$200 - $300

BW Clip 2 Year Single Gas Detector by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

BWC2-X BW Clip 2 Year Single Gas Detector, Oxygen (O2), Low - 19.5% vol. / High - 23.5% vol. by BW Technologies

If you must monitor the oxygen in a work environment, you need the most accurate monitors you can buy. However, it's also necessary to have something that is light, portable, and simple to use. This makes it much easier on your workforce. The BW Clip BWC2-X is designed with these features in mind, and it is an affordable solution for portable O2 monitoring, that meets OHSA specifications.

The BWC2-X operates with the touch of a button and is so easy to use. Some monitors require battery charging and sensor changing periodically, but not the BWC2-X. Everything is built in and the monitor lasts for 2 full years of operation. Plus you also have six months of storage that extends its life, if needed. Once you activate and turn on the unit, it works constantly checking the air for oxygen levels. If they get below 19.5 percent, you receive an alarm, and over 23.5 percent sounds an alarm (default settings).

Compatible with MicroDock II and Fleet Manager II

• No computer necessary
• Testing for 5 monitors
• Simple fleet management
• Parameters and alarms can be adjusted
• Fast bump tests

Reflex Technology™ and Surecell™

• Surecell™ - Monitors oxygen levels in a wide range of temperatures. Functions in temperatures up to 122 Fahrenheit and cold environments with temperatures -4F (-20C).
• Reflex Technology™ - auto testing provides increased worker confidence and safety. Every day the monitor performs on board diagnostics.

Features:

• 2 year warranty
• Small, light, and compact
• Affordable
• One button operation that is tamper proof
• Loud 95 decibel alarm vibrates and flashes red can be seen 360 degrees.
• Tracks as many as 35 tests and readings

Options

Part Number: BWC2X

BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 25 ppm / High - 75 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-M2575

BWC2-H BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 10 ppm / High - 15 ppm by BW Technologies

Are you looking for a cost effective and reliable H2S detector to keep workers safe and compliant? The BW Clip BWC2-H is one of the easiest to operate and most dependable portable gas detectors on the market today. In fact, it is designed to deliver maintenance free operation for an entire two years. It is simple to use and there is no need to calibrate. It never needs new batteries or battery charging, and the sensor never needs replacing. It provides a low level alarm at 10 ppm and high level at 15 ppm.

MicroDock II and Fleet Manager II compatible and the BW Clip BWC2-H will fit right in with your IntelliDoX instrument management system, and you'll enjoy a host of benefits from BW clip units with IntelliDoX technology, such as:

• Testing for 5 units at one time
• Extremely fast bump tests (fastest in the industry)
• Parameter and alarm set point adjustment
• Email notices and easy recordkeeping

BW Clip includes:

• Self test function thanks to Reflex Technology™ your gas sensor will test itself every day to ensure safety, instill worker confidence, and limit downtime.
• Dual reservoir design with Surecell™ technology, you have much faster response time and performance than standard electromechanical sensors. In addition, you'll receive excellent performance in the harshest of work environments.

Standard features includes:

• Lightweight and compact
• Maintenance free (one push button) operation
• 3 function alarm flashes, vibrates and loud 95 decibel sound
• Self testing battery, electronics, and sensor
• Low operating costs
• Rated for extreme temperatures and environments
• Logs last 35 H2S events and bump tests

Configuration Options:

• Flashing red noncompliance indicator - enable bump test due or gas event
• Set both low and high alarm set points prior to activation
• Gas reading can be given with alarm
• Bump test reminder can be set by user
• Display can include the current time of day

Part Number: BWC2H

BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 10 ppm / High - 15 ppm, Black Housing by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-H-B

BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 25 ppm / High - 100 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-M25100

BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 25 ppm / High - 50 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-M2550

BW Clip 2 Year Single Gas Detector, Oxygen (O2), Low - 19.5 ppm / High - 23.5 ppm, Black Housing by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-X-B

BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 35 ppm / High - 200 ppm, Black Housing by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-M-B

BWC2-H510 BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 5 ppm / High - 10 ppm by BW Technologies

If you need hydrogen sulphide gas detection in your line of work, you want the most dependable H2S testing unit you can find, and the 2 year BW Clip BWCH510 is one of the best in the industry. Once you turn it on, there is no need to shut it off. It is designed to run constantly for 2 to 3 years and is virtually maintenance free. You won't have to calibrate, change batteries, charge batteries, or replace the sensor.

Not using the BW Clip? It can easily be stored in its hibernation case, and this will extend its life. For example, a 30 day storage will extend the life by 30 days.

Your BW Clip gas detector is fully compatible with Fleet Manager II software and MicroDock instrument management systems. Plus, if you utilize an IntelliDoX management system you can receive these added benefits:

• Test five units at once
• No computer needed
• Simple fleet management and recordkeeping
• Alarm and parameters adjustment
• Quickest bump test on the market today

Additional technologies that ensure compliance, safety, and maximum productivity:

• Self testing capabilities with Reflex Technology™ each day (24 hours), the BW clip will perform internal testing to insure it is in peak operating conditions. This will keep downtime to a minimum and help maintain a safe work environment.
• Surecell™ dual reservoir technology enjoy extremely quick response times. Much faster and efficient than standard electromechanical sensors. And the BW clip is made to function in the toughest of environments.

Standard features:

• Light, compact, and easy to use
• Inexpensive operating costs
• Maintenance free (one push button) operation
• 95 decibel alarm that also vibrates and flashes, for maximum safety
• Ability to log 35 gas events and bump tests
• Electronics, sensor, and battery, are all self-testing
• Rated for harsh working conditions non condensing means it will function well in areas of extreme humidity and in temperatures as high as 122F or low as -40F.
• Warranty 2 years and up to an additional year of shelf life
• Low level alarm is 5 ppm and high level is 10 ppm

Alarm Configurations:

• Alarm plus gas level reading
• Current time
• Tells you when a bump test is due user can set or can be set by management software

Part Number: BWC2H510

BWC2-M BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 35 ppm / High - 200 ppm by BW Technologies

Carbon Monoxide (CO) is one of the most dangerous gases you can encounter, because it is colorless and odorless. You cannot afford to take chances with your well-being and that is why the BWC2-M is a popular choice for portable CO detection today. The BWC2-M is built to give you a full 24 months of dependable and reliable service, and it is one of the easiest gas monitors to use and maintain. It never needs batteries or a new sensor. Low alarm level is 35 ppm and at 200ppm you receive a high alarm (default settings).

Your two year gas monitor can last for as long as three years. For example, if it is in storage for three months, its life is extended by three more months.

Do you use a MicroDock system or Fleet Manager II software? Your BWC2-M will be a welcome addition. Plus, when used with IntelliDoX systems, you receive these benefits:

• Adjustable parameters and alarms
• Rapid bump tests
• Easy recordkeeping
• 5 sensors testing

Technology from BW Clip

Configuring the BWC2-M

Why Buy the BWC2-M?

• Very light and will not weigh you down
• Affordably priced
• No maintenance works by pushing a button
• Loud 95 decibel alarm
• Can record the last 35 gas readings and bump tests
• Very tough - can withstand low temperatures and wet conditions
• The BWC2-M is smart. In fact, it tests its own sensor and battery

Part Number: BWC2M

BWC2-H515 BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 5 ppm / High - 15 ppm by BW Technologies

Hydrogen sulfide (H2S) is flammable and toxic at relatively low concentrations. It is essential to keep this potentially dangerous gas at safe levels, at all times. That is why many workers trust the BWC2-H515 by BW Technologies. This portable H2S detector is one of the most reliable and cost effective models you can buy, and it will perform constantly for two solid years, without any maintenance. You do not have to be concerned with battery charging or sensor replacement. The BWC2-H515 has a high alarm when H2S levels reach 15 ppm and a low alarm at 5 ppm (these are default settings).

If you put your BWC2-H515 in storage, it will prolong its life. For instance, 60 days on the shelf provides an additional 60 days of service (up to one year).

Your BWC2-H515 will seamlessly fit in with Fleet Manager II software and MicroDock II systems. In addition, it works especially well with IntelliDoX instrument management systems, and here are some of the things you receive:

• Test as many as 5 sensors at once
• Quick and efficient recordkeeping
• Fast bump testing capabilities
• Parameter and alarm set adjustment

BW Clip Technology

Standard features:

• Light and easy to carry
• Virtually maintenance free
• Operates with a single push button
• Self-testing sensor and battery
• 95 db alarm can also flash or vibrate
• Can withstand extreme working environment
• Affordable operating cost
• Remembers 35 bump tests and gas events

Configuring Your BWC2-H515

Part Number: BWC2H515

BWC2R-M2550 BW Clip RT 2 Year Single Gas Detector, Carbon Monoxide (CO), (Low 25 ppm / High 50 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-M2550

BWC2-M50200 BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 50 ppm / High - 200 ppm by BW Technologies

When you need accurate and dependable CO (carbon monoxide) detection, you can rely on the BW Clip BWC2-M50200. With some portable detectors you have to worry about charging or even changing batteries, but not with the BWC2-M50200. This portable gas detector is made to last for entire 2 years and it runs continuously. Simple to use and operate, you'll find the BWC2-M50200 maintenance free. The sensor never needs changing and the low alarm sounds at 35 ppm (parts per million). High alarm at 200 ppm (default).

The two years of operation can be as long as three years, if you need to store the unit. In fact, storage is proportional to longevity, and six months of hibernation gives you an additional six months of operation.

Compatibility

• Alarms and parameters are adjustable
• Test as many as five sensors at once
• Simple recordkeeping
• Fast bump testing

Gas Monitoring Technology

• Surecell™ by Honeywell has been extensively tested and designed to deliver quick performance in all kinds of environments. This assures worker safety and fewer problems.
• Reflex Technology™ - your gas monitor will automatically perform daily self testing.

Simple Configuration

7 Reasons to Purchase the BWC2-M50200

• Lightweight and easy to carry around.
• Affordable price
• Simple one button operation
• Easy to hear alarm (95db)
• Tracks last 35 bump tests and CO readings
• Made to perform flawlessly in damp and extreme temperature environments.
• Sensor and battery are self testing

Part Number: BWC2M50200

Single Gas Clip Plus

GGas Clip Technologies recently released their Single Gas Clip Plus. The Single Gas Clip Plus is the first and only portable handheld gas detection that comes standard with a hibernate mode. The hibernate mode is one of the latest advancements in personal monitoring technology designed to provide more convenient and cost efficient features for every day customers.

Exclusive Single Gas Clip Plus Features

The Single Gas Clip Plus can do it all. With the customer in mind, Gas Clip Technologies designed these features to save customers precious time and money. Some of these features include:

• Exclusive hibernate mode
• Status quo gas reading capabilities
• Adjustable alarm specifications
• A batter capacity that is 50% larger than competitors
• Two-way infrared communication for downloads, bump test, configurations, and updates
• Programmable 6 digit identification codes
• Bump check reminders
• Bump check and calibration confirmation and identification
• Docking capabilities

Hibernation and Extended Life

The hibernate mode of the Single Gas Clip Plus is one of the newest feature for this line of products. Gas Clip Technologies incorporated the feedback from its customers, and realized that customers needed a way to place their gas monitors in a rested state when not in use. Simply activate hibernate mode by syncing the unit with the infrared link or inserting the unit in the Clip Dock docking station. Because the unit hibernates and becomes inactive users can extend the life of their battery and their unit.

Cost Savings

With the extended life comes cost savings. With the Single Gas Clip Plus, users can extend the life of their monitor, and reduce the need to purchase replacement units. In the end, users will only pay for the time that is spent with the unit actually in use. Compare this to other models where the clip cannot hibernate. If the monitor only has a specified lifespan, the unit will reach that lifespan regardless of whether it is in use. Fortunately, the Single Gas Clip Plus does not operate this way. Users pay only for the time that they are actually using the clip.

Single Gas Clip Plus Specifications

The Gas Clip Plus is a handheld device with compact dimensions (3.37 x 1.97 x 1.95 inches) and is lightweight (2.7 ounces). The gas clip can operate in a wide range of temperature and relative humidity. The unit also features a triple alarm system with bright visual alarms, an ultra loud audio alarm of 95 decibels, and a vibrating alarm. The triple alarm system helps to ensure that the user and those nearby are properly notified of the potentially hazardous conditions regardless of their surroundings. The device has an operational life of two years and has comes available with a standard warranty.

Gas Clip Technologies

Gas Clip Technologies was founded by the industry s most experienced professionals. Their goal is to provide the world with zero maintenance gas detection systems that are reliable and customizable for any workplace need.

CCP-H-10 Crowcon Clip+ Maintenance Free Single Gas Monitor, H2S 10/15ppm by Crowcon

Reliable and durable fixed life monitoring in a compact and maintenance free package.

Available in two models, the Crowcon Clip has a 2 year life and is available for hydrogen sulphide (H2S), carbon monoxide (CO) or oxygen (O2). The Crowcon Clip+ has the innovative hibernate function, ideal for contractor or rental fleets where they wish to put the unit into standby mode. Offered for H2S or CO, this unit gives 24 months operation over a period of up to 3 years.

Offering event logging and designed to withstand the harshest industrial working conditions the Crowcon Clip range

• Hibernate functionality for contractor/rental fleets
• 24 months operation over 3 years
• H2S and CO options
• Ensures worker safety
• Reduces training time
• Removes the need for service and maintenance
• Offers adjustable alarm levels
• Real time gas reading or life left indication
• Self test functionality
• C-Test gas test and calibration station
• Event log with IR interface
• Programmable unit identification
• On screen and LED Gas (Bump) Test due indication
• IR Clip software

CCP-H-5 Crowcon Clip+ Maintenance Free Single Gas Monitor, H2S 5/10ppm by Crowcon

Reliable and durable fixed life monitoring in a compact and maintenance free package.

Available in two models, the Crowcon Clip has a 2 year life and is available for hydrogen sulphide (H2S), carbon monoxide (CO) or oxygen (O2). The Crowcon Clip+ has the innovative hibernate function, ideal for contractor or rental fleets where they wish to put the unit into standby mode. Offered for H2S or CO, this unit gives 24 months operation over a period of up to 3 years.

Offering event logging and designed to withstand the harshest industrial working conditions the Crowcon Clip range

• Hibernate functionality for contractor/rental fleets
• 24 months operation over 3 years
• H2S and CO options
• Ensures worker safety
• Reduces training time
• Removes the need for service and maintenance
• Offers adjustable alarm levels
• Real time gas reading or life left indication
• Self test functionality
• C-Test gas test and calibration station
• Event log with IR interface
• Programmable unit identification
• On screen and LED Gas (Bump) Test due indication
• IR Clip software

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.

Use to help reduce particulate and water ingress when sampling via a tube.

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.