-Gas Detector, GfG Instrumentation is continuing the trend.

G460 Multi-Gas Detector

The G460 Multi-Gas Detector is a compact and robust system with the capabilities of detecting up to six different gases and simultaneously displaying the readings. The portable detector features a user friendly and intuitive interface to simplify the day to day operations.

Ease of Use

For typical daily operations, the G460 Multi-Gas Detector operates with a single button. The complete user interface can provide access to advanced setup options with three buttons. The unit also features easy calibration operation. Simply attach the calibration adapter and apply gas. The G460 will automatically perform the appropriate adjustments. The detector will then store the dates of the three most recent calibrations for each sensor.

The G460 also features a large easy to read tricolor display which uses a color code to indicate the alarm severity. From green to orange to red, the tricolor display is intuitive and incredibly user friendly. The display feature can also flip or zoom with the touch of a button. The G460 multi-faceted alarm system also includes an ultra loud audible buzzer at 103 dB, a standard vibration mechanism, and 360 bright LED alerts (the LED alerts can also be equipped to function as flashlights). This multi-faceted system is sure to alert users and those nearby of the potential hazardous conditions. For smooth and continuous operations, the G460 Multi-Gas Detector uses interchangeable alkaline and rechargeable battery packs that provide up to 25 hours of continuous operation. Using a drop in cradle charger, the rechargeable pack can completely recharge in less than 4 hours.

G460 Multi-Gas Detector Features

The G460 Multi-Gas Detector features a motorized pump with a built-in diffusion or sample draw mode switch. The hose is easily attachable and can draw from 100 feet away. The hose is powered by its own battery pack that provides 20 hours of continuous operation. The multi-gas detector also features the widest range of sensors on the market. The compatible long lasting (and interchangeable) smart sensors include LEL, SO2, O2, H2, H2S, NO, CO, O3, HF, NH3, CIO2, CI2, PH3, ETO, HCN, and NO2. Users can purchase additional sensors to help customize the unit such as infrared sensors for the measurement of CO2 and photoionization sensors for volatile organic chemical hazards. The G460 has standard data logging capabilities that store up to 55 hours of the most recent activities. Alarm activations gas thresholds and stored permanently in the internal memory. Employers can download all internal information to generate reports and monitor results.

Part Number: 17L-150N-100