Chlorine Test Kit

K-2513 Chlorine Test Kit (Chemetrics): Chlorine, Free & Total by AquaPhoenix

This color disk test uses powder DPD reagent that reacts with chlorine quicker than the tablet form of DPD, this gives more accurate results. Easy to use in both lab and field work.

2842800 Chlorine Dioxide Test Kit: Hach Color Disc by AquaPhoenix

Monitor ClO2 levels on-site with the Chlorine Dioxide Test Kit. The Chlorine Dioxide Test Kit uses the reliable DPD method to monitor ClO2 concentration, while eliminating chlorine interference through the addition of glycine. With 100 tests per kit and available range of 0-2 mg/L and resolution of 0.1 mg/L, operators can accurately monitor around the 0.8 mg/L regulated limit.

Simple, cost-effective method for maintaining optimum chlorine dioxide levels in your plant
USEPA-accepted for waste water and potable water
Approved by some states for potable water under specific conditions (check with your regulatory agency)

Includes two reagents, tube, color comparator box, color discs, instruction sheets, and carrying case.

4497-DR-01 Chlorine Test Kit: LaMotte Total Chlorine Direct Reading Titrator, 1 drop = 0-200 ppm / 4 ppm Cl by AquaPhoenix

This test kit measures for high Chlorine levels using the direct reading titrator method. Range/sensitivity is 0-200 ppm/4 ppm Cl

K-5808 Chlorine (Hypocholorite) CHEMets® Test Kit (0-1.55%) by AquaPhoenix

TK5025-Z Chlorinated Alkaline Test Kit: 1 drop = 40 ppm as NaOH / 10mL by AquaPhoenix

Refill Reagents: SA7575-B, PH1605-A, ST2970-B

TK5000-Z Chlorinated Alkaline Test Kit: 1 drop = 160 ppm as NaOH / 10mL by AquaPhoenix

Refill Reagents: SA1625-B, PH1605-A, ST2970-B

R-2500 Chlorine Test Kit: Refill for K-2504, 30 Ampoules by AquaPhoenix

Chlorine — CHEMets® Refill
Catalog No.: R-2500
Method: DPD
30 ampoules

TK5050-Z Chlorinated Alkaline Test Kit: 1 drop = 80 ppm as NaOH / 10mL by AquaPhoenix

Refill Reagents: SA7590-B, PH1605-A, ST2970-B

223101 Chlorine Test Kit (Hach): Free & Total Chlorine Color Disc Test Kit by AquaPhoenix

0 - 0.68 mg/L Cl2
0 - 3.4 mg/L Cl2 Cl2
0 - 3.4 mg/L Cl2
1 - 10 mg/L Cl2

This color disc test kit uses powder DPD reagent that reacts with chlorine more quickly than tablet-form DPD, giving more accurate results. Powder DPD also has a considerable advantage over orthotolidine, a hazardous substance sometimes used as a free and total chlorine test reagent. Hach Chlorine Test Kits are manufactured by Hach to ensure compliance with stringent quality control standards. Kit contains 100 tests (50 free, 50 total).

Quickly and accurately measures free and total chlorine levels in the field or in the lab
Simple and fast color disc method

Includes two reagents, color disc, color comparator box, tube, instruction sheet, and carrying case.

1454200 Chlorine Test Kit: Hach Color Disc by AquaPhoenix

Simple, low-cost color disc method is the most accurate visual test kit method.

*This product has not been evaluated to test for chlorine and chloramines in medical applications in the United States.

Simple, low-cost color disc method is the most accurate visual test kit method
Achieve fast results with an easy-to-carry test kit

K-2505 Chlorine Test Kit: CHEMetrics DDPD Free & Total Chlorine, 0-1 & 1-5 ppm by AquaPhoenix

Most popular disinfectant for water. Easy to use and accurate results.

4497-01 Chlorine Test Kit: LaMotte Total Chlorine Dropper Pipet, 1 drop = 10 ppm Cl by AquaPhoenix

This test kit measures for high Chlorine levels using the dropper pipet method. Range/sensitivity is 1 drop = 10 ppm Cl.

TK4030-Z Chlorine OTO Residual Test Kit by AquaPhoenix

• Refill Reagents: OT1510-B

K-2520A Chlorine HR CHEMets® Test Kit (0-125 ppm) by AquaPhoenix

The K-2520A Chlorine HR CHEMets® Test Kit (0-125 ppm) comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): CHEMets® Refill, Comparator, Activator Solution, 25 mL sample cup, 3.0 mL Syringe, and instructions.

K-2520D Chlorine HR CHEMets® Test Kit (0-25 ppm) by AquaPhoenix

The K-2520D Chlorine HR CHEMets® Test Kit (0-25 ppm) comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): R-2500 CHEMets® Refill, C-2506 Comparator, A-2500 Activator Solution, 25 mL sample cup, A-0104 10mL syringe, and instructions.

K-2520B Chlorine HR CHEMets® Test Kit (0-500 ppm) by AquaPhoenix

The K-2520B Chlorine HR CHEMets® Test Kit (0-500 ppm) comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): R-2500 CHEMets® Refill, C-2506 Comparator, A-2500 Activator Solution, 25 mL sample cup, A-0194 MiniPet®, A-0171 Pipettor Tips Pack, and instructions.

K-2520C Chlorine HR CHEMets® Test Kit (0-2000 ppm) by AquaPhoenix

The K-2520B Chlorine HR CHEMets® Test Kit (0-500 ppm) comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): R-2500 CHEMets® Refill, C-2506 Comparator, A-2500 Activator Solution, 25 mL sample cup, A-0194 MiniPet®, A-0171 Pipettor Tips Pack, and instructions.

K-5816 Chlorine (Hypocholorite) CHEMets® Test Kit (0-12.5%) by AquaPhoenix

TK2735-Z Chlorine FAS-DPD Test Kit, Free, 1 drop = 0.2 or 0.5 ppm by AquaPhoenix

EndPoint ID test kits are packaged in a durable plastic case and include all reagents, equipment and instruction card to complete approximately 60-75 tests. Color coded reagent caps match the color bar on the instruction card for easy identification when running multiple tests and our photographic, step-by-step instructions keep testing simple and help users easily identify color changes.

TK4500-Z Chlorine Dioxide Test Kit, 1 drop = 0.5 ppm ClO2 by AquaPhoenix

EndPoint ID Drop Count Test Kit, Chlorine Dioxide

1 drop = 0.5 ppm as ClO2 / 10 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, test vial and required accessories all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

7514-01 Chlorine Test Kit: LaMotte Free & Total Chlorine, 1 drop = 0.2 or 0.5 ppm Cl by AquaPhoenix

The DPD-FAS titration test kit measures Free and Total Chlorine in 0.2 ppm and 0.5 ppm increments. The distinct color change allows for accurate readings even at very low or high chlorine levels. The DipCell Color Comparator displays pH levels from 6.8 to 8.2 for 50 tests. The pH test is measured using liquid reagents.

K-2504 Chlorine Test Kit: CHEMetrics DPD Free & Total Chlorine, 0-1 & 1-5 ppm by AquaPhoenix

Our Free and Total Chlorine Testing Kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Low and High Range Comparators, Activator Solution, 25 mL sample cup, and instructions.

Range: 0-1 & 0-5 ppm. MDL: 0.05 ppm. Method: DPD (free & total). 30 tests.